任意分布载荷下两对边简支单向非均匀变厚度矩形板的弯曲问题*

本文使用阶梯折算法[1,2],研究了任意分布载荷下两对边简支(x=0和x=a边)单向非均匀变厚度(D=D(y))矩形板的弯曲问题,得到了问题的阶梯近似解,文末对静水压力作用下四边简支线性变厚度正方形板的弯曲作了数值计算,所得结果与[3]一致,这样便验证了阶梯折算法的准确性.     

中心开口圆底扁薄球壳在任意分布横向载荷下的弯曲问题的一般解

本文在文献[1]的某些启示下,求出了任意分布载荷下中心开孔圆底扁薄球壳弯曲问题的一般解.就作者所知,目前各国已发表有关这类问题的文献为数并不多.     

Poincaré非线性振动理论在连续介质力学中的推广(Ⅱ)——若干应用

文本是文[1]的继续.文[1]中,提出和建议使用非线性偏微分方程直接摄动与加权积分方程法,计算连续介质系统的共振与非共振周期解.本文中,应用该方法计算了定跨度弹性梁在各种常见边界条件下强迫振动的共振与非共振周期解,方板在集中周期荷载作用下的共振周期解.指出了,非主振型对非线性振动周期解的影响及静荷载对幅频特性曲线的影响.     

非均匀变截面梁动力响应的一般解

本文利用精确解析法[1]给出非均匀变截面梁在任意谐振荷载和边界条件下的动力响应的一般解.问题最后归结为求解一个非正定微分方程.对于这一问题用一般变分法求解失败,利用本文的方法,这个问题的一般解可以写成解析的形式.因此对优化特别方便.本文给出收敛性证明.文末给出的算例表明本文的方法可获得满意的结果.     

自重作用下的圆环薄壳

本文得到了等厚度圆环薄壳在自重荷载下一种简化形式的Новожилов方程,用Fourier级数求得了方程的特解.利用文[2]已有的齐次解结果,从而给出了问题的一般解.作为结果的应用,文中给出了两个算例.     

也谈一类线性方程组的解的公式

<正> 对于线性方程组(2),[1]只对 m=0,h=1的情形进行了讨论,没有给出解的公式.而[2]即使给出了解的公式,那也只是在 m 为整数,且 h=1的特殊情况下得出的.且所给出的公式使用时也很麻烦.面对着这个问题,本文将给出当 m 与 h 为任意实数时方程组(2)的解的公式.     

解任意四边形板弯曲问题的样条有限元法

关于用样条函数解板的弯曲问题,[1]在1979年讨论了矩形板和菱形板的弯曲;[2]在1981年对简支边界条件的矩形板,用振动梁函数和B样条函数组合作为插值函数,得到了效率更高的算式;[3]在1984年对[2]作了补充,采用拉格朗日乘子法,得到了在各种边界条件下平板弯曲的近似解,但所讨论的仍然是矩形板.     

圆柱型正交各向异性圆形薄板的非线性非对称弯曲问题(Ⅰ)

本文利用“两变量法”[1]研究了圆柱型正交各向异性圆形薄板在非均布横向载荷作用下的非线性非对称弯曲问题,并得到在周边为可移夹支条件下的本问题的一致有效渐近解。     

在任意不定常温度场和任意法向动载荷联合作用下中心开孔圆底扁球壳的动力问题

本文得出了在任意不定常温度场和任意法向动载荷联合作用下中心开孔圆底扁球壳的动力问题的解析解.我们假设温度沿壳体厚度直线分布.在第一部分.我们研究了常用边界条件下的中心开孔圆底扁球壳的自由振动.作为例子,我们计算了一边缘夹紧的扁球壳的自然基频(m=0),所得结果与E.Reissner[1]的结果作了比较.频率方程的解法是钱伟长[2]提出来的.这将在附录3中介绍.在第二部分,我们研究了在任意谐温度场和任意谐法向动载荷联合作用下的中心开孔圆底扁球壳的强迫振动.在第三部分,我们研究了在任意不定常温度场和任意法向动载荷联合作用下的具有初始条件的上述壳体的强迫振动.在附录1和2中,我们讨论了如何用应力函数来表示位移边界条件和m=1情形的边界条件.     

用双向三角级数法解悬臂矩形薄板在均布荷载下的弯曲

悬臂矩形板的弯曲问题是平板理论中的一个难题.多年来,对于这种板只有能量法与数值解法的近似解.1979年以来清华大学张福范教授等用迭加法陆续得出悬臂矩形板在均布荷载和一些集中荷载作用下的解析解.对于在均布荷载作用下的悬臂矩形薄板,本文用双向三角级数法获得了其挠度函数的解析解,并将所得结果与迭加法所得的结果进行了比较.通过比较表明,两种方法计算的结果符合得十分好,因而相互印证了它们的正确性.     

Analytical solutions of refined plate theory for bending,buckling and vibration analyses of thick plates

Analytical solutions for bending, buckling, and vibration analyses of thick rectangular plates with various boundary conditions are presented using two variable refined plate theory. The theory accounts for parabolic variation of transverse shear stress through the thickness of the plate without using shear correction factor. In addition, it contains only two unknowns and has strong similarities with the classical plate theory in many aspects such as equations of motion, boundary conditions, and stress resultant expressions. Equations of motion are derived from Hamilton’s principle. Closed-form solutions of deflection, buckling load, and natural frequency are obtained for rectangular plates with two opposite edges simply supported and the other two edges having arbitrary boundary conditions. Comparison studies are presented to verify the validity of present solutions. It is found that the deflection, stress, buckling load, and natural frequency obtained by the present theory match well with those obtained by the first-order and third-order shear deformation theories.     

集中载荷作用各边上任一点被支承的矩形板弯曲

应用功的互等定理求解在集中载荷作用下各边上任一点被支承的矩形板弯曲,给出了其精确解及算例.     

A two-variable first-order shear deformation theory considering in-plane rotation for bending,buckling and free vibration analyses of isotropic plates

This paper presents a two-variable first-order shear deformation theory considering in-plane rotation for bending, buckling and free vibration analyses of isotropic plates. In recent studies, a simple first-order shear deformation theory (S-FSDT) was developed and extended. It has only two variables by separating the deflection into bending and shear parts while the conventional first-order shear deformation theory (FSDT) has three variables. However, the S-FSDT provides incorrect predictions for the transverse shear forces on the insides and the twisting moments at the boundaries except simply supported plates since it does not consider in-plane rotation. The present theory also has two variables but considers in-plane rotation such that it is able to correctly predict the responses of plates with any boundary conditions. Analytical solutions are obtained for rectangular plates with two opposite edges that are simply supported, with the other edges having arbitrary boundary conditions. Numerical results of deflections, stress resultants, buckling loads and natural frequencies are presented with the FSDT, the S-FSDT and the present theory. Comparative studies demonstrate the effects of in-plane rotation and the accuracy of the present theory in predicting the bending, buckling and free vibration responses of isotropic plates.     

对称迭层矩形板的平面应力分析

常用的对称迭层板为各向异性板．根据平面应力问题的基本方程精确地用应力函数解法求得了各向异性板的一般解析解．推导出平面内应力和位移的一般公式,其中积分常数由边界条件来决定．一般解包括三角函数和双曲函数组成的解,它能满足4个边为任意边界条件的问题．还有代数多项式解,它能满足4个角的边界条件．因此一般解可用以求解任意边界条件下的平面应力问题．以4边承受均匀法向和切向载荷以及非均匀法向载荷的对称迭层方板为例,进行了计算和分析．     

Reissner厚板弹性弯曲的一般解析解

针对大型工程建设中的Reisner厚板弹性弯曲问题,本文采用复级数方法求解相应的常系数偏微分方程组的边值问题,并首次得到了任意边界条件下的一般解析解.该解形式简单,计算方便、可靠.以四边简支和三边固支一边自由两种支撑条件下厚板承受均布载荷为例进行了分析验算,与已有的计算结果相比,计算结果相当满意.同时本文还着重对解的收敛速度、正确性(合理性)及边界满足情况进行了考察.     

Levy-type solution for free vibration analysis of orthotropic plates based on two variable refined plate theory

Closed-form solutions for free vibration analysis of orthotropic plates are obtained in this paper based on two variable refined plate theory. The theory, which has strong similarity with classical plate theory in many aspects, accounts for a quadratic variation of the transverse shear strains across the thickness, and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. Equations of motion are derived from the Hamilton’s principle. The closed-form solutions of rectangular plates with two opposite edges simply supported and the other two edges having arbitrary boundary conditions are obtained by applying the state space approach to the Levy-type solution. Comparison studies are performed to verify the validity of the present results. The effects of boundary condition, and variations of modulus ratio, aspect ratio, and thickness ratio on the natural frequency of orthotropic plates are investigated and discussed in detail.     

Elasticity solutions for functionally graded rectangular plates with two opposite edges simply supported

England (2006) [13] proposed a novel method to study the bending of isotropic functionally graded plates subject to transverse biharmonic loads. His method is extended here to functionally graded plates with materials characterizing transverse isotropy. Using the complex variable method, the governing equations of three plate displacements appearing in the expansions of displacement field are formulated based on the three-dimensional theory of elasticity for a transverse load satisfying the biharmonic equation. The solution may be expressed in terms of four analytic functions of the complex variable, in which the unknown constants can be determined from the boundary conditions similar to that in the classical plate theory. The elasticity solutions of an FGM rectangular plate with opposite edges simply supported under 12 types of biharmonic polynomial loads are derived as appropriate sums of the general and particular solutions of the governing equations. A comparison of the present results for a uniform load with existing solutions is made and good agreement is observed. The influence of boundary conditions, material inhomogeneity, and thickness to length ratio on the plate deflection and stresses for the load x²yq are studied numerically.     

在集中荷载作用下悬臂矩形板的弯曲

本文引用广义简支边的概念并应用叠加法,解决了有一集中力作用在板的垂直于固定边的中线任一点上的悬臂板弯曲问题.     

Bending of rectangular orthotropic thin plates with rotationally restrained edges: A finite integral transform solution

The present study deals with the bending of rectangular orthotropic thin plates with rotationally restrained edges under arbitrary transverse loads. The finite integral transform method is herein applied to obtain exact analytical solution. Unlike the conventional superposition method, the proposed method is simple and straightforward with more accurate results. In order to reflect the relative stiffness of the plate and the rotational elastic restraints, a new rotational fixity factor is introduced to define elastic restraints against rotation along edges and a general boundary condition will be presented. Simply supported or clamped edges turn out to be particular, limiting situations. The effect of rotational restraints, load distributions and aspect ratios on plate bending is investigated by comprehensive numerical results. The accuracy and convergence of the present formulation are assessed by comparing with previously reported results. Excellent agreements are reached and some new results are provided for further comparison by other methods.