非加劲钢板剪力墙的高阶弹性剪切屈曲分析

非加劲钢板剪力墙(SPSW)结构在水平荷载作用下易屈曲,形成主拉压应力场,并以拉力带方式提供水平承载力及抗侧刚度。传统拉杆模型(SM模型)用于非加劲SPSW结构分析或设计时忽略压力场的贡献,一般会低估高厚比较小的非加劲SPSW结构的抗侧能力。非加劲SPSW结构在水平力作用下会形成多波面外变形,与剪力墙板的高阶屈曲相似,可通过在修正的SM模型中引入对应于高阶屈曲的主压应力来反映压力场贡献,提高模型分析精度。考虑剪力墙板高厚比、高宽比及边缘构件刚度的影响,共设计66个单层、单跨和梁柱铰接的非加劲SPSW算例,并进行弹性屈曲分析。分析结果表明,高厚比及边缘构件刚度对非加劲SPSW结构的剪切屈曲系数影响不大;随着剪力墙板高宽比的增加,非加劲SPSW结构的剪切屈曲系数呈增大趋势。采用Matlab程序对66个非加劲SPSW算例的2～5阶剪切屈曲系数结果进行统计分析,并提出了简化公式。     

各向异性矩形板的剪切屈曲分析

根据各向异性矩形薄板剪切屈曲横向位移函数的微分方程建立了一般性的解析解。该一般解包括三角函数和双曲线函数组成的解,它能满足四个边为任意边界条件的问题;该一般解还包括代数多项式解,它能满足四个角的边界条件问题。因此,这一解析解可用于精确地求解任意边界的各向异性矩形板的剪切屈曲问题。其中待定常数可由四边和四角的边界条件来确定,由此得出的齐次线性代数方程系数矩阵行列式等于零可以求得各阶临界载荷及其屈型。结合配点法,利用变形的对称和反对称性,以及对称迭层正方形板均可使计算更简单。以四边平夹的对称角铺设复合材料迭层板为例进行了计算和讨论。     

Elastic buckling of honeycomb structure under out-of-plane pressure

A theoretical model and an analytical method, which are suitable for initial elastic buckling analysis of two-dimensional honeycomb structures including hexagonal honeycombs with walls of equal or unequal thickness, rectangular and triangular honeycombs etc., are developed in this paper. The results given in present paper agree well with the experimental data of hexagonal honeycombs with walls of unequal thickness.The project was supported by National Natural Science Foundation of China.     

The buckling of elastic spherical caps

The John equations are used to model the buckling of a simply-supported elastic spherical cap that is subjected to a constant uniform external load . The Liapunov-Schmidt method is used to solve these equations. We show that solutions possessing circular, pear-shaped, elliptical, triangular, square-shaped, pentagonal and a variety of other symmetries branch from the unbuckled state of the shell. The stability of these solutions is discussed. Some numerics that complement the analytical results are also included.     

Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory

In this research, thermal buckling of circular plates compose of functionally graded material (FGM) is considered. Equilibrium and stability equations of a FGM circular plate under thermal loads are derived, based on the higher order shear deformation plate theory (3rd order plate theory). Assuming that the material properties vary as a power form of the thickness coordinate variable z and using the variational method, the system of fundamental partial differential equations is established. A buckling analysis of a functionally graded circular plate (FGCP) under various types of thermal loads is carried out and the result are given in closed-form solutions. The results are compared with the critical buckling temperature obtained for FGCP based on first order (1st order plate theory) and classical plate theory (0 order plate theory) given in the literature. The study concludes that higher order shear deformation theory accurately predicts the behavior of FGCP, whereas the first order and classical plate theory overestimates buckling temperature.     

Studies on the torsional buckling of elastic cylindrical shells

The experimental phenomenon and theoretical analysis are given for the torsional buckling of elastic cylindrical shells. From the experiment, it is found that the postbuckling deformation doesn't occupy the whole length when the shell is longer. In the theoretical calculation, only the normal displacement boundary condition is taken into account. By comparing the present calculation results with the accurate result of Yamakis theory and the results of the present experiment, it is shown that the influence of the axial and circumference boundary condition is less important.     

Torsional buckling of spherical shells under circumferential shear loads

ＩｎｔｒｏｄｕｃｔｉｏｎＩｍｐｏｒｔａｎｔａｐｌｉｃａｔｉｏｎｓｏｆｔｈｅｓｔａｂｉｌｉｔｙａｎａｌｙｓｉｓｏｆｓｈｅｌｓｃａｎｂｅｆｏｕｎｄｉｎｔｈｅｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｒａｎｇｉｎｇｏｖｅｒｔｈｅａｅｒｏｓｐａｃｅ,ｍａｒｉｎｅ,ａｒ...     

On the simple tension of a nonhomogeneous anisotropic elastic plate with cracks

Summary A two-dimensional solution expressed in finite terms is given to the problem of the extension of two anisotropic semi-infinite plates, which have different elastic properties and are bonded to each other along a finite number of straight-line segments on their boundaries. The method of solution is based on the reduction to a type of dual nonhomogeneousHilbert problems for two functions.To explain the effect of anisotropy on the stresses near the common edge, numerical computations are carried out for the case where two semi-infinite plates bonded along a single segment are subjected to some special loading conditions. Stress distributions on this common edge and isochromatic lines in its neighborhood are shown in several figures.

---

Übersicht Es wird eine zweidimensionale geschlossene Lösung für die Zugbeanspruchung zweier anisotroper Halbscheiben gegeben, die längs eines Stücks ihrer geraden Berandung miteinander verbunden sind. Die Lösung wird auf ein duales inhomogenesHilbertsches Problem für zwei unbekannte Funktionen zurückgeführt. Um den Einfluß der Anisotropie auf den Verlauf der Spannungen in der Nähe der miteinander verbundenen Randteile zu erkennen, werden numerische Berechnungen für verschiedene Belastungsfälle durchgeführt. Der Verlauf dieser Spannungen ist in einigen Diagrammen dargestellt.

     

A simple criterion for finite time stability with application to impacted buckling of elastic columns

The existing theories of finite-time stability depend on a prescribed bound on initial disturbances and a prescribed threshold for allowable responses. It remains a challenge to identify the critical value of loading parameter for finite time instability observed in experiments without the need of specifying any prescribed threshold for allowable responses. Based on an energy balance analysis of a simple dynamic system, this paper proposes a general criterion for finite time stability which indicates that finite time stability of a linear dynamic system with constant coefficients during a given time interval [0, t _f ] is guaranteed provided the product of its maximum growth rate (determined by the maximum eigen-root p₁ >0) and the duration t _f does not exceed 2, i.e., p₁t _f <2. The proposed criterion (p₁t _f =2) is applied to several problems of impacted buckling of elastic columns: (i) an elastic column impacted by a striking mass, (ii) longitudinal impact of an elastic column on a rigid wall, and (iii) an elastic column compressed at a constant speed (“Hoff problem”), in which the time-varying axial force is replaced approximately by its average value over the time duration. Comparison of critical parameters predicted by the proposed criterion with available experimental and simulation data shows that the proposed criterion is in robust reasonable agreement with the known data, which suggests that the proposed simple criterion (p₁t _f =2) can be used to estimate critical parameters for finite time stability of dynamic systems governed by linear equations with constant coefficients.     

Subharmonic and ultra-subharmonic response of nonlinear elastic beams subjected to harmonic excitation

Ｔｈｅｄｙｎａｍｉｃｒｅｓｐｏｎｓｅｐｒｏｂｌｅｍｓｏｆｅｌａｓｔｉｃｓｔｒｕｃｔｕｒｅｈｏｌｄｍｏｒｅａｎｄｍｏｒｅｉｎｔｅｒｅｓｔ．Ｉｎｔｈｅｅａｒｌｙ１９７０’ｓ．Ｗ．Ｙ．Ｔｓｅｎｇｅｔａｌ．［１,２］ｉｎｖｅｓｔｉｇａｔｅｄｆｉｘｅｄ＿ｅｎｄｅｄｂｅａｍｓ．Ｆｉｒｓｔ,ｔｈｅｓｉｎｇｌｅｍｏｄｅａｎｄｔｗｏｍｏｄｅｓｗｅｒｅｕｓｅｄｔｏｔｒａｎｓｆｏｒｍｐａｒｔｉａｌｄｉｆｆｅｒｅｎｔｉａｌｃｏｎｔｒｏｌｌｉｎｇｅｑｕａｔｉｏｎｓｉｎｔｏｏｒｄｉｎａｌｄｉｆｆｅｒｅｎｔｉａｌｄｙｎａｍｉ…     

Nonlinear vibration and buckling of circular sandwich plate under complex load

The nonlinear vibration fundamental equation of circular sandwich plate under uniformed load and circumjacent load and the loosely clamped boundary condi- tion were established by von Karman plate theory,and then accordingly exact solution of static load and its numerical results were given.Based on time mode hypothesis and the variational method,the control equation of the space mode was derived,and then the amplitude frequency-load character relation of circular sandwich plate was obtained by the modified iteration method.Consequently the rule of the effect of the two kinds of load on the vibration character of the circular sandwich plate was investigated.When circumjacent load makes the lowest natural frequency zero,critical load is obtained.     

A catastrophe model for the impact torsional buckling of elastic cylindrical shell

The catastrophe theory is used to study the impact buckling of elastic structures. A criterion for impact buckling is established based on the proposed catastrophe system, in whose bifurcation set the critical step load is located. By the present theory, the impact torsional buckling for a clamped cylindrical shell is studied and the critical step torques for different imperfections are given. Also, the static critical torque is given, and it is shown that the critical step torque is smaller than the critical static torque.The project is supported by National Natural Science Foundation of China     

Photoelastic analysis of a thick plate with an elliptical hole subjected to simple out-of-plane bending

A three-dimensional photoelastic analysis using the stress freezing and slicing techniques was employed to study the stress distribution and the stress-concentration factors around an elliptical hole in a plate of finite thickness. The plate was subjected to simple out-of-plane bending. A special bending device was designed to produce uniform bending moment at the two opposite free edges of the plate. Six plates with various elliptical holes were studied. The stress variation across the plate thickness at the periphery of the elliptical hole was also investigated. The experimental results were correlated with the existing theoretical solutions.     

Calculation of stresses in a multiply-connected anisotropic plate using stress functions of multiple complex variables

On the basis of anisotropic mathematical elasticity, using multiple conformal representations, the stress functions of multiple complex variables for an infinite multiply-connected anisotropic plate are derived. The functions are developed in Fourier series on unit circles, and the unknown coefficients of the functions are determined by undetermined coefficients method. Then the stresses in the plate can be calculated. A plate containing multiple elliptical holes or cracks is discussed, and the corresponding FORTRAN77 program is developed. Five examples are given. The results show that this method is very effective and convenient. The project supported by Aeronautical Science Foundation of China     

First fundamental problems of anisotropic elastic plane weakened by periodic collinear cracks

Using the method of complex functions, we discuss the first fundamental problems of an anisotropic infinite elastic plane weakened by periodic collinear cracks and with periodic boundary loads on both sides of the cracks. This problem was considered by Cai [Engineering Fracture Mechanics 46（1）, 133-142 （1993）]. However, the previous method is imperfect. Therefore, the results are incorrect. Here, we revise the method and give a correct solution.     

Navier solution for the elastic equilibrium problems of anisotropic skew thin plate wite variable thickness in nonlinear theories

This paper discusses the elastic equilibrium problems of anisotropic skew thin plate ofvariable thickness simply supported on all four sides in nonlinear theories,and uses theNavier method to seek an approach to the problem,and to illustrate the solution with theexamples.In conclusion,the mention is made of the scope of application and theconvergency of the solution.     

Stability of plates made of a particulate composite with nonlinear elastic matrix and damaged inclusions

The bifurcation instability problem for rectangular plates made of particulate composites with nonlinear elastic matrix and damaged inclusions is formulated and solved __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 7, pp. 79–89, July 2007.     

正交各向异性加筋板屈曲分析方法研究

为简化正交各向异性加筋板屈曲分析,本文将筋条位移场用其所在位置的板的位移表达,建立加筋板总势能,通过离散位移场,利用最小势能原理,推导出基于里兹法的正交各向异性加筋板屈曲分析控制方程,采用Matlab进行求解.基于本文推导的方程对单筋和三筋加筋板在不同压剪比下的屈曲荷载和模态进行分析,得到与Abaqus基本一致的结果....     

INVESTIGATION OF THE DYNAMIC BUCKLING OF DOUBLEWALLED CARBON NANOTUBE SUBJECTED TO AXIAL PERIODIC DISTURBING FORCES

IntroductionThediscoveryofthefirstcarbonnanotubes[1]hasattractedwideattentionandstimulatedextensivestudies[2 - 5 ].Thestudiesshowedthatthecarbonnanotubesexhibitsuperiormechanical,electronicandchemicalproperties.Onthemechanicalbehavior,thecarbonnanotubespossessexceptionallyhighstrength ,stiffnessandelasticmodulus.Theestimatemodulusofthecarbonnanotubemayreachashighas 1TPa.Itisthelargestofallknownmaterials.Thestrengthorstiffnessishigherthananyknownfiber[3].Thecarbonnanotubeareusedascompositemat…     

Analysis and optimization against buckling of beams interacting with elastic foundation

We consider an infinite continuous elastic beam that interacts with linearly elastic foundation and is under compression. The problem of the beam buckling is formulated and analyzed. Then the optimization of beam against buckling is investigated. As a design variable (control function) we take the parameters of cross-section distribution of the beam from the set of periodic functions and transform the original problem of optimization of infinite beam to the corresponding problem defined at the finite interval. All investigations are on the whole founded on the analytical variational approaches and the optimal solutions are studied as a function of problems parameters.