Tracer-diffusion of Co2+ ions in some transition metal chloride solutions

Tracer-diffusion coefficients of Co²⁺ ions have been determined in 1% agar gel containing transition metal chlorides, viz. ZnCl₂, NiCl₂ and MnCl₂ over the concentration range of 10^–6–0.15 M at 25°C using the zone-diffusion technique. The results are compared with calculated values on the basis of Onsager's theory and the deviations are accounted for on the basis of various types of interactions in the ion-gel water system. Further, activation energy for the tracer-diffusion of Co²⁺ ions in the above mentioned electrolytes has been obtained as a function of electrolyte concentration, using measurements in the temperature range of 25–50°C. The trend in activation energy is explained on the basis of the WANG's model.     

Buffer Standards for the Physiological pH of Zwitterionic Compounds,MOBS and TABS from 5 to 55°C

The values of the second dissociation constant, pK₂, and related thermodynamic quantities of 4-(N-morpholino)butanesulfonic acid (MOBS) and N-tris(hydroxymethyl)-4-aminobutanesulfonic acid (TABS) have already been reported over the temperature range 5–55°C including 37{°}C. This paper reports the pH values of twelve equimolal buffer solutions at designated pH (s) with the following compositions: (a) mixtures of MOBS (0.05 mol-kg^–1) + NaMOBS (0.05 mol-kg^–1); (b) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1); (c) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1); (d) TABS (0.05 mol-kg^–1) + NaTABS (0.05 mol-kg^–1); and (e) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1); and (f) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1). Two buffer solutions have ionic strengths I= 0.05 mol-kg^–1, another two have I=0.08 mol-kg^–1, and the remaining two buffer solutions have I= 0.16 mol-kg^–1, which is close to that of the clinical fluids (blood serum). These buffers have been recommended as a useful pH standard for the measurements of physiological solutions. Conventional pH values of all six buffer solutions from 5–55°C, as well as those obtained from the liquid junction potential correction at 25 and 37{°}C have been calculated. The flowing-junction calomel cell has been utilized to measure E_j, the liquid junction potential.     

Kinetic model for the photoreactions of d0-oxo-complexes applied to SiO2

Based on literature data a kinetic model has been devised for the photoreactions of d⁰-oxo-complexes (Ti⁴⁺, V⁵⁺, Cr⁶⁺, Mo⁶⁺, and W⁶⁺) with H₂, alkanes, CO and alkenes, fixed on supports. Equations have been obtained for the rate and quantum yields of the reactions and photosphorescence.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 30, No. 5, pp. 268–271, September–October, 1994.     

Rare earth element complexation by fluoride ions in aqueous solution

Rare earth fluoride stability constants for Ce, Eu, Gd, Tb and Yb at 25°C have been determined by examining the influence of fluoride ions on the distribution of rare earths between tributyl phosphate (TBP) and 0.68M NaClO₄. Our results indicate that rare earth mono and difluoro complexation constants show a steady increase as a function of atomic number from La to Tb but remain relatively constant after Dy. This behavior is similar to that which has been observed for dicarboxylic acids. Stepwise stability constant ratios, K₂/K₁, obtained in our work (where K₁=[MF²⁺][M³⁺]^–1[F^–]^–1 and K₂=[MF ₂ ⁺ ]^–1[MF²⁺]^–1[F^–]^–1) indicated that, for all rare earths, K₂/K₁=0.09±0.03.     

Appearance of autocatalysis in the production of molecular hydrogen by a photoreaction on semiconductor heterojunctions

The photocatalytic evolution of H₂ from ethanol and aqueous solutions of Na₂SO₃ and Na₂S by suspensions of CdS/Cu²⁺ and CdS/Bi³⁺ microheterojunctions has been investigated. The appearance of autocatalysis has been obtained, attributed to a lowering of the energy barrier of the reaction; it is caused by a change in the work function of an electron from the palladium co-catalyst, due to its saturation by the product (hydrogen).Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 29, No. 5, pp. 435–440, September–October, 1993.     

Nonempirical calculations of potential-energy surfaces for nucleophilic addition of H− and F− to an acetylene molecule

The minimal energy paths for the nucleophilic addition of a hydride ion (H^–) and a fluoride ion (F^–) to a molecule of acetylene (A) have been calculated with the use of 3–21++G and 3–21+G double basis sets in the framework of the Hartree-Fock-Roothaan method. The values of the total energies of the reactants, transition states, and products have been refined by means of calculations with more complete basis sets [6–31++G// 3–21++G and 6–31++G*//3–21++G for reaction (1); 6–31+G*//3–21+G and 6–31++G**//3–21+G for reaction (2)] and by taking into account the correlation energy for reaction (1) in the framework of the SCEP/6–31++*//3–21++G method. It has been established that the activation energy of reaction (2) is 15.94 kJ/mole lower than that for reaction (1), that reaction (1) is exothermic, and that the enthalpy change accompanying reaction (2) is close to zero. The character of the distribution of the electron density along the minimal energy paths of both reactions has been analyzed, and the differences appearing as a result of the replacement of the soft nucleophile H^– by the harder nucleophile F^– have been ascertained. The results of the calculations have been compared with the results available in the literature for reaction (1).Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 149–155, March–April, 1989.     

Changes in Coordination Number of Co Ion and Fluorescence Spectrum of 1-Naphthol during the Sol-Gel Reaction of TEOS

Changes in coordination number of Co²⁺ and fluorescence spectra of 1-naphthol during the sol-gel transitions of TEOS have been investigated as a function of time. The change in the coordination number of Co²⁺ has been observed as follows. Six-coordinated Co²⁺ decreased quickly within several hours in the first stage of the reaction corresponding to water consumption by initial hydrolysis reaction. Then six-coordinated Co²⁺ increased around gelation due to polycondensation. After the gelation four-coordinated Co²⁺ increased, where isomorphous-replacement of Co²⁺ into the –O–Si–O– networks occurred. In the Co²⁺/1-naphthol mixed system, separate ion pair of 1-naphthol is preferentially coordinated on the six-coordinated Co²⁺ where water molecule(s) plays an important role to geometrical relaxation of excited-state 1-naphthol.     

Carbohydrates, amino acids, phytin, and macroelements of the herbage ofTrifolium pratense

Two monosaccharides have been found by paper chromatography in an aqueous extract of the herbage of red clover (Trifolium pratense). One of them has been identified as glucose. After hydrolysis of a dry water-soluble extract by paper chromatography in the presence of markers, galactose, arabinose, xylose, and mannose were detected. By paper chromatography in the presence of markers the amino acids phenylalanine, leucine (isoleucine), methionine, aspartic acid, proline, alanine, and histidine have been identified. Phytin with decomp. p 276°C has been isolated and identified, giving, after hydrolysis, inositol with mp 225–226°C, and Ca²⁺, Mg²⁺, and PO ₄ ^3– have been detected. The amount of ash in the herbage of clover is 8.4% and the amount insoluble in HC1 1.5%. The amounts of macroelements were determined by the flame photometry of a solution of the ash (mg–%): K⁺ 1620; Na⁺ 310; Ca²⁺ 1240; Mg²⁺ 1090.Pyatigorsk Pharmaceutical Institute. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 483–485, July–August, 1980.     

Spectra and structure of small ring compounds. LIX

The Raman (3200 to 10 cm^–1) and far infrared (380 to 60 cm^–1) spectra of gaseous fluorocyclobutane,c-C₄H₇F, have been recorded. A series of Q-branches observed in both of these spectra beginning at 166 cm^–1 with successive transitions falling to lower frequencies have been assigned to the ring puckering vibrations of both the low energy equatorial and high energy axial conformers. These data have been fit to an asymmetric potential function of the form:V (cm^–1)=(1.76±0.05)10³X+(4.88±0.28)10⁴X²+(2.12 ±0.16)10³ exp(–5.66±0.41)10X² with a reduced mass function ofg ₄₄= 0.00386–0.00295X+0.03485X²+0.1228X³ +0.3459X⁴, whereX is the ring puckering coordinate. Utilizing this potential, the difference between the puckering angles for the two conformers was calculated to be 4° with the equatorial conformer having the larger value of 28°. This potential function is consistent with an energy difference between the equatorial and axial forms of 447 cm^–1 (1.28 kcal/mol) and a barrier to ring inversion from the equatorial to the axial conformation of 713 cm^–1 (2.04 kcal/mol). Experimental values for the enthalpy difference between the two conformers have been determined for both the liquid (400±30 c^–1) and gas (413±43 cm^–1) from investigations of the Raman spectra at variable temperatures. The conformational stability, enthalpy difference, structural parameters, and fundamental vibrational frequencies, which have been determined experimentally, are compared to those obtained from ab initio Hartree-Fock calculations employing the 3-21G, 6-31 G^*, and 6-31 G^** basis sets.For part LVIII, seeStruct. Chem. 1991,2, 195.Taken in part from the thesis of M. J. Lee, which has been submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree, May 1991.     

Influence of some ions on the activity of cottonplant phytase

The activity of the phytase from cottonplant shoots has been studied. It has been shown that Ca²⁺ and Mg²⁺ ions in low concentrations weakly stimulate the activity of the phytase, while Fe³⁺, Zn²⁺, and Cu²⁺ ions are inhibitors. It is suggested that the Fe³⁺ and Cu²⁺ ions accumulating in the aleurone grains may fulfill the function of phytase inhibitors during the dormancy of the seeds.Tashkent Mirzo Ulugbek State University. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 341–342, May–June, 1998.     

Thermodynamics of the Second Dissociation Constant and Standards for pH of 3-(NMorpholino) Propanesulfonic Acid (MOPS) Buffers from 5 to 55°C

The second dissociation constant pK2 of 3-(N-morpholino)propanesulfonic acid (MOPS) has been determined at eight temperatures from 5 to 55°C by measurements of the emf of cells without liquid junction, utilizing hydrogen electrodes and silver–silver chloride electrodes. The pK2 has a value of 7.18 ± 0.001 at 25°C and 7.044 ± 0.002 at 37°C. The thermodynamic quantities G°, H°, S°, and C _p ^o have been derived from the temperature coefficients of the pK ₂. This buffer at ionic strength I = 0.16 mol-kg^–1 close to that of blood serum, has been recommended as a useful secondary pH standard for measurements of physiological fluids. Five buffer solutions with the following compositions were prepared: (a) equimolal mixture of MOPS (0.05 mol-kg^–1) + NaMOPS, (0.05 mol-kg^–1); (b( MOPS (0.05 mol-kg^–1) + NaMOPS (0.05 mol-kg^–1) + NaCl (0.05 mol-kg^–1); (c) MOPS (0.05 mol-kg^–1) + NaMOPS (0.05 mol-kg^–1); + NaCl (0.11mol-kg^–1); (d) MOPS (0.08 mol-kg^–1) + NaMOPS (0.08 mol-kg^–1); and (e)MOPS (0.08 mol-kg^–1) + NaMOPS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1).The pH values obtained by using the pH meter + glass electrode assembly are compared with those measured from a flow–junction calomel cell saturated with KCl (cell B), as well as those obtained from cell (A) without liquid junction at 25 and 37°C. The conventional values of the liquid junction potentials E _j have been obtained at 25 and 37°C for the physiological phosphate reference solution as well as for the MOPS buffers (d) and (e) mentioned above.     

The bonding between NO and the NiO(100) surface

Summary The interaction between NO and different possible adsorption sites of the NiO(100) surface is studied. The Ni²⁺ cation gives a bonding to NO in reasonable agreement with experiment, but only if a crystal potential corresponding to less than completely ionic charges is assumed. The computed angle of 43° is also in good agreement with experiment. O^1– sites in both weak and strong crystal potentials also give a strong interaction with NO, 1.3 and 0.5 eV, respectively. In this case the angle is larger or around 70°. The O^2– anion and Ni¹⁺ sites do not give any significant bonding irrespective of assumed crystal potential and can be excluded as adsorption sites. The computed vibrational frequency for the adsorbed NO show shifts of +50, –85 and –200 cm^–1 for adsorption on Ni²⁺ in the weak potential, and O^1– in strong and weak potential, respectively. Only one, downwards shifted, frequency has been observed in the experiment but the most likely candidate for the experimentally observed adsorption site with a binding of 0.5 eV, is still the Ni²⁺ in a weak potential. Nitrogen core level shifts are also computed and discussed and the fully screened core-hole state is obtained for a cluster model, NiF₄O+NO, of Ni²⁺ in NiO with an ionicity lower than the standard ± 2.This work is dedicated to Prof. Inga Fischer-Hjalmars     

Quantum-chemical study of the mechanism of the influence of cations of d metals on the rate of the oxidation of phosphine by Cu(II) halides

A hypothesis concerning the formation of associates between intermediate complexes and cations has been introduced in order to account for the experimental dependence of the rate constant of the oxidation of phosphine by Cu(II) halides on the nature of the cation in the salt MCl₂ (M = Mn, Co, Ni). The quantum-chemical characteristics of the systems formed have been calculated by the Mulliken—Wolfsberg—Helmholz-SCCC method. It has been shown that the correct correlation between the electronic properties of the intermediates and the rate constant of the reaction upon the variation of M can be obtained only for a specific mechanism for the addition of M²⁺ to the complex.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 6, pp. 718–722, November–December, 1985.     

Optical detection of Cu ion using a SQ-dye containing polymeric thin-film on Au surface

In this study, we have fabricated Cu²⁺ ion sensor using a squarylium dye (SQ-dye) containing polymeric thin-film. Surface Plasmon Resonance (SPR) was used as a signal amplifier to achieve high sensitivity and large linear dynamic range for detection of Cu²⁺ ion. High selectivity to Cu²⁺ ion was obtained by the effective electro-static interaction between SQ-dye and Cu²⁺ ion in the polymeric film. The optimal analytical condition of high selectivity and sensitivity in the wider linear dynamic range obtained in this study may be a result of the cooperative ‘hard-soft’ metal ion-ligand interaction and effective detection of refractive index changes by the complexation of Cu²⁺ ion and SQ-dye in SPR measurement. Among 10 different alkali metal, alkaline earth metal, and transition metal ions, SQ-dye in poly(vinylchloride)–poly(vinyl acetate)–poly(vinyl alcohol) (PVC–PVAc–PVA) copolymer film showed the highest selectivity to Cu²⁺ ion. Although the interaction between SQ-dye and metal ions has not been well understood, both cooperative ‘hard-soft’ metal ion-ligand interaction and size-selective recognition of Cu²⁺ ion to SQ-dye may contribute to high selectivity. Furthermore, additional sensitivity in the detection of Cu²⁺ ion by SPR was obtained by matching the wavelength of probing radiation of SPR and absorption maximum of SQ-dye at 675 nm, which allow to detect small changes in the refractive index by complex formation on the sensing surface. This result may apply in development of the Cu²⁺ ion selective sensor for medical, biochemical, and environmental applications.     

Combined Effects of Heavy Metal Ions on Bacteria and the Determination of Heavy Metals by Bioassay

In the framework of the development of bioassay, a procedure was developed for studying the combined effects of heavy metal ions on bacteria. The bacterium Bacillus subtilis niger was proposed as an analytical indicator. A universal calculation system was developed that allows one to obtain and analyze functional models of toxicity and the combined effects of toxicants. Models for the action of Zn²⁺–Cu²⁺, Zn²⁺–Cd²⁺, Zn²⁺–Cu²⁺–Cd²⁺, and Zn²⁺–Cu²⁺–Cd²⁺–Hg²⁺ mixtures on Bacillus subtilis niger were obtained and studied, and are discussed for the first time. The effect of the type of the nutrient medium on the character and structure of the combined effects was studied. The resulting models were applied to the determination of concentrations of heavy metal ions in mixtures.     

Ab initio Calculation of the charge distribution and the ligand field splitting in the tetrahedral halo complexes CuCl 4 2− 4 and NiCl 4 2−

The charge distribution and the ligand field splitting in the tetrachloro complexes CuCl ₄ ^2– and NiCl ₄ ^2– have been investigated by means of the restricted Hartree-Fock method. A rather large basis set of contracted Gaussian type orbitals has been employed. The charge distributions have been analysed by means of Mulliken population analyses. The ligand field splitting 10Dq has been compared with literature results known for the octahedral cluster NiF ₆ ^4– occurring in KNiF₃. A detailed analysis has been carried out for CuCl ₄ ^2– . From calculations on a selected number of states of NiCl ₄ ^2– the Racah parameters B and C have been obtained.     

Mechanism of the grafting of organosilanes on mineral surfaces. IV. Phenylderivatives of sepiolite and poly (organosiloxanes)

Grafting reactions of phenyl groups on silica substrates using as reagents various phenylsilanes with variable distances between the silicon atoms and the aromatic ring by 0, 1, and 2 methylene groups [Si–(CH₂) _n –C₆H₅] were studied. Two different silicates have been selected as source of silica: sepiolite and tetraethyl-orthosilicate (TEOS). Sulfonic- and nitro-derivatives prepared from these phenyl compounds by electrophilic substitution reactions, have been obtained. The mechanism of these processes has been studied in relation to the number of methylene separating groups belonging to the starting reagents. The characterization of such systems has been achieved by XRD,²⁹Si and¹³C NMR/MAS, IR, and laser microprobe mass spectrometry.Parts I, II and III published in this Journal (1978) 256:135–139, (1979) 257:178–181 and (1985) 263:1025–1030     

Spectra and Structures of Silicon-Containing Compounds. XXIV.* Raman and Infrared Spectra,r 0 Structural Parameters,Vibrational Assignment,Barriers to Internal Rotation,and Ab Initio Calculations of Ethylsilane

The infrared (3200 to 400 cm^–1) and Raman (3200 to 20 cm^–1) spectra of gaseous and solid ethylsilane, CH₃CH₂SiH₃, have been recorded. Additionally, the Raman spectrum of the liquid has been obtained with quantitative depolarization values. The SiH₃ torsional mode has been observed as sum and difference bands with the silicon-hydrogen stretching vibration. Utilizing the torsional fundamental frequency of 132 cm^–1 the threefold periodic barrier of 590 cm^–1 (7.06 kJ/mol) has been obtained. Utilizing the frequencies of the silicon-hydrogen stretches, Si-H bond distances of 1.485 and 1.484 Å have been obtained for the bonds gauche and trans to the methyl group, respectively. Using previously reported rotational constants from seven different isotopomers, the r ₀ parameters have been calculated and are compared to the corresponding r _s parameters. A complete vibrational assignment is proposed that is consistent with the predicted frequencies utilizing the force constants from ab initio MP2/6-31G(d) calculations. Both the infrared intensities as well as the Raman activities and depolarization values have been obtained from the ab initio calculations. Complete equilibrium geometries have been determined by ab initio calculations employing the 6-31G(d), 6-311 + G(d,p), and 6-311+G(2d,2p) basis sets at levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. The results are discussed and the theoretical values are compared to the experimental values when appropriate.     

The volume and compressibility change for the formation of transition metal sulfate ion pairs at 25°C

The apparent molal volume and adiabatic compressibilities of some transition metal (Mn²⁺, Co²⁺ Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺) sulfates have been determined at 25°C. Values of to 11.4 cm³-mole^–1 and to 31.3 × 10^–4cm³-mole^–1-bar^–1 at 1 atm were found for the formation of the transition metal sulfate ion pairs. These results are in good agreement with the values obtained from the high-pressure conductance measurements of Fisher et al., Shimizu et al., and Taniguchi et al. The volume and compressibility data indicate that 3.1±0.7 water molecules are lost when transition metals form ion pairs with SO ₄ ^2– . The fractions of inner-sphere ion pairs (20%) estimated in this study are in good agreement with the values obtained from ultrasonic measurements.     

Conformational Stability of Propenoyl Bromide from Temperature-Dependent Infrared Spectra of Krypton Solutions,Ab Initio Calculations,and r 0 Structural Parameters of the Propenoyl Halides (F,Cl, Br)

Variable temperature (–100 to –150°C) studies of the infrared spectra (3500–400 cm^–1) of propenoyl bromide, CH₂=CHCBrO, dissolved in liquid krypton, have been carried out. Utilizing six different conformer pairs, an enthalpy difference of 204 ± 20 cm^–1 (2.44 ± 0.24 kJ/mol) was obtained, with the anti conformer (carbonyl bond trans to C=C bond) the more stable form. At ambient temperature, there is approximately 28 ± 2% of the syn conformer present. The anti conformer also remains in the infrared and Raman spectra of the polycrystalline solid. The optimal geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies, are reported for both conformers from MP2/6-31G(d) ab initio calculations. The potential function governing the conformational interchange has been obtained from the MP2/6-31G(d) ab initio calculations. The conformational stabilities were calculated from a variety of basis sets and at the highest level of calculations, MP2/6-311 + (2df,2pd), the anti conformer is predicted to be more stable by 178 cm^–1, which is in excellent agreement with the experimental results. The r ₀ adjusted structural parameters have been obtained for propenoyl fluoride and chloride from a combination of the previously reported microwave rotational constants and ab initio predicted parameters. Several of the parameters for the chloride are significantly different than those proposed from an electron diffraction investigation. The results of these spectroscopic, structural, and theoretical studies are discussed and compared to the corresponding results for some similar molecules.