Preparation of delta-Chloro-alpha-allenyl Ketones by Acylation of 3-Buten-1-ynes

AlCl(3)-mediated acylation of 3-buten-1-yne derivatives with acyl chlorides yields a mixture of 5-chloro-2,3-pentadienones and 3-chloro-2,4-pentadienones. The proportion of allenyl ketones vs conjugated dienic ketones depends on the substitution pattern of the starting enyne. Acylation of 5-acetoxy-3-buten-1-ynes leads to the corresponding allenyl ketones (6-acetoxy-5-chloro-2,3-pentadienones).     

An ab initio/RRKM study of product branching ratios in the photodissociation of buta-1,2- and -1,3-dienes and but-2-yne at 193 nm

Ab initio G2M(MP2)//B3LYP/6-311G** calculations have been performed to investigate the reaction mechanism of photodissociation of buta-1,2- and -1,3-dienes and but-2-yne after their internal conversion into the vibrationally hot ground electronic state. The detailed study of the potential-energy surface was followed by microcanonical RRKM calculations of energy-dependent rate constants for individual reaction steps (at 193 nm photoexcitation and under collision-free conditions) and by solution of kinetic equations aimed at predicting the product branching ratios. For buta-1,2-diene, the major dissociation channels are found to be the single Cbond;C bond cleavage to form the methyl and propargyl radicals and loss of hydrogen atoms from various positions to produce the but-2-yn-1-yl (p1), buta-1,2-dien-4-yl (p2), and but-1-yn-3-yl (p3) isomers of C(4)H(5). The calculated branching ratio of the CH(3) + C(3)H(3)/C(4)H(5) + H products, 87.9:5.9, is in a good agreement with the recent experimental value of 96:4 (ref. 21) taking into account that a significant amount of the C(4)H(5) product undergoes secondary dissociation to C(4)H(4) + H. The isomerization of buta-1,2-diene to buta-1,3-diene or but-2-yne appears to be slower than its one-step decomposition and plays only a minor role. On the other hand, the buta-1,3-diene-->buta-1,2-diene, buta-1,3-diene-->but-2-yne, and buta-1,3-diene-->cyclobutene rearrangements are significant in the dissociation of buta-1,3-diene, which is shown to be a more complex process. The major reaction products are still CH(3) + C(3)H(3), formed after the isomerization of buta-1,3-diene to buta-1,2-diene, but the contribution of the other radical channels, C(4)H(5) + H and C(2)H(3) + C(2)H(3), as well as two molecular channels, C(2)H(2) + C(2)H(4) and C(4)H(4) + H(2), significantly increases. The overall calculated C(4)H(5) + H/CH(3) + C(3)H(3)/C(2)H(3) + C(2)H(3)/C(4)H(4) + H(2)/C(2)H(2) + C(2)H(4) branching ratio is 24.0:49.6:4.6:6.1:15.2, which agrees with the experimental value of 20:50:8:2:2022 within 5 % margins. For but-2-yne, the one-step decomposition pathways, which include mostly H atom loss to produce p1 and, to a minor extent, molecular hydrogen elimination to yield methylethynylcarbene, play an approximately even role with that of the channels that involve the isomerization of but-2-yne to buta-1,2- or -1,3-dienes. p1 + H are the most important reaction products, with a branching ratio of 56.6 %, followed by CH(3) + C(3)H(3) (23.8 %). The overall C(4)H(5) + H/CH(3) + C(3)H(3)/C(2)H(3) + C(2)H(3)/C(4)H(4) + H(2)/C(2)H(2) + C(2)H(4) branching ratio is predicted as 62.0:23.8:2.5:5.7:5.6. Contrary to buta-1,2- and -1,3-dienes, photodissociation of but-2-yne is expected to produce more hydrogen atoms than methyl radicals. The isomerization mechanisms between various isomers of the C(4)H(6) molecule including buta-1,2- and -1,3-dienes, but-2-yne, 1-methylcyclopropene, dimethylvinylidene, and cyclobutene have been also characterized in detail.     

Synthesis and structure of an acetylene derivative of lupeol

The synthesis and x-ray crystal structure of 3-acetoxy-29-norlup-20(30)-yne were carried out.     

Efficient synthesis of enynes by tetraphosphine-palladium-catalysed reaction of vinyl bromides with terminal alkynes

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as catalyst, a range of vinyl bromides undergoes Sonogashira cross-coupling reaction with a variety of alkynes, leading to the corresponding 1,3-enynes in good yields. The reaction tolerates several alkynes such as phenylacetylene, dec-1-yne, 2-methylbut-1-en-3-yne a range of alk-1-ynols, 3,3-diethoxyprop-1-yne and a propargyl amine. Higher reactions rates were observed in the presence of phenylacetylene, dec-1-yne, but-3-yn-1-ol, pent-4-yn-1-ol, 3,3-diethoxyprop-1-yne or 1,1-dipropyl-2-propynylamine than with propargyl alcohol, 3-methoxy-prop-1-yne or 2-methylbut-1-en-3-yne. This catalyst can be used at low loading even for reactions of sterically hindered vinyl bromides such as bromotriphenylethylene or 2-bromo-3-methyl-but-2-ene.     

Cyclotrimerization of alkynes catalyzed by the naphthalene ruthenium complex [CpRu(C10H8)]+

The naphthalene ruthenium complex [CpRu(C₁₀H₈)]⁺ (in the presence of Cl^? ions) catalyzes the cyclotrimerization of 2,2-dimethyl-5,5-dipropargyl-1,3-dioxane-4,6-dione with alkynes (acetylene, hex-1-yne, hex-3-yne, oct-1-yne, phenylacetylene, trimetylsilylacetylene, octa-1,7-diyne, pent-1-yn-5-ol, methyl propargyl ether, and propargyl acetate) giving tricyclic aromatic compounds in 55–85% yields.     

Reactions of C2H with 1- and 2-butynes: an ab initio/RRKM study of the reaction mechanism and product branching ratios

Ab initio CCSD(T)/cc-pVTZ(CBS)//B3LYP/6-311G** calculations of the C(6)H(7) potential energy surface are combined with RRKM calculations of reaction rate constants and product branching ratios to investigate the mechanism and product distribution in the C(2)H + 1-butyne/2-butyne reactions. 2-Ethynyl-1,3-butadiene (C(6)H(6)) + H and ethynylallene (C(5)H(4)) + CH(3) are predicted to be the major products of the C(2)H + 1-butyne reaction. The reaction is initiated by barrierless ethynyl additions to the acetylenic C atoms in 1-butyne and the product branching ratios depend on collision energy and the direction of the initial C(2)H attack. The 2-ethynyl-1,3-butadiene + H products are favored by the central C(2)H addition to 1-butyne, whereas ethynylallene + CH(3) are preferred for the terminal C(2)H addition. A relatively minor product favored at higher collision energies is diacetylene + C(2)H(5). Three other acyclic C(6)H(6) isomers, including 1,3-hexadiene-5-yne, 3,4-hexadiene-1-yne, and 1,3-hexadiyne, can be formed as less important products, but the production of the cyclic C(6)H(6) species, fulvene, and dimethylenecyclobut-1-ene (DMCB), is predicted to be negligible. The qualitative disagreement with the recently measured experimental product distribution of C(6)H(6) isomers is attributed to a possible role of the secondary 2-ethynyl-1,3-butadiene + H reaction, which may generate fulvene as a significant product. Also, the photoionization energy curve assigned to DMCB in experiment may originate from vibrationally excited 2-ethynyl-1,3-butadiene molecules. For the C(2)H + 2-butyne reaction, the calculations predict the C(5)H(4) isomer methyldiacetylene + CH(3) to be the dominant product, whereas very minor products include the C(6)H(6) isomers 1,1-ethynylmethylallene and 2-ethynyl-1,3-butadiene.     

Highly chemoselective nickel-catalyzed three-component cross-trimerization between two distinct terminal alkynes and an internal alkyne

The highly chemo-, regio-, and stereoselective three-component cross-trimerization reaction between triisopropylsilylacetylene, diarylacetylene, and a terminal alkyne was achieved by Ni(cod)(2)/P(p-CF(3)C(6)H(4))(3) catalyst at room temperature via selective C-H oxidative addition of the terminal silylacetylene. The reaction is applicable for various diarylacetylenes and terminal alkynes to yield the corresponding 1,3-diene-5-yne compounds.     

The synthesis of ventiloquinone L, the monomer of cardinalin 3

Readily available ethyl-4-acetoxy-6,8-dimethoxynaphthalene-2-carboxylate was converted into 1-[3-allyl-4-(benzyloxy)-6,8-dimethoxy-2-naphthyl)-1-ethanol in seven steps. Subjection of this compound to Wacker oxidation conditions provided 5-benzyloxy-7,9-dimethoxy-1,3-dimethyl-1H-benzo[g]isochromene in good yield. Hydrogenation of the isochromene afforded (+/-)-cis-7,9-dimethoxy-1,3-dimethyl-1H-benzo[g]isochroman-5-ol as the major product, which was readily converted into ventiloquinone L.     

Substituent Effects on Fe+-Mediated [4+2] Cycloadditions in the Gas Phase

The Fe⁺-mediated [4+2] cycloaddition of dienes with alkynes has been examined by four-sector ion-beam and ion cyclotron resonance mass spectrometry. Prospects and limitations of this reaction were evaluated by investigating several Me-substituted ligands. Me Substitution at C(2) and C(3) of the diene, i.e., 2-methylbuta-1,3-diene, 2,3-dimethylbuta-1,3-diene, hardly disturbs the cycloaddition. Similarly, variation of the alkyne by use of propyne and but-2-yne does not affect the [4+2] cycloaddition step, but allows for H/D exchange processes prior to cyclization. In contrast, Me substituents in the terminal positions of the diene moiety (e.g., penta-1,3-diene, liexa-2,4-diene) induce side reactions, namely double-bond migration followed by [3+2] and [5+2] cycloadditions, up to almost complete suppression of the [4+2] cycloaddition for 2,4-dimethylhexa-2,4-diene. Similarly, alkynes with larger alkyl substituents (pent-1-yne, 3,3-dimethylbut-1-yne) suppress the [4 + 2] cycloaddition route. Stereochemical effects have been observed for the (E)- and (Z)-penta-1,3-diene ligands as well as for (E,E)- and (E,Z)-hexa-2,4-diene. A mechanistic explanation for the different behavior of the stereoisomers in the cyclization reaction is developed. Further, the regiochemical aspects operative in the systems ethoxyacetylene/pentadiene/Fe⁺ and ethoxyacetylcne/isoprene/Fe⁺ indicate that substituents avoid proximity.     

Herstellung und Reaktionen von 2-Nitro-3-acetoxy-1-propen

Zusammenfassung Die Herstellung von 2-Nitro-3-acetoxy-1-propen (IV) wurde verbessert. Eine neue Reaktion wurde gefunden beim Studium der Umsetzung von sauren Nitroverbindungen mit 2-Nitro-3-acetoxy-1-propen oder einer Vorstufe, 1,3-Diacetoxy-2-nitro-propan (III). 1,1-Dinitroäthan reagierte in Gegenwart von Basen mit III oder IV und ergab 2,2,4,6,6-Pentanitro-heptan. Ein Mechanismus dieser Reaktion wird aufgestellt und ihre allgemeine Anwendbarkeit durch Herstellung von anderen Polynitroverbindungen veranschaulicht.

---

An improved procedure for the preparation of 2-nitro-3-acetoxy-1-propene was developed. A new reaction was discovered in studying the addition of acidic nitro compounds to 2-nitro-3-acetoxy-1-propene (IV) or its precursor 1,3-diacetoxy-2-propane (III). The addition of 1,1-dinitroethane to III or IV, in the presence of base gave 2,2,4,6,6-pentanitroheptane. A mechanism for this reaction was postulated and its generality shown by preparation of other polynitroalkanes.

---

---

Herrn Prof. Dr.H. Bretschneider in Freundschaft gewidmet.     

Isomeric product distributions from the self-reaction of propargyl radicals

We have investigated the isomeric C6H6 product distributions of the self-reaction of propargyl (C3H3) radicals at two nominal pressures of 25 and 50 bar over the temperature range 720-1350 K. Experiments were performed using propargyl iodide as the radical precursor in a high-pressure single-pulse shock tube with a residence time of 1.6-2.0 ms. The relative yields of the C6H6 products are strongly temperature dependent, and the main products are 1,5-hexadiyne (15HD), 1,2-hexadiene-5-yne (12HD5Y), 3,4-dimethylenecyclobutene (34DMCB), 2-ethynyl-1,3-butadiene (2E13BD), fulvene, and benzene, with the minor products being cis- and trans-1,3-hexadiene-5-yne (13HD5Y). 1,2,4,5-Hexatetraene (1245HT) was observed below 750 K but the concentrations were too low to be quantified. The experimentally determined entry branching ratios are: 44% 15HD, 38% 12HD5Y, and 18% 1245HT, which is efficiently converted to 34DMCB. Following the initial recombination step, various C6H6 isomers are formed by thermal rearrangement. The experimentally observed concentrations for the C6H6 species are in good agreement with earlier experiments on 15HD thermal rearrangement.     

A Convenient and Efficient Route to 1,4-Bis（heteroaryl）-buta-1,3-diene and 4-Heteroarylbut-1-en-3-yne from 1,4-Dichlorobut-2-yne

A convenient and practical route to functionalized conjugated 1,3-enynes and 1,3-dienes is described. 1,4-Bis（heteroaryl）- 1,3-diene and 1-heteroarylbut- 1-en-3-yne derivatives were prepared from 1,4-dichloro-2-butyne and corresponding N-heteroarenes such as imidazole, pyrrole, pyrazole and indole derivatives in the presence of bases in good to high yields.     

Hydrogen-mediated C-C bond formation: catalytic regio- and stereoselective reductive condensation of alpha-keto aldehydes and 1,3-enynes

Hydrogenation of 1,3-enynes in the presence of alpha-keto aldehydes using cationic Rh(I) catalysts enables regio- and stereoselective reductive coupling to the acetylenic terminus of the enyne to afford (E)-2-hydroxy-3,5-dien-1-one products. Reductive condensation of 1-phenyl but-3-en-1-yne 1a with phenyl glyoxal 2a performed under an atmosphere of D(2) provides the product of mono-deuteration, (E)-2-hydroxy-3-deuterio-3,5-dien-1-one deuterio-3a, in 85% yield. Competition experiments involving catalytic hydrogenation of phenyl glyoxal in the presence of equimolar quantities of 1,4-diphenylbutadiene and 1,4-diphenylbut-3-en-1-yne 10a, as well as 1,4-diphenylbut-3-en-1-yne 10a and 1,4-diphenylbutadiyne, are chemoselective for coupling to the more highly unsaturated partner, suggesting a preequilibrium involving precoordination and exchange of the pi-unsaturated pronucleophiles with the catalyst prior to C-C bond formation, as well as a preference for coordination of the most pi-acidic reacting partner, as explained by the Dewar-Chatt-Duncanson model for alkyne coordination.     

Facile route to 1-phosphoryl- and 1-sulfonyl-1,3-dienes via palladium-catalyzed elimination of allylic acetates

The palladium(II)-catalyzed chloroacetoxylation of 1,3-dienes is employed to prepare 1-chloro-4-acetoxy-2-alkenes which are then transformed into 1-phosphoryl- or 1-sulfonyl-4-acetoxy-2-alkenes respectively. Elimination of acetate is promoted by palladium(O)-catalysis or by sodium hydride, producing the useful 1-phosphory]- or 1-sulfonyl-1,3-dienes.     

Highly stereoselective facile synthesis of 2-acetoxy-1,3(E)-alkadienes via a Rh(I)-catalyzed isomerization of 2,3-allenyl carboxylates

A highly stereoselective Rh(I)-catalyzed 1,3-acetoxyl rearrangement of 1,2-allen-3-yl carboxylates leading to 2-acetoxy-1,3(E)-alkadienes has been developed. In addition to the high catalytic efficiency and the scope, the excellent E-selectivity of the double bond is remarkable.     

Lactone-directed intramolecular Diels-Alder cyclization: synthesis of trans-dihydroconfertifolin

Trienes 1 and 3 were obtained in five steps from ethyl 4-acetoxy-3-oxobutanoate and 6-iodo-3-methyl-1,3-hexadiene. Intramolecular Diels-Alder cyclization of 1 and 3 gave tricyclic lactones 2 and 4 as the major products, respectively. The key intermediate 4 was converted in two steps to trans-dihydroconfertifolin (5).     

One-pot multistep synthesis of 4-acetoxy-2-amino-3-arylbenzofurans from 1-aryl-2-nitroethylenes and cyclohexane-1,3-diones

[reaction: see text] A novel method for synthesizing 4-acetoxy-2-amino-3-arylbenzofurans (4) from 1-aryl-2-nitroethylenes (1) and cyclohexane-1,3-diones (2) is described. The method features one-pot operation of a solution of 1 and 2 in THF with catalytic Et3N (rt, 12 h) followed with Ac2O, Et3N, and DMAP (rt, 5 h), although the process consists of 13 elementary reactions.     

2-Aminothiophene derivatives in a novel synthesis of phthalimidines

New aminophthalides were synthesized from o-formylbenzoic acid and substituted 2-aminothiophenes. Two of these compounds underwent recyclization in boiling Ac₂O to give the previously unknown 3-acetoxy-2-(3-cyano-4,5-dimethylthiophen-2-yl)-1,3-dihydroisoindol-1-one and 3-acetoxy-2-(3-cyano-4,5-tetramethylenethiophen-2-yl)-1,3-dihydroisoindol-1-one. The possible reaction mechanism and factors preventing the recyclization, in particular, the formation of intramolecular hydrogen bonds in the starting phthalides, were discussed. Some reactions of the resulting compounds with C-nucleophiles in trifluoroacetic acid were investigated. Two derivatives containing 4-hydroxy-3,5-di-tert-butylphenyl substituents were studied by X-ray diffraction.     

Chemistry of fluorinated quinones I. The Diels-Alder reactions of fluoranil

The Diels-Alder reaction of fluoranil with cyclopentadiene, 1,3-butadiene, and 1-acetoxy-1,3-butadiene gave 1,4, 5, 8-bis(methylene)-4a, 8a, 9a, 10a-tetrafluoro-1, 4, 4a, 5, 8, 8a, 9a, 10a-octahydroanthraquinone (I), 2, 3, 4a, 8a-tetrafluoro-4a, 5, 8, 8a-tetrahydro-1,4-naphthoquinone (III), and 5-acetoxy-2, 3, 4a, 8a-tetrafluoro-4a, 5, 8, 8a-tetrahydro-1,4- naphthoquinone (VI), respectively. Hydrogenation of I gave the expected saturated diketone(II). Hydrogenation of III afforded, with elimination of the two tertiary fluorines, 2,3-difluoro-5, 6, 7, 8-tetrahydro-1, 4- dihydroxynaphthalene (IV). In hydrogenation of VI, acetic acid and two moles of hydrogen fluoride were eliminated to give 2,3-difluoro-1, 4-dihydroxynaphthalene(VII). Both dihydroxy compounds IV and VII yielded on oxidation with ferric chloride the corresponding quinones, 2, 3- difluoro-5, 6, 7, 8-tetrahydro-1, 4-naphthoquinone (V) and 2, 3-difluoro-1, 4-naphthoquinone (VIII), respectively. Equivalent amounts of compounds IV and V gave a red-brown semiquinone IX, and a mixture of VI and VIII gave a dark-violet semiquinone X.     

Cationic Rh(I) catalyst in fluorinated alcohol: mild intramolecular cycloaddition reactions of ester-tethered unsaturated compounds

In fluorinated alcohols, the cationic Rh(I) species, which is derived from [Rh(COD)Cl]2 and AgSbF6, efficiently catalyzed intramolecular [4+2] cycloaddition reactions of ester-tethered 1,3-diene-8-yne derivatives. The catalytic system was also effective in intramolecular [5+2] cycloaddition reactions of ester-tethered omega-alkynyl vinylcyclopropane compounds.