Cu-nanoparticle catalyzed O-arylation of phenols with aryl halides via Ullmann coupling

Recyclable Cu-nanoparticles provide an efficient, economic, and novel method for the synthesis of diaryl ethers via Ullmann type coupling. This method provides a wide range of substrate applicability and avoids the use of a heavy metal co-catalyst and gives diaryl ethers in satisfactory yields.     

Cu2O/SiC高效催化卤代芳烃与酚类的Ullmann偶联反应

卤代苯与酚类化合物反应制取二芳基醚是现代有机合成中的一个重要反应.传统的二苯醚合成方法是铜催化卤代苯与酚类化合物的Ullmann型C-O偶联反应,但是这种方法需要苛刻的反应条件.后来,人们发现了Pd(0)和Cu(Ⅰ)基催化剂,但是前者成本较高,且需要使用昂贵的配体,因此其应用受到了限制,而铜作为一种成本较低的催化剂受到了越来越多的关注.铜催化剂可以分为均相和非均相两大类.均相铜催化剂使用的是铜盐,并且需要加入配体,成本较高,且不易分离和循环利用.非均相铜催化剂研究较多的是CuO,Cu2O及Cu纳米颗粒,其中Cu2O纳米颗粒催化剂对Ullmann型C-O偶联反应具有很高的催化活性,但是它在潮湿的空气中容易被氧化,因此需要寻找一种合适的载体防止Cu2O纳米颗粒被氧化.SiC具有优良的化学稳定性及导电导热性能,并且作为载体己经成功应用到很多热催化及光催化反应中.本文以高比表面积的SiC为载体,以二乙二醇作为溶剂和还原剂,采用传统的两步液相还原法制备了Cu2O/SiC催化剂,并通过X射线衍射、X射线光电子能谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和H2程序升温还原等方法对Cu2O/SiC催化剂进行了表征.SEM和TEM结果表明,Cu2O纳米颗粒均匀分散在SiC表面,同时上述表征结果都表明Cu在SiC上主要以Cu2O的形式存在.将制备的Cu2O/SiC催化剂用于催化卤代芳烃与酚类的Ullmann C-O偶联反应中.以碘苯和苯酚的Ullmann C-O偶联反应为模型实验,考察了反应温度、反应时间、溶剂、碱的种类及用量和催化剂用量等条件的影响,得到了碘苯与苯酚UllmannC-O偶联反应的最优反应条件为:卤代芳烃14 mmol,酚类14 mmol,1.0当量的Cs2CO3,Cu2O/SiC(5 wt％) 10 mg,四氢呋喃10mL,在Ar气氛下150℃反应3h.在该条件下,二苯醚收率达到97％,转化频率(TOF)高达1136 h-1.Cu2O/SiC催化剂对Ullmann C-O偶联反应具有很好的普适性,并且对Ullmann C-S偶联反应也表现出很高的活性,TOF高达1186h-1.以碘苯和苯酚的Ullmann C-O偶联反应为基准实验,对催化剂的循环稳定性进行了考察.Cu2O/SiC催化剂五次循环后二苯醚的收率从97％降低至64％,这主要是由于活性组分Cu2O的流失所致.     

Copper oxide nanoparticles catalyzed synthesis of aryl sulfides via cascade reaction of aryl halides with thiourea

Recyclable copper oxide nanoparticles catalyzed simple and highly efficient protocol for the synthesis of symmetrical aryl sulfides was developed by the cross-coupling of aromatic halides with inexpensive and commercially available thiourea which was used as an effective sulfur surrogate. The present cross-coupling protocol of thiourea, via cascade reaction with various substituted aryl halides, producing desired aryl sulfides, has an added advantage of avoiding foul-smelling thiols.     

Copper-catalyzed N-arylation of 2-arylindoles with aryl halides

10 mol% Cul combined with the DMEDA ligand can efficiently catalyze the N-arylation of 2-arylindoles with aryl iodides and aryl bromides in good to excellent yields. The aryl halides bearing electron-rich or electron-deficient functional groups can be well tolerated under this mild reaction conditions.     

A simple catalyst system for the palladium-catalyzed coupling of aryl halides with terminal alkynes

A convenient catalyst system consisting of Pd(OAc)₂, PPh₃, K₃PO₄ and DMSO was found to be effective for the coupling reaction of aryl halides with terminal alkynes as well as the deacetonative coupling reaction using a 4-aryl-2-methylbut-3-yn-2-ol as a terminal alkyne precursor. An iminophosphine as a ligand worked more effectively for some combination of substrates than triphenylphosphine.     

An efficient copper-catalyzed coupling reaction of pyridin-2-ones with aryl and heterocyclic halides based on Buchwald's protocol

An efficient copper-catalyzed coupling reaction based on the Buchwald's protocol has been established for pyridin-2-ones with aryl iodides, aryl bromides, and heterocyclic bromides.     

N-arylation of indoles with aryl halides using copper/glycerol as a mild and highly efficient recyclable catalytic system

A simple, efficient, and inexpensive copper catalyzed protocol has been developed for cross-coupling of indoles with aryl halides by using glycerol as a green recyclable solvent and DMSO as an additive. The reaction was carried out at low catalyst loading furnishing various N-aryl indoles in good to excellent yield. This copper/glycerol mixture was recycled up to four runs without any loss in its catalytic activity.     

An improved protocol for synthesis of N-arylamides and benzoxazoles by the copper-catalyzed reaction of aryl halides with nitriles

An improved protocol for the synthesis of N-arylamides and benzoxazoles by the copper-catalyzed reaction of aryl halides with nitriles has been developed. Use of acetaldoxime as the hydrolysis reagent instead of H₂O facilitates the operation of the reaction. The significantly decreased amount of nitriles, along with use of weak base K₂CO₃ instead of strong base KOH, makes this transformation atom-efficient and environmentally benign. A variety of N-arylamides and benzoxazole derivatives can be synthesized according to this approach.     

Room temperature dehalogenation of (hetero)aryl halides with magnesium/methanol

Magnesium in methanol was found to be an effective and inexpensive reagent for the dehalogenation of (hetero)aryl chlorides, bromides and iodides under mild conditions. The halogen/hydrogen exchange proceeded at room temperature and tolerated functional groups such as esters, nitriles, alcohols, and alkenes.     

Copper-catalyzed synthesis of phenols from aryl halides and 4-methoxylbenzyl alcohol

A catalytic method was developed to synthesize substituted phenols from the corresponding aryl bromides and chlorides under mild conditions (yields = 34–92%). 4-Methoxylbenzyl alcohol was used as water surrogate and CuI/3,4,7,8-tetramethyl-1,10-phenanthroline was used as catalyst to achieve the C–O cross-coupling.     

An efficient catalyst system for diaryl ether synthesis from aryl chlorides

The combination of 2-phosphino-substituted N-arylpyrroles or related indoles (cataCXium^®P) and Pd(OAc)₂ allows for efficient cross-coupling reactions of aryl chlorides and phenols to give diaryl ethers. A variety of aryl and heteroaryl chlorides can be coupled with substituted phenols showing unprecedented catalyst turnover numbers.     

Pd/C-mediated coupling of aryl halides with terminal alkynes in water

2-Aminoethanol facilitated the alkynylation of aryl halides (Sonogashira reaction) under palladium/charcoal-copper catalysis in water affording a mild and practical method for the synthesis of arylalkynes. A variety of terminal alkynes were coupled with aryl iodides and bromides possessing no hydrophilic functional groups to give the coupled products in good to excellent yields.     

Tetraphosphine/palladium catalysed Suzuki cross-coupling reactions of aryl halides with alkylboronic acids

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as a catalyst, a range of aryl bromides and chlorides undergoes Suzuki cross-coupling with alkylboronic acids in good yields. Several alkyl substituents such as ethyl, n-butyl, n-octyl, isobutyl or 2,2-dimethylpropyl on the alkylboronic acids have been successfully used. The functional group tolerance on the aryl halide is remarkable; substituents such as fluoro, methyl, methoxy, acetyl, formyl, benzoyl, nitro or nitrile are tolerated. Furthermore, this catalyst can be used at low loading, even for reactions of sterically hindered aryl bromides.     

Pd/C: an efficient, heterogeneous and reusable catalyst for carbon monoxide-free aminocarbonylation of aryl iodides

Carbon monoxide-free aminocarbonylation is carried out efficiently via coupling of N,N-dimethylformamide (DMF) with aryl iodides using Pd/C as a heterogeneous catalyst. The catalyst exhibits remarkable activity and is reusable for up to three consecutive cycles. The reaction is applicable to a wide variety of substituted aryl iodides with different steric and electronic properties providing excellent yields of the corresponding tertiary amides.     

A general and efficient CuI/BtH catalyzed coupling of aryl halides with thiols

We report an exceptionally mild, general and efficient copper catalyzed cross coupling reaction of aryl bromides and thiols using 0.5 mol % CuI and 1 mol % benzotriazole. Experimental simplicity, generality, functional group tolerance and low cost of the catalyst are advantages of the protocol.     

Highly efficient recyclable heterogeneous palladium catalyst for C-C coupling, amination and cyanation reactions

An inexpensive, air-moisture stable and reusable PS-Pd(II)-anthra complex was synthesized by reacting chloro-methylated polystyrene with anthranilic acid to get polymer anchored ligand which was then reacted with PdCl₂ to get polymer anchored complex. This complex was characterized by different spectroscopic and elemental analyses. The activity of the Pd-complex as catalyst was tested for the Suzuki, Heck, Sonogashira cross-coupling and also for amination and cyanation reactions under various conditions. The catalyst exhibits high catalytic activities for the coupling of various aryl halides with organoboronic acid, alkene, alkyne and amine along with the cyanation of aryl halides providing excellent yields of desired product. Further, the catalyst can be easily recovered quantitatively by simple filtration and reused up to five times without sufficient loss of its catalytic activity.     

Highly efficient and magnetically separable nano-CuFe_2O_4 catalyzed S-arylation of thiourea by aryl/heteroaryl halides

The non-toxic and magnetically separable nano-CuFe_2O_4 catalyzed synthesis of symmetrical aryl sulfides by the reaction of thiourea with a wide variety of aryl halides,including aryl chlorides has been reported.Excellent yields of products have been obtained under ligand-free conditions and without the use of any expensive catalyst,such as palladium.     

Monodentate phosphorus-coordinated palladium(Ⅱ)complexes as new catalyst for Mizoroki-Heck reaction of aryl halides with electron-deficient olefins

Four novel monodentate phosphorus-coordinated palladium(Ⅱ) complexes derived from 3,5-disubstituted-1H-1,2,4-diazaphospholes were developed as efficient catalyst for Mizoroki-Heck reactions of aryl halides with electron-deficient olefins. The role of these monophosphine ligands in catalysis was illustrated by control experiments using Pd salt and ligands as combined catalyst.     

Investigation of the scope and mechanism of copper catalyzed regioselective methylthiolation of aryl halides

Methylthiolation of structurally diverse aryl halides was accomplished under fluoride free conditions using catalytic amounts of CuI, and DMSO as the methylthiolation source. Optimization studies unveiled several varieties of promoters among which Zn(OAc)₂ was found ideal. The analogous reaction with DMSO-d₆ afforded corresponding deuterated aryl methyl thioether with 99% purity. Mechanistic studies revealed CuSMe as the active methylthiolation agent.     

Nanocrystalline TiO_2 as an efficient and reusable catalyst for the chemoselective trimethylsilylation of primary and secondary alcohols and phenols

Nanocrystalline TiO₂ was used as an efficient and recyclable catalyst for the chemoselective trimethylsilylation of primary and less hindered secondary alcohols and phenols with hexamethyldisilazane（HMDS）.All reactions were performed under mild and completely heterogeneous conditions in good to excellent yields.