共查询到20条相似文献,搜索用时 31 毫秒
1.
The optical properties of graphene coated D-shaped single mode fiber and photonic crystal fiber are numerically analyzed. Enhancement of the graphene-light interaction is found in graphene coated D-shaped photonic crystal fiber,which introduces a tunable polarization of the D-shaped fiber by changing the chemical potential of the coated graphene.An optimal polarizer model is demonstrated with the extinction ratio of 66.26 dB/mm and the insertion loss of 9.4 dB/mm.The modulator extinction ratios of the TE mode and TM mode are 11.5 dB and 5 dB, respectively, with a device length of100 μm. This paper provides a theoretical reference for the optical property research of the graphene fiber. 相似文献
2.
A Strip-Loading Optical Waveguide Using Well Poled Stability Organic/Inorganic Hybrid Materials
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
An optical waveguide for a polymer modulator based on organic/inorganic hybrid electro-optic (EO) materials is designed and fabricated by utilizing a strip-loading structure. This hybrid material has a controllable refractive index, high EO coefficient and good poled stability, which are suitable for the EO modulators and switches. The embedded waveguide made of the above EO material can reduce the coupling loss. The light is coupled into the guided-core layer and then undergoes a transition from the buried waveguide into the EO material. Obvious modulation is observed by application of ac voltage to the EO material. The measured Vπ of co-planar waveguide (CPW) is 5 V for the Mach-Zehnder (MZ) modulator in length of 3.5cm. 相似文献
3.
Silicon-on-Insulator Based Electro-optic Variable Optical Attenuator with a Series Structure
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
An electro-optic variable optical attenuator in silicon-on-insulator is designed and fabricated. A series structure is used to improve the device efficiency. Compared to the attenuator in the single p-i-n diode structure in the same modulating length, the attenuation range of the device in the series structure improves 2-3 times in the same injecting current density, while the insertion loss is not affected. The maximum dynamic attenuation of the device is greater than 30dB. The response frequency is obtained to be about 2 MHz. 相似文献
4.
Investigation of the mode splitting induced by electro-optic birefringence in a vertical-cavity surface-emitting laser by polarized electroluminescence
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The mode splitting induced by electro-optic birefringence in a P-I-N InGaAs/GaAs/A1GaAs vertical-cavity surface- emitting laser (VCSEL) has been studied by polarized electroluminescence (EL) at room temperature. The polarized EL spectra with E||[110] and E || [150] directions, are extracted for different injected currents. The mode splitting of the two orthogonal polarized modes for a VCSEL device is determined, and its value increases linearly with the increasing injected current due to electro-optic birefringence; This article demonstrates that the polarized EL is a powerful tool to study the mode splitting and polarization anisotropy of a VCSEL device. 相似文献
5.
A novel 1.55-μm spot-size converter integrated electroabsorption modulator was designed with conventional photolithography and chemical wet etching process. A ridge double-core structure was employed for the modulator, and a buried ridge double-core structure was incorporated for the spot-size converter. The passive waveguide was optically combined with a laterally tapered active waveguide to control the mode size. The figure of merit is 4.1667 dB/V(/100μm) and the beam divergence angles in the horizontal and vertical directions were as small as 11.2° and 13.0°, respectively. 相似文献
6.
Thermally Stable Guest-Host Polyetherketone Poled Polymer for Electro-Optical Applications
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
《中国物理快报》2002,19(8):1125-1127
The high glass transition temperature polymer polyetherketone doped with disperse red 13 (DR13/PEK-c) has been prepared by the spin-coating method.Through in situ second-harmonic generation,the corona poling temperature was optimized by measuring the temperature dependence of the in situ second-harmonic generation signal intensity under the poling electric field.The linear electro-optic coefficients of the poled polymer films have been determined at 632.8 nm by using a simple interferometric technique.The polymer system was measured after 13000h,and found that it remained at 80% of its initial value. 相似文献
7.
A novel 1.55-μm spot-size converter integrated electroabsorption modulator was designed with conventional photolithography and chemical wet etching process. A ridge double-core structure was employed for the modulator, and a buried ridge double-core structure was incorporated for the spot-size converter. The passive waveguide was optically combined with a laterally tapered active waveguide to control the mode size. The figure of merit is 4.1667 dB/V(/100 μm) and the beam divergence angles in the horizontal and vertical directions were as small as 11.2°and 13.0°, respectively. 相似文献
8.
Low insertion loss silicon-based spatial light modulator with high reflective materials outside Fabry–Perot cavity
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
《中国物理 B》2019,(10)
The extinction ratio and insertion loss of spatial light modulator are subject to the material problem, thus limiting its applications. One reflection-type silicon-based spatial light modulator with high reflective materials outside the Fabry–Perot cavity is demonstrated in this paper. The reflectivity values of the outside-cavity materials with different film layer numbers are simulated. The reflectivity values of 6-pair Ta_2O_5/SiO_2 films at 1550 nm are experimentally verified to be as high as 99.9%. The surfaces of 6-pair Ta_2O_5/SiO_2 films are smooth: their root-mean-square roughness values are as small as 0.53 nm. The insertion loss of the device at 1550 nm is only 1.2 dB. The high extinction ratio of the device at 1550 nm and 11 V is achieved to be 29.7 dB. The spatial light modulator has a high extinction ratio and low insertion loss for applications. 相似文献
9.
Xuecheng Liu Bing Xiong Changzheng Sun Jian Wang Zhibiao Hao Lai Wang Yanjun Han Hongtao Li Jiadong Yu Yi Luo 《中国光学快报(英文版)》2021,(6):81-86
A novel thin-film lithium niobate(TFLN) electro-optic modulator is proposed and demonstrated. Li Nb O_3-silica hybrid waveguide is adopted to maintain low optical loss for an electrode spacing as narrow as 3 μm, resulting in a low halfwave-voltage length product of only 1.7 V·cm. Capacitively loaded traveling-wave electrodes are employed to reduce the microwave loss, while a quartz substrate is used in place of a silicon substrate to achieve velocity matching. The fabricated TFLN modulator with a 5-mm-long modulation region exhibits a half-wave voltage of 3.4 V and a merely less than 2 d B roll-off in an electro-optic response up to 67 GHz. 相似文献
10.
Poled Silica/DR1 Films with Thermally Stability and Large Electro-Optic Coefficient Applying in External Probe Tip
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Sol-gel-processed silica films doped with Disperse Red 1(DR1) were prepared at 80℃ aging temperature and 120℃ baking temperature with corona poling to obtain stable and large electro-optic (EO) coefficient and film strength. A large EO coefficient of γ33 = 56 pm/V was measured for the film of 05μm thickness at the wavelength of 1300nm, and the value was unvaried at room temperature. Moreover, an external EO probe tip using the film was fabricated for the first time, and a signal voltage level corresponding to the EO signal was calibrated successfully. 相似文献
11.
We present a fully stabilized Yb-fiber frequency comb locked to a microwave standard and an optical reference separately. The carrier-envelope offset frequency is generated by a standard f–2f interferometer with 40 dB signal-tonoise ratio. The offset frequency and the repetition rate are stabilized simultaneously to the radio frequency reference for more than 30 hours, and the fractional Allan deviation of the comb is the same as the microwave standard of 10-12 at 1 s.Alternatively, the comb is locked to an ultra-stable optical reference at 972 nm using an intracavity electro-optic modulator,exhibiting a residual integrated phase noise of 458 mrad(1 Hz–10 MHz) and an in-loop tracking stability of 1.77× 10-18 at 1 s, which is significantly raised by six orders comparing to the case locked to the microwave frequency standard. 相似文献
12.
Double-Arched LD Array Stagger Pumped Electro-Optic Q-Switched Nd:YAG Laser without Water Cooling
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
We report an experimental study on a double-arched LD array stagger pumped electro-optic Q-switched Nd:YAG laser without water cooling by using a convex-concave compensate resonator. Perfect matching of the gain field inside the rod and the fundamental mode of the cavity is made by this structure. When the repetition rate is 20 Hz, A maximum output energy at 1064 nm wavelength of 176 mJ (M2=1.55) and 9.6 ns FWHM pulse width in fundamental mode Q-switch operation is obtained with LD injection current 120 A. The optical-optical conversion efficiency is 14.7%, the divergence angle of the output beam is about 1.8 mrad. 相似文献
13.
We report the experimental realization of a magneto-optical trap (MOT) of ^174 Yb atoms operating on the ^1 So -^3 P1 intereombination transition at 555.8nm. The green MOT is loaded by a Zeeman-slowed atomic beam. In order to increase the capture velocity of the MOT, we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator. The trapped atomic number of the ^174Yb isotope is about 6.2 × 105, and the temperature of the cold atomic cloud is estimated to be about 100μK. The success of the green MOT is an clock. important step towards the goal of an ytterbium optical 相似文献
14.
A special-velocity-matched electro-optic(EO) phase modulator employing a microwave resonant design in lithium niobate is presented.Both the microwave property and phase-modulation performances of the 3.25-GHz modulator agree well with the numerical simulations.Using this modulator in a single-pass configuration with 1-kW microwave drive power,the spectral bandwidth of a 1 053-nm,3-ns pulse-length laser is broadened to 0.13 nm.With a clear aperture of 5×5(mm),the modulator is suited for twodimensional smoothing by spectral dispersion in high power laser systems. 相似文献
15.
A compact electro-absorption modulator based on graphene photonic crystal fiber is proposed. To enhance the graphene–light interaction efficiency, the innermost six air-holes of photonic crystal fiber are replaced by two large semicircular holes, and monolayer graphene is deposited on the two large semicircular holes. By optimizing the structure parameters, a strong graphene–light interaction is obtained. Moreover, the switch on–off point of the modulator is unchangeable,which is only related to the frequency of the incident light. The influence factors of this composite structure have been analyzed. The proposed modulator is compared with other graphene-based modulators, and the results show that it is filled without dielectric spacer. There are some excellent performances, such as an extinction ratio 7 dB of y-polarization mode,3-dB modulation bandwidth of 70 GHz with small footprint of 205 μm, and a consumption of energy per bit 59 pJ/bit. 相似文献
16.
In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser(VCSEL). The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios(SMSRs) are more than 30 dB with increasing temperature and current, respectively. 相似文献
17.
An efficient and high power 1053 nm electro-optic Q-switched Nd:LiLuF4 laser, end-pumped by two fiber coupled laser diodes at wavelength 806 nm, is reported for the first time. With an incident pump power of 24.4 W, the maximum laser output power of 7.3 W is achieved in free-running mode, and the optical conversion efficiency is 29.8%. For the Q-switched operation, the shortest pulse width of 17ns is obtained at the pulse repetition rate of 500 Hz, corresponding to the pulse energy of 5.9mJ with the peak power of 0.35 MW. 相似文献
18.
A high-permittivity (high-k) material is applied as the gate dielectric layer in a silicon metal-oxide- semiconductor (MOS) capacitor to form a special electro-optic (EO) modulator. Both induced charge density and modulation efficiency in the proposed modulator are improved due to the special structure design and the application of the high-k material. The device has an ultra-compact dimension of 691 μm in length. 相似文献
19.
Photonic crystal fiber polarization filter with two large apertures coated with gold layers
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A novel photonic crystal fiber(PCF) polarization filter is designed and fabricated; it consists of two large apertures coated with gold. The asymmetric structure separates the resonance position in the vertical direction well. Due to the metal layer covering, loss is greatly improved. Finite element method is applied for numerical simulation. The influences of varying gold thickness and varying the diameters and the center positions of the larger apertures on filtering performance are evaluated. Theory of coupling between surface plasma and core mode is introduced. By modulating the parameters, we realize a single polarization filter at 1.31 μm and 1.55 μm. The basal mode loss in the y direction can reach 1408.80 dB/cm at 1.31 μm and 1911.22 dB/cm at 1.55 μm respectively, but basal mode loss in the x direction is relatively small, 0.82 dB/cm and 1.87 dB/cm. In addition, two kinds of broadband polarization filters are proposed. If the fiber length is set to 200 μm,the extinction ratio is greater than 20 dB with width of 570 nm and 490 nm. The filter has simple structure and excellent performance. 相似文献
20.
A tunable Fabry-Perot (F-P) filter by using electro-optic polymer film is proposed. The electro-optic polymer is alkoxysilane dye (ASD)/SiO2-TiO2 hybrid material, whose electro-optic coefficient 733 is about 5 pm/V, The wavelength tuning range of 3.8 nm under 400-V DC voltage and the nonlinear characteristic with the electric field have been obtained via electro-optical properties of polymer. Both of polymer film fabrication and F-P filter design have been introduced. The tunable F-P filter is designed for the application of two-input/two-output port wavelength-selective optical switch. Also, some problems have been discussed in this letter. 相似文献