Enzyme-mediated enantioselective hydrolysis of poly(ethylene glycol)-supported carbonates

Kinetic resolution of poly(ethylene glycol)(PEG)-supported carbonates by enzymatic hydrolysis is discussed. Water-soluble carbonates are prepared by immobilization of racemic secondary alcohols onto low-molecular weight monomethoxy PEG (MPEG) through a carbonate linker. Porcine pancreas lipase (PPL) enantioselectively catalyzes the hydrolysis of the substrates to give optically active compounds. In this system, the separation of the resulting alcohols and the remaining substrates is achieved by an extraction process without laborious column chromatography. The carbonates are easily hydrolyzed with K₂CO₃ to afford the corresponding alcohols.     

Poly（ethylene glycol）-supported Liquid-phase Parallel Synthesis of Di（aryloxyacetyl）thiosemicarbazides

An efficient poly(ethylene glycol) (PEG)-supported liquid-phase parallel approach to di(aryloxyacetyl)thiosemicarbazides is described. PEG-bound phenol reacted with chloroacetic acid to afford PEG-bound phenyloxyacetic acid, which was readily converted into corresponding phenyloxyacetyl chloride. Subsequent nucleophilic substitution with ammonium thiocyanate followed by addition of aryloxyacetic acid hydrazides gave PEG-bound di(aryloxyacetyl)thiosemicarbazides, which were easily cleaved to give the resulting library of 1-aryloxyacetyl-4-(4‘-methoxylcarbonylphenyloxyacetyl)thiosemicarbazides in good to high yield and high purity.     

聚乙二醇支持的异噁唑啉衍生物的液相合成及其晶体结构

通过可溶性聚乙二醇支持的丙烯酸酯与由醛肟原位产生的腈氧化物进行1,3-偶极环加成反应,合成了PEG支持的异噁唑啉衍生物(3);3用甲醇钠-甲醇溶液解脱,高产率(84%～95%)地合成了4个3,5-二取代异噁唑啉衍生物(4a～4d),其结构经1H NMR, IR, EI-MS表征.采用X-射线单晶衍射测定了4d的晶体结构,4d属单斜晶系,C2/c空间群,晶胞参数:a=26.965 5(17)(A), b=9.370 5(6)(A), c=8.946 5(6)(A), α=γ=90°, β=97.226(2) °, V=2 242.6(3)(A)3, Z=8, Dc=1.299 mg·m-3, μ=0.094 mm-1, F(000)=928, R1=0.041 5, wR2=0.106 4.     

Poly(ethylene glycol)-supported nitroxyls: branched catalysts for the selective oxidation of alcohols

Nitroxyl radicals such as 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) are highly selective oxidation catalysts for the conversion of primary alcohols into the corresponding aldehydes. In this study, direct tethering of TEMPO units onto linear poly(ethylene glycol) (PEG) has afforded macromolecular catalysts that exhibit solubility in both aqueous and organic solvents. Recovery of the dissolved polymer-supported catalyst has been carried out by precipitation with a suitable solvent such as diethyl ether. The high catalyst activities and selectivities associated traditionally with nitroxyl-mediated oxidations of alcohols are retained by the series of "linker-less" linear PEG-TEMPO catalysts in which the TEMPO moiety is coupled directly to the PEG support. Although the selectivity remains unaltered, upon recycling of the linker-less polymer-supported catalysts, extended reaction times are required to maintain high yields of the desired carbonyl compounds. Alternatively, attachment of two nitroxyl radicals onto each functionalized PEG chain terminus via a 5-hydroxyisophthalic acid linker affords branched polymer-supported catalysts. In stark contrast to the linker-less catalysts, these branched nitroxyls exhibit catalytic activities up to five times greater than 4-methoxy-TEMPO alone under similar conditions. In addition, minimal decrease in catalytic activity is observed upon recycling of these branched macromolecular catalysts via solvent-induced precipitation. The high catalytic activities and preservation of activity upon recycling of these branched systems is attributed to enhanced regeneration of the nitroxyl species as a result of intramolecular syn-proportionation.     

Poly(ethylene glycol)-supported Piperazine——Synthesis and Application in Knoevenagel Condensation

A soluble,poly(ethylene glycol)-supported piperazine catalyst was prepared.This soluble catalyst efficiently catalyzes the Knoevenagel condensation of various aromatic aldehydes with diethyl malonate or ethyl acetoacetate in a homogeneous phase to afford the desired alkenes in good purity and yield with a facile work-up process.It was found that the polymer reagent could be repeatedly used at least four times without the too much loss of activity.The catalyst has shown a good activity,stability,and recyclin...     

Poly(ethylene glycol)-supported tetrahydroxyphenyl porphyrin: a convenient,recyclable catalyst for photooxidation reactions

[reaction: see text] A new poly(ethylene glycol)-supported porphyrin has been prepared and its ability as a promoter in photooxidation reactions has been studied. The PEG-supported catalyst exhibits high activity, comparable to that of a nonanchored sensitizer, and it is easily removable by filtration from the reaction mixture. The polymer-bound porphyrin has been recycled up to six times with no loss of chemical and stereochemical efficiency.     

Multifunctional Poly(ethylene glycol)s

In the rapidly evolving multidisciplinary field of polymer therapeutics, tailored polymer structures represent the key constituent to explore and harvest the potential of bioactive macromolecular hybrid structures. In light of the recent developments for anticancer drug conjugates, multifunctional polymers are becoming ever more relevant as drug carriers. However, the potentially best suited polymer, poly(ethylene glycol) (PEG), is unfavorable owing to its limited functionality. Therefore, multifunctional linear copolymers (mf‐PEGs) based on ethylene oxide (EO) and appropriate epoxide comonomers are attracting increased attention. Precisely engineered via living anionic polymerization and defined with state‐of‐the‐art characterization techniques—for example real‐time ¹H NMR spectroscopy monitoring of the EO polymerization kinetics—this emerging class of polymers embodies a powerful platform for bio‐ and drug conjugation.     

Poly(ethylene glycol) (400) as superior solvent medium against ionic liquids for catalytic hydrogenations with PtO2

Adams' catalyst in poly(ethylene glycol) (PEG) (400) has been found to be a superior solvent over the ionic liquids by severalfold in promoting the hydrogenation of various functional groups. Both the catalyst and PEG were recycled efficiently over 10 runs without loss of activity, and substrate cross contamination was not observed despite a change in the substrate four times.     

Poly(ethylene glycol) gradient for biochip development

A novel method of producing a poly(ethylene glycol) (PEG)-based gradient matrix that varies gradually in thickness from 0 to 500 A over a distance of 5-20 mm is presented. The gradient matrix is graft copolymerized from a mixture of PEG methacrylates onto organic thin films providing free radical polymerization sites initiated by UV irradiation at 254 nm. The films used as grafting platforms consist of either a spin-coated cycloolefin polymer or a self-assembled monolayer on planar gold. The thickness/irradiation gradient is realized by means of a moving shutter that slowly uncovers the modified gold substrate. The structural and functional characteristics of the gradient matrix are investigated with respect to thickness profile, degree of carboxylation, and subsequent immobilization of two model proteins of different sizes and shapes. These characteristics are studied with ellipsometry and infrared reflection-absorption microscopy using a grazing angle objective. It is revealed that the relatively small carboxylation agent used offers homogeneous activation throughout the gradient, even in the thick areas, whereas the diffusion/interpenetration and subsequent immobilization of large proteins is partially hindered. This is crucial information in biosensor design that can be easily obtained from a gradient experiment on a single sample. Moreover, the partially hindered protein interpenetration, the marginal swelling upon hydration, and the unspecific nature of the graft polymerization suggest a matrix growth mechanism that favors the formation of a bushlike polymer structure with a certain degree of cross linking.     

Poly(ethylene glycol)-supported α,α,α-trifluoroacetophenone in dioxirane mediated alkene epoxidation reactions

Poly(ethylene glycol) (PEG) was used for the immobilization of α,α,α-trifluoroacetophenone and the utility of this supported ketone has been examined in dioxirane mediated epoxidation of alkenes. The PEG-ketone reagent was found to be an effective homogeneous catalyst for the epoxidation of a variety of alkenes in the presence of Oxone^® and was readily recovered from the reaction mixtures and reused.     

聚乙烯/聚乙二醇共混物中极性组分的表面富集

采用衰减全反射傅立叶变换红外光谱(FTIR-ATR)和扫描电子显微镜研究了极性组分聚乙二醇在聚乙烯／聚乙二醇共混物中的表面富集特性。研究结果认为不同组分表面自由能的差异以及聚乙烯基体的结晶异相排斥作用是导致聚乙二醇组分向共混物表面富集的主要驱动力，而极性组分相区的大小和分布则是影响其选择性迁移过程的重要因素。因此，可以通过添加合适相容剂的办法对聚乙二醇组分的表面富集程度进行有效的调控。     

Poly(ethylene glycol)-lipase complexes that are highly active and enantioselective in ionic liquids

Lipase-catalyzed alcoholysis between vinyl acetate and 2-phenyl-1-propanol was investigated in dialkylimidazolium-based ionic liquids. Although native lipase powder exhibited very low activity in an ionic liquid, forming a poly(ethylene glycol)(PEG)-lipase complex improved the lipase activity in the ionic liquid. The activity of the PEG-lipase complex was higher in ionic liquids than in common organic solvents (n-hexane, isooctane and dimethylsulfoxide). Fluorescence measurements using 4-aminophthalimide revealed that the ionic liquids were more hydrophilic than the organic solvents used for non-aqueous enzymology. A kinetic study of lipase-catalyzed alcoholysis in an ionic liquid ([Bmim][PF6]) revealed that the Michaelis constant (Km) for 2-phenyl-1-propanol in the ionic liquid was half that in n-hexane, suggesting that the ionic liquid stabilized the enzyme-substrate complex. Finally, we carried out enantioselective alcoholysis of 1-phenylethanol in ionic liquids employing the PEG-lipase complex, and obtained high enantioselectivity, comparable to that in n-hexane.     

Poly(ethylene glycol)-supported TEMPO: an efficient, recoverable metal-free catalyst for the selective oxidation of alcohols

[structure: see text] Poly(ethylene glycol)-supported TEMPO (PEG-TEMPO) has been prepared, and its catalytic activity in the chemoselective oxidation of alcohols with stoichiometric amounts of organic or inorganic oxidants has been investigated. The new metal-free catalyst exhibits high activity and is easily removed from the reaction mixture by filtration. Recycling experiments showed that PEG-TEMPO can be reused up to six times with no loss of catalytic activity.     

Poly(ethylene glycol)-based shape-memory polymers

Poly(ethylene glycol) (PEG) blends photo-curable and thermal activated shape-memory polymers (SMPs), with different activation temperature (T_switch), have been synthesized and characterized. PEG blends with different molecular weights were chain-end functionalized with isocyanate ethyl methacrylate and photo-cured with UV lamp. Degree of cross-linking of the blend network, determined by gel content measurement, resulted as higher than 95%. The thermal and thermomechanical properties of these SMPs PEG blends were characterized by differential scanning calorimetry and dynamic mechanical analysis. The shape-memory properties of the networks were quantified using thermomechanical three-point bending experiments and showed strain fixity rates higher than 99% and a minimum strain recovery ratio of 82%.     

Poly(ethylene glycol) as solvent for transition metal mediated living radical polymerisation

The use of poly(ethylene glycol)(PEG) with low molecular weights as a novel solvent for the transition metal mediated radical polymerisation of methyl methacrylate and styrene is reported. The utilisation of PEG leads to polymerisation kinetics that differ from those observed with more traditional organic solvents. Moreover, the amount of residual copper catalyst in the product is greatly reduced by precipitation of the polymer in ethanol.     

聚L-丙氨酸-聚乙二醇嵌段共聚物纳米胶束的研究

分别以氨基聚乙二醇和氨基聚乙二醇单甲醚为大分子引发剂,采用开环聚合的方法合成了两亲性聚L-丙氨酸-聚乙二醇(PAE)和聚L-丙氨酸-聚乙二醇单甲醚(PAME)两种嵌段共聚物,其结构经1H NMR,IR,DSC,GPC等表征;利用园二色技术研究了其在水溶液中的二级结构,用芘荧光探针技术研究了其胶束的形成及其临界胶束浓度(CMC),利用透射电镜研究了胶束的形态。结果表明,在水溶液中共聚物链以α-螺旋构象形式存在,在一定条件下嵌段共聚物PAE-1,PAE-2,PAME-1和PAME-2能够形成球形的稳定胶束,PAE-1形成胶束的CMC为3.36×10-5mol.L-1,CMC值受嵌段类型和共聚物中聚L-丙氨酸链段含量的影响。     

Micellization and Thermogelation of Poly(ether urethane)s Comprising Poly(ethylene glycol) and Poly(propylene glycol)

A series of multiblock poly(ether urethane)s comprising poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) segments were synthesized. Their aqueous solutions exhibited thermogelling behavior at critical gelation concentrations (CGC) ranging from 8 to 12 wt%. The composition and structural information of the copolymers were studied by GPC and ¹H NMR. The critical micellization concentration (CMC) and thermodynamic parameters for micelle formation were determined at different temperatures. The temperature response of the copolymer solutions were studied and found to be associated with the composition of the copolymers.