Copper-catalyzed enantioselective cyanation of benzylic C–H bonds via radical relay

正Direct methods that enable stereoselective functionalization of C(sp~3)–H bonds could facilitate efficient preparation of therapeutics and agrochemicals,and shall have a major effect on the discovery and development of new pharmaceuticals.Although the transformations through C(sp~2)–H bond cleavage have been significantly developed in the past decades,the direct C(sp~3)–H functionalization,especially the asymmetric transformation is still a big challenge.Demon-     

Recent strategic advances for the activation of benzylic C–H bonds for the formation of C–C bonds

Alkylarenes, obtained from abundant hydrocarbon feedstock sources, are an attractive starting material for the formation of complex molecular architectures. Conventional activation strategies of the relatively inert sp³-hybridized benzylic C–H bonds usually require relatively harsh conditions and are difficult to apply to the synthesis of fine chemicals. The present review describes recent strategic advances for the activation of benzylic C–H bonds for the catalytic formation of C–C bonds. In particular, two activation methods, i.e., strategies that generate benzylic radicals or benzyl anions, are discussed.     

DDQ-mediated direct oxidative coupling of amides with benzylic and allylic sp3 C–H bonds under metal-free conditions

A simple and efficient method for the direct oxidative coupling of amides with benzylic and allylic sp³ C–H bonds using DDQ as an oxidant is described. A range of amides including benzamide, benzyl carbamate, and substituted sulfonamides reacted efficiently with various benzylic and allylic substrates under metal free conditions to afford amidation products in good to excellent yields.     

Site-selective oxidation of unactivated C–H sp3 bonds of oleanane triterpenes by Streptomyces griseus ATCC 13273

The oxidization of unactivated C–H bonds is of great interests in the structural modification of pentacyclic triterpenes. Herein we discovered the unique capability of Streptomyces griseus ATCC 13273 to catalyze the site-selective oxidation of C-29 methyl group to carboxyl group over a range of oleanane triterpenes, oleanolic acid (1), hederagenin (2), echinocystic acid (3), quillaic acid (4) and senegenin (5). Along with this reaction the hydroxylation on C-24 and C-21 were also discovered on some substrates. As a result, eight new compounds (1c, 2a～5a and 2b～4b) among the ten metabolites were isolated. The anti-inflammatory activities of these compounds were evaluated against lipopolysaccharide (LPS)-induced nitric oxide (NO) production in RAW 264.7 macrophages, and the products with hydroxyl group on C-21 (1c, 2b and 5a) showed significantly enhanced activities with the IC₅₀ values of 1.230, 0.078 and 0.015 μM, respectively. Thus S. griseus ATCC 13273 was further proved as a useful biocatalyst to expand the structural diversity of oleanane triterpenes for medicinal chemistry research.     

Dissociation energies of O–H bonds in 3-pyridinols

The O?H bond dissociation energy (D _O?H) has been estimated for 20 substituted 3-pyridinols and a substituted 3-pyrimidinol from experimental kinetic data by the intersecting parabolas method using α-tocopherol and 4-methoxyphenol as reference compounds. The following D _O?H values (kJ/mol) have been obtained: 363.7 for 3-pyridinol, 365.3 for 2-alkyl-3-pyridinols (five compounds), 358.8 for 2-alkyl-6-methyl-3-pyridinols (six compounds), 378.1 for 5-benzyl-3-pyridinol, 353.2 for 2,4,6-trimethyl-3-pyridinol, 340.9 for 2-benzyl-6-methoxy-3-pyridinol, 345.8 for 2,6-dimethoxy-5-benzyl-3-pyridinol, 381.7 for 2-ethyl-4-nitro-6-methyl-3-pyridinol, 376.8 for 2-isopropyl-4-nitro-6-methyl-3-pyridinol, 318.3 for 2,4-dimethyl-6-dimethylamino-3-pyridinol, 357.3 for mexidol, and 322.2 for 2,4-dimethyl-6-dimethylamino-3-pyrimidinol. The substituent effect on the O?H bond dissociation energy in 3-pyridinols is considered. The stabilization energies of pyridinoxyl and phenoxyl radicals are compared. The activation energies and rate constants have been calculated for a series of reactions of various radicals with 3-pyridinols.     

A powerful approach to alkoxy radical-mediated remote C(sp~3)–H bonds functionalization

正The activation of inert C(sp~3)–H bonds with control of reactivity and selectivity is one of the central topics in chemical sciences.In this context,alkoxy radical-mediated 1,5-hydrogen atom transfer allows the regioselective transfor-     

Syntheses of amides via iodine-catalyzed multiple sp~3 C–H bonds oxidation of methylarenes and sequential coupling with N,N-dialkylformamides

<正>~~     

FeCl_3·6H_2O-catalyzed selective reduction of allylic halides to alkenes with concomitant oxidation of benzylic alcohols to aldehydes

Iron-catalyzed direct reduction of allylic halides with benzylic alcohol was achieved,providing a new,simple,and efficient method for conducting highly regioselective hydrodehalogenation.This method not only features a readily available reductant,an inexpensive catalyst,simple manipulation,and good tolerance of functional groups including nitriles,nitro,esters,and methoxyl groups,it also has mild reaction conditions and shows complete regioselectivity in that only halides sited at the allylic position are reduced.Alternatively,this method can be applied in the selective transformation of benzylic alcohols to aromatic aldehydes without overoxidation to carboxylic acids.     

Lewis acid-catalyzed Csp3–H functionalization of methyl azaarenes with α-trifluoromethyl carbonyl compounds

A Lewis acid promoted Csp³–H bond functionalization of methyl azaarenes with α-trifluoromethylated carbonyl compounds is described. Catalytic amounts of Yb(OTf)₃ provided a straightforward access to the corresponding trifluoromethylated alcohols in excellent yields up to 94% under mild reaction conditions.     

Functionalization of Csp3–H Bond of Methyl Substituent in Quinaldine with 5-Arylfuran-2,3-diones

Russian Journal of Organic Chemistry - New effective method of direct functionalization of Сsp3–H bond in methyl substituent of quinaldine under the action of 5-arylfuran-2,3-diones was...     

Acid ionic liquid promoted addition of C(sp)–H bond to aldehyde

A novel protocol for acid ionic liquid promoted C(sp³)–H bond functionalization of alkyl azaarenes and nucleophilic addition to aldehydes was developed in good to excellent yields, which provides an efficient approach for the synthesis of alkyl-substituted azaarene derivatives. It is worthwhile to note that acid ionic liquid used for this reaction can be recycled and reused six times without a significant decrease in activity.     

Iron-catalyzed esterification of allylic sp3 C–H bonds with carboxylic acids: Facile access to allylic esters

The first general and efficient iron-catalyzed esterification of allylic sp³ C–H bonds with carboxylic acids using ionic iron(III) complexes (1–4) as a catalyst and DTBP (DTBP = di-tert-butyl peroxide) as an oxidant is achieved. A variety of allylic esters were synthesized in good to excellent yields using the ionic iron(III) complex 2 as a catalyst in a 5 mol% loading. This reaction is characterized by its high efficiency, broad substrate scope with excellent steric hindrance tolerance and good functional group compatibility.     

Silica/A153–SO3H: An efficient catalyst for the Baeyer–Villiger oxidation of cyclic ketones with hydrogen peroxide

Silica/A153–SO₃H was prepared and characterized by FT–IR, TG and SEM. It proved to be an efficient and recyclable heterogeneous catalyst in the Baeyer–Villiger (BV) oxidation of cyclic ketones with H₂O₂ as an oxidant. Catalysts with different silica particle sizes were also made comparisons in terms of catalytic effect.     

Ruthenium(III) catalyzed oxidation of paracetamol by chloramine-T in aqueous alkaline medium – A kinetic and mechanistic pathway

The kinetic study of ruthenium(III) chloride catalyzed oxidation of paracetamol by N-chloro-p-toluene sulfonamide (chloramine-T) in the alkaline medium has been performed. The reaction exhibits second order nature and the effect of the catalyst indicates the occurrence of uncatalyzed reaction simultaneously. Rate is decelerated by hydroxide ions. A plausible reaction mechanism has been suggested and the rate law is derived to account for such experiential observations. The activation parameters have been calculated. No evidence of the participation of free radicals is observed.     

Regioselective introduction of vinyl trifluoromethylthioether to remote unactivated C(sp~3)–H bonds via radical translocation cascade

Described herein is an efficient protocol for the regioselective introduction of a vinyl trifluoromethylthioether to remote unactivated C(sp~3)–H bonds. The cascade process involves the vinyl radical-mediated 1,5-hydrogen atom transfer(HAT) and remote vinyl migration. During the transformation, inert C–H and C–C bonds are consecutively cleaved under mild conditions.The reaction features good functional group tolerance, broad substrate scope, and high regio-/stereo-selectivity.     

A study of Pt–Pd/γ-Al2O3 catalysts for methane oxidation resistant to deactivation by sulfur poisoning

The catalytic oxidation of methane was studied over calcined and reduced Pt–Pd/γ-Al₂O₃ catalysts, in the presence and the absence of SO₂ in the CH₄–O₂ reaction feed. The effect of sulfation (SO₂ + O₂ for 4 h at 500 °C) was also studied on the catalyst resistance to deactivation by sulfur poisoning. Sulfating the calcined Pt–Pd/γ-Al₂O₃ catalysts resulted in a strong deactivation for the CH₄–O₂ reaction. However, the catalytic activity of the reduced-sulfated Pt–Pd/γ-Al₂O₃ catalyst for CH₄–O₂ reaction remained rather unaffected in the presence and in the absence of SO₂ in the reaction feed. XPS analysis revealed, over reduced-sulfated Pt–Pd/γ-Al₂O₃ catalysts, the presence of Pt(0) metallic surface species on which SO₂ interactions may be faster related to Pd surface species. The presence of Pt(0) may be necessary to prevent the interactions between SO₂ and Pd surface species. Long time catalytic tests showed that the activity of a reduced Pt–Pd/γ-Al₂O₃ catalysts for CH₄–O₂ reactions remained rather unaffected despite the presence of SO₂ in the reaction feed.     

Activation of C–H and H–H bonds by dinuclear iridium complexes. Oxidative addition to highly active unsaturated 32e− diiridium species

Reactions of [(Cp¹Ir)₂(μ-dmpm)(μ-H)₂][OTf]₂ (1) with NaO^tBu in aromatic solvent at room temperature give [(Cp¹Ir)(H)(μ-dmpm)(μ-H)(Cp¹Ir)(Ar)][OTf] [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furyl (5a), 3-furyl (5b)] via intermolecular aromatic C–H activation. Treatment of [(Cp¹Ir)₂(μ-dppm)(μ-H)₂][OTf]₂ (2) with weak base (Et₂NH) results in intramolecular C–H activation of a phenyl group in the dppm ligand to give [(Cp¹Ir)(H){μ-PPh(C₆H₄)CH₂PPh₂}(μ-H)(Cp¹Ir)][OTf] (6). Reaction of 1 with NaO^tBu in tetrahydrofuran under H₂ (1 atm) results in activation of the H–H bond to give [{(Cp¹Ir)(H)}₂(μ-dmpm)(μ-H)][OTf] (7). Reaction of 1 with NaO^tBu in dichloromethane under carbon monoxide (1 atm) gives a carbonyl-bridged Ir^II–Ir^II complex, [(Cp¹Ir)₂(μ-dmpm)(μ-H)(μ-CO)][OTf] (8-OTf). These results strongly suggest that the active species in C–H and H–H bond activation starting with 1 and 2 would be unsaturated 32e^? diiridium species. The structures of 3, 5a, 6, 7, and 8-BPh₄ have been determined by X-ray diffraction methods.     

Novel type of mixed O–H···N/O–H···π hydrogen bonds: monohydrate of pyridine

Investigation of characteristics of hydrogen bonding between pyridine and water by MP2/aug-cc-pvdz method reveals that these two molecules may form three types of hydrogen bonds depending on nature of proton withdrawal site of pyridine. Change of orientation of water with respect to plane of aromatic ring leads to transformation of the O–H···N bond to O–H···π bond via wide region of the potential energy surface where both lone pair of the nitrogen atom and π-system make significant contribution into hydrogen bonding. Hydrogen bond in this intermediate region may be considered as mixed O–H···N/O–H···π bond representing new type of H bonds.     

High pressure,a protocol to identify the weak dihydrogen bonds:experimental evidence of C–H···H–B interaction

Pressure, as a thermodynamic parameter, provides an appropriate method to detect weak intermolecular interactions. The C–H···H–B dihydrogen bond is so weak that the experimental evidence of this interaction is still limited. A combination of in situ high pressure Raman spectra and angle-dispersive X-ray diffraction(ADXRD) experiments was utilized to explore the dihydrogen bonds in dimethylamine borane(DMAB). Both Raman and ADXRD measurements suggested that the crystal structure of DMAB is stable in the pressure region from 1 atm(1 atm=1.01325×10~5 Pa) to 0.54 GPa. The red shift of CH stretching and CH_3 distortion modes gave strong evidence for the existence of C–H···H–B dihydrogen bonds. Further analysis of Raman spectra and Hirshfeld surface confirmed our proposal. This work provided a deeper understanding of dihydrogen bonds.And we wish that high pressure could be applied to identify other unconfirmed hydrogen or dihydrogen bond.     

BF3·Et2O promoted conjugate addition of ethanethiol to electron-deficient alkynes

An effective method for the synthesis of vinyl thioethers through the conjugate addition of ethanethiol to electron-deficient alkynes promoted by BF₃Et₂Ohas been developed.Electron-deficient internal alkynes react with ethanethiol in this system to yield mainly Z-isomer of vinyl thioether adducts,while electron-deficient terminal alkynes afford mainly E-isomer of vinyl thioether adducts.