Immobilization of Pd Catalysts on Mesoporous Silica for Amine- and Copper-Free Sonogashira Coupling Reactions

Immobilization of catalysts on solid supports is a promising approach to combine the advantages of heterogeneous and homogeneous catalysts. Pd(PPh₃)₂Cl₂, known as an extremely active homogeneous catalyst for the Sonogashira coupling reaction, has been immobilized on high-surface-area MCF (mesocellular foams)–type mesoporous silica powder modified with 3-aminopropyltriethoxysilane and subsequently with diphenylphosphine. The functionalized MCF-type silica and supported catalysts have been characterized by x-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR), elemental analysis, nitrogen sorption porosimetry, and scanning electron microscopy (SEM). Such supported Pd catalysts have proven to be useful recyclable reagents for copper- and amine-free Sonogashira coupling reactions of haloaromatic compounds with terminal alkynes.     

The effect of framework functionality on the catalytic activation of supported Pd nanoparticles in the Mizoroki–Heck coupling reaction

Palladium nanoparticles (Pd-NPs) were supported on functional and nonfunctional Co-coordination polymers (Pd/CoBDCNH₂ and Pd/CoBDC). Advanced analytical techniques revealed that Pd-NPs are supported on the external surface of the polymer framework and the functionalized framework possesses effective influence to prevent Pd-NP aggregation. Supported Pd-NPs were effectively applied as heterogeneous recyclable catalysts in the Mizoroki–Heck C–C cross coupling reactions of iodobenzene and either aromatic or aliphatic terminal alkenes. Catalytic results exhibited that highly dispersed Pd-NPs with low loading (1%) on the functional polymer (Pd/CoBDCNH₂) are more effective than aggregated Pd-NPs with high loading (9%) on the nonfunctional polymer (Pd/CoBDC). Both catalysts can simultaneously provide high activity and selectivity to E-coupled products, high efficiency in low amounts, easy separation of heterogeneous catalyst and appropriate performance in the recycling reaction without addition of a reducing agent.     

Novel synthesis of 3-carboxamidolactam derivatives via palladium-catalysed aminocarbonylation

Aminocarbonylation of alkenyl and (hetero)aryl iodides using medium-sized 3-aminolactams as N-nucleophiles was carried out in the presence of in situ palladium(0) catalysts. While the iodoalkenes were converted to the corresponding carboxamide under mild reaction condition (1?bar of CO, 50?°C) by using Pd(OAc)₂/PPh₃ catalysts, the iodobenzene shown decreased reactivity (39% conversion after 2 days) under the similar reaction conditions in the presence of 3-aminoazepan-2-one. The reactivity of iodobenzene and other iodo(hetero)aromatic substrates was increased with 3-aminoazepan-2-one under high (40?bar) carbon monoxide pressure, but the chemoselectivity was shifted towards the 2-ketocarboxamides formed via double carbon monoxide insertion (except 2-iodopyridine). Changing triphenylphosphine to Xantphos, the expected carboxamides were chemoselectively formed in all cases when iodo(hetero)aryl substrates were used in the presence of all of the three 3-aminolactams under mild reaction conditions. The products synthesized in the reactions mentioned above were isolated in moderate to high yields.     

The Effect of Metal‐Ligand Affinity on Fe3O4_Supported Co–Rh Catalysts for Dicyclopentadiene Hydroformylation

The catalytic performances of Co‐Rh/Fe₃O₄ catalysts modified with phosphine ligands (PPh₃) and its analogues on dicyclopentadiene hydroformylation were evaluated. Among these catalysts, Co‐Rh/Fe₃O₄ modified with tris(p‐trifluoromethylphenyl)phosphine was determined to be effective for monoformyltricyclodecanes production, whereas Co‐Rh/Fe₃O₄ modified with PPh₃ or tri‐p‐tolylphosphine was effective for the diformyltricyclodecanes production. To investigate the ligand effects, the complex catalyst system (Co‐Rh/Fe₃O₄ and phosphine ligand) was subjected to pretreatment with syngas and then characterized by thermogravimetry and differential thermal analysis (TG‐DTA). It was determined that the threshold decomposition temperature reflected the corresponding Rh‐phosphine interaction strength, affecting the catalytic selectivity toward different products. A weak Rh‐phosphine interaction was desirable to produce monoformyltricyclodecanes with fast reaction kinetics, whereas a strong Rh‐phosphine complex was required for the synthesis of diformyltricyclodecanes. In addition to the selectivity rule shown in the PPh₃ series, experiments with other ligands also demonstrated similar selectivity trends.     

Periodic Mesoporous Organosilicas: A Type of Hybrid Support for Water‐Mediated Reactions

Hybrid mesoporous periodic organosilicas (Ph‐PMOs) with phenylene moieties embedded inside the silica matrix were used as a heterogeneous catalyst for the Ullmann coupling reaction in water. XRD, N₂ sorption, TEM, and solid‐state NMR spectroscopy reveal that mesoporous Ph‐PMO supports and Pd/Ph‐PMO catalysts have highly ordered 2D hexagonal mesostructures and covalently bonded organic–inorganic (all Si atoms bonded with carbon) hybrid frameworks. In the Ullmann coupling reaction of iodobenzene in water, the yield of biphenyl was 94 %, 34 %, 74 % and for palladium‐supported Ph‐PMO, pure silica (MCM‐41), and phenyl‐group‐modified Ph‐MCM‐41 catalysts, respectively. The selectivity toward biphenyl reached 91 % for the coupling of boromobenzene on the Pd/Ph‐PMO catalyst. This value is much higher than that for Pd/Ph‐MCM‐41 (19 %) and Pd/MCM‐41 (0 %), although the conversion of bromobenzene for these two catalysts is similar to that for Pd/Ph‐PMO. The large difference in selectivity can be attributed to surface hydrophobicity, which was evaluated by the adsorption isotherms of water and toluene. Ph‐PMO has the most hydrophobic surface, and in turn selectively adsorbs the reactant haloaryls from aqueous solution. Water transfer inside the mesochannels is thus restricted, and the coupling reaction of bromobenzene is improved.     

Cu(I) metal organic framework catalyzed C–C and C–N coupling reactions

DABCO (1,4-diazabicyclo[2.2.2]octane) based Cu(I) metal organic framework (here after represented as Cu(I)-MOF) catalyzed Sonogashira cross-coupling reaction of iodobenzene and phenylacetylene was conducted smoothly to afford diphenylacetylene in excellent yield under N₂ atmosphere. For comparative study, piperidine based Cu(I) clusters were also investigated. Among these catalysts, Cu(I)-MOF exhibited higher activity with good selectivity for the C–C cross-coupled product. Cu(I) catalysts investigated in this study exhibited similar activity in the C–C homo-coupling reaction of phenylacetylene in O₂ atmosphere. Application of these catalysts was extended in the C–N coupling reactions between phenylboronic acid and aromatic/aliphatic/heterocyclic amines. Cu(I)-MOF can be readily recovered from the reaction mixture and reused for several cycles without loss in the catalytic activity.     

New palladium (II) complexes containing phosphine‐nitrogen ligands and their use as catalysts in aminocarbonylation reaction

Aminocarbonylation of aryl halides, homogeneously catalysed by palladium, is an efficient method that can be employed for obtaining amides for pharmaceutical and synthetic applications. In this work, palladium (II) complexes containing P^N ligands were studied as catalysts in the aminocarbonylation of iodobenzene in the presence of diethylamine. Two types of systems were used: a palladium (II) complex formed in situ; and one prepared prior to the catalytic reaction. In general, the palladium complexes studied achieved high conversions in an average reaction time of less than 2 hr, which is less than that for the standard system (Pd (II)/PPh₃) used. The pre‐synthesized complexes were faster than their in situ counterparts, as the latter require an induction time to form the Pd/P^N species. The structure and electronic properties of the ligand P^N can influence both the activity and the selectivity of the reaction, stabilizing the acyl‐palladium intermediates formed in a better manner.     

Ethylene Oligomerization Catalyzed by MCl2(PPh3)2 Complex‐es/Ethylaluminoxane

The catalytic properties of MCl₂ (PPh₃)₂ (M = Fe, A; Co, B; Ni, C) in combination with ethylaluminoxane (EAO) as cocatalyst for ethylene oligomerization have been investigated. Treatment of the MCl₂ (PPh₃)₂ complexes with EAO in toluene generated active catalysts in situ that are capable of oligomerizating ethylene to low‐carbon olefins. The catalytic activity and product distribution were affected by reaction condition, such as reaction temperature, the ratios of Al/M and the reaction time. The activity of 1.70 × 10⁵ g oligomers/ (mol Co. h) for the catalytic system of CoCl₂(PPh₃)₂ with EAO at 200°C was observed, with the selectivity of 91.1% to C_4–10 olefins and 70.7% to C_4–10 linear α‐olefins.     

Oxidation of sec‐alcohols with Ru(II)‐bearing microgel star polymer catalysts via hydrogen transfer reaction: Unique microgel‐core catalysis

Oxidation of sec‐alcohols was investigated with ruthenium‐bearing microgel core star polymer catalysts [Ru(II)‐Star]. The star polymer catalysts were directly prepared via RuCl₂(PPh₃)₃‐catalyzed living radical polymerization of methyl methacrylate (MMA), followed by the arm‐linking reaction with ethylene glycol dimethacrylate ( 1 ) in the presence of diphenylphosphinostyrene ( 2 ). The Ru(II)‐Star efficiently and homogeneously catalyzed the oxidation of 1‐phenylethanol ( S1 ) to give a corresponding ketone (acetophenone) in higher yield (92%) than the analogs of polymer‐supported ruthenium complexes. Importantly, the star catalyst afforded high recycling efficiency in the oxidation. They held catalytic activity against three times catalysis even though they were recovered under air‐exposure, whereas the conventional RuCl₂(PPh₃)₃ lost the activity for same recycling procedure due to the deactivation by oxygen. The stability of the star catalysts during the recycle experiment was confirmed by detailed spectroscopic characterization. The star polymers also catalyzed oxidation for a wide range of sec‐alcohols with aromatic and aliphatic groups. The substrate affinity was different from that with RuCl₂(PPh₃)₃, suggesting the unique selectivity caused by the specific structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Effect of addition of iron on morphology and catalytic activity of PdCu nanoalloy thin film as catalyst in Sonogashira coupling reaction

Palladium‐supported catalysts are complex assemblies with a challenging preparation. Minor changes in their preparation conditions can affect the activity, selectivity and lifetime of these catalysts. PdCuFe nanoparticle (NP) thin films were supported on reduced graphene oxide (RGO) by the reduction of the organometallic complex [PdCl_2‌(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), and [Cu(acac)₂] and [Fe(acac)₃] (acac = acetylacetonate) complexes at a toluene–water interface. We have investigated the application of the liquid–liquid interface method for preparing ultrathin films of catalysts and have evaluated the catalytic activity of the prepared NPs for the Sonogashira coupling reaction in micelle media. Also, we have investigated the effect of the addition of iron on the morphology, size and catalytic activity of PdCu/RGO NPs. Our study shows that both of the prepared catalysts (PdCu/RGO and PdCuFe/RGO) are efficient and recoverable catalysts for the Sonogashira carbon–carbon coupling reaction. This method has advantages compared to other routes, such as short reaction times, high to excellent yields, facile and low‐cost method for the preparation of the catalysts, and easy separation and reusability of the catalysts.     

KF改性负载铜催化剂在Heck反应上的应用

KF水溶液浸渍MgO或ZnO载体为改性载体制备了负载铜催化剂,以卤苯与丙烯酸正丁酯的反应为模型,考察了对Heck反应的催化性能。结果表明,对碘苯与丙烯酸正丁酯的Heck反应的催化性能,未改性催化剂基本没有活性,而改性后,10%Cu/5%KF/ZnO、20%Cu/10%KF/ZnO催化剂的催化转化率为100%和反式异构体的选择性为98%以上。改性催化剂10%Cu/5%KF/ZnO对于对-硝基溴苯与丙烯酸正丁酯的Heck反应的转化率为34.3%。该催化剂重复使用4次仍有较高催化活性,如20%Cu/10%KF/ZnO为65.4%。催化剂的XRD分析表明,改性剂的加入可提高催化剂表面CuO的含量而提高催化性能。     

Tailoring the surface structure of iron compounds to optimize the selectivity of 3-nitrostyrene hydrogenation reaction over Pt catalyst

Selective hydrogenation of substituted nitroarenes is an important reaction to obtain amines.Supported metal catalysts are wildly used in this reaction because the surface structure of supports can tune the properties of the supported metal nanoparticles （NPs） and promote the selectivity to amines.Herein,Pt NPs were immobilized on Fe OOH,Fe₃O₄andα-Fe₂O₃nanorods to synthesize a series of iron compounds supported Pt catalysts by liquid phase reduction me...     

Direct in situ synthesis of cationic N-heterocyclic carbene iridium and rhodium complexes from neat ionic liquid: Application in catalytic dehydrogenation of cyclooctadiene

A direct synthetic route to cationic N-heterocyclic carbene (NHC) complexes of rhodium and iridium from neat dialkyl-imidazolium ionic liquids (ILs) has been found. The method uses complexes bearing basic anionic ligands, [M(COD)(PPh₃)X], X = OEt, MeCO₂, which react with the inactivated imidazolium cation in the absence of external bases yielding one M-NHC moiety and the free protonated base. This new one-pot synthesis leaving pure, catalytically active IL solutions is faster, cleaner and more efficient than traditional syntheses of such NHC complexes. The observed reactivity also gives insight into NHC incorporation of rhodium and iridium catalyzed reactions performed in common dialkyl-imidazolium ILs.The complexes synthesised in this manner are compared with their bis-phosphine analogues in terms of activity for catalytic dehydrogenation of 1,5-cyclooctadiene and 1,3-cyclooctadiene in neat [BMIM][NTf₂] as solvent. Even at high temperature, no ligand exchange reaction is observed with [(COD)M(PPh₃)₂] [NTf₂] catalysts. As expected, the yields of all the reactions were low, iridium was much more active in C-H activation than rhodium and the NHC ligands were more stable than triphenylphosphine. For all catalysts, the isomerisation of 1,5-cyclooctadiene is the major reaction. However, the phosphine-NHC complex of iridium seems to be more selective for dehydrogenation than its bis-phosphine counterpart, which is more active in transfer-hydrogenation and less stable under the applied conditions. Different reaction conditions were tried in order to optimise selectivity for dehydrogenation over isomerisation and transfer-hydrogenation. Surprisingly, with 1,3-cyclooctadiene as substrate selectivity for dehydrogenation is much higher than with 1,5-cyclooctadiene for all catalysts.     

Effect of oxygen on the activity of a Pd-Fe/a-Al2O3catalyst for CO coupling to diethyl oxalate

The effect of oxygen on the activity and selectivity of a Pd-Fe/a-Al₂O₃ catalyst for CO coupling to diethyl oxalate (DEO) was studied in the range of 105 - 120^oC. The results showed that the conversion of CO and the STY (Space Time Yield) of DEO increased with increasing oxygen concentration from 5 to 10 mol% and reaction temperature, but the selectivity to DEO decreased. The role of oxygen in CO coupling is discussed on the basis of the experimental results in the present work and the XPS characterization of the catalysts. It was also found that the activity and selectivity of the catalyst could be fully recovered after removing O₂ from the reaction system.     

Hydrosilylation Catalyzed with Rh(PPh3)3Cl/Ionic-Liquid–Functionalized SiO2

Ionic liquid–modified silica has been prepared by a “one-pot” reaction of activated silica, 3-chloropropyltriethoxysilane, and alkylimidazole or pyridine. It was found that the catalytic activity and β-adduct selectivity of the supported catalyst Rh(PPh₃)₃Cl/ionic-liquid–modified-SiO₂ for the hydrosilylation reaction of alkenes with triethoxysilane was significantly improved. Furthermore, the catalyst system could be recovered easily.     

铁铜双金属催化剂选择性催化氧化氨为氮气

固定铜铁的总质量不变, 采用共浸渍法制备铜铁双金属催化剂. 为了更好地了解催化剂的性质, 分别用N₂吸附-脱附、H₂-程序升温还原(H₂-TPR)、NH₃-程序升温脱附(NH₃-TPD)、X射线衍射(XRD)和X射线光电子能谱(XPS)方法对制备的催化剂进行表征. 研究发现在100000 h^-1空速下, 铜铁双金属催化剂呈现出好的活性和氮气选择性. 在低温区, 随着铜含量的增加, 活性和氮气的选择性增加, 然而在高温区氮气的选择性直接和铁的含量相关. 其中催化剂Fe_0.25Cu_0.75/ZSM-5, 在350℃氨的转化率达到最高, 在300℃氮气的选择性上升到97%. Fe_0.75Cu_0.25/ZSM-5 在500 ℃有很高的氮气选择性甚至可以达到98%. 并且所有的催化剂均产生很少的N₂O副产物. 表征结果显示催化剂的酸量和铜物种的含量可以影响催化剂的活性, 并且高的还原能力和铁含量有助于高温氮气选择性的提高.     

Selective Hydrogenation of Diethyl Disulfide to Ethanethiol in the Presence of Sulfide Catalysts

The gas-phase reaction of diethyl disulfide hydrogenation at atmospheric pressure in the presence of supported transition metal sulfides was studied. The reaction of diethyl disulfide with hydrogen at T = 200°C resulted in ethanethiol, and the selectivity to ethanethiol was no lower than 94%. The selectivity decreased at a higher temperature because of diethyl disulfide decomposition to ethylene and hydrogen sulfide. The reaction of diethyl disulfide in the presence of hydrogen occurred at a higher rate and selectivity than that in an atmosphere of helium. The activity of metal sulfides supported on aluminum oxide was higher than on the other studied supports—aluminosilicate, silica gel, and a carbon support. Metal sulfides supported on Al₂O₃ were arranged in the following order according to their activity: Rh > Ru > Mo Pd > Ni > W. Bimetallic catalysts were less active than monometallic catalysts. The activity of catalysts increased with the sulfide sulfur content; the partial reduction of metal sulfides also increased the catalytic activity.     

Continuous‐Flow Suzuki‐Miyaura and Mizoroki‐Heck Reactions under Microwave Heating Conditions

Microwave‐assisted continuous‐flow reactions have attracted significant interest from synthetic organic chemists, especially process chemists from practical points of view, due to a less complicated shift to large‐scale synthesis based on simple and continuous access to products with low energy requirements. In this personal account, we focused on the Suzuki‐Miyaura and Mizoroki‐Heck reactions, both of which are significantly important cross‐coupling reactions for the synthesis of various functional materials. Microwave power is effective for heating. Typical homogeneous palladium catalysts, such as PdCl₂(PPh₃)₂, Pd(PPh₃)₄, and Pd(OAc)₂, as well as heterogeneous palladium catalysts, such as Pd‐film, Pd/Al₂O₃, Pd/SiO₂, and Pd supported on polymers, can be used for these reactions.     

Palladium catalyzed three component coupling reaction between chromones, alcohols, and allylic acetates: diversity-oriented synthesis of highly substituted chromones

This paper describes the palladium catalyzed highly efficient three component coupling (TCC) reactions between chromones, allylic acetates, and alcohols, which lead to a library of multiply substituted chromones. The activity of various palladium catalysts, such as Pd(PPh₃)₄ and Pd₂dba₃·CHCl₃ and their combination with various bisphosphine ligands, was investigated by using THF as a solvent, which revealed that Pd(PPh₃)₄ catalyst was the best one. The reaction most probably proceeds via the formation of benzopyrilium cation, generated from the reaction between chromones and allyl acetate, in the presence of palladium catalyst. The subsequent trapping of the benzopyrilium cation by alcohols would give the corresponding products in excellent yields. This alkoxy-allylation reaction was highly diastereoselective and only one diastereomer was obtained in all the cases.     

Heck reactions of iodobenzene and methyl acrylate with conventional supported palladium catalysts in the presence of organic and/or inorganic bases without ligands

The vinylation of iodobenzene with methyl acrylate has been studied with several supported palladium catalysts in N-methylpyrrolidone in the presence of triethylamine and/or sodium carbonate. The reaction can be performed in air without any solubilizing or activating ligands. It was found that significant amounts of palladium leach out into the solvent and these dissolved Pd species essentially catalyze the reaction. It is interesting, however, that almost all the palladium species in the solution can redeposit onto the surface of the supports after the reaction has been completed (at 100% conversion of iodobenzene). Thus, the catalysts were recyclable without loss of activity. The use of both inorganic and organic bases is very effective in the promotion of the palladium redeposition as well as in the enhancement of the reaction rate. For Heck reactions with bromobenzene and chlorobenzene it was found that the use of triethylamine and sodium carbonate increases the selectivity of the Heck coupling product (benzene is also produced for these two substrates), but the mixed bases do not affect the overall rate of reaction as much.