Study on the reactivity of the alkyne component in ruthenium-catalyzed [2 + 2] cycloadditions between an alkene and an alkyne

The ruthenium-catalyzed [2 + 2] cycloadditions of norbornadiene with a variety of alkynes have been investigated. Electronic effect of the alkyne component has shown to play an important role on the rate of the cycloaddition, and the reactivity of the alkyne component increases dramatically as the alkyne becomes more electron deficient. Increase in the steric bulk of the alkyne component decreases the reactivity of the alkyne component. It was also found that chelation effect of propargylic alcohols greatly enhanced the reactivity of the alkyne component in the ruthenium-catalyzed [2 + 2] cycloadditions.     

Intramolecular [2 + 2]cycloadditions of dialkylketenes with alkenes. Regiochemistry of intramolecular [2+2]cycloadditions of ketenes with alkenes

Unsaturated dialkylketenes 7a, 7b and 7c undergo intramolecular [2 + 2]cycloadditions to give 8a (45%), 9b (23%) and 9c (45%). Intramolecular cycloadditions of dialkylketenes give higher yields than intramolecular cycloadditions of monoalkylketenes, even though dialkylketenes are less reactive than monoalkylketenes. An intramolecular competition experiment with ketene 17 establishes that trans-alkenes are approximately 33 times more reactive than cis-alkenes in intramolecular cycloadditions. Ketene 36 furnishes 22% of the expected bicyclo[3.2.0]heptanone 37 and 28% of bicyclo[3.1.1]heptanone 38.     

Ruthenium-catalyzed [2+2] cycloadditions of bicyclic alkenes and ynamides

Ruthenium-catalyzed [2+2] cycloadditions between bicyclic alkenes and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). Diastereoselective cycloaddition utilizing chiral cyclic ynamides were also examined and a low to moderate level of asymmetric induction was observed.     

Syntheses of seven-membered rings: ruthenium-catalyzed intramolecular [5+2] cycloadditions

The Ru-catalyzed intramolecular [5+2] cycloaddition of cyclopropylenynes is investigated with respect to the regio- and diastereoselectivity as well as the functional group compatibility of the reaction. Evidence for the mechanism as occurring through a ruthenacyclopentene intermediate is elucidated from 1) the study of the diastereoselectivity of the cycloaddition; 2) the effect of variation of substituents on the regioselectivity of cyclopropyl bond cleavage in 1,2-trans- and 1,2-cis-disubstituted cyclopropanes and 3) examples that clearly do not involve ruthenacyclohexene as intermediates as products still incorporate the cyclopropyl moiety. The scope and limitations of the Ru-catalyzed cycloaddition are discussed and compared with the Rh-catalyzed reaction. The potential power of this methodology towards natural product total synthesis is demonstrated by the formation of several polycyclic systems with the chosen reaction conditions and readily available cyclopropylenyne substrates.     

Ruthenium-catalyzed [2 + 2] cycloadditions between bicyclic alkenes and alkynyl halides

Ru-catalyzed [2 + 2] cycloadditions between norbornadiene and alkynyl halides were found to occur in moderate to good yields (32-89%). The presence of the halide moiety greatly enhances the reactivity of the alkyne component in the cycloaddition and can be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition. [reaction: see text]     

Remote substituent effects in ruthenium-catalyzed [2+2] cycloadditions: an experimental and theoretical study

The effects of a remote substituent on the regioselectivity of ruthenium-catalyzed [2+2] cycloadditions of 2-substituted norbornenes with alkynes have been investigated experimentally and theoretically using density functional theory. Most of the cycloadditions occurred smoothly at room temperature, giving the exo cycloadducts in excellent yields. Regioselectivities of 1.2:1 to 15:1 were observed with various substituents on the C-2 position of the norbornenes. Exo-C-2-substituents usually showed greater remote substituent effects on the regioselectivities of the cycloadditions than the corresponding endo-C-2-substituents. The regioselectivity of the cycloadditions with C-2 substituents containing an exocyclic double bond (sp2 hybridized carbon at C-2) are much higher than the cycloadditions with the exo and endo 2-substituted norbornenes. Theoretical studies predicted the same trends as experiment and matched the experimental product ratios well. The nature of the regioselectivity in this reaction is discussed. Different strengths of the pi(C5-C6)-->pi(C2-Y) or pi(C5-C6)-->sigma(C2-Y) orbital interactions in 2-substituted norbornenes result in different degrees of C5-C6 double bond polarization. Stronger C5-C6 polarization will increase the difference in the activation energies between the major and minor pathways and thus lead to greater regioselectivities.     

Recent advances in "formal" ruthenium-catalyzed [2+2+2] cycloaddition reactions of diynes to alkenes

"Formal" and standard RuII-catalyzed [2+2+2] cycloaddition of 1,6-diynes to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. When terminal 1,6-diynes 1 were used, two isomeric bicyclic 1,3-cyclohexadienes 4 or 6 were obtained, depending on the acyclic or cyclic nature of the alkene partner. When unsymmetrical substituted 1,6-diynes 7 were used, the reaction with acyclic alkenes took place regio- and stereoselectively to afford bicyclic 1,3-cyclohexadienes 8. A cascade process that behaves as a "formal" RuII-catalyzed [2+2+2] cycloaddition explained these results. Initially, a Ru-catalyzed linear coupling of 1,6-diynes 1 and 7 with acyclic alkenes occurs to give open 1,3,5-trienes of type 3, which after a thermal disrotatory 6e(-) pi-electrocyclization led to the final 1,3-cyclohexadienes 4 and 8. When disubstituted 1,6-diyne 10 was used with electron-deficient alkenes, new exo-methylene cyclohexadienes 12 arose from a competitive reaction pathway.     

Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

Ruthenium-catalyzed [2 + 2] cycloadditions of ynamides

Ruthenium-catalyzed [2 + 2] cycloadditions between norbornene and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions, giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). [reaction: see text]     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Rhodium catalysed [2+2+2] cycloadditions of acetylenes

Wilkinson's catalyst RhCl(PPh₃)₃ is an effective catalyst (0.5 – 2 mole %) for the rapid intermolecular trimerisation of 1,6-heptadiynes with monoacetylenes under mild conditions.     

Formal and standard ruthenium-catalyzed [2 + 2 + 2] cycloaddition reaction of 1,6-diynes to alkenes: a mechanistic density functional study

"Formal" and standard Ru(II)-catalyzed [2 + 2 + 2] cycloaddition of 1,6-diynes 1 to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. The neutral Ru(II) catalyst was formed in situ by mixing equimolecular amounts of [Cp*Ru(CH3CN)3]PF6 and Et4NCl. Two isomeric bicyclic 1,3-cyclohexadienes 3 and 8 were obtained depending on the cyclic or acyclic nature of the alkene partner. Mechanistic studies on the Ru catalytic cycle revealed a clue for this difference: (a) when acyclic alkenes were used, linear coupling of 1,6-diynes with alkenes was observed giving 1,3,5-trienes 6 as the only initial reaction products, which after a thermal disrotatory 6e-pi electrocyclization led to the final 1,3-cyclohexadienes 3 as probed by NMR studies. This cascade process behaved as a formal Ru-catalyzed [2 + 2 + 2] cycloaddition. (b) With cyclic alkenes, the standard Ru-catalyzed [2 + 2 + 2] cycloaddition occurred, giving the bicyclic 1,3-cyclohexadienes 8 as reaction products. A complete catalytic cycle for the formal and standard Ru-catalyzed [2 + 2 + 2] cycloaddition of acetylene and cyclic and acyclic alkenes with the Cp*RuCl fragment has been proposed and discussed based on DFT/B3LYP calculations. The most likely mechanism for these processes would involve the formation of ruthenacycloheptadiene intermediates XXIII or XXVII depending on the alkene nature. From these complexes, two alternatives could be envisioned: (a) a reductive elimination in the case of cyclic alkenes 7 and (b) a beta-elimination followed by reductive elimination to give 1,3,5-hexatrienes 6 in the case of acyclic alkenes. Final 6e-pi electrocyclization of 6 gave 1,3-cyclohexadienes 3.     

Rhodium(I)-catalyzed [2+2+1] cycloadditions of 1,3-dienes, alkenes, and CO

Initial examples of a Rh(I)-catalyzed [2+2+1] reaction of diene-enes and CO are described. This method allows for the facile, efficient, and diastereoselective construction of a variety of alkenyl cyclopentanones in good to excellent yields. Control studies show that the diene moiety is required for this process as bis-enes do not give the [2+2+1] products under the same conditions.     

Silver-catalyzed [2 + 2] cycloadditions of siloxy alkynes

We have described the first [2 + 2] cycloadditions of siloxy alkynes with a range of unsaturated carbonyl compounds. The reactions are efficiently promoted by substoichiometric amount of silver trifluoromethanesulfonimide and display excellent regio- and diastereoselectivity combined with a broad substrate scope. Our studies have established unambiguously the stepwise mechanism of this process and provided evidence for a novel role of silver in the catalytic cycle of the reaction, which involves silver-based complexation and activation of siloxy alkyne toward the subsequent 1,4-addition.     

Frontier-orbital analyses of ketene [2+2] cycloadditions

Twelve kinds of ketene [2+2] cycloadditions have been investigated by ab initio calculations. They are composed of four ketenes (Y–HC=C=O, Y=H, NH₂, Cl, and CN) and three isoelectronic ketenophiles (ethylene, methylenimine, and formaldehyde). All the transition state geometries obtained here are not different significantly, but the extent of formation of two covalent bonds differs appreciably. The difference is attributable to the degree of the charge transfer interactions. One is the interaction from the π orbital and/or the lone pair orbital of a ketenophile to the LUMO of a ketene (dominant charge transfer, CT1). The other is that from the HOMO of the ketene to the π* orbital of the ketenophile (second dominant charge transfer, ct1). CT1 contributes to the formation of only one covalent bond, and ct1 does to the formation of the other. This independent function is characteristic of ketene [2+2] cycloadditions. They are not concerned with the orbital phase. We also have examined Fukui's postulate that the deformation of particular frontier orbitals causes the reaction progress. The role has been verified both by configuration analyses along the intrinsic reaction coordinate of the ketene-ethylene reaction and by the examination of distortions of frontier-orbital shapes along the low-frequency vibrational modes. Received: 25 June 1998 / Accepted: 28 August 1998 / Published online: 11 November 1998     

NHC-catalyzed enantioselective [2 + 2] and [2 + 2 + 2] cycloadditions of ketenes with isothiocyanates

The enantioselective N-heterocyclic carbene-catalyzed formal [2 + 2] and [2 + 2 + 2] cycloaddition of ketenes and isothiocyanates were developed. Reaction with N-aryl isothiocyanates at room temperature favors the [2 + 2] cycloaddition, while reaction with N-benzoyl isothiocyanates at -40 °C favors the [2 + 2 + 2] cycloaddition.     

Synthesis of macrocycles via cobalt-mediated [2 + 2 + 2] cycloadditions

We investigated the formation of macrocycles from alpha,omega-diynes in cobalt-mediated co-cyclotrimerization reactions. Long-chain alpha,omega-diynes underwent metal-mediated [2 + 2 + 2] cycloadditions with nitriles, cyanamides, or isocyanates in the presence of CpCo(CO)2 (Cp = cyclopentadienide) to yield pyridine-containing macrocycles, i.e., meta- and para-pyridinophanes, such as 5m/5p, 35m/35p, and 41m/41p. The regioselectivity of these reactions was affected by the length and type of linker unit between the alkyne groups, as well as by certain stereoelectronic factors. An analogous alpha,omega-cyano-alkyne, 28, combined with an alkyne to yield two isomeric meta-pyridinophanes, such as 5m and 29m, and an ortho cycloadduct (benzannulation product), such as 29o. We developed a reaction protocol for these cobalt-based [2 + 2 + 2] cycloadditions that involves markedly improved conditions such that this process offers a convenient, flexible synthetic approach to macrocyclic pyridine-containing compounds. For example, diyne 6 reacted with p-tolunitrile in 1,4-dioxane to give 7p and 7m (7:1 ratio) in 87% yield at a moderate temperature of ca. 100 degrees C in 24 h without photoirradiation or syringe-pump addition. Isocyanates were also effective reactants, as exemplified by the formation of 44p almost exclusively (44p:44m > 50:1) in 64% yield from diyne 8 and 2-phenylethylisocyanate. By using this improved protocol we were able to co-cyclotrimerize long-chain alpha,omega-diynes with alkynes in certain cases to demonstrate a successful macrocyclic variant of the Vollhardt reaction. For instance, diyne 6 reacted with dipropylacetylene to give paracyclophane 57p and benzannulene 57o (2:1 ratio) in 29% yield.