首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 187 毫秒
1.
以目标收益养老金计划(TBP)模型研究鲁棒最优投资问题, 其中养老金管理者对模型参数不确定带来的风险是模糊风险厌恶的. 养老金管理者为规避风险和增加收益将投资于无风险资产和风险资产. 考虑连续时间情形, 假设养老金计划参保人的缴费是确定的, 而参保人的收益给付是确定目标收益给付, 资金账户的收益风险由不同代际的参保人共同承担, 同时考虑随机工资及其与金融市场的相关性. 以参保人退休后养老金给付偏离目标的风险和代际之间风险分担的组合最小化为投资决策目标, 并采用指数函数的形式描述实际给付与目标给付的偏离, 利用随机最优控制方法, 建立相应的HJB方程并求解得到最优投资收益策略和最优给付策略的解析解. 通过数值示例分析了模型参数对最优投资和最优给付策略的影响.  相似文献   

2.
我们考虑即时给付的增额寿险模型,根据保费的实际投资情况以及突发事件对利率的影响,将随机利率采用反射布朗运动(RBM)和Poisson过程联合建模,给出即时给付的增额寿险的给付现值的各阶矩,并在死亡均匀分布的条件下得到矩的简洁表达式.最后用数值例子说明模型与计算方法的正确性与有效性.  相似文献   

3.
随机利率寿险模型   总被引:5,自引:0,他引:5  
本文针对随机利率寿险模型 ,考虑一保单组的平均给付额的性质 .通过对模型的结果分析 ,可以看出投保人数的增加 ,并未降低随机利率的风险 .本文针对一特殊的随机利率模型 ,给出了随机利率与常数利率的平均给付成本的比较  相似文献   

4.
一类随机利率下的增额寿险模型   总被引:30,自引:0,他引:30  
对寿险中的利率随机性问题的研究是近几年来保险精算研究的热点和重点问题之一。本文以即时给付的一类增额寿险为对象,考虑到突发事件对利率的影响,对随机利率采用Gauss过程与Poisson过程联合建模,给出即时给付的增额寿险的给付现值的各阶矩,并在一些特殊条件下给出矩的简洁表达式。  相似文献   

5.
一类随机利率下的确定年金   总被引:3,自引:0,他引:3  
我们考虑在一定的约束条件下利率是随机变量的某些确定年金的现值的计算问题,目的在于研究给付现值的期望和方差.本文给出两种方法计算在某些年内一类延付年金的现值之和的期望和方差,获得了给付现值的方差的递推关系,并且解决了这些关系,这在计算简单方面明显地更好.  相似文献   

6.
首先对文献[1]中在PA-α模型下有关保险费及收益的上下界的结论做了改进,其次给出了一种实际保费的加权计算公式,并给出实际例子说明了所得结果;最后本文讨论了PA-α模型中α未知的情况下,生存给付S=0,保险费Π给定,保险公司及投保人对死亡给付D的希望取值,并给出D的上下界的计算公式.  相似文献   

7.
息力函数综合寿险模型   总被引:5,自引:0,他引:5  
本以即时给付的综合人寿保险模型为研究对象,考虑到随机利率的影响,用负二项分布和Gamma分布联合建立息力积累函数模型,求出了分期缴费精算现值和给付保险金的精算现值表达式,并可由平衡方程进行保险定价。  相似文献   

8.
一类随机利率下的增额寿险   总被引:6,自引:0,他引:6  
王传玉 《运筹与管理》2005,14(2):125-128
寿险中的利率随机问题,是近来保险精算研究的热点和重点问题之一。本以即时给付的一类增额寿险为对象,对随机利率采用Gauss过程建模,研究给付现值及其各阶矩。  相似文献   

9.
随机利率下的增额寿险   总被引:21,自引:1,他引:21  
寿险中的利率随机性问题,是近年来保险精算研完的热点之一,本文以即时给付的毒额寿险为对象,对随机利率采用Gauss过程建模,研究给付现值及其各阶矩,并在死亡均匀分布假设下得到矩的简洁表达式。  相似文献   

10.
目前在人寿保险中,如何对付通货膨胀的不良影响,使对被保人的实际保障不致降低是一个重要问题。变额年金与变额寿险是因应通货膨胀的寿险产品中最有效的,但其给付额的计算比较复杂。本文扰某些变额年金与交额寿险保单的给付额的确定做了推导,并分析了利差在克服通货膨胀影响中的作用。  相似文献   

11.
Composite polymer materials based on PTFE containing ultradisperse -sialon (1–10 wt.%) as the cross-linking agent are studied. It is shown that the injection of small amounts of fillers (1–2 wt.%) increases the degree of composite crystallinity. A correlation between the structure, element distribution on the surface layers of samples, and tribotechnical characteristics of composites is found. The change in the physicomechanical characteristics is associated with the effect of the interstructural plasticization.Ammosov Yakutsk State University, Yakutsk, Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 797–806, November–December, 1999.  相似文献   

12.
Schr(o)dinger operator is a central subject in the mathematical study of quantum mechanics.Consider the Schrodinger operator H = -△ V on R, where △ = d2/dx2 and the potential function V is real valued. In Fourier analysis, it is well-known that a square integrable function admits an expansion with exponentials as eigenfunctions of -△. A natural conjecture is that an L2 function admits a similar expansion in terms of "eigenfunctions" of H, a perturbation of the Laplacian (see [7], Ch. Ⅺ and the notes), under certain condition on V.  相似文献   

13.
A cumulative-capacitated transportation problem is studied. The supply nodes and demand nodes are each chains. Shipments from a supply node to a demand node are possible only if the pair lies in a sublattice, or equivalently, in a staircase disjoint union of rectangles, of the product of the two chains. There are (lattice) superadditive upper bounds on the cumulative flows in all leading subrectangles of each rectangle. It is shown that there is a greatest cumulative flow formed by the natural generalization of the South-West Corner Rule that respects cumulative-flow capacities; it has maximum reward when the rewards are (lattice) superadditive; it is integer if the supplies, demands and capacities are integer; and it can be calculated myopically in linear time. The result is specialized to earlier work of Hoeffding (1940), Fréchet (1951), Lorentz (1953), Hoffman (1963) and Barnes and Hoffman (1985). Applications are given to extreme constrained bivariate distributions, optimal distribution with limited one-way product substitution and, generalizing results of Derman and Klein (1958), optimal sales with age-dependent rewards and capacities.To our friend, Philip Wolfe, with admiration and affection, on the occasion of his 65th birthday.Research was supported respectively by the IBM T.J. Watson and IBM Almaden Research Centers and is a minor revision of the IBM Research Report [6].  相似文献   

14.
Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.  相似文献   

15.
The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.  相似文献   

16.
This paper builds upon the Lp-stability results for discrete orthogonal projections on the spaces Sh of continuous splines of order r obtained by R. D. Grigorieff and I. H. Sloan in (1998, Bull. Austral. Math. Soc.58, 307–332). Properties of such projections were proved with a minimum of assumptions on the mesh and on the quadrature rule defining the discrete inner product. The present results, which include superapproximation and commutator properties, are similar to those derived by I. H. Sloan and W. Wendland (1999, J. Approx. Theory97, 254–281) for smoothest splines on uniform meshes. They are expected to have applications (as in I. H. Sloan and W. Wendland, Numer. Math. (1999, 83, 497–533)) to qualocation methods for non-constant-coefficient boundary integral equations, as well as to the wide range of other numerical methods in which quadrature is used to evaluate L2-inner products. As a first application, we consider the most basic variable-coefficient boundary integral equation, in which the constant-coefficient operator is the identity. The results are also extended to the case of periodic boundary conditions, in order to allow appplication to boundary integral equations on closed curves.  相似文献   

17.
This work addresses the problem of regularized linear least squares (RLS) with non-quadratic separable regularization. Despite being frequently deployed in many applications, the RLS problem is often hard to solve using standard iterative methods. In a recent work [M. Elad, Why simple shrinkage is still relevant for redundant representations? IEEE Trans. Inform. Theory 52 (12) (2006) 5559–5569], a new iterative method called parallel coordinate descent (PCD) was devised. We provide herein a convergence analysis of the PCD algorithm, and also introduce a form of the regularization function, which permits analytical solution to the coordinate optimization. Several other recent works [I. Daubechies, M. Defrise, C. De-Mol, An iterative thresholding algorithm for linear inverse problems with a sparsity constraint, Comm. Pure Appl. Math. LVII (2004) 1413–1457; M.A. Figueiredo, R.D. Nowak, An EM algorithm for wavelet-based image restoration, IEEE Trans. Image Process. 12 (8) (2003) 906–916; M.A. Figueiredo, R.D. Nowak, A bound optimization approach to wavelet-based image deconvolution, in: IEEE International Conference on Image Processing, 2005], which considered the deblurring problem in a Bayesian methodology, also obtained element-wise optimization algorithms. We show that the last three methods are essentially equivalent, and the unified method is termed separable surrogate functionals (SSF). We also provide a convergence analysis for SSF. To further accelerate PCD and SSF, we merge them into a recently developed sequential subspace optimization technique (SESOP), with almost no additional complexity. A thorough numerical comparison of the denoising application is presented, using the basis pursuit denoising (BPDN) objective function, which leads all of the above algorithms to an iterated shrinkage format. Both with synthetic data and with real images, the advantage of the combined PCD-SESOP method is demonstrated.  相似文献   

18.
Two kinds of model composite materials with finely divided (1) crystal fillers—LiF or polyethylene-filled epoxy resin cured by polyethylenepolyamine — are investigated by X-ray diffractometry. It is found that tensile stresses arise in LiF crystals, which show a strong adhesion interaction with the binder, for all degrees of filling (from =2.2 to =74 vol.%) examined. Their values remain constant up to a degree of filling at which the boundary layers come into contact with one another. Then, the inner stresses decrease with increasing . In the crystalline regions of polyethylene, where the adhesion between the binder and crystals is weak, the inner stresses are compressive. It is shown that the thickness of the boundary layer of the matrix on the surface of filler particles can be evaluated by the method used.Institute of Polymer Mechanics, Latvian University, Riga, LV-1006 Latvia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 807–820, November–December, 1999.  相似文献   

19.
A rigid isotopy of nonsingular real algebraic curves on a quadric is a path in the space of such curves of a given bidegree. We obtain the rigid isotopy classification of nonsingular real algebraic curves of bidegree (3, 3) on a hyperboloid and on an ellipsoid. We also study of the space of real algebraic curves of bidegree (3, 3) with a single node or cusp. Translated fromMatematicheskie Zametki, Vol. 66, No. 6, pp. 810–815, December, 1999.  相似文献   

20.
In this paper we study functions belonging to the classesV ε and ΛBV, which are encountered in the theory of Fourier trigonometric series. Necessary and sufficient conditions for the embedding of the classesH ω in the classesV ϕ and ABV are obtained. Translated fromMatematicheskie Zametki, Vol. 64, No. 5, pp. 713–719, November, 1998. This research was supported by the program “Leading Scientific Schools” under grant No. 96/97-15-96073.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号