基于波数域直接求解法的正交加筋板声辐射研究

为了研究正交加筋板的声辐射问题,基于波数域直接求解法,建立了研究正交加筋板声辐射特性的理论模型。先利用傅里叶变换法求解周期结构的声振理论模型,得到波数域中关于结构响应的无限大耦合代数方程组,采用数值方法将其截断成有限项求解,结合稳相法便可快速获得远场辐射声压。该方法对单向和正交加筋板的预测结果与现有文献中的理论结果取得了良好的吻合,验证了理论模型的准确性和可靠性;并进一步通过数值算例研究了作用点位置,加强筋间距及平板厚度对结构声辐射特性的影响。     

一种分析周期加筋板声辐射的高效方法

为了研究周期加筋板的声辐射特性,建立了一种计算水中周期加筋板在简谐点力作用下的远场辐射声压的高效方法。该方法借助于傅里叶变换法只要先将耦合系统的声振方程,加强筋的弯曲和扭转运动方程,声学波动方程和耦合边界条件转换到波数域中,联合求解得到一组关于平板横向位移的无限大耦合代数方程组,再将该方程组截断成有限大小由数值方法求出波数域中的位移响应,便可结合稳相法得到远场辐射声压。与现有方法给出的结果对比发现二者完全吻合,验证了本文方法的有效性;通过数值方法研究了激励力位置、板厚,加强筋间距和宽度对周期加筋板声辐射特性的影响,得到了具有实际意义的结论。     

高效半解析方法分析周期正交加筋板的振动-声辐射特性

为了对水下无穷大双周期正交加筋板结构模型在简谐面力激励下的振动响应及声辐射特性进行更为合理的理论预测与分析,建立了加筋板结构的数学模型。结合傅里叶变换、泊松迭加公式及空间波数法,将周期加筋板的振动响应及辐射声压表达为关于结构位移谐波分量的函数方程,对加筋板模型提出了高效分析求解方法并进行了谐波分量截断求解。验证了方法的正确性,并分析了结构的振动特性以及加强筋周期间距和扭矩对辐射声压的影响。结果表明,加强筋的扭转作用影响加筋板结构的振动模态频率,对于较高精度要求的工程应用,加强筋的扭转作用不能忽略。通过调节加强筋周期间距及横截面尺寸,可以降低薄板在较低频域区间的远场辐射声压。     

基于声辐射模态的有源控制解耦在固定支承板上的研究

基于声辐射模态的主动控制理论,以固定支承板为例,通过四组作动器在固定支承板上的布放,使其能分别控制不同阶声辐射模态辐射的声功率,来使控制方程解耦,从而设计了比较简单与稳定的单输入/单输出控制系统,模拟计算取得了较好的控制效果。同时本文对控制过程中的溢出等问题进行了一定的探讨。     

基于联合波叠加法的浅海信道下圆柱壳声辐射研究

针对浅海信道下弹性结构声辐射预报尚无高效可靠的研究方法,提出了一种浅海信道下弹性结构声辐射快速预报的联合波叠加法.该方法结合了浅海信道传输函数、多物理场耦合数值计算法和波叠加法理论,运用该方法可对浅海信道下弹性结构辐射声场进行快速预报.经数值法和解析解法验证后,从信道下辐射源、环境影响和辐射声场测量的角度研究分析了浅海信道下弹性圆柱壳的声辐射特性,阐释了进行浅海信道下结构声辐射研究的必要性.研究结果表明,仅在低频浅海信道下弹性结构可近似等效为点源,信道上下边界对声场产生显著的耦合影响,高频段的空间声场指向性分布尤为明显,垂直线列阵进行信道下结构辐射声功率测量时,测量结果受到信道环境边界和潜深的影响较大.     

矩形板声辐射预测中速度采样问题的研究

为减少系统的复杂度和成本,基于无限大障板上振动矩形板模型,研究了声辐射预测中板表面速度采样问题。从理论上分析了影响速度采样间隔选取的因素,得到了低频时采样间隔由振动模态决定,高频时采样间隔由振动频率决定的结论。数值结果显示临界频率应满足k_csinθ=const(k_c=2πF_c/c,F_c为临界频率,θ为观察点倾斜角,c为声波波速)的规律,并且通过数值模拟和实验验证了该规律的适用性。     

Vibro-acoustic response of orthogonally stiffened panels: The effects of finite dimensions

This paper investigates the effects of finite dimensions on the vibro-acoustic response of orthogonally stiffened panels. Three types of excitations are considered: acoustical excitation, point force excitation and random excitation by a turbulent boundary layer. In each case, a spatially windowed periodic model is compared with a Rayleigh-Ritz model where the modes of the un-stiffened panel are used as the basis functions. The latter model accounts for the reflected wave field generated at the boundaries by assuming that the panel is simply supported. On the contrary, the windowed periodic model only accounts for finiteness on sound radiation (the assumption of an infinite periodic structure is used to calculate the panel response). Numerical studies show that when the bending wavelength becomes comparable or smaller than the stiffener spacing, the periodic model is able to reproduce the results obtained with the Rayleigh-Ritz model. To complement the study, the developed models are compared with numerical simulations (finite element method) and with experimental results.     

Acoustic radiation force analysis using finite difference time domain method

Acoustic radiation force exerted by standing waves on particles is analyzed using a finite difference time domain Lagrangian method. This method allows the acoustic radiation force to be obtained directly from the solution of nonlinear fluid equations, without any assumptions on size or geometry of the particles, boundary conditions, or acoustic field amplitude. The model converges to analytical results in the limit of small particle radii and low field amplitudes, where assumptions within the analytical models apply. Good agreement with analytical and numerical models based on solutions of linear scattering problems is observed for compressible particles, whereas some disagreement is detected when the compressibility of the particles decreases.     

Analytical solution based on the wavenumber integration method for the acoustic field in a Pekeris waveguide

An exact solution based on the wavenumber integration method is proposed and implemented in a numerical model for the acoustic field in a Pekeris waveguide excited by either a point source in cylindrical geometry or a line source in plane geometry. Besides, an unconditionally stable numerical solution is also presented, which entirely resolves the stability problem in previous methods. Generally the branch line integral contributes to the total field only at short ranges, and hence is usually ignored in traditional normal mode models. However, for the special case where a mode lies near the branch cut, the branch line integral can contribute to the total field significantly at all ranges. The wavenumber integration method is well-suited for such problems. Numerical results are also provided, which show that the present model can serve as a benchmark for sound propagation in a Pekeris waveguide.     

Nonlinear flutter analysis of stiffened composite panels in super-sonic flow

The flutter instability of stiffened composite panels subjected to aerodynamic forces in the supersonic flow is investigated. Based on Hamilton's principle,the aeroelastic model of the composite panel is established by using the von Karman large deflection plate theory,piston theory aerodynamics and the quasi-steady thermal stress theory. Then,using the finite element method along with Bogner-Fox-Schmit elements and three-dimensional beam elements,the nonlinear equations of motion are derived. The effect of...     

直接数据域局域联合混响抑制方法研究

针对非平稳条件下混响抑制问题,提出一种可利用待测数据统计信息的直接数据域局域联合(D³JDL)空时自适应方法。不同于级联方法,该方法没有独立运行直接数据域空时自适应和局域联合方法,仅在待测空时样本内用直接数据域空时自适应原理构造非期望数据矩阵,用于获取待测样本的统计信息,并作为局域联合方法的输入进行降维空时处理。由于D³JDL方法不存在待测样本与学习样本之间统计特性失配的问题,且较好地利用了统计信息,因此具备良好的非平稳环境适应能力。仿真和实验数据处理结果表明,D³JDL方法抗混响效果优于常规波束形成加匹配滤波处理和其它空时自适应处理方法。     

Numerical analysis of one-shot full-range FD-OCT system based on orthogonally polarized light

Full-range Fourier domain optical coherence tomography (FD-OCT) is generally achieved using a phase shifting algorithm. A novel design is presented for a one-shot full-range Fourier domain optical coherence tomography (FD-OCT) system utilizing orthogonally polarized light. The phase-shifted interferograms required to reconstruct the sample structure are obtained using an apochromatic quarter-wave retarder rather than a mechanical scanning operation, and thus the imaging results are free of vibrational-induced errors. The numerical analysis shows that it enhances the quality of high resolution FD-OCT and reduces the acquisition time. Moreover, the simulation results show that the proposed system is robust toward both the presence of noise in the power spectrum of the super luminescent diode (SLD) and a slight non-orthogonality of the two light beams incident on the spectrum analyzers, respectively.     

求解水中加肋板声辐射特性的虚拟声源法*

发展一种利用虚拟声源离散声场的方法求解加肋板在水中的声振耦合问题。由波叠加原理和单元体积速度匹配的原则,根据离散的结构单元满足的动力方程和结构与介质的交界相容性条件,确定虚拟声源强度,计算结构的声辐射功率。本文以简支矩形加肋板为例,在不获得结构表面振速和声压的情况下,计算了结构在水中的声辐射功率,并与解析方法计算的结果进行了比较,表明了该方法具有较好的计算精度。