首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 156 毫秒
1.
一种新的数字散斑振动定量分析系统   总被引:1,自引:1,他引:1       下载免费PDF全文
在数字散斑干涉(DSPI)测量方法中,数字散斑时间平均法测量振动时得到的是贝塞尔条纹,其定量分析比较困难。该文采用贝塞尔条纹准相移技术进行数字散斑振动定量分析,即在参考光路中引入和物体同频率的偏置参考振动,当参考振动的相位改变时,振动条纹会产生移动,这相当于静态余弦条纹的相移,可以采用相移算法对数字散斑振动测量的贝塞尔条纹进行定量分析。文中开发了一种新的数字散斑振动定量分析系统,研制了一种低压光学相移器和测量控制电路,给出了圆周固定圆片和四周固定方铜板的振动测量结果。实验结果表明:采用本系统可以方便地定量测出物体的振动模态。  相似文献   

2.
三维电子散斑干涉技术及其应用研究   总被引:11,自引:5,他引:11  
孙平  王海峰  张熹  杨福俊 《光学学报》2003,23(7):40-844
通过大错位剪切镜和一作为参考物的压电陶瓷相移器将三个电子散斑干涉系统组成一新的三维电子散斑干涉系统。利用该系统,结合相移技术和图像处理技术,可得到独立的位移场(u,v和w场)。该技术的特点是用三个激光器作为光源,一个压电陶瓷相移器产生参考光并实现相移,CCD摄像机前放置大错位剪切镜以使物光和参考光产生干涉。将该技术应用到柴油发动机零部件测量上,得到了主轴承孔周的三维位移场。  相似文献   

3.
孙海滨  孙平 《光子学报》2016,(11):135-139
设计了基于光学涡旋相移技术的离面位移测量实验方案,实现了电子散斑干涉中相移的数字控制.该方法利用输入液晶空间光调制器中的叉形光栅产生涡旋光束,通过涡旋光束绕轴的旋转产生相移;同时,产生的涡旋光束又作为参考光与物光干涉.实验中,在物体发生离面位移前后依次输入四幅叉形光栅,产生相移步长为π/2的涡旋光束,利用CCD获得涡旋光与物光的干涉光场,从而获得离面位移场的包裹相位;再通过解包裹,获得物体离面变形的相位变化.光学涡旋相移法可应用于离面位移测量.  相似文献   

4.
冯秀  陈旭  徐楠  陈凡秀  谢欣  杨连祥 《应用光学》2013,34(3):457-462
采用离面位移测量精度达到10 nm~20 nm的电子散斑干涉测量系统验证了双目视觉数字散斑相关测量系统的离面位移测量精度。分别用电子散斑干涉测量系统和双目视觉数字散斑相关测量系统同时测量了平板离面位移,并对所测量的位移最大值进行了分析处理及比较。结果表明,双目视觉数字散斑相关测量系统的物体离面位移分布云图与电子散斑干涉测量系统的结果基本相同,且两者位移均方根相差为2.76 m~3.56 m,相对误差为4.59%~7.60%。因此,当被测量物体的离面位移大于4 m时,双目视觉Q400测量系统精度可达到电子散斑干涉测量系统的精度。  相似文献   

5.
为了解决散斑干涉计量中亚波长位移测量的困难,相移技术被广泛使用,但相移技术有其固有缺点,应用非常麻烦。这里提出一种不同于已往相移技术的全新微小位移测量方法。即把灰度等级法和散斑干涉计量相结合以实现对亚波长位移或变形的测量。克服了散斑干涉计量中变形或位移小于半个波长不产生完整条纹时计量困难的缺点,论述了其测量原理并进行了实验。实验结果很好地证明了上述方法的可行性。为精密散斑干涉计量提供了一种更简单有效的方法。  相似文献   

6.
孙平  李兴龙  孙海滨  李峰 《光子学报》2014,43(9):912001
将涡旋光应用于电子散斑干涉,测量变形物体的离面位移.把传统的电子散斑干涉测量技术与液晶空间光调制器相结合,将所获得的涡旋光作为参考光或者物光进行变形测量.推导出物光为平面光、参考光为涡旋光,和参考光、物光均为涡旋光时物体变形后的干涉强度公式,模拟计算了变形后的干涉图样,分析了变形图样的特征.运用四步相移方法得到了物体的变形相位公式,通过解包裹得到了物体的变形相位.模拟计算得到的三维相位分布图与物体离面位移的变形相位理论值的三维分布图相吻合.模拟实验结果表明,涡旋光可以应用于物体的变形测量,为变形测量提供新的途径.  相似文献   

7.
电子散斑干涉位移场分离技术及其在三维测量中的应用   总被引:6,自引:3,他引:3  
孙平  张丽  陶春先 《光子学报》2005,34(7):1074-1077
提供了一种可将离面位移与面内位移分离的三维位移场测量方法.在双光束电子散斑干涉中增加参考光,使这一路参考光为两光束所共用.两束光各自独立地对变形物体进行测量,结合相移技术,可分别得到包含离面和面内位移信息的二幅位相图.只需简单的位相运算就能够将面内位移场与离面位移场分离.在竖直方向上,采用两光束对称照明被测物,直接测量面内位移竖直方向分量.本文将该技术应用到柴油机油泵测量上,得到了油泵的三维位移场.该技术为三维位移场的测量提供了一种新的有效途径,也为柴油机零部件的强度和刚度分析评价提供了新的方法.  相似文献   

8.
与传统测量方法相比,数字散斑相关法由于其目标特征单元网格划分的灵活性,能够更好地满足不同场合小角位移的测量需求。针对该方法亚像素小角位移测量的曲面拟合参数选择问题,研究了亚像素测量图像小角旋转前后的九点二次曲面拟合法,并根据计算机生成模拟散斑进行模拟实验分析,得到最佳误差效率优化条件下的曲面拟合法求解亚像素小角位移的最佳散斑尺寸3.5 pixel、计算窗口尺寸41×41 pixel和拟合窗口尺寸3×3 pixel。实验验证了上述测量参数的有效性,为进一步的曲面拟合法数字散斑成像角位移测量提供参考。  相似文献   

9.
王军  范华 《光子学报》1996,25(12):1115-1119
本文提出将相移技术应用于2-D面内位移场的分离,用单模光纤相移数字散斑干涉计量技术快速、定量地同时测量2-D面内位移场。  相似文献   

10.
载频调制大剪切电子散斑干涉系统   总被引:3,自引:0,他引:3       下载免费PDF全文
孙平  韩青  王晓凤 《应用光学》2006,27(5):380-384
大剪切电子散斑干涉技术不需要引入参考光,具有条纹质量好等特点。提出将干涉场的载频调制技术引入到大剪切电子散斑干涉中,可形成具有载频调制功能的新的电子散斑干涉系统。该系统具有对测量环境的隔振振动要求低,能方便定量求解物体的变形场等优点。首先讨论大剪切载频的调制机理,然后利用中心加载、周边固定的圆盘进行典型实验,设计了可用计算机控制且可对参考物进行精确偏转的步进电机系统,进而实现了对电子散斑干涉场的自动控制调制。最后,利用傅里叶变换法对调制条纹进行解调,解调出变形场的相位,并通过相位与位移的转换计算,得到精确的物体变形场。实验结果证明,该系统能够调制电子散斑干涉场,求解物体的位移场。  相似文献   

11.
The digital ultrasonic speckle phase-shifting method (USPM), which is introduced in this paper, can be applied to the measurement of small displacement that is smaller than speckle size at the test point compared to traditional ultrasonic speckle correlation method (USCM). Using USPM, a digital ultrasonic reference signal is introduced to interfere with the ultrasonic speckle signal, which is picked up at the test point on an object surface and is referred to as the object signal. As the phase of the reference signal is shifted several times using the software and then they superimpose with the object signal respectively, the phase of the object signal can be calculated according to the intensities of the superimposed signals. If the object surface moves a small distance, the phase variation of the object speckle can be detected by the same process. As a result, the displacement of the object surface can be measured. Based on the feature of ultrasonic speckles, inner surface displacement of an object can be measured using this proposed method. In this case, the effect of outer surface roughness to the measurement accuracy of USPM is examined experimentally. The experimental results show that the measurement is successful when the displacement is smaller than half of the speckle size at the test point and the roughness parameter Ra of the outer surface of the specimen is less than about 5.47 μm.  相似文献   

12.
李喜德  郑文 《光子学报》1992,21(3):222-230
物体表面在一束相干光照明下的空间散斑位移场分布对于分析物体表面状态及位移、变形等信息具有重要意义。本文应用散斑场的相关方法与散斑相移技术得到了物体表面位移及变形参量与自由空间衍射场散斑位移的一般关系,给出了这种一般关系的简化与分离条件,并对物体平移、转动及热加载条件下的蜂窝结构进行了实验。  相似文献   

13.
一种可用于离面位移测量的光路的优化设计   总被引:2,自引:1,他引:2  
为了实现对复杂三维物体表面轮廓、小空间内物体的纵向位移或振动等测量,有必要研制高分辨力、非接触的光学检测系统。由于激光多普勒技术具有动态响应快、线性度好、非接触、测量精度高等特点而优先被用于复杂三维物体离面位移的测量。但是物体表面散射光的多普勒信号非常微弱,因此解决信号的强度、信噪比则是实现测量的关键。研究了激光多普勒技术及散射光相位的无规变化的统计规律,设计出一种空间分辨力很高的参考光路,将它用于固体离面位移测量效果很好,其相对误差为0.3%。  相似文献   

14.
A new speckle measurement technique called temporal speckle pattern interferometry or time sequential speckle pattern interferometry has been developed recently. Its principle is that by capturing the temporal speckle patterns related to the object deformation or displacement, the whole-field displacement, the amplitude of the vibrating object and the shape of the tested object can be calculated through speckle intensity fluctuation scanning technique or Fourier-transforming method. In this paper, we combine the analytical and numerical methods to simulate the properties of the time demodulation in temporal speckle patterns interferometry techniques. The performance of three kinds of temporal phase sequences, power, exponential and harmonic phase sequences, are studied with the parameters of temporal speckle intensity fluctuation, the value of the spatial phase term, optical integral time of the recording camera and the initial phase of the temporal speckle intensities. The results indicate that the normalized value and period change of the instantaneous intensity are nearly coincident with that of the integral intensity for the harmonic temporal phase sequences and are different for the power and exponential temporal phase sequences.  相似文献   

15.
16.
With the aid of the recently reported technique of adding up phase images modulo 2π that correspond to stepwise applied load increments, the fringe density that can be achieved in electronic speckle pattern interferometry (ESPI) has been substantially improved. This technique also allows the measurement of much larger deformations than were hitherto possible with ESPI. The analytical power of the method is demonstrated in the measurement of high local displacement gradients in carbon fibre-reinforced plastics (CFRPs). In-plane and out-of-plane displacement field measurements, performed with one single optical instrument, are compared with finite-element models. This paper reports how the technique is used to detect and quantify damage in fatigued CFRP laminates via its effect on the surface displacement field. Moreover, the measured displacement fields are used to validate a finite-element damage model. The correctness of the delamination measurement is verified with the aid of ultrasonic C-scan reference results.  相似文献   

17.
Quality assessment of speckle patterns for digital image correlation   总被引:6,自引:1,他引:5  
Digital image correlation (DIC) is an optical–numerical full-field displacement measuring technique, which is nowadays widely used in the domain of experimental mechanics. The technique is based on a comparison between pictures taken during loading of an object. For an optimal use of the method, the object of interest has to be covered with painted speckles. In the present paper, a comparison is made between three different speckle patterns originated by the same reference speckle pattern. A method is presented for the determination of the speckle size distribution of the speckle patterns, using image morphology. The images of the speckle patterns are numerically deformed based on a finite element simulation. Subsequently, the displacements are measured with DIC-software and compared to the imposed ones. It is shown that the size of the speckles combined with the size of the used pixel subset clearly influences the accuracy of the measured displacements.  相似文献   

18.
An optical heterodyne system for measuring a vibration phase, which uses a frequency-shifted and phase-modulated reference beam, is proposed. This system is applicable to a rough surface. By using the light scattered by a standard vibrating point on the object surface as the reference beam (local reference beam technique), effects of the uniform displacement of the object can be eliminated, i.e. only the vibration component is detected with no sensitivity to the uniform displacement. Preliminary experiments demonstrate the validity of the theory.  相似文献   

19.
严跃 《光学学报》1989,9(3):36-240
本文描述了一种新的散斑干涉仪,它可以同时对表面应变物体的面内位移、离面位移、位移梯度和莫尔曲率进行测量;由于利用了取向滤波方法,在滤波系统输出平面同时得到了与这些参数对应的散斑条纹.还利用散斑空间运动规律较好地解释了散斑干涉与散斑剪切干涉之间的关系.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号