Modeling the wave parameters of a narrow slotted transmission line based on a superconducting film

An analytical expression for calculating the wave parameters of a narrow-slot transmission line is found in the quasistatic approximation. A two-fluid model is used for analyzing processes in a superconducting film of thickness comparable to the London penetration depth. The wave parameters of the slotted line are calculated under assumptions about the current distribution near the edges of the slot which are analogous to those used previously for analyzing microstrip and coplanar lines. Zh. Tekh. Fiz. 67, 94–97 (September 1997)     

High-Tc superconducting microwave phase shifter

The relation between the surface impedance Z_S(=R_S–jX_S) of superconductors and DC current I has been derived to determine the propagation constant of a superconducting microstrip line, and the relation between the phase delay of the superconducting microstrip line and DC current I is also presented. On the basis of these analytical results, a microwave phase shifter has been made by using YBCO superconducting thin film. In this paper, we describe the design principle of phase shifter, its fabrication, and present the experimental results. These measured values agree well with the theoretical curves.     

Input impedance calculation for a cylindrical microstrip antenna fed by a microstrip line

We consider the problem of excitation of a cylindrical microstrip antenna fed by a cylindrical microstrip line. The problem has been solved by the moments method in the spatial domain using a new representation of the Green’s function. In the model proposed, a cylindrical microstrip line of finite length is attached to the patch and is considered as its part. The so-called lumped delta generator is chosen as the excitation source. At the first stage, current distributions on the patch and in the microstrip line are found by solution of the integral equation. Then using the well-known relations of the transmission-line theory and the equivalent-scheme method, we calculate the reflection coefficient in the microstrip line and the antenna input impedance. Patches of different shapes are discussed. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 51, No. 3, pp. 223–233, March 2008.     

Terahertz Detection with Twin Superconductor-Insulator-Superconductor Tunnel Junctions

Terahertz detection with twin superconductor-insulator-superconductor （SIS） tunnel junctions, which are connected in parallel via an inductive thin-film superconducting microstrip line, is mainly studied. Firstly, we investigate the direct-detection response of a superconducting twin-junction device by means of a Fourier transform spectrometer. Secondly, we construct a direct-detection model of twin SIS tunnel junctions. The superconducting twin-junction device is then simulated in terms of the constructed model. The simulation result is found to be in good agreement with the measured one. In addition, we observe that the direct-detection response of the device is consistent with the noise temperature behaviour.     

Full-Wave Analyses for a Multi-Layered Microstrip Patch Antenna

This paper describes numerical modelling of a dual band multi-layered microstrip patch antenna operating at 35GHz on an in-house semi-insulating GaAs substrate. The simulated and measured resonant frequencies at both lower and upper resonant frequencies will be compared to check the accuracy of the different numerical modelling techniques.     

Characterization of Nb-Based Superconducting Microstrip Lines Around the Gap Frequency

Submillimter-wave SIS (superconductor-insulator-superconductor) mixers usually adopt SIS junctions associated with an integrated tuning circuit, which tunes out the junction's geometric capacitance and is typically an inductive thin-film superconducting microstrip line. This paper mainly investigates the characteristic of Nb-based superconducting microstrip lines around the junction's gap frequency, at which the surface resistance of Nb films becomes considerable, and its effect on the performance of SIS mixers.     

Support Vector Driven Genetic Algorithm for the Design of Circular Polarized Microstrip Antenna

In this paper, a hybrid soft computing method for designing specific microstrip antenna is presented. Evolutionary algorithm such as genetic algorithm (GA) is one of the promising ways of finding global optimum solution from a multivariate nonlinear feature space. Being a stochastic iterative algorithm, it requires much computation power when the function to be optimized is complex and time consuming. Various meta-modelling techniques such as neural network, response surface methods, kriging, etc. can be used to model the process under optimization in order to reduce the computational expenses. In this paper, we investigate one such technique – support vector regression (SVR) – to model the complex analytical process. The model, thus obtained, is used for optimization using genetic algorithms. This approach is demonstrated for the design of circular polarized microstrip antenna at 2.6 GHz band. The results of SVR model are compared with other meta-models generated with neural network and response surface methodology.     

Comparison of single-layer and bilayer InAs/GaAs quantum dots with a higher InAs coverage

Epitaxially grown self-assembled InAs quantum dots (QDs) have found applications in optoelectronics. Efforts are being made to obtain efficient quantum-dot lasers operating at longer telecommunication wavelengths, specifically 1.3 μm and 1.55 μm. This requires narrow emission linewidth from the quantum dots at these wavelengths. In InAs/GaAs single layer quantum dot (SQD) structure, higher InAs monolayer coverage for the QDs gives rise to larger dots emitting at longer wavelengths but results in inhomogeneous dot-size distribution. The bilayer quantum dot (BQD) can be used as an alternative to SQDs, which can emit at longer wavelengths (1.229 μm at 8 K) with significantly narrow linewidth (∼16.7 meV). Here, we compare the properties of single layer and bilayer quantum dots grown with higher InAs monolayer coverage. In the BQD structure, only the top QD layer is covered with increased (3.2 ML) InAs monolayer coverage. The emission line width of our BQD sample is found to be insensitive towards post growth treatments.     

Modeling of Multilayer Suspended Microstrip Line and its Discontinuities on CMOS Grade Silicon Substrate for Millimeter Wave Integrated Circuit Applications

Transmission line parameters such as characteristic impedance Z₀, effective dielectric constant ε_eff, attenuation constant α of suspended microstrip line on multilayer low resistively silicon substrate are investigated using full wave FEM simulator HFSS. Effect of variation in the thickness of Si₃N_4, polyimide and metal layers on attenuation are studied. Due to suspended nature, significant reduction in transmission loss is observed in the simulation at 60 GHz frequency. Discontinuities such as open end, gap and step in width of strip conductor are analyzed to extract their lumped equivalent circuits which can be used in the design of integrated circuits.     

Comparison of superconducting and electronic properties of σ-and A-15 phase Nb−Al

For both, the σ-phase and the A-15 phase structure of Nb−Al binary alloys the superconducting properties were investigated in connection with measurements of normal state electronic properties like resistance and NMR-frequency and line width. The A-15 phase shows a transition temperature ofT _c ≈17.5 K. The σ-phase shows only weak transitions at the same temperature which can be explained by A-15 inclusions in a non-superconducting σ-matrix. The Al²⁷-Knight shift at room temperature is reduced from 0.162% for pure Al to (0.024±0.002)% and (0.026±0.0025)% for the A-15 and the σ-phase, respectively. The corresponding temperature coefficients differ in sign: positive for the A-15 and negative for the σ-phase; this may have a relation to the different superconducting properties. The NMR line width and the resistance show no different behaviour for the two phases. In general, the electronic properties seems to be less important for the occurance of superconductivity in the Nb−Al system than the lattice structures.     

An approach for small omnidirectional microstrip antennas based on the backward waves of double negative metamaterials

In this paper, a small omnidirectional microstrip antenna (MSA) is proposed based on a compact double negative (DNG) metamaterial, which is constructed by modified split ring resonators (MSRRs) and metal strips. First, the backward wave property of the DNG slab is investigated and illustrated by full-wave simulations. It is shown that the slab can exhibit double negative parameters and support backward wave in a broadband of 8.45 GHz∼11.05 GHz, so the existence of the DNG band is proven. Then the DNG unit cells are stacked and embedded into a host substrate to construct a phase-compensating substrate for the small MSA. By using the modified transmission line model (MTLM) and 3D full-wave simulation, a small MSA is modeled and characterized. Results show that the presence of the DNG fillings can indeed greatly reduce the physical dimensions from 0.5λ to 0.17λ, while its farfield pattern is significantly different from that of a conventional half-wave-length MSA. Lastly, the E-field distributions of the small MSA and a conventional half-wave-length MSA are contrasted and discussed to explain the functional mechanism of the small omnidirectional SMA. PACS 78.70.Gq; 81.05.Zx; 84.40.Ba     

高温超导双工器综合与设计

介绍了一种高温超导双工器的设计方法.双工器包含一个公共节点和两个带通滤波器.作者使用开环半波长谐振器作为公共节点用于合并两信道滤波器,同时作为消纳网络消除滤波器之间的影响.各信道滤波器均包含了六个带折叠耦合线的发卡型谐振器,利用跨线引入交叉耦合.该高温超导双工器工作在c波段,仿真结果与理论计算结果相一致,说明了该设计方...     

Control of the sensitivity of CRLH interdigital microstrip balanced structures using a co-design genetic algorithm approach

A fully automated tool for designing CRLH interdigital microstrip structures using a co-design synthesis computational approach is proposed and demonstrated experimentally. This approach uses an electromagnetic simulator in conjunction with a genetic algorithm to synthesize and optimize a balanced CRLH interdigital microstrip transmission line. The high sensitivity of a long balanced transmission line to fabrication tolerances is controlled by the use of a high precision 3D simulator. The 2.5D simulator used was found insufficient for a large number of unit cells. A 13 UC CRLH transmission line is designed with the proposed approach. The response sensitivity of the balanced transmission lines to the over/under-etching factor is highlighted by comparing the measurements of four lines with different factors. The effect of over/under-etching is significant for values larger than 10 μm.     

Calculation of accurate CO2 laser transition frequencies and their standard deviations

The paper is based on C¹²O₂ ¹⁶ rotational constants and line frequency data gained from laser frequency measurements performed recently. Equations for transition frequencies and their standard deviations have been derived. A list is presented containing accurate 10.4 and 9.4 μm line frequencies and their relative and absolute standard deviations; also wavenumbers and wavelengths are given for each line. For transitions usually observed in CO₂ lasers the relative standard deviations are on the order of a few megahertz, the absolute accuracy is about 25 MHz for the 10.4 μm band and about 18 MHz for the 9.4=μm band.     

A new type of HTc superconducting film comb-shape resonator for radio frequency superconducting quantum interference devices

A new type of HTc superconducting film combshape resonator for radio frequency superconducting quantum interference devices (RF SQUID) has been designed. This new type of superconducting film comb-shape resonator is formed by a foursquare microstrip line without a flux concentrator. The range of the center frequency of this type of resonator varies from 800 MHz to 1 300 MHz by changing the length of the teeth. In this paper, we report on simulating the relationship of the value of the center frequency and the length of the teeth, and testing the noise of HTc RF SQUID coupling this comb-shape resonator. __________ Translated from Chinese Journal of Low Temperature Physics, 2005, 27(3) (in Chinese)     

Synthesis of Functionalized ZnSe Nanoparticles and Their Applications in the Determination of Bovine Serum Albumin

Luminescent quantum dots (QDs)-semiconductor nanocrystals were promising alternative to organic dyes for fluorescence-based applications. In this paper, we developed procedures to use mercaptoacetic acid (MAA) to modify ZnSe nanoparticles and made the nanoparticles to be soluble for the quantitative and selective determination of bovine serum albumin (BSA). Maximum fluorescence intensity was produced at pH 7.0, with excitation and emission wavelengths at 242 and 348 nm, respectively. Under optimal conditions, the straight line equation: ^△ F = 0.38 + 0.34 C (μg/ml) was found between the relative fluorescence intensity and the concentration of BSA in the range of 9.6–124.8 μg/ml, and the limit of detection was 2 μg/ml.     

Bragg Reflectors and Resonators in Microstrip Technology Based on Electromagnetic Crystal Structures

Recently, new promising two-dimensional (2-D) Photonic Bandgap Structures (PBG), or more properly Electromagnetic Crystal Structures, for microstrip lines have been proposed. In this paper, we analyze these structures in a manner like a Bragg reflector in optical wavelengths. Joining two of such Bragg like reflectors by means of a conventional microstrip transmission line allows one to design Bragg Resonators. The 2-D periodic pattern of the electromagnetic crystal structure is implemented with circles etched in the ground plane of the microstrip line by means of a numerical milling machine. Simulations have been performed by using HP ^TM Momentum and MDS software, and in accordance with the measurements give, for the Electromagnetic Crystal Structures, new promising potential applications both in microwave and millimeter wave integrated circuits, and also in the experimentation of expensive short wavelength (including photonic) devices by using simpler and cheaper microwave down scaling.     

Incommensurateness effects in a lattice Ginzburg-Landau model

This paper discusses the effect of magnetic translational symmetry on the vortex structure in superconducting crystals with a large basis in artificial Josephson media (regular lattices of superconducting clusters) prepared with opal as the base material. For external magnetic fields lower than the upper critical field, the lattice Ginzburg-Landau model reduces to the two-dimensional Frenkel’-Kontorova model which in some cases is exactly solvable, in which the crystal lattice plays the role of an “hard sublattice” while the deformable vortex lattice plays the role of a “soft sublattice.” It is shown that static shear waves in the vortex lattice are solutions to the two-dimensional sine-Gordon equation with an additional condition of incompressibility implied by flux quantization. The pinning energy is found as a function of the magnetic field, nearness to the transition line, and the crystal lattice constant. Fiz. Tverd. Tela (St. Petersburg) 39, 1158–1162 (July 1997)     

Excitation frequency effects on atmospheric-pressure helium RF microplasmas: plasma density,electron energy and plasma impedance

The effects of the driving RF frequency on the properties of low temperature atmospheric pressure helium microplasmas are discussed in light of simulation results of a 500 μm microdischarge driven at constant input power with a 10 MHz–2.45 GHz voltage source. The electron density is found to be a non-monotonic function of the driving frequency and agrees with experimental observations made in different frequency bands with different devices. The physics underpinning this non-monotonic behaviour are investigated and the increasing penetration of the electric field as frequency increases is identified as a key factor. Additionally, the relationship between the plasma impedance and the mean plasma density is studied, and the validity and accuracy of equations commonly used to infer the plasma density from experimental impedance measurements discussed. While this method can provide quantitative estimations, the accuracy suffers when the discharge operates in the γ-mode or when the displacement current across the bulk plasma is not negligible.     

基于特征基函数的球面共形微带天线阵列分析

采用全波分析法对球面共形微带天线阵列进行了分析.相比体-面积分方程,采用球并矢格林函数的面积分方程法可以大幅减少未知量的数目,进而缓解计算机内存压力.微带天线阵列表面采用曲面三角形剖分,可较精确地模拟球面特性.首先,引入边界电荷以及半Rao-Wilton-Glisson基函数,成功实现了探针馈电,并采用镜像法解决了馈电边处线积分奇异问题.然后,采用特征基函数法降低了阻抗矩阵的阶数,并采取有效措施进一步节省内存和计算时间.最后,分析计算了不同尺寸的球面共形微带天线阵列的输入阻抗及远区场特性.与文献和仿真软件结果进行比较,证明了所提出的处理方法的正确性和有效性.