Solvation in pure liquids: what can be learned from the use of pairs of indicators?

The solvation of six solvatochromic probes in a large number of solvents (33-68) was examined at 25 degrees C. The probes employed were the following: 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl) phenolate (RB); 4-[(E)2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePM; 1-methylquinolinium-8-olate, QB; 2-bromo-4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr, 2,6-dichloro-4-(2,4,6-triphenyl pyridinium-1-yl) phenolate (WB); and 2,6-dibromo-4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr(2), respectively. Of these, MePMBr is a novel compound. They can be grouped in three pairs, each with similar pK(a) in water but with different molecular properties, for example, lipophilicity and dipole moment. These pairs are formed by RB and MePM; QB and MePMBr; WB and MePMBr(2), respectively. Theoretical calculations were carried out in order to calculate their physicochemical properties including bond lengths, dihedral angles, dipole moments, and wavelength of absorption of the intramolecular charge-transfer band in four solvents, water, methanol, acetone, and DMSO, respectively. The data calculated were in excellent agreement with available experimental data, for example, bond length and dihedral angles. This gives credence to the use of the calculated properties in explaining the solvatochromic behaviors observed. The dependence of an empirical solvent polarity scale E(T)(probe) in kcal/mol on the physicochemical properties of the solvent (acidity, basicity, and dipolarity/polarizability) and those of the probes (pK(a), and dipole moment) was analyzed by using known multiparameter solvation equations. For each pair of probes, values of E(T)(probe) (for example, E(T)(MePM) versus E(T)(RB)) were found to be linearly correlated with correlation coefficients, r, between 0.9548 and 0.9860. For the mercyanine series, the values of E(T)(probe) also correlated linearly, with (r) of 0.9772 (MePMBr versus MePM) and 0.9919 (MePMBr(2) versus MePM). The response of each pair of probes (of similar pK(a)) to solvent acidity is the same, provided that solute-solvent hydrogen-bonding is not seriously affected by steric crowding (as in case of RB). We show, for the first time, that the response to solvent dipolarity/polarizability is linearly correlated to the dipole moment of the probes. The successive introduction of bromine atoms in MePM (to give MePMBr, then MePMBr(2)) leads to the following linear decrease: pK(a) in water, length of the phenolate oxygen-carbon bond, length of the central ethylenic bond, susceptibility to solvent acidity, and susceptibility to solvent dipolarity/polarizability. Thus studying the solvation of probes whose molecular structures are varied systematically produces a wealth of information on the effect of solute structure on its solvation. The results of solvation of the present probes were employed in order to test the goodness of fit of two independent sets of solvent solvatochromic parameters.     

Thermosolvatochromism of betaine dyes revisited: theoretical calculations of the concentrations of alcohol-water hydrogen-bonded species and application to solvation in aqueous alcohols

Solvatochromic data of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (RB) in aqueous methanol, 1-propanol, 2-propanol, and 2-methyl-2-propanol at 25 degrees C were recalculated by employing a recently introduced model that explicitly considers the presence of 1:1 alcohol-water hydrogen-bonded species, ROH-W, in bulk solution and their exchange equilibria with water and alcohol in the probe solvation microsphere. The thermosolvatochromic behavior of RB in aqueous ethanol was measured in the temperature range from 10 to 60 degrees C; the results thus obtained were treated according to the same model. All calculations require reliable values of Kdissoc, the dissociation constant of the ROH-W species. This was previously calculated from the dependence of the density of the binary solvent mixture on its composition. Through the use of iteration, the volume of the hydrogen-bonded species, VROH-W, and Kdissoc are obtained simultaneously from the same set of experimental data. This approach may be potentially problematic because Kdissoc and VROH-W are highly correlated. Therefore, we introduced the following approach: (i) VROH-W was obtained from ab initio calculations, (ii) these volumes were corrected for the nonideal behavior of the binary solvent mixtures at different temperatures, (iii) corrected VROH-W values were employed as a constant in the equation used to calculate Kdissoc (from density vs binary solvent mixture composition). VROH-W calculated by the COSMO-RS solvation model fitted the density data better than those calculated by the IEFPCM model. In all aqueous alcohols, solvation by ROH-W is favored over that by the two precursor solvents. In aqueous ethanol, a temperature increase resulted in a gradual desolvation of RB, due to a decrease in the hydrogen-bonding of both components of the mixture. The microscopic polarities of ROH-W are much closer to those of the precursor alcohols.     

Solvation in binary mixtures of water and polar aprotic solvents: theoretical calculations of the concentrations of solvent-water hydrogen-bonded species and application to thermosolvatochromism of polarity probes

Thermo-solvatochromism of two polarity probes, 2,6-diphenyl-4-(2,4,6-triphenyl- pyridinium-1-yl)phenolate, RB, and 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, WB, in aqueous acetone, Me2CO, and aqueous dimethylsulfoxide, DMSO, has been studied. The data obtained have been analyzed according to a recently introduced solvation model that explicitly considers the presence of 1:1 organic solvent-water hydrogen-bonded species, S-W, in the bulk binary mixture and its exchange equilibria with (S) and (W) in the solvation shell of the probe. Calculations require reliable values of Kdissoc, the dissociation constant of S-W. Previously, this has been calculated from the dependence of the densities of binary solvent mixtures on their composition. Using iteration, the volume of the hydrogen-bonded species, VS-W, and Kdissoc were obtained simultaneously from the same set of experimental data. This approach may be potentially suspect because Kdissoc, and VS-W are highly correlated. Therefore, we extended a recently introduced approach for the calculation of Valcohol-W to binary mixtures of water with acetone, acetonitrile, N,N-dimethylformamide, DMSO, and pyridine. This approach includes: Determination of VS-W from ab initio calculations by the COSMO solvation model; correction of these volumes for the nonideal behavior of the binary solvent mixtures at different temperatures; use of corrected VS-W as a constant (not an adjustable parameter) in the equation that is employed to calculate Kdissoc (from density versus binary solvent composition). Solvation of RB and WB by Me2CO-W showed different behavior from that of aqueous DMSO. Thus, water is able to displace Me2CO more efficiently than DMSO from the probe solvation shell. Me2CO-W and DMSO-W displace their corresponding precursor solvents; this is more efficient for the former case because the strong DMSO-W interactions attenuate the solvation capacity of this species. Temperature increase resulted in desolvation of both probes, due to concomitant decrease of the structures of the component solvents.     

Probing of chemically modified silica surfaces by solvatochromic pyridinium N-phenolate betaine indicators

The state of betaine indicators, 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate and 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl)phenolate, on the surfaces of aminosilicas, silica modified with aminodiphosphonic acid, and unmodified silica gel is studied with diffuse reflectance spectroscopy. The normalized polarity parameters are calculated for the surface layers of the sorbents. It is revealed that regions with substantially different polarity and acidity are present on the surface of chemically modified silicas.     

Thermosolvatochromism of merocyanine polarity indicators in pure and aqueous solvents: relevance of solvent lipophilicity

The following novel solvatochromic probes were synthesized: 2,6-dibromo-4-[(E)-2-(1-alkylpyridinium-4-yl)ethenyl] phenolate, where the alkyl groups are methyl, n-butyl, n-hexyl, and n-octyl, respectively. Solvatochromism of three of these probes (C(1), C(4), and C(8)) was studied in 36 protic and aprotic solvents. A modified linear solvation energy relationship has been applied to the data obtained at 25 degrees C. Correlation of (empirical) polarities with other solvent properties showed more dependence on lipophilicity than on basicity. A similar conclusion has been reached for a series of other solvatochromic indicators. Exceptions are those that carry acidic hydrogens, being biased toward solvent basicity. Thermosolvatochromism has been studied in mixtures of water with methanol, 1-propanol, acetonitrile, and DMSO. Thermosolvatochromic data have been treated according to a model that explicitly considers the presence in bulk solution of three "species": water, organic component, and solvent-water hydrogen-bonded aggregate. Solvation by the latter is favored over solvation by either of the two precursor solvents (aqueous DMSO is an exception). Temperature increase resulted in desolvation of the probes, due to concomitant decrease of the structures of the component solvents. The above-mentioned modified solvation equation has been successfully applied to solvatochromism in aqueous methanol and aqueous 1-propanol.     

Absorption spectral band width of charge transfer transition of E(T)(30) dye in homogeneous and heterogeneous media

Solvation characteristics in homogeneous and heterogeneous media have been probed by monitoring the band width of ICT band of 2,6-di-phenyl-4(2,4,6-triphenyl-1-pyridino) phenolate, the indicator solute for E(T)(30) scale, in pure, mixed binary solvents and aqueous micellar solution. Non-ideal solvation behaviour is observed in all the binary solvent mixtures. Index of preferential solvation has been calculated as a function of solvent composition. Study in micellar media indicates that the dye is located at the micelle-water interface. The effects of variation of micelle concentration, temperature and electrolyte concentration have also been studies.     

Preferential Solvation in Aqueous–Organic Mixed Solvents Using Solvatochromic Indicators

Solvatochromism of the twisted intramolecular charge-transfer (TICT) fluorescence of 4-(N,N-dimethylamino)benzonitrile (DMABN) in pure water, methanol, ethanol, 1-propanol, 2-propanol, acetone, acetonitrile, and in the corresponding aqueous–organic binary mixed solvents was systematically studied and an empirical solvent polarity scale (F _B) based on the DMABN solvatochromism was defined. The F _B parameters of the explored binary mixed solvents as a function of solvent composition were analyzed by a stepwise solvent-exchange (SSE) model to clarify the preferential solvation (PS) of the probe dye in these binary mixed solvents. Solvation diagrams toward DMABN in the mixed solvents, i.e., the local solvent composition in the solvation shell of DMABN molecules was depicted as a function of bulk solvent composition to visualize the PS in these mixed solvents. For comparison, a similar PS analysis was applied to the solvatochromism of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1- yl)phenolate (ET-30) and pyrene (Py) in these mixed solvents; the responsive PS pattern of the mixed solvents toward the specific indicator dye of DMABN, ET-30, and Py was then discussed in terms of the chemical properties of the probe dye, the properties of the mixed solvents, and the solute–solvent and solvent–solvent interactions.     

Use of a solvatochromic probe for study of solvation in ternary solvent mixture

Solvation characteristics of 2,6-diphenyl-4-(2,4,6-triphenyl-1-pyridino)phenolate in completely miscible ternary solvent mixtures (viz., methanol + acetone + water, methanol + acetone + benzene, and methanol + chloroform + benzene) have been studied by using an electronic spectroscopic procedure. The transition energy (E) corresponding to the charge-transfer band maximum of the solute in a ternary solvent mixture differs significantly from the average E-values in the component solvents weighted by the mole fraction of the solvents. A two-phase model of solvation has been invoked to explain the results. The excess or deficit of solvent components in the local region of the solute molecule over that in the bulk has been estimated using the knowledge of solvation in binary solvent mixtures.     

The Negative Solvatochromism of Reichardt‘s Dye B30 – A Complementary Study

The UV/Vis spectra of a hypothetical negative solvatochromic dye in a solvent are theoretically calculated assuming the classical damped harmonic oscillator model and the Lorentz-Lorenz relation. For the simulations, the oscillator strength of the solvent was varied, while for the solute all oscillator parameters were kept constant. As a result, a simple change of the oscillator strength of the solute can explain the redshift and intensity increase of the UV/Vis band of the solute. Simulated results are compared with measured UV/Vis spectroscopic data of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl) phenolate B30 (Reichardt‘s dye) Significant correlations of the absorption energy (1/λ_max) with the molar absorption coefficient ϵ as function of solvent polarity are demonstrated for several derivatives of B30 . The approach presented is only applicable to negative solvatochromism. Therefore, while the approach is vital to fully understand solvatochromism, it needs to be complemented by other approaches, e. g., to describe the changes of the chemical interactions based on the nature of the solvent, to explain all its various aspects.     

Kinetic and spectroscopic investigations of aqueous micelles of cationic surfactants

The aqueous micellar solutions of monocationic surfactants N-hexadecyl-N,N,N-trimethylammonium bromide (CTABr), N-hexadecyl-N,N,N-trimethylammonium nitrate (CTANO₃), N,N,N-tributyl-N-hexadecylammonium bromide (CTBABr) and gemini surfactants 1,4-bis(N-hexadecyl-N,N-dimethylammonium)ethane dibromide (C-E-C2Br), 1,4-bis(N-hexadecyl-N,N-dimethylammonium)propane dibromide (C-P-C2Br), and 1,4-bis(N-hexadecyl-N,N-dimethylammonium)butane dibromide (C-B-C2Br) were studied with a solvatochromic probe, 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate, better known as Reichard’s ET-30 dye. The local polarity at the probe site (E_T) was calculated from the wavelength maximum of the lowest-energy intramolecular charge-transfer ϖ-ϖ* absorption band of ET-30. The results were compared with a kinetic investigation of the cyclization of 2-(3-bromopropyloxy)phenoxide (PhBr7) in micelles; this reaction is a model for S_N2 reactions and it depends on medium polarity.     

Solute-solvent and solvent-solvent interactions in the preferential solvation of 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide in 24 binary solvent mixtures

The molar transition energy (E(T)) polarity values for the dye 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide were collected in binary mixtures comprising a hydrogen-bond accepting (HBA) solvent (acetone, acetonitrile, dimethyl sulfoxide (DMSO), and N,N-dimethylformamide (DMF)) and a hydrogen-bond donating (HBD) solvent (water, methanol, ethanol, propan-2-ol, and butan-1-ol). Data referring to mixtures of water with alcohols were also analyzed. These data were used in the study of the preferential solvation of the probe, in terms of both solute-solvent and solvent-solvent interactions. These latter interactions are of importance in explaining the synergistic behavior observed for many mixed solvent systems. All data were successfully fitted to a model based on solvent-exchange equilibria. The E(T) values of the dye dissolved in the solvents show that the position of the solvatochromic absorption band of the dye is dependent on the medium polarity. The solvation of the dye in HBA solvents occurs with a very important contribution from ion-dipole interactions. In HBD solvents, the hydrogen bonding between the dimethylamino group in the dye and the OH group in the solvent plays an important role in the solvation of the dye. The interaction of the hydroxylic solvent with the other component in the mixture can lead to the formation of hydrogen-bonded complexes, which solvate the dye using a lower polar moiety, i.e. alkyl groups in the solvents. The dye has a hydrophobic nature and a dimethylamino group with a minor capability for hydrogen bonding with the medium in comparison with the phenolate group present in Reichardt's pyridiniophenolate. Thus, the probe is able to detect solvent-solvent interactions, which are implicit to the observed synergistic behavior.     

Merocyanine solvatochromic dyes in the study of synergistic effects in mixtures of chloroform with hydrogen-bond accepting solvents

The molar transition energy (E(T)) polarity values for the solvatochromic probes 2,6-diphenyl-4-(2,4,6-triphenylpyridinium)phenolate (1), 4[(1-methyl-4-(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2), and 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide (3) were collected in binary mixtures comprising chloroform and a hydrogen-bond accepting (HBA) solvent [dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), acetone or acetonitrile], aiming to investigate the ability of the chlorinated component to act as hydrogen-bond donating (HBD) solvent. Plots of E(T) as a function of X(2), the mole fraction of chloroform, were obtained and the data were analysed to investigate the preferential solvation (PS) of each probe in terms of both solute-solvent and solvent-solvent interactions. For dyes 1 and 2 a strong synergistic behavior was observed for all mixtures studied, indicating that the dyes are preferentially solvated by complexes formed through hydrogen bonding between chloroform and the HBA component in the mixtures. A study of 1 in deuterated chloroform with an HBA component (DMF and DMA) demonstrated that while almost no differences occur with the DMF mixtures, the presence of deuterated chloroform in its mixtures with DMA increases the synergistic effect, suggesting that it interacts more strongly with DMA, making its mixtures more polar. These data were successfully fitted to a model based on solvent-exchange equilibria. The features of the mixtures with dye 3 revealed a very different profile in comparison with the other two dyes, which suggests that in mixtures containing chloroform, the microenvironment of the dye seems to be important in determining the contribution of the structure resonances responsible for the stability of the dye.     

Solvent effects in the interaction of methyl-beta-cyclodextrin with solvatochromic merocyanine dyes

The UV-vis spectroscopic behavior of dyes: 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (1) and 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2) was investigated in solutions of methyl- beta-cyclodextrin (methyl-beta-CyD), using water, methanol, ethanol, propan-2-ol, butan-1-ol, acetone, acetonitrile, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N,N-dimethylacetamide (DMA), chloroform and dichloromethane as solvents. In aqueous solutions of dye (2) the addition of M-beta-CD leads to a bathochromic shift (of the maximum absorption), showing that the probe was transferred to a microenvironment of lower polarity and suggesting the formation of a 1 : 1 dye (2) : CyD inclusion complex, with a binding constant of 128.5 +/- 3.5 dm(3) mol(-1). Data for dye 2 in alcohols showed hypsochromic shifts, which increased in the following order: methanol < ethanol < propan-2-ol < butan-1-ol. These observations appear to reflect dye-solvent interactions through hydrogen bonding. If dye-solvent interactions are strong, the CyD-dye interactions are consequently weak, but the latter increase in importance when the dye-solvent interaction becomes weaker. With hydrogen-bond accepting solvents, data for both dyes showed clearly increasing hypsochromic shifts following the order: DMSO < DMA < DMF < acetone < acetonitrile. This order is exactly the inverse of the increasing order of basicity of the medium. This indicates that the dominant factor for the observed effects in these solvents is the solvent-CyD interaction through hydrogen bonding involving the hydroxyl groups of the CyD and the basic groups of the solvents. These interactions diminish in intensity if the basic character of the medium is reduced, increasing the capability of the dye to interact with the CyD using its phenoxide donor moiety. The largest hypsochromic shifts were obtained in chloroform (66.0 nm) and dichloromethane (67.5 nm) with dye after addition of methyl-beta-CyD. In these specific situations, solvents display weak basic and acid properties, that enhanced CyD-dye interactions to such an extent that association complexes formed through hydrogen bonding could be detected (K11) values of 24.8 +/- 4.9 dm3 mol(-1) in dichloromethane and 66.1 +/- 8.0 dm3 mol(-1) in chloroform).     

UV-vis spectroscopic study of interaction of metal ions with the E(T)(30) dye involving micellar media

Interaction between 3d-transition metal ions (Mn2+, Fe2+, Fe3+, Co2+, Ni2+, Cu2+ and Zn2+) and the E(T)(30) dye, 2,6-diphenyl-4-(2,4,6-triphenyl 1-pyridino)phenolate in aqueous medium have been studied by distributing the dye between the aqueous and micellar phase formed by cationic surfactant cetyltrimethylammonium bromide(CTAB). Values of equilibrium constant K for the dye-metal ion interaction and the partition coefficient of the dye between the micellar and the aqueous phase have been determined. K values show a systematic correlation with ionic potential of metal ions.     

Interaction of protonated merocyanine dyes with amines in organic solvents

2,6-Diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (1a) and 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2a) were protonated in organic solvents (dichloromethane, acetonitrile, and DMSO) to form 1b and 2b, respectively. The appearance of the solvatochromic bands of 1a and 2a was studied UV-vis spectrophotometrically by deprotonation of 1b and 2b in solution in the presence of the following amines: aniline (AN), N-methylaniline (NMAN), N,N-dimethylaniline (NDAN), n-butylamine (BA), diethylamine (DEA), and triethylamine (TEA). Titrations of 1b and 2b with the amines were carried out and the binding constants were determined from the titration curves in each solvent, using a mathematical model adapted from the literature which considers the simultaneous participation of two dye: amine stoichiometries, 1:1 and 1:2. The data obtained showed the following base order for the two compounds in DMSO: BA>DEA>TEA, while aromatic amines did not cause any effect. In dichloromethane, the following base order for 1b was verified: TEA>DEA>BA?NDAN, while for 2b the order was: TEA>DEA>BA, suggesting that 1b is more acidic than 2b. The data in acetonitrile indicated for 1b and 2b the following order for the amines: DEA>TEA>BA. The diversity of the experimental data were explained based on a model that considers the level of interaction of the protonated dyes with the amines to be dependent on three aspects: (a) the basicity of the amine, which varies according to their molecular structure and the solvent in which it is dissolved, (b) the molecular structure of the dye, and (c) the solvent used to study the system.     

Convenient synthesis of tridentate 2,6-di(pyrazol-1-yl)-4-carboxypyridine and tetradentate 6,6′-di(pyrazol-1-yl)-4,4′-dicarboxy-2,2′-bipyridine ligands

Citrazinic acid is used as a convenient starting material for both tridentate 2,6-di(pyrazol-1-yl)-pyridine and tetradentate 6,6′-di(pyrazol-1-yl)-2,2′-bipyridine ligands containing carboxylic groups useful for further anchoring of sensitizer on TiO₂ for dye-sensitized solar cells (DSCs). Using 2,6-dichloro-4-carboxypyridine, the synthesis of the terdentate ligands was improved compared to previously used 2,6-dibromo-4-carboxypyridine or 2,6-dichloro-4-ethylcarboxylate pyridine. Controlling the reaction conditions, it is possible to efficiently obtain the monosubstituted 2-chloro-6-pyrazol-1-yl-4-carboxypyridine, a key intermediate for the preparation of tetradentate 6,6′-di(pyrazol-1-yl)-4,4′-dicarboxy-2,2′-bipyridine ligand.     

Cellulose Dissolution in Mixtures of Ionic Liquids and Dimethyl Sulfoxide: A Quantitative Assessment of the Relative Importance of Temperature and Composition of the Binary Solvent

We studied the dissolution of microcrystalline cellulose (MCC) in binary mixtures of dimethyl sulfoxide (DMSO) and the ionic liquids: allylbenzyldimethylammonium acetate; 1-(2-methoxyethyl)-3-methylimidazolium acetate; 1,8-diazabicyclo [5.4.0]undec-7-ene-8-ium acetate; tetramethylguanidinium acetate. Using chemometrics, we determined the dependence of the mass fraction (in %) of dissolved cellulose (MCC-m%) on the temperature, T = 40, 60, and 80 °C, and the mole fraction of DMSO, χ_DMSO = 0.4, 0.6, and 0.8. We derived equations that quantified the dependence of MCC-m% on T and χ_DMSO. Cellulose dissolution increased as a function of increasing both variables; the contribution of χ_DMSO was larger than that of T in some cases. Solvent empirical polarity was qualitatively employed to rationalize the cellulose dissolution efficiency of the solvent. Using the solvatochromic probe 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (WB), we calculated the empirical polarity E_T(WB) of cellobiose (a model for MCC) in ionic liquid (IL)–DMSO mixtures. The E_T(WB) correlated perfectly with T (fixed χ_DMSO) and with χ_DMSO (fixed T). These results show that there is ground for using medium empirical polarity to assess cellulose dissolution efficiency. We calculated values of MCC-m% under conditions other than those employed to generate the statistical model and determined the corresponding MCC-m% experimentally. The excellent agreement between both values shows the robustness of the statistical model and the usefulness of our approach to predict cellulose dissolution, thus saving time, labor, and material.     

Reactions of 3,5-dibromo-1-(thiiran-2-ylmethyl)-1,2,4-triazole with NH-azoles

Reactions of 3,5-dibromo-1-(thiiran-2-ylmethyl)-1,2,4-triazole with 3,5-dimethylpyrazole, 1,3-dimethyl-3,7-dihydropurine-2,6-dione, 3,5-dibromo-1,2,4-triazole, 2,4,5-tribromoimidazole, and 2-chlorobenzimidazole lead to the formation of 5-azolylmethyl-2-bromo-5,6-dihydrothiazolo[3,2-b]-1,2,4-triazoles. In the case of 8-bromo-1,3-dimethyl-3,7-dihydropurine-2,6-dione the intermediate thiolate anion undergoes cyclization into 7-[(3,5-dibromo-1,2,4-triazol-1-yl)methyl]-1,3-dimethyl-6,7-dihydrothiazolo[2,3-f]purine-2,4(1H,3H)-dione. The structure of reaction products depends on the relative rate of substitution of leaving groups in the reagents.     

Probing the dependence of the properties of cellulose acetates and their films on the degree of biopolymer substitution: use of solvatochromic indicators and thermal analysis

Although cellulose acetates, CAs, are extensively employed there is scant information about the systematic dependence of their properties on their degree of substitution, DS; this is the subject of the present work. Nine CAs samples, DS from 0.83 to 3.0 were synthesized; their films were prepared. The following solvatochromic probes have been employed in order to determine the empirical polarity, E _T(33); “acidity, α”; “basicity, β”, and “dipolarity/polarizability, π*” of the casted films: 2,6-dichloro-4-(2,4,6-triphenyl-pyridinium-1-yl) phenolate, WB; 4-nitroaniline; 4-nitroanisole; 4-nitro-N,N-dimethylaniline; 2,6-diphenyl-4-(2,4,6-triphenyl-pyridinium-1-yl)phenolate, RB. Additionally, two systems, ethanol plus ethyl acetate (EtOH–EtAc), and cellulose plus cellulose triacetate, CTA, were employed as models for CAs of different DS. Regarding the model systems, the following was observed: (i) For EtOH–EtAc, the dependence of all solvatochromic parameters on the “equivalent-DS” of the binary mixture was non-linear because of preferential solvation; (ii) The dependence of E _T(33) on equivalent DS of the cellulose–CTA films is linear, but the slope is smaller than that of the corresponding plot for CAs. This is attributed to the more efficient hydrogen bonding in the model system, a conclusion corroborated by IR measurements. The dependence of solvatochromic parameters of CAs on their DS is described by the simple equations; a consequence of the substitution of the OH by the ester group. The thermal properties of bulk CAs samples were investigated by DSC and TGA; their dependence on DS is described by simple equations. The relevance of these data to the processing and applications of CAs is briefly discussed.     

Employing perichromism for probing the properties of carboxymethyl cellulose films: an expedient, accurate method for the determination of the degree of substitution of the biopolymer derivative

The properties of films of carboxymethyl cellulose, CMC, of different degree of substitution, DS, have been examined by the use of perichromic indicators (probes). The film properties that have been determined are: empirical polarity, E_T(33); “acidity”, α; “basicity”, β; and dipolarity/polarizability, π*. This has been achieved by employing the following perichromic probes: 4-nitroaniline, 4-nitroanisole, 4-nitro-N,N-dimethylaniline, and 2,6-dichloro-4-(2,4,6-triphenyl-pyridinium-1-yl)phenolate, WB. The correlations between both E_T(33)- or π* and DS were found to be linear; that between β and DS is a second order polynomial; no obvious correlation was found between α and DS. The polarities of CMC films are in the range of those of butyl alcohols. As models for CMC, we have employed cellulose plus CMC of high DS; oxidized cellulose with degree of oxidation = 0.5; sodium glucuronate. The former model behaved akin to CMC, but the plots of the perichromic properties versus DS showed different slopes/intercepts. FTIR data and molecular dynamics simulations on the solvation of WB have shown that this difference can be traced to more efficient hydrogen bonding between the film of the model and the probe. This affects the intra-molecular charge-transfer energy of the latter, leading to different responses to the variation of DS. Based on the excellent linear correlation between E_T(33) and DS, for CMC from different origins, we suggest that perichromism is a simple, accurate, and expedient alternative for the determination of DS of the biopolymer derivative.