可见光诱导的烯炔和多氟烷基卤环化合成含氟异喹啉酮

发展了一种可见光诱导的1,7-烯炔与全氟烷基卤串联原子转移自由基加成(ATRA)/环化合成含氟2,4-二氢异喹啉-2(1H)-酮的反应。以多氟烷基碘或溴为自由基前体,面式-三( 2-苯基吡啶)合铱(摩尔分数1%)为光敏剂,在5 W蓝光发光二极管(LED)照射下,多种苯桥联1,7-烯炔顺利发生串联(ATRA)/环化反应,以中等到优秀(62%~84%)的产率合成了一系列多氟化异喹啉酮衍生物。 此合成方法反应条件温和、清洁、高效且底物适用范围广,为具有潜在药用价值的多氟化2,4-二氢异喹啉-2(1H)-酮的合成提供新的途径。     

可见光诱导烯烃环化合成二氟烷基化异喹啉二酮

发展了一种可见光诱导的活泼烯烃串联自由基环化合成含氟异喹啉二酮的反应。 在可见光诱导下,多种N-烷基-N-甲基丙烯酰基苯甲酰胺与二氟溴乙酸乙酯发生自由基串联环化反应,以66%~75%的产率合成了一系列具有潜在生理活性的二氟烷基化异喹啉二酮。 此研究为合成具有潜在药用价值的氟取代异喹啉二酮提供了一条高效、条件温和的途径。     

可见光诱导烯烃串联加成环化合成多氟烷基化异喹啉二酮

发展了一种可见光诱导的活泼烯烃与全氟碘代烷串联加成环化合成多氟异喹啉二酮的反应。 在可见光诱导下,多种N-丙烯酰基-N-丁基苯甲酰胺衍生物与全氟碘代烷发生自由基串联加成环化反应,以54%~80%的产率合成了一系列的多氟取代异喹啉二酮衍生物。 为具有潜在药用价值的多氟取代异喹啉二酮合成提供了一条高效、条件温和、绿色的新途径。     

酸促进2-乙烯基苯胺与重氮的[5+1]环化合成2-芳基喹啉

利用廉价易得的2-乙烯基苯胺与重氮化合物在三氟乙酸催化下发生[5+1]环化反应, 以中等至良好的产率合成了24种2-芳基喹啉衍生物. 该方法无需金属催化剂, 官能团兼容性好, 反应成本低, 不仅拓展了重氮化合物参与的新型有机反应, 同时也为2-芳基取代喹啉的合成提供了高效、 经济且简洁的新方法.     

水相中可见光曙红Y催化合成异喹啉酮衍生物

建立了一种简单实用的在水相中可见光下2-卤代-N-苯基苯甲酰胺与二苯乙炔为原料,室温条件下,采用便宜、易处理且环境友好的曙红Y作光催化剂,催化反应获得较好收率的一系列的异喹啉酮类产物,生成相应的目标产物最高产率可达到86％,为异喹啉酮类化合物的合成提供了一种简便经济的方法.     

乙酸酐促进的[3+3]环化反应合成2-喹啉酮衍生物

2-喹啉酮结构单元广泛存在于天然产物和药物活性分子中,并且是重要的杂环合成砌块.建立了一种乙酸酐促进下,环状β-烯胺酮和丙二酸通过[3+3]环合反应构建2-喹啉酮化合物的新方法,产率为70％～87％.该方法具有原料简单易得、操作简便、路线简洁、目标化合物可修饰性强等优点.     

铜催化苯甲酰胺有氧环化合成7-叔烷基异喹啉二酮

发展了一种高效、简单的铜/空气催化体系催化的苯甲酰胺串联自由基环化合成7-叔烷基异喹啉二酮的反应。 在廉价CuI存在下,空气环境中,N-烷基-N-甲基丙烯酰基苯甲酰胺与AIBN发生串联自由基加成/环化/碳碳偶联反应,以52%~73%的产率合成了一系列的7-取代异喹啉二酮。 此研究为合成具有潜在药用价值的含氰取代异喹啉二酮提供了一条快速、简单、温和的构建途径。     

N-苯基和N-乙氧羰基甲基磷异喹啉酮及其衍生物的合成

以邻炔基苯磷酰胺为原料经Pd(II)催化的环化反应、环化偶联反应和氯环化反应高收率合成了15个N-苯基和N-乙氧羰基甲基磷异喹啉酮及其4-烯丙基、4-氯衍生物, 它们的结构均经过1H NMR, 13C NMR, MS, IR及元素分析确证.     

通过异喹啉盐与环状1,3-二酮一锅合成二氢异喹啉-3-酮-1,4-桥环结构

异喹啉盐具有两个亲电位点, 用它与双亲核试剂发生去芳构化/环化反应, 是高效构建异喹啉桥环结构的有效策略. 然而, 这一策略主要集中在1,3-桥环结构的合成. 最近利用异喹啉盐与4-羟基香豆素反应, 首次实现了二氢异喹 啉-3-酮-1,4-桥环的合成. 但是, 当用环状1,3-二酮代替4-羟基香豆素反应时, 意外地得到了异喹啉-1,3,4(2H)-三酮. 利用高分辨质谱分析发现, 这一意外转化是由于环状1,3-二酮发生O-亲核取代后, 消除2-溴-1,3-环状二酮, 得到4-溴异喹啉-3(2H)-酮. 该中间体发生两次连续水解/空气氧化后, 得到了异喹啉-1,3,4(2H)-三酮. 基于此机理的认识, 向反应体系中添加催化量的三氟甲烷磺酸后, 成功抑制了环状1,3-二酮的O-亲核取代反应, 顺利得到了二氢异喹啉-3-酮的1,4-桥环结构(33个反应实例). 反应条件温和, 提供了一种构建异喹啉1,4-桥环骨架的高效合成方法.     

甲氯喹酮的可见光诱导需氧氧化合成

报道了一种在无过渡金属条件下,以邻氨基苯甲酰胺和乙醇为底物,可见光诱导需氧氧化一锅合成甲氯喹酮的新方法。该方法在可见光诱导下,光敏剂作为分子间氢原子转移试剂,氧气作为氧化剂实现了乙醇到乙醛的氧化,然后乙醛与邻氨基苯甲酰胺反应形成甲氯喹酮。由于该反应条件简单、绿色,因此具有较好的应用前景。     

乙烯在Pt/Pt4+-TiO2上的可见光降解

以TiO2为主的光催化氧化技术存在太阳能利用率低(～5％)和光量子转化效率低(～4％)等缺点，使其工业应用受到制约，人们尝试用过渡金属离子掺杂和贵金属表面修饰等技术来提高催化剂对太阳能的利用率和光量子的转化效率，但目前将铂离子掺杂和铂金属表面修饰技术结合用于光催化     

Visible light photoredox catalysis with N-hydroxyphthalimide for [4+2] cyclization between N-methylanilines and maleimides

An efficient [4+2] cyclization of N-methylanilines with maleimides to afford tetrahydroquinolines using N-hydroxyphthalimide as a metal-free and cheap organophotoredox catalyst is reported. The protocol involves C(sp³)H activation of N-methylanilines for the formation of α-amino radical without an oxidant at room temperature. The present method describes an easy preparation of tricyclic heterocycles in good to excellent yields under mild reaction conditions.     

Visible Light Promotes Cascade Trifluoromethylation/Cyclization,Leading to Trifluoromethylated Polycyclic Quinazolinones,Benzimidazoles and Indoles

Efficient visible-light-induced radical cascade trifluoromethylation/cyclization of inactivated alkenes with CF₃Br, which is a nonhygroscopic, noncorrosive, cheap and industrially abundant chemical, was developed in this work, producing trifluoromethyl polycyclic quinazolinones, benzimidazoles and indoles under mild reaction conditions. The method features wide functional group compatibility and a broad substrate scope, offering a facile strategy to pharmaceutically produce valuable CF₃-containing polycyclic aza-heterocycles.     

具有可见光响应的C、N共掺杂TiO2纳米管光催化剂的制备

为了提高二氧化钛对可见光的利用效率,采用等离子体电解方法对二氧化钛实现了C、N共掺杂.掺杂通过等离子体电解HCONH2、NaNO2、(NH2)2CO产生活性N、C实现.XPS结果表明,C、N掺杂进入了氧化钛晶格.紫外漫反射光谱分析表明,氧化钛对可见光(＞400 nm)的响应增强,其光催化降解能力也大大增强.C、N共掺杂TiO2是一种利用太阳能的理想的光催化剂.     

N、F共掺杂TiO2可见光响应光催化剂的酸催化水解法制备及表征

采用酸催化水解法由TiCl4、NH4F混合液合成N、F共掺杂可见光响应TiO2光催化剂(TONF). 以苯酚为模型物, 考察了催化剂在可见光区、紫外光区的催化活性. 采用X射线光电子能谱(XPS)、紫外-可见漫反射光谱(DRS)、X射线衍射(XRD)、扫描电子显微镜(SEM)及低温氮物理吸附对光催化剂的晶相结构、光谱特征和表面结构等进行表征. 结果表明, 适量的N、F共掺杂TONF催化剂表现出较高的可见光催化活性. N、F共掺杂可显著提高TiO2分散性能, 促进锐钛矿相的形成, 抑制其向金红石相转变, 提高相转变温度. N掺杂可提高TiO2在可见光区的吸收; F掺杂可使TiO2能隙变窄.     

Visible‐Light‐Promoted Cascade Radical Cyclization: Synthesis of 1,4‐Diketones Containing Chroman‐4‐One Skeletons

A visible‐light‐induced cascade radical cyclization of aroyl chlorides with 2‐(allyloxy)‐benzaldehyde derivatives has been developed. The method takes advantages of unactivated C=C bonds as the acyl radical acceptors and offers a mild and green approach for the synthesis of 1,4‐diketones bearing biologically important chroman‐4‐one skeletons with moderate to good yields.     

可见光响应光触媒的测试研究

在液-固相光催化反应体系,采用自旋捕捉-电子自旋共振（ESR）技术,进行可见光响应光触媒的测试研究。在光催化反应体系中加入自由基捕捉剂5-二乙氧基磷酰基-5-甲基-1-吡咯啉-氮氧化物（DEPMP0）,测试不同的光辐射条件下溶液的ESR波谱,测试跟踪光催化反应过程中自由基的动态。本法简便、准确、快捷,可用于光触媒性能的测试以及光催化反应机理的研究。     

核壳结构NH2-UiO-66@TiO2的制备及其可见光下的甲苯降解性能研究

Metal-organic frameworks (MOFs) are of significant interest for photocatalysis using visible light, but they are typically limited by the instability and high recombination ratio of photoexcited pairs. Integrating MOFs into an inorganic semiconductor is one of the most widespread methods to promote their activity. In this study, a core-shell structured MOF@TiO₂ (NH₂-UiO-66@TiO₂) was synthesized as an efficient photocatalyst for the degradation of toluene. Pristine NH₂-UiO-66 was synthesized by a hydrothermal method as the core, which was then coated with an amorphous TiO₂ shell. Compared with pristine NH₂-UiO-66 and other samples prepared by the direct mixing of NH₂-UiO-66 and TiO₂, NH₂-UiO-66@TiO₂ exhibited a higher degradation rate of toluene. Using NH₂-UiO-66@TiO₂ as a catalyst, the degradation efficiency of toluene reached 76.7% within 3 h, which is 1.48 times higher than that of NH₂-UiO-66. The degradation performance was also stable in four repeated reuse experiments, and the slight deactivation was reactivated after washing with ethanol. A series of characterization methods were used to determine the physicochemical properties of NH₂-UiO-66@TiO₂, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Using the measured physicochemical properties, the photocatalytic mechanism of NH₂-UiO-66@TiO₂ was explored. NH₂-UiO-66 is an ideal photocatalyst, with visible-light response and a huge specific surface area (914.9 m²·g^-1), which is favorable for the utilization of sunlight as well as the absorption of pollutants in indoor air. In addition, a new interface formed between the two components (NH₂-UiO-66 and TiO₂), which efficiently broaden the light absorption area and enhanced the utilization of photogenerated species. The photogenerated holes and electrons could transfer through the interlayer as soon as they were formed. It is speculated that holes would transfer to the HOMO of NH₂-UiO-66, and then combine with H₂O molecules to form hydroxyl radicals (·OH). At the same time, more electrons tended to combine with oxygen molecules in the conduction band of TiO₂ rather than recombine with holes. Consequently, the recombination rate of electrons and holes decreased, while the quantity of oxygen radicals and hydroxyl radicals increased. Toluene was efficiently oxidized by these two types of radicals. Owing to the outstanding properties mentioned above, the strategy of constructing NH₂-UiO-66@TiO₂ is considered to be an effective approach. This work may provide new insights into the design of core-shell structured MOF@photocatalysts for the photocatalytic degradation of indoor air pollutants.      

可见光响应Bi2WO6薄膜的制备与光电化学性能

采用非晶态配合物-提拉法在ITO导电玻璃基底上制备得到Bi2WO6薄膜. 采用FE-SEM、XRD、Raman、DRS、光电流响应谱、IPCE等手段, 研究了Bi2WO6薄膜的形貌、结构、光电性能以及薄膜结构与光电性能的关系. 结果表明, 450 ℃以上煅烧可以得到Bi2WO6结晶薄膜, 薄膜由沿(131)晶面趋向生长的Bi2WO6纳米颗粒组成, 颗粒的粒度随煅烧温度的升高而增大, 同时颗粒之间的间距也相应增大. ITO/Bi2WO6薄膜电极在可见光(λ>400 nm)照射下可以产生光电流, 光电流强度与光强度线性相关; 光电流强度和光电转换量子效率受Bi2WO6薄膜结构的影响, 通过控制薄膜的煅烧温度等制备条件, 可以提高薄膜光电极的光电转换量子效率.