A regioselective route to 3-alkyl-1-aryl-1H-pyrazole-5-carboxylates: Synthetic studies and structural assignments

Ethyl 2,4-dioxooctanoate ( 1 ) was selectively protected as the 2-(methoxyimino) derivative 2 . When 2 was reacted with phenylhydrazine hydrochloride, ethyl 3-butyl-1-phenyl-1H-pyrazole-5-carboxylate ( 4 ) was favored over the corresponding 5-butyl-1-phenyl-1H-pyrazole-3-carboxylate product 5 by a ratio of at least 6:1, a complete reversal of the regioselectivity observed for 1 . The structures of 4 and 5 were assigned definitively by NOE difference experiments. Regiochemical and configurational assignments of the mono- and bis(methoxyimino) derivatives of 1 were also achieved by ID and 2D ¹H and ¹³C nmr methods.     

Synthetic and biological studies of pyrazolines and related heterocyclic compounds

This review provides a comprehensive survey relating to the synthesis and biological applications of pyrazolines and related heterocycles in the last five years (2007–2011). These compounds are usually prepared from the cyclization of chalcones with hydrazine and its derivatives under the alcoholic conditions. The major incentive behind the synthesis of these compounds was the immense biological activities associated to these heterocyclic derivatives. The aim of this review is to find out different methods for the synthesis of pyrazoline derivatives.     

Benzopyrones—V Mass spectra of some ethyl 4-oxochromen-2-carboxylates and related compounds

The mass spectra of 23 chromone derivatives are recorded and interpreted. Most of these are ethyl 4-oxochromen-2-carboxylate derivatives, which with two exceptions, show the molecular ion as the base peak. In the spectrum of the unsubstituted ester (XVIII), the other most important fragments are [M—C2H4], [M—OEt], [M—C2H4—CO], [M—CO2Et + 1] and the benzocyclopropenyl ion. 6-Hydroxy-2-methylchromone and several of its derivatives undergo a retro-Diels-Alder reaction (R.D.A.) and also lose the carbonyl group. Ethyl 6-amino-4-oxochroman-2-carboxylate (XXIII) shows an R.D.A. reaction as well as losing the CO2Et group. The mass spectrum of 4-oxochromen-2-carboxylic acid has been studied.     

Synthetic,spectral, structural and antimicrobial studies of some Schiff bases 3-d metal complexes

The complexes of tailor made ligands with life essential metal ions may be an emerging area to answer the problems of multi-drug resistance (MDR). The coordination complexes of VO(II), Co(II), Ni(II) and Cu(II) with the Schiff bases derived from 3-bromobenzaldehyde/3-chlorobenzaldehyde with 2-aminophenol have been synthesized and characterized by elemental analysis, molar conductance, electronic spectra, FT-IR, ESR, FAB mass, thermal and magnetic susceptibility measurements, FAB mass and thermal data show degradation of complexes. Both the ligands behave as bidentate coordinating through O and N donor. The complexes exhibit coordination number 4, 5 or 6. X-ray powder diffraction data shows that four (2, 3, 6 and 7) complexes are crystallized in tetragonal system. The in vitro biological screening effects of the investigated compounds were tested against the bacteria Escherichia coli, Staphylococcus aureus and Streptococcus fecalis and the fungi Aspergillus niger, Trichoderma polysporum and Candida albicans by serial dilution method. A comparative study of the MIC values of the Schiff base and their Co(II) (6) and Cu(II) (8) complexes, indicates that the metal complexes exhibit higher or lower antimicrobial activity than the free ligand (L₂).     

13C NMR studies of some hydroxycoumarins and related compounds

The ¹³C chemical shifts and one-bond carbon-hydrogen coupling constants have been obtained for some hydroxycoumarins and their corresponding acetoxy and methoxy derivatives. The changes in the one-bond carbon-hydrogen coupling constants resulting from the conversion of a hydroxy group to an acetoxy group represent a simple method of assignment of the ¹³C NMR signals in coumarins which contain one or more hydroxy groups in the benzenoid ring.     

Synthetic procedure to pyrido[2,1-f][1,2,4]triazinium salt and related compounds

N-aminopyridyl ketone salts were reacted with formamide to yield heteroaromatic pyrido[2,1-f][1,2,4]triazinium salts. Upon storage of these products in the presence of water, formation of covalent hydrates have been observed. Reaction of the same starting compound with urethane yielded 3-chloropyrido[2,1-f][1,2,4]triazinium salt which readily reacted with secondary amines to afford 3-amino derivatives. An analogous ring closure reaction of 2-formylaminomethyl- and formaminobenzylpyridine allowed the synthesis of the partially reduced 3,4-dihydropyrido[2,1-f][1,2,4]triazinium compounds. The cyclization procedure was also applied for the synthesis of the related pyrimido[2,1-f][1,2,4]triazinium salt.     

Synthetic and structural studies of monocyclopentadienyl cyclometalated aryl tantalum(V) compounds

Cyclometalated aryl tetra- or trichlorido cyclopentadienyl tantalum complexes [TaXCl(3){C(6)H(4)(2-CH(2)NMe(2))-κ(2)C,N}] (X = Cl 1, η(5)-C(5)H(5)2, η(5)-C(5)H(4)(SiMe(3)) 3, η(5)-C(5)Me(5)4) containing a five-membered TaC(3)N chelate ring were synthesized by reaction of the TaXCl(4) (X = Cl, η(5)-C(5)H(5), η(5)-C(5)H(4)(SiMe(3)), η(5)-C(5)Me(5)) with the appropriate lithium aryl reagent [Li{C(6)H(4)(2-CH(2)NMe(2))}]. The reported complexes were studied by IR and NMR spectroscopy and the X-ray molecular structures of compounds 2, 3 and 4 were determined by diffraction methods. These compounds were theoretically analyzed by the DFT method and their structures were rationalized. The preferential coordination of the 2-{(dimethylamino)methyl}phenyl ligand was justified by an analysis of the molecular orbitals of the Ta(η(5)-C(5)H(5))Cl(3) and C(6)H(4)(2-CH(2)NMe(2)) fragments. In addition, the exchange pathways that account for the NMR equivalency of the Me(2)N- methyl groups and -CH(2)- hydrogen atoms of the coordinated C(6)H(4)(2-CH(2)NMe(2))-κ(2)C,N ligand were theoretically studied.     

Synthetic, spectroscopic, computational and structural studies of some 13-vertex ruthenacarboranes

Reduction of 1,2-closo-C2B10H12 followed by treatment with [RuCl2(p-cymene)]2(p-cymene = C6H4MeiPr-1,4) affords the 13-vertex ruthenacarborane 4-(p-cymene)-4,1,6-closo-RuC2B10H12, characterised both spectroscopically and, in two crystalline forms, crystallographically. Although asymmetric in the solid state, having a docosahedral cage architecture with cage C atoms at vertices 1 and 6, this species clearly has Cs symmetry on the NMR timescale at room temperature. However, the fluctional process in operation can be arrested at low temperature, and an activation energy of 43.1 kJ mol(-1) is estimated. A computational study of the related species 4-(eta-C6H6)-4,1,6-closo-RuC2B10H12 reveals that the fluctionality is due to a double diamond-square-diamond process, first suggested by Hawthorne et al for the analogous CpCo species. These calculations yield an activation energy of 40.4 kJ mol(-1), in excellent agreement with that derived from experiment. Reduction of 1,2-Ph(2)-1,2-closo-C2B10H10 followed by treatment with [RuCl2(eta-C6H6)]2 or [RuCl2(p-cymene)]2 yields the analogous species 1,6-Ph2-4-(eta-C6H6)-4,1,6-closo-RuC2B10H10 and 1,6-Ph2-4-(p-cymene)-4,1,6-closo-RuC2B10H10, respectively. These C,C-diphenyl compounds were again studied spectroscopically and crystallographically, the p-cymene species again showing two crystalline modifications. In contrast to their CpCo and Cp*Co analogues all three ruthenacarboranes do not undergo isomerisation in refluxing toluene.     

Synthetic and structural studies of cobalt-pivalate complexes

The synthesis and characterisation of a range of cobalt pivalate cage complexes are reported. The cages include: a dinuclear Co(II) complex; an oxo-centred Co(III) triangle; tetranuclear Co(II) heterocubanes and butterflies; tetranuclear heterovalent cobalt butterflies and hexanuclear edge-sharing bitetrahedra; heterovalent penta-, hexa- and hepta-nuclear cages based on [M(4)O(4)] heterocubane cores; and a tetradecanuclear cage based on heterocubanes sharing edges and vertices. Spectroscopic studies suggest that some of these cores are retained in solution, but that only in the Co(III) triangle is the structure including ligands retained. A scheme is proposed to account for the many structures observed, which may be applicable to other polymetallic cage complexes.     

Synthesis of substituted methyl 5,5-polymethylene-2,4-dioxotetrahydropyran-3-carboxylates

Dimethyl 2-(1-bromocyclohexylcarbonyl)-, 2-(1-bromocyclopentylcarbonyl)-, and 2-(1-bromocyclobutylcarbonyl)-2-methylmalonates reacted with zinc and aromatic aldehydes to give the corresponding methyl 1-aryl-4-methyl-3,5-dioxo-2-oxaspiro[5.5]undecane-4-, 6-aryl-9-methyl-8,10-dioxo-7-oxaspiro[4.5]-decane-9-, and 5-aryl-8-methyl-7,9-dioxo-6-oxaspiro[3.5]nonane-8-carboxylates.     

Synthetic, spectroscopic and structural studies of two novel phosphanyl(organyl)borane compounds

The titanium (II) complex, Cp₂Ti(HBcat)₂, catalyzes the hydroboration of diphenylvinylphosphine by catecholborane and pinacolborane to afford exclusive anti-Markovnikov phosphanyl(organyl)boranes cleanly, rapidly and in good yields. Spectroscopic and X-ray studies of the phosphanyl(organyl)borane products show no evidence of boron-phosphorus interaction, indicating that the compounds preclude formation of Lewis pairs.     

Synthesis of some highly functionalized thiophene-3-carboxylates and alcohols

Highly functionalized thiophenes are prepared by two methods. The first uses a lithium-halogen exchange reaction on a trisubstituted 5-bromothiophene 25 to generate the corresponding 5-lithiothiophene 26 which is then reacted with either dimethylformamide or formaldehyde to give the 5-formyl 28 or 5-hydroxymethylthiophene derivative 31 in good yields. These are further transformed to other tetrasubstituted thiophenes. The second method assembles the thiophene ring from three components: a benzyl mercaptan, an aldehyde, and a vinylphosphonate 10 . Thus, the benzyl mercaptan is dilithiated then reacted with an appropriate aldehyde to afford a 2-mercapto-2-phenylethanol derivative 37 . Michael addition of 37 to 10 followed by oxidation of the hydroxyl group furnishes ketophosphonate 39 . An intramolecular Wittig-type reaction produces the thiophene skeleton.     

Theoretical studies of some nonbenzenoid hydrocarbons—IV : Pleiadiene and related compounds

Pleiadiene and other similar compounds have been studied by the semi-empirical SCFMO method of Pariser, Parr and Pople using the core resonance integral value developed by Lo and Whitehead, Dewar et al. and Yamaguchi et al. It has been found that π^*←π transitions predicted by the methods of Lo and Whiteheadand Dewar et al. suitable for the prediction of ground state properties are also in good agreement with experimental results where available and comparable to those predicted by the method of Yamaguchi et al. developed for the prediction of spectral transitions. The resonance stabilization of the molecules 3,4.5,7,8 and 9 have also been studied. It is found that ethylinic linkage across the naphthalene moity in pleiadiene increases the resonance energy of the final compound, in contrast to our previous observation, i.e. ethylinic linkage across the naphthalene moiety reduces the resonance energy of the final compound.     

Synthetic and structural studies on C-ethynyl- and C-bromo-carboranes

A high-yield preparation of the C-monoethynyl para-carborane, 1-Me(3)SiC[triple bond]C-1,12-C2B10H11, from C-monocopper para-carborane and 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe(3) is reported. The low-yield preparation of 1,12-(Me3SiC[triple bond]C)2-1,12-C2B10H10 from the C,C'-dicopper para-carborane derivative with 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe3, has been re-investigated and other products were identified including the C-monoethynyl-carborane 1-Me3SiC[triple bond]C-1,12-C2B10H11 and two-cage assemblies generated from cage-cage couplings. The contrast in the yields of the monoethynyl and diethynyl products is due to the highly unfavourable coupling process between 1-RC[triple bond]C-12-Cu-1,12-C2B10H10 and the bromoalkyne. The ethynyl group at the cage carbon C(1) strongly influences the chemical reactivity of the cage carbon at C(12)-the first example of the "antipodal effect" affecting the syntheses of para-carborane derivatives. New two-step preparations of 1-ethynyl- and 1,12-bis(ethynyl)-para-carboranes have been developed using a more readily prepared bromoethyne, 1-bromo-3-methyl-1-butyn-3-ol, BrC[triple bond]CCMe2OH. The molecular structures of the two C-monoethynyl-carboranes, 1-RC[triple bond]C-1,12-C2B10H11 (R = H and Me3Si), were experimentally determined using gas-phase electron diffraction (GED). For R = H (R(G) = 0.053) a model with C(5v) symmetry refined to give a C[triple bond]C bond distance of 1.233(5) A. For R = Me3Si (R(G) = 0.048) a model with C(s) symmetry refined to give a C[triple bond]C bond distance of 1.227(5) A. Molecular structures of 1,12-Br2-1,12-C2B10H10, 1-HC[triple bond]C-12-Br-1,12-C2B10H10 and 1,12-(Me(3)SiC[triple bond]C)2-1,12-C2B10H10 were determined by X-ray crystallography. Substituents at the cage carbon atoms on the C2B10 cage skeleton in 1-X-12-Y-1,12-C2B10H10 derivatives invariably lengthen the cage C-B bonds. However, the subtle substituent effects on the tropical B-B bond lengths in these compounds are more complex. The molecular structures of the ethynyl-ortho-carborane, 1-HC[triple bond]C-1,2-C2B10H11 and the ethene, trans-Me3SiBrC=CSiMe3Br are also reported.     

Synthetic applications of 3‐(cyanoacetyl)indoles and related compounds

Various synthetic applications of 3‐(cyanoacetyl)indoles, as well as syntheses of some related indoles, have been investigated. Diethyl 2‐(1H‐indol‐3‐yl)‐2‐oxoethylphosphonate and a methyl derivative thereof have been prepared in one step from indole. Moreover, it was demonstrated that 3‐(cyanoacetyl)indoles are useful starting materials for the preparation of for example 3‐(1H‐indol‐3‐yl)‐3‐oxopropanamides, 3‐heteroarylindoles or 3‐heteroaroylindoles.