Surface and bulk conduction and thermodynamic properties of ionic salt CsH<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Transport properties of ionic salt CsH₅(PO₄)₂ are studied by the impedance method. The salt’s bulk conductivity ranges from 10^?8 to 10^?4 S cm^?1 in the temperature interval 90 to 145°C. The apparent activation energy is high (1.6–2.0 eV). The conductivity is slightly anisotropic: it is maximum in the [001] direction and minimum in the [100] direction (～5.6 and 1 times × 10^?6 S cm^?1, respectively, at 130°C). The conductivity of polycrystalline samples is higher by 1–2 orders of magnitude, and the activation energy drops to 1.05 eV due to the formation of a pseudoliquid layer with a high proton mobility at the intercrystallite boundary. The salt’s thermodynamic properties are examined by differential scanning calorimetry and thermogravimetry. No phase transitions are discovered in the salt up to the melting point (151.6°C), with the melting enthalpy equal to ～34 kJ mol^?1. The crystallization occurs at lower temperatures (107°C) and the crystallization enthalpy (?18 kJ mol^?1) is lower than the melting enthalpy. The melting is accompanied by slow decomposition of the salt. Factors affecting the proton transport in the salt are analyzed.     

Crystal structures of polyphosphates MCs<Subscript>5</Subscript>(PO<Subscript>3</Subscript>)<Subscript>8</Subscript> (M = Pr,Eu, and Gd)

Crystals of double polyphosphates EuCs₅(PO₃)₈ (I) and GdCs₅(PO₃)₈ (II) have been studied by X-ray diffraction. The isostructural crystals of I and II are monoclinic, space group C2. Only unit cell parameters have been determined for the crystals of double Pr and Cs polyphosphate (III). This crystal is isostructural with earlier studied La₃Cs₁₅P₂₄O₇₂ · 6H₂O (IV). The crystals of compounds III and IV are triclinic, space group P1, Z = 1; a = 11.987(2) and 12.178(5) Å, b = 14.754(8) and 14.740(8) Å, c = 14.692(8) and 14.847(9) Å, α = 60.15(4)° and 60.87(5)°, β = 67.04(4)° and 66.35(4)°, γ = 78.76(3)° and 77.54(4)°, respectively. In compounds I and II, the polyphosphate anions exist as infinite chains. The M^IIIO₈ polyhedra are isolated from each other but share edges and faces with the CsO _n polyhedra.     

Synthesis of hydroxyapatite by hydrolysis of α-Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Conditions for hydroxyapatite (HAP) synthesis in aqueous solutions by hydrolysis of α-Ca₃(PO₄)₂ were studied. Temperature exerts a substantial effect on the rate of α-Ca₃(PO₄)₂ hydrolysis and also changes the morphology of the reaction products. At 40 °C, the plate-like intersecting (perpendicular to the surface of the initial particles) crystals of HAP grow. Their maximum size after the 24-h hydrolysis is 1–2 µm. Needle like HAP crystals are formed upon boiling of the suspension. The morphology observed for the HAP particles agrees well with the conclusions obtained by analysis of the kinetics of tricalcium phosphate hydrolysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 78–85, January, 2005.     

Synthesis and study of sodium triuranate Na<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>3</Subscript>O<Subscript>3</Subscript>(OH)<Subscript>2</Subscript>

Sodium triuranate Na₂(UO₂)₃O₃(OH)₂ was synthesized by the reaction between aqueous uranyl acetate solution and aqueous sodium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the synthesized compound were determined, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and thermal analysis.     

Synthesis,phase formation,and thermal expansion of sulfate phosphates with the NaZr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> structure

The NaFeZr(PO₄)₂SO₄ and Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 sulfate phosphates with the NaZr₂(PO₄)₃ (NZP) structure were synthesized and studied using X-ray diffraction, electron microprobe analysis, IR spectroscopy, and simultaneous differential thermal and thermogravimetric analysis. The phase formation and thermal stability of the compounds were studied by powder X-ray diffraction and DTA–TG. The Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 structure was refined by full-profile analysis. The structure framework is composed of randomly occupied (Fe,Zr)O₆ octahedra and (P,S)O₄ tetrahedra; the Pb²⁺ ions occupy extra-framework sites. The thermal expansion of Pb_2/3FeZr(PO₄)_7/3(SO₄)_2/3 in the temperature range from–120 to 200°C was studied by temperature X-ray diffraction. In terms of the average linear coefficient of thermal expansion (α_av = 1.7 × 10^–6°C^–1), this compound can be classified as having low expansion. The combination of different tetrahedral anions (a phosphorus and a smaller sulfur one) in the NZP resulted in a decrease in the framework size and cavities and enabled the preparation of low-expansion sulfate phosphate with a smaller extra-framework cation (cheap Pb) instead of larger cations (Cs, Ba, Sr) used most often in the monoanionic phosphates.     

Synthesis and crystal structure of phosphate Ba<Subscript>1.5</Subscript>Fe<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Double phosphate Ba_1.5Fe₂(PO₄)₃ was synthesized and structurally studied. Single crystals were synthesized by the fusion method. Cubic crystals, Z = 4, space group P2₁3, a = 9.866(1) Å. This structure is built of polyhedrons of four types: PO₄ tetrahedrons, two virtually regular FeO₆ octahedrons, BaO₁₂ twelve-vertex polyhedrons, and BaO₉ nine-vertex polyhedrons. These polyhedrons share common oxygen vertices to form three-dimensional [Fe₂(PO₄)₃]_3∞ framework containing barium atoms in cavities.     

Synthesis and study of the phosphate Cs<Subscript>2</Subscript>Mn<Subscript>0.5</Subscript>Zr<Subscript>1.5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The new phosphate Cs₂Mn_0.5Zr_1.5(PO₄)₃ was synthesized for the first time and characterized by X-ray diffraction. Its crystal structure was refined in space group P2₁3, Z = 4 at 25°C (a = 10.3163(1) Å, V = 1097.93(1) ų), by the Rietveld method using the powder X-ray diffraction data. The structure is built of an octahedral-tetrahedral framework {[Mn_0.5Zr_1.5(PO₄)₃]^2?}_3∞ with cesium atoms being located in large cavities. The hydrolytic stability of the powdered phosphate containing ¹³⁷Cs radionuclide was studied. The minimum achieved ¹³⁷Cs leaching rate was 4 × 10^?8 g/cm₂ day.     

Organic-inorganic hybrid perovskite (C<Subscript>6</Subscript>H<Subscript>5</Subscript>(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>NH<Subscript>3</Subscript>)<Subscript>2</Subscript>CdCl<Subscript>4</Subscript>: Synthesis,structural and thermal properties

The present research work reports the study on crystal structure, vibrational spectroscopy and thermal analysis of organic-inorganic hybrid compound (C₆H₅(CH₂)₂NH₃)₂CdCl₄. Single crystals of bis(phenethylammonium)tetrachlorocadmate (C₆H₅(CH₂)₂NH₃)₂CdCl₄ (PEA–Cd) were obtained by diffusion at room temperature. This compound crystallizes in the orthorhombic space group C2cb with unit cell parameters a = 7.4444(2) Å, b = 38.8965(3) Å, c = 7.3737(2) Å and Z = 4. Single crystal structure has been solved and refined to R = 0.036 and wR = 0.092. The structure consists of an extended [CdCl₄]^2– network and two [C₆H₅(CH₂)₂NH₃]⁺ cations to form a two-dimensional perovskite system. The infrared (IR) spectrum of the title compound was recorded at room temperature. Differential scanning calorimetry (DSC) was used to investigate the phase transition; this compound exhibits a reversible single solid-solid phase transition.     

Synthesis,structural, spectral,thermal and comparative biological activity studies of [V<Subscript>2</Subscript>O<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]

The hydrothermal reaction of a mixture of V₂O₅, VCl₃, 2,5-pyridinedicarboxylic acid and diluted H₂SO₄ for 68 h at 180°C gives a blue colored solution which yields prismatic blue crystals of IV ₂ ^IV O₂(SO₄)₂(H₂O)₆] (1) in 32% yield (based on V). Complex 1 was investigated by means of elemental analysis (C, H and S), TGA, FT-IR, manganometric titration, Single Crystal X-ray Diffraction Methods and also comparative antimicrobial activities. Crystal data for the compound: monoclinic space group P2₁/c and unit cell parameters are a = 7.3850(12) Å, b = 7.3990(7) Å, c = 12.229(2) Å, β = 108.976(12)° and Z = 2. Although structure of 1 as a natural mineral has been previously determined, this work covers new preparation method and full characterization of 1 along with comparison of antibacterial activity between 1 and the commercial vanadium(IV) oxide sulfate hydrate compounds, VOSO₄ · xH₂O (Riedel-de Haën and Alfa Aesar brand names). 1 was evaluated for the antimicrobial activity against gram-positive, gram-negative bacteria, yeasts and mould compared with the commercial VOSO₄ · xH₂O compounds. 1 showed weak activity against bacteria Bacillus cereus, Nocardia asteroides and yeast Candida albicans. A good antimicrobial activity was recorded against Cirtobacter freundii (15 mm). There are only a few reproducible well-defined vanadium(IV) starting materials to use for exploring the synthesis of new materials. VCl₄, VO(acac)₂, VOSO₄ · xH₂O and [V(IV)OSO₄(H₂O)₄] · SO₄ · [H₂N(C₂H₄)₂NH₂] are common starting materials for such applications. In addition to these compounds, 1 can be used as an oxovanadium precursor.     

Synthesis and structure of phosphates M<Subscript>0.5</Subscript>Ti<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Phosphates M_0.5Ti₂(PO₄)₃ (M = Ni, Zn) were synthesized by the sol-gel method and characterized by the methods of X-ray diffraction, IR spectroscopy, and electronic microprobe analysis. Structures of Ni_0.5Ti₂(PO₄)₃ and Zn_0.5Ti₂(PO₄)₃ were studied by Rietveld method using the X-ray powder diffraction data.     

The synthesis and thermochemical study of (Mg,Fe)<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> nanotubes

Nanotubular (Mg,Fe²⁺,Fe³⁺)₃Si₂O₅(OH)₄ hydrosilicates with a chrysotile structure were synthesized under hydrothermal conditions. The phases prepared were studied thermochemically on a high-temperature Tian-Calvet microcalorimeter by solution calorimetry. The standard enthalpies of formation of magnesium-iron nanotubular hydrosilicates were determined. The formation of iron-containing nanotubes was shown to be lass favorable energetically than the formation of magnesium nanotubes.     

Structural relaxation of scintillating Ce-doped NaGd(PO<Subscript>3</Subscript>)<Subscript>4</Subscript> glass

Structural relaxation of scintillating Ce-doped Na–Gd phosphate glass with a nominal composition of Ce:NaGd(PO₃)₄ was experimentally studied using non-isothermal thermo-mechanical analysis, and the relaxation process was described by the Tool–Narayanaswamy–Mazurin model. The distribution of relaxation times was expressed by the empirical Kohlrausch–Williams–Watts relaxation function with relaxation time directly proportional to dynamic viscosity. The model parameters and material constants were obtained by the nonlinear regression analysis of thermo-mechanical data. It has been concluded that the model used of structural relaxation correctly describes relaxation processes in studied Ce-doped NaGd(PO₃)₄ glass.     

Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/nitrogen-doped reduced graphene oxide nanocomposite with enhanced lithium storage properties

The three-dimensional porous Li₃V₂(PO₄)₃/nitrogen-doped reduced graphene oxide (LVP/N-RGO) composite was prepared by a facile one-pot hydrothermal method and evaluated as cathode material for lithium-ion batteries. It is clearly seen that the novel porous structure of the as-prepared LVP/N-RGO significantly facilitates electron transfer and lithium-ion diffusion, as well as markedly restrains the agglomeration of Li₃V₂(PO₄)₃ (LVP) nanoparticles. The introduction of N atom also has positive influence on the conductivity of RGO, which improves the kinetics of electrochemical reaction during the charge and discharge cycles. It can be found that the resultant LVP/N-RGO composite exhibits superior rate properties (92 mA h g^?1 at 30 C) and outstanding cycle performance (122 mA h g^?1 after 300 cycles at 5 C), indicating that nitrogen-doped RGO could be used to improve the electrochemical properties of LVP cathodes for high-power lithium-ion battery application.

Open image in new window

Graphical abstract The three-dimensional porous Li₃V₂(PO₄)₃/nitrogen-doped reduced graphene oxide composite with significantly accelerating electron transfer and lithium-ion diffusion exhibits superior rate property and outstanding cycle performance.

     

Synthesis,structural, and electrochemical properties of NaCo(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> cathode for sodium-ion batteries

A new Co-base sodium metaphosphate compound, NaCo(PO₃)₃, has been synthesized here by solid-state method. The crystal structure is refined by the Rietveld method, and the results reveal that NaCo(PO₃)₃ has an orthorhombic structure with the space group of P2 ₁ 2 ₁ 2 ₁ and lattice parameters of a = 14.2453(2) Å, b = 14.2306(1) Å, and c = 14.2603(2) Å. Its typical morphology and chemical composition are confirmed by scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS). The valence states of all elements and the internal/external vibrational modes of NaCoP₃O₉ compound are measured by X-ray photoelectron and vibrational spectrum, where a typical feature of the (PO₃)^? polyanion group is observed. Meanwhile, the electrochemical properties of NaCo(PO₃)₃ cathode for sodium-ion batteries are also elevated and an initial discharge capacity of 33.8 mAh/g can be obtained at 0.05 C within 1.5–4.2 V. After 20 cycles, a discharge capacity of 26.7 mAh/g can be obtained and a well-kept oxidation–reduction plateau is still observed for NaCo(PO₃)₃ cathode, indicating the good reversibility of this metaphosphate electrode.     

Synthesis of the mixed oxide catalysts based upon the nickel-copper hydrotalcites of the type Ni<Subscript>x</Subscript>Cu<Subscript>6-x</Subscript>Cr<Subscript>2</Subscript>(OH)<Subscript>16</Subscript>(CO<Subscript>3</Subscript>)×4H<Subscript>2</Subscript>O

Summary High resolution TG coupled to a gas evolution mass spectrometer has been used to study the thermal properties of a chromium based series of Ni/Cu hydrotalcites of formulae Ni_xCu_6-xCr₂(OH)₁₆(CO₃)×4H₂O where x varied from 6 to 0. The effect of increased Cu composition results in the increase of the endotherms and mass loss steps to higher temperatures. Evolved gas mass spectrometry shows that water is lost in a number of steps and that the interlayer carbonate anion is lost simultaneously with hydroxyl units. Differential scanning calorimetry was used to determine the heat flow steps for the thermal decomposition of the synthetic hydrotalcites. Hydrotalcites in which M²⁺ consist of Cu, Ni or Co form important precursors for mixed metal-oxide catalysts. The application of these mixed metal oxides is in the wet catalytic oxidation of low concentrations of retractable organics in water. Therefore, the thermal behaviour of synthetic hydrotalcites, Ni_xCu_6-xCr₂(OH)₁₆CO₃×nH₂O was studied by thermal analysis techniques in order to determine the correct temperatures for the synthesis of the mixed metal oxides.     

Synthesis,structure, and properties of M<Subscript>3</Subscript>VO<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript> (M = Rb,Cs)

Vanadium(V) complexes of general composition M₃VO₂(SO₄)₂ (M = Rb, Cs) were synthesized by a solid-state route. The individuality of the synthesized compounds was proved by X-ray and neutron diffraction, vibrational spectroscopy, and microscopic analysis. The X-ray diffraction patterns of M₃VO₂(SO₄)₂ were indexed to fit the monoclinic system (space group P2/c, Z = 4) with the following unit cell parameters: a = 11.6487(2) Å, b = 8.4469(2) Å, c = 12.1110(2) Å, β = 109.483(1)°, V = 1123.43 ų (Rb); a = 12.0546(3) Å b = 8.7706(2) Å, c = 12.6496(3) Å, β = 109.843(2)°, V = 1257.99 ų (Cs). In the crystal structure of M₃VO₂(SO₄)₂, [VO₂(SO₄)₂]^3? complex anions can be discerned in which the vanadium atom is surrounded by five oxygen atoms: two oxygen atoms form short terminal V–O bonds, and three oxygen atoms are from the two sulfato groups, one of which acts as a monodentate ligand and the other acts as a bidentate chelating ligand.     

Natural graphite enhanced the electrochemical performance of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> cathode material for lithium ion batteries

Natural graphite treated by mechanical activation can be directly applied to the preparation of Li₃V₂(PO₄)₃. The carbon-coated Li₃V₂(PO₄)₃ with monoclinic structure was successfully synthesized by using natural graphite as carbon source and reducing agent. The amount of activated graphite is optimized by X-ray diffraction, scanning electron microscope, transmission electron microscope, Raman spectrum, galvanostatic charge/discharge measurements, cyclic voltammetry, and electrochemical impedance spectroscopy tests. Our results show that Li₃V₂(PO₄)₃ (LVP)-10G exhibits the highest initial discharge capacity of 189 mAh g^?1 at 0.1 C and 162.9 mAh g^?1 at 1 C in the voltage range of 3.0–4.8 V. Therefore, natural graphite is a promising carbon source for LVP cathode material in lithium ion batteries.     

Impact of carbon coating thickness on the electrochemical properties of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C composites

A series of Li₃V₂(PO₄)₃/C composites with different amounts of carbon are synthesized by a combustion method. The physical and electrochemical properties of the Li₃V₂(PO₄)₃/C composites are investigated by X-ray diffraction, element analysis, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy and electrochemical measurements. The effects of carbon content of Li₃V₂(PO₄)₃/C composites on its electrochemical properties are conducted with cyclic voltammetry and electrochemical impedance. The experiment results clearly show that the optimal carbon content is 4.3 wt %, and more or less amount of carbon would be unfavorable to electrochemical properties of the Li₃V₂(PO₄)₃/C electrode materials. The results would provide some basis for further improvement on the Li₃V₂(PO₄)₃ electrode materials.     

Indium strontium hydrogen phosphate SrIn<Subscript>2</Subscript>[PO<Subscript>3</Subscript>(OH)]<Subscript>4</Subscript>: Synthesis and crystal structure

Indium strontium hydrogen nitrate SrIn₂[PO₃(OH)]₄ was synthesized under mild hydrothermal conditions (T = 180 or 200°C) and characterized using IR spectroscopy, chemical analysis, and thermal analysis. A structure model obtained ab initio was refined by the Rietveld method: a= 9.6412(1) Å, b = 13.763(1) Å, c = 9.3579(1) Å, R _obs = 0.0183, R _p = 0.0493 (space group B22₁2, Z = 4). The acentricity of the structure was confirmed by SHG tests (I _2ω/I _2ω(SiO2) ≈ 2.0). In the SrIn₂[PO₃(OH)]₄ structure, indium atoms reside in distorted InO₆ octahedra and form, together with PO₃(OH) tetrahedra, a mixed 3D structure {In₂[PO₃(OH)]₄} _3∞ ^2? whose voids are occupied by Sr²⁺ cations (CN = 8). The block-dimer In₂(HPO₄)₁₀ is the most informative unit of the framework. Blocks are condensed into infinite columns running in the [101] direction. The compound is thermally stable up to 400°C.     

Structural investigation of [Au(en)<Subscript>2</Subscript>]Cl(ReO<Subscript>4</Subscript>)<Subscript>2</Subscript> and [Au(en)<Subscript>2</Subscript>](ReO<Subscript>4</Subscript>)<Subscript>3</Subscript> complexes

Novel complex salts [Au(en)₂]Cl(ReO₄)₂ (I) and [Au(en)₂](ReO₄)₃ (II), en = ethylenediamine, are obtained. Their crystal structures are determined by single crystal X-ray diffraction. Complex I crystallizes in the triclinic crystal system: a = 6.2172(7) Å, b = 7.1644(8) Å, c = 8.8829(8) Å, α = 96.605(4)°, β = 110.000(4)°, γ = 97.802(4)°, P-1 space group, Z = 1, d _x = 3.905 g/cm³; complex II crystallizes in the monoclinic crystal system: a = 15.244(2) Å, b = 7.6809(8) Å, c = 9.3476(12) Å, β = 127.004(3)°, C2 space group, Z = 4, d _x = 4.057 g/cm³.