ARJ21客机降落阶段起落架噪声试验研究

为了测量ARJ21客机的起落架噪声,在飞行现场分别采用改进的频域波束形成和解卷积算法对降落阶段的起落架噪声进行了测量。通过比较两种算法发现,解卷积算法比改进的频域波束形成算法具有更好的声源识别能力。为了提高传声器的利用率,设计了多臂螺旋阵,并且利用线性插值消除了多普勒效应。根据主起落架和前起落架的分布位置不同,将声源识别区域划分为两部分,在140—800Hz范围内对不同频段的1/3倍频程的起落架噪声进行了测量。结果发现:在250 Hz以上频段,主起落架为主要噪声源,且在中心频率500 Hz的1/3倍频程内为唯一强声源;前起落架在中心频率630 Hz的1/3倍频程内为主要噪声源。通过试验得到了主起落架和前起落架噪声在不同频段的分布特点,为起落架降噪设计提供了支持。      

基于波束形成的多类型多声源定位研究

为实现空压机多噪声源的准确定位,仿真对比了多种近场球面波多声源定位算法。基于时域波束形成,研究了相同声源平面、不同声源频率、不同声源纵向距离、不同声源强度下多声源定位以及声源频率、声源纵向距离和声源强度多因素联合的多声源定位仿真方法,模拟了更接近实际的噪声源类型。基于频域波束形成,仿真研究了1400 Hz,2400 Hz,3400 Hz,4400 Hz的多声源。分别利用互功率谱波束形成和除自谱的互功率谱波束形成,仿真研究了相干声源和不相干声源。开发了阵列声成像测试平台,运用频域波束形成和功率谱波束形成对空压机进行了定位试验研究。结果表明,1400 Hz下空压机的主要噪声源是气缸盖、空气滤清器和曲轴附近的机体,这可为空压机减振降噪改进设计提供依据。     

基于DAMAS算法的气动噪声定位研究

反卷积DAMAS算法能有效地消除传统波束成形算法对结果的误解,更准确地计算出声源位置和声源强度。求解线性方程组时,DAMAS算法能更好地考虑不同网格位置的相互影响,使旁瓣变小甚至消失,呈现更直接的结果。本文首先介绍了DAMAS算法的原理;再分别运用波束成形算法和DAMAS算法对一台1.5 MW风力机的单频点声源、字样"UCAS"复杂线声源、翼型尾缘下游线声源进行模拟定位;最后运用波束成形算法和DAMAS算法对1.5 MW风力机的声源进行了实验定位研究。     

数控传声器阵列反卷积法对飞机噪音的应用与实验研究

本文主要讨论传声器阵列反卷积法对于飞机发动机噪音测量的实际应用及反卷积法对于飞机过顶测噪的数值模拟。传统"波束成型法"的成像是点源与点分布函数卷积的结果,只有在满足瑞利限制的前提下可以分辨多个相距较近的声源。本文介绍了一种简称反卷积法的传声器阵列新方法,它是将原有的Beamforming结果作为已知条件,从中提取有用的声源信息,去除掉旁瓣的干扰,使得处理出来的声源幅值与位置更加准确。观察运动声源会产生多普勒效应,特别是在频域中处理声信号时会使发声源产生频率偏移,因此在反卷积法使用前引入平均多普勒频移因子,它使得运用反卷积法在频域中预测飞机进场噪音成为可能。     

水下水平阵对空中运动声源的线谱探测

由于空气、海水介质声阻抗差异巨大,空中声源辐射的噪声透射入水的能量损失很大,加之水中声源目标的干扰,从水下探测空中声源相对困难。海试数据分析表明,空中高速运动声源噪声透射入水后信号较弱,在频繁存在干扰的水下声场环境中,常规宽带波束形成方法难以生效.针对空中声源普遍存在线谱的特点,首先利用线谱识别、提取与跟踪以及线谱加密技术对水下水平阵接收信号进行线谱分析,再通过剔除强干扰目标的线谱,成功分离出包含空中声源的线谱信号,实现对空中运动声源的探测,最远距离达16.8 km。通过理论和实验数据分析,验证了探测结果的正确性.      

近场反卷积聚焦波束形成声图测量

为了提高声图测量中对多个声源的分辨能力和定位精度,给出了一种近场二维反卷积聚焦波束形成声图测量方法。推导了水下声图测量的广义卷积模型,根据声图测量中点传播函数移变但可预测的特点,通过预存点传播函数字典的方式,将波束形成过程中的卷积问题转化成叠加积分问题,并应用二维Richardson-Lucy迭代算法实现了二维移变模型情况下的近场二维反卷积求解,从而实现高分辨声图测量。通过仿真和海试对比了反卷积、常规声图测量和MVDR声图测量的性能,结果表明反卷积算法在500次迭代情况下聚焦峰尺度小于另外两种算法的1/2,旁瓣级下降超过6 dB.      

双面声阵列波束形成的正则化改进算法

双面声阵列波束形成能够区分识别位于不同扫描平面的相干声源,然而该算法在低信噪比条件下识别精度较低。针对此问题提出一种迭代正则化改进算法,通过迭代方法更新正则化矩阵与波束形成输出,在不断提升正则化稳定性、抑制干扰旁瓣的基础上使声学云图主瓣向实际相干声源点处聚焦。数值仿真与实验算例结果显示,改进算法在中高频代表频率下能够正确区分相干声源前后方位,并具有相对原算法更高的识别精度。从而表明:从反问题正则化角度对原算法进行优化改进是理论可行的;正则化矩阵的具体形式与广义逆波束形成输出的空间分辨率紧密相关,且可通过迭代方法将二者整合以提高声源识别精度。      

旋转运动声源的频率波动修正波束形成方法

针对前飞状态的旋翼气动噪声信号频率存在周期性波动,且频域波束形成方法只能应用于稳态声源的问题,提出一种频率波动声源的波束形成方法.该方法利用已知的声源频率变化规律进行频率修正,在时域将频率波动信号等效为单频信号,基于该单频信号进行波束形成声源定位,实现了旋转运动的频率波动声源准确定位.数值仿真结果表明,提出的方法能够在...     

基于波束形成缩放声强的声源局部声功率计算

基于波束形成法识别噪声源时,为计算主要噪声源的辐射声功率,给出了基于平面波模型的声强缩放方法,模拟计算了单极子点声源局部声功率的计算误差,结果显示:当阵列平面与声源计算平面间距离等于阵列直径时,基于波束形成缩放声强计算的声功率误差仅略高于0.1 dB。为克服旁瓣干扰,给出了具有一定动态范围的声源计算平面积分法,模拟计算了单极子点声源的局部声功率,结果表明:该积分法的计算值与主瓣区域积分法的计算值近似相等,均约等于理论声功率。进一步,波束形成法与声强法的对比算例试验验证了基于波束形成缩放声强计算声源局部声功率方法的有效性。      

近场反卷积聚焦波束形成声图测量

为了提高声图测量中对多个声源的分辨能力和定位精度,给出了一种近场二维反卷积聚焦波束形成声图测量方法。推导了水下声图测量的广义卷积模型,根据声图测量中点传播函数移变但可预测的特点,通过预存点传播函数字典的方式,将波束形成过程中的卷积问题转化成叠加积分问题,并应用二维Richardson-Lucy迭代算法实现了二维移变模型情况下的近场二维反卷积求解,从而实现高分辨声图测量。通过仿真和海试对比了反卷积、常规声图测量和MVDR声图测量的性能,结果表明反卷积算法在500次迭代情况下聚焦峰尺度小于另外两种算法的1/2,旁瓣级下降超过6 dB.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.