Fluorimetric study of the interaction between human serum albumin and quinolones-terbium complex and its application

A highly sensitive spectrofluorimetric method is proposed for determination of human serum albumin (HSA) and some quinolone drugs. Using quinolones-terbium (Tb3+) complex as a fluorescent probe, in the buffer solution of pH 7.8, HSA can remarkably enhance the fluorescence intensity of the quinolones-Tb3+ complex at 545 nm and the enhanced fluorescence intensity of Tb3+ ion is in proportion to the concentration of HSA and quinolone drugs. Optimum conditions for the determination of HSA were also investigated. The linear ranges and limits of detection are 8.0 x 10(-9) to 8.0 x 10(-8) mol L(-1), 4.20 x 10(-9) mol L(-1) (for HSA); 1.0 x 10(-6) to 4.0 x 10(-6) mol L(-1), 1.87 x 10(-8) mol L(-1) (for norfloxacin) and 1.0 x 10(-7) to 1.0 x 10(-6) mol L(-1), 4.82 x 10(-8) mol L(-1) (for enoxacine), respectively. This method is simple, practical and relatively free interference from coexisting substances, as well as much more sensitive than most of the existing assays.     

Chemiluminescence of tryptophan and histidine in Ru(bpy)3(2+)-KMnO4 aqueous solution

Amino acids with different chemical structures have different abilities in terms of increasing the intensity of chemiluminescence (CL) of tris(2,2'-bipyridine)ruthenium(II) [Ru(bpy)3(2+)]. In a flow system, CL caused by the reaction between Ru(bpy)3(3+) and 15 amino acids was observed, but only tryptophan (Trp) and histidine (His) enhanced the intensity obviously, and so the CL of Trp and His and their molecular groups was studied. A calculation of the ionization potentials (IPs) of their N atom indicated that the CL intensities of these compounds depended on their IPs. In addition, the flow system was used for the determination of Trp and His, and the detection limits were 3 x 10(-8) mol L(-1) for His and 2.5 x 10(-9) mol L(-1) for Trp. The calibration curves for the two amino acids were 1.0 x 10(-7) to 5.0 x 10(-3) mol L(-1) for His and 1.0 x 10(-8) to 1.0 x 10(-4) mol L(-1) for Trp. The proposed approach was applied to the determination of His in Ganoderma.     

Determination of lomefloxacin by terbium sensitized chemiluminescence method

A simple, rapid and sensitive chemiluminescence (CL) method was proposed for the determination of lomefloxacin (LFX). This method is based on the fact that the weak CL from the redox reaction of Ce(4+)-Na(2)SO(3) can be greatly enhanced by the complex of Tb(3+)-LFX. The CL intensity is directly proportional to the concentration of LFX in the range 2.0x10(-9) to 1.0x10(-5) mol L(-1), and the detection limit (S/N=3) is 1.1x10(-9) mol L(-1). This method has been applied to the detection of LFX in pharmaceutical preparation, urine and serum samples. Recoveries were in the range 95-105%. The CL mechanism of Ce(4+)-Na(2)SO(3)-Tb(3+)-LFX system was proposed to be an intermolecular energy transfer from excited SO(2)(*) to LFX and an intramolecular energy transfer from LFX to Tb(3+).     

A simple and rapid flow-injection chemiluminescence method for the determination of noscapine with Ru(phen)3(2+)-Ce(IV) system

A new flow injection chemiluminescence (CL) system was used for the determination of noscapine. This technique is based on the reduction effect of noscapine on the Ru(phen)3(3+), which is produced by reaction between Ru(phen)3(2+) and acidic Ce(IV) solutions, and this rapid reduction produces strong CL. Calibration plots were linear over the range of 3.0 x 10(-7) - 2.0 x 10(-6) mol L(-1) and 2.0 x 10(-6) - 2.0 x 10(-4) mol L(-1). The CL intensity was so high, that it is able to produce a detection limit of 6.6 x 10(-8) M noscapine (3sigma). The relative standard deviation of 2.0 x 10(-6) M noscapine was 1.0% (n=10). The proposed method was successfully applied for the flow injection determination of noscapine in cough and Tonin syrup samples. The results of real sample analyses show good recovery percentages (97.3-102.4%). The minimum sampling rate was 100 samples per hour.     

Flow-injection determination of trace amounts of dopamine by chemiluminescence detection

A flow-injection analysis (FIA) for the determination of dopamine has been developed. The method is based on the inhibition effect of dopamine on the iron(II)-induced chemiluminescence (CL) of 10,10'-dimethyl-9,9'-biacridinium dinitrate (lucigenin). The presence of a non-ionic surfactant, polyoxyethylene (23) lauryl ether (Brij 35), caused an increase in the inhibition effect. The present method allows the determination of dopamine over the range 1x10(-8)-2x10(-7) mol dm(-3). The relative standard deviation was 0.7% for eight determinations of 6x10(-8) mol dm(-3) dopamine. The detection limit (S/N=3) was 2x10(-9) mol dm(-3) with the sampling rate of 40 samples h(-1). The effect of other catecholamines and compounds of similar structure on the lucigenin CL reaction was studied: quinone, hydroquinone, norepinephrine, pyrocatechol and l-dopa suppressed the CL intensity.     

Flow-injection chemiluminescence determination of chlorinated isocyanuric acids

A rapid and sensitive flow-injection chemiluminescence method is described for the determination of dichloro- and trichloroisocyanuric acids based on the chemiluminescence produced during their reaction with luminol in alkaline medium. The effects of analytical and flow-injection variables on these chemiluminescence systems and determination of both oxidants are discussed. The optimized method yielded 3sigma detection limits of 8x10(-8) and 5x10(-8) mol L(-1) for the sodium dichloroisocyanurate and trichloroisocyanuric acid, respectively. The optimum conditions were found to be as follows: NaOH, 1x10(-1) mol L(-1); luminol, 5x10(-3) mol L(-1); KI, 2x10(-3) mol L(-1) and flow rate, 3.5 mL min(-1).     

基于纳米TiO2的化学发光法检测铁(Ⅱ)

铁(Ⅱ)能在具有催化活性的纳米TiO2表面产生化学发光辐射,表面活性剂十六烷基三甲基溴化铵(CTAB)的存在能显著增敏此发光强度。此外,纳米氧化钛也能增强Fenton反应的化学发光强度,据此,建立了纳米TiO2-CTAB-Fenton化学发光新体系检测铁(Ⅱ)的新方法。在优化条件下,亚铁离子在1.0×10-8~1.0×10-6mol/L浓度范围内与其化学发光强度呈现良好的线性关系,对1.0×10-7mol/L浓度的亚铁离子平行测定5次,相对标准偏差为3.9%,检出限为4.0×10-9mol/L。文中还对化学发光反应机理进行了初步探讨。     

Chemiluminescence of cobalt(II)-hydrogen peroxide-hydrogencarbonate in the absence of luminescent reagents

A novel chemiluminescence (CL) system, cobalt(II)-hydrogen peroxide-hydrogencarbonate without luminescent reagents, was described. When cobalt(II) was injected into mixed solution of 0.4 mol l(-1) hydrogencarbonate and 0.01 mol l(-1) hydrogen peroxide in a flow injection system, CL occurred, which was significantly enhanced when rhodamine B coexisted. The CL emission intensity was found correlation with the concentration of cobalt(II) in the range of 2.0x10(-9)-1.0x10(-5) mol l(-1) with a detection limit of 1.2x10(-9) mol l(-1) cobalt(II). The relative standard derivative (RSD) for 5.0x10(-7) mol l(-1) cobalt(II) was 1.6% based on nine repetitive measurements. In addition to cobalt(II), other metal ions were also investigated, and only chromium(III) gave out measurable CL emission. The possible mechanism was discussed based on the CL emission spectrum.     

Determination of albumin in biological fluids by flow injection analysis using the peroxyoxalate chemiluminescent system in micellar medium

A novel chemiluminescence (CL) method for the determination of papaverine (PAP) has been developed by combining the flow injection technique and its sensitizing effect on the weak CL reaction between sulfite and acidic permanganate. A mechanism for the CL reaction has been proposed on the basis of fluorescent and chemiluminescence spectra. The CL response is proportional to the concentration of PAP over the range 0.2-10 micro mol L(-1). The detection limit of PAP is 0.10 micro mol L(-1) (3 s) with a relative standard deviation (RSD) of 2.0% for 10 repetitive determinations of 1.0 micro mol L(-1) PAP. Interferences from other alkaloids in the opium, such as morphine and codeine, are negligible except that of narcotine. The method has been satisfactorily used for the determination of PAP in injections and compound liquorice tablets.     

Determination of trace aluminum (III) using a novel cerium (IV)-calcein chemiluminescence detection

A simple, sensitive and selective chemiluminescence (CL) method was developed for the direct determination of aluminum (Al). This method is based on that the weak CL of cerium (IV)-calcein can be greatly enhanced by Al(III). The calibration curve was linear over the range 2.0 x 10(-10) to 4.0 x 10(-8)g mL(-1) with a detection limit of 8 x 10(-11)g mL(-1) (3sigma). The R.S.D. was 2.5% by 11 replicated determinations of 1.0 x 10(-9)g mL(-1) Al(III). The proposed method has been used to determine the concentration of Al(III) in real water samples with satisfactory results. The mechanism of the CL reaction was also discussed.     

Flow-injection electrogenerated chemiluminescence detection of hydrazine based on its in-situ electrochemical modification at a pre-anodized platinum electrode

In this paper. it was found that the enhancing effect of hydrazine on the weak electrogenerated chemiluminescence (ECL) signal of the electrooxidation of luminol at a pre-anodized platinum electrode was stronger than that of hydrazine at a bare platinum electrode. Based on this finding and the combination of this finding with a flow-injection technique, a novel, sensitive and selective ECL method for hydrazine was developed. Under the optimum experimental conditions, the relative ECL intensity was linear with hydrazine concentration over the range 2.0 x 10(-8) - 5.0 x 10(-5) mol L(-1), with a detection limit of 6.0 x 10(-9) mol L(-1).     

流动注射-鲁米诺-高碘酸钾-过氧化氢体系的化学发光行为及其应用

详细研究了流动注射－鲁米诺－高碘酸钾－过氧化氢体系化学发光行为，给出了反应的最佳条件。拟定了一种化学发光测定过氧化氢的新方法。方法的检测限为３．０Ｘ１０－８ｍｏｌ／ＬＨ２Ｏ２；线性范围为２．０×１０－７～６．０×１０－４ｍｏｌ／Ｌ。评价了该体系的应用前景。     

Chemiluminescence determination of sulfite in sugar and sulfur dioxide in air using Tris(2,2'-bipyridyl)ruthenium(II)-permanganate system

A chemiluminescence (CL) detection for the determination of sulfite using the reaction of Ru(bipy)(3)(2+) (bipy=2,2'-bipyridyl) -SO(3)(2-)-KMnO(4) is described. The concentration of sulfite is proportional to the CL intensity from 5.0x10(-8) to 1.25x10(-4) mol l(-1). The limit of detection is 2.5x10(-8) mol l(-1) and the relative standard deviation is 4.9% for the 2x10(-5) mol l(-1) sulfite solution in six repeated measurements. This method has been successfully applied to the determination of sulfite in sugar and sulfur dioxide in air by using triethanolamine (TEA) as the absorbent material.     

A sensitive and rapid immunoassay for quantification of CA125 in human sera by capillary electrophoresis with enhanced chemiluminescence detection

In this paper we have presented a sensitive and rapid immunoassay (IA) method by capillary electrophoresis with an enhanced chemiluminescence detection system (CE-CL) based on the catalytic effects of horseradish peroxidase (HRP) on the luminol-hydrogen peroxide reaction. The conditions for the CL reaction and electrophoresis were systematically investigated using HRP as a model sample. The linear range from 2.5 x 10(-11) to 1.0 x 10(-9) mol/L (R = 0.999), and the detection limit of 1.0 x 10(-12) mol/L (signal-to-noise ratio = 3) for HRP were achieved using para-iodophenol as CL enhancer. The relative standard deviations of the migration time and peak area for 5.0 x 10(-10) mol/L HRP (n = 7) were 0.26 and 4.8%, respectively, using a CE system with a home-built CL detector. Under the optimal condition, the HRP-labeled CA125 antibody (Ab) and the Ab-antigen complex were well separated within 4 min by CE using a high-pH buffer (pH 10.20). The assay was successfully used for quantification of CA125 in human sera from health controls and patients associated with ovarian cancer, and the recoveries of the standard addition experiments were 93-109%. Our primary results demonstrated that IA based on CE-CL detection is a powerful tool for clinical diagnosis combined with these commercial IA kits.     

Determination of serum albumin in the presence of poly(diallyldimethylammonium chloride) by resonance light scattering technique

By means of the resonance light scattering (RLS) technique, a new method was developed to determine the bovine serum albumin (BSA) and human serum albumin (HSA) by the interaction of serum albumin with poly(diallyldimethylammonium chloride) (PDDA). At Tris-NaOH buffer solution, the RLS intensity of serum albumin at the wavelength 320, 550 and 590 nm was obviously enhanced in the presence of PDDA. The influences of some experimental factors, including incubation time, addition sequence of reagents, pH value, concentration of PDDA and foreign substances, on the enhancement of the RLS intensity were examined. The optimum conditions of the experiment were selected. Under the selected experimental condition, the enhanced RLS intensities were directly proportional to the concentrations in the range of (0.0250-2.75)x10(-6) mol/L for BSA and (0.0235-1.17)x10(-6) mol/L for HSA. The detection limits (S/N=3) were 8.40x10(-9) mol/L for BSA and 7.39x10(-9) mol/L for HSA. The synthetic samples were analysed and the results obtained were satisfactory.     

Evaluation of luminol-H(2)O(2)-KIO(4) chemiluminescence system and its application to hydrogen peroxide, glucose and ascorbic acid assays

A novel chemiluminescence (CL) system was evaluated for the determination of hydrogen peroxide, glucose and ascorbic acid based on hydrogen peroxide, which has a catalytic-cooxidative effect on the oxidation of luminol by KIO(4). Hydrogen peroxide can be directly determined by luminol-KIO(4)-H(2)O(2) CL system. The detection limit was 3.0x10(-8) mol l(-1) and the calibration graph was linear over the range of 2.0x10(-7)-6.0x10(-4) mol l(-1). The relative standard deviation of H(2)O(2) was 1.1% for 2.0x10(-6) mol l(-1) (N=11). Glucose was indirectly determined through measuring the H(2)O(2) generated by the oxidation of glucose in the presence of glucose oxidase at pH 7.6. The present method provides a source for H(2)O(2), which, in turn, coupled with the luminol-KIO(4)-H(2)O(2) CL reaction system. The CL was linearly correlated with glucose concentration of 0.6-110 mug ml(-1). The relative standard deviation was 2.1% for 10 mug ml(-1) (N=11). Detection limit of glucose was 0.08 mug ml(-1). Ascorbic acid was also indirectly determined by the suppression of luminol-KIO(4)-H(2)O(2) CL system. The calibration curve was linear over the range of 1.0x10(-7)-1.0x10(-5) mol l(-1) of ascorbic acid. The relative standard deviation was 1.0% for 8.0x10(-7) mol l(-1) (N=11). Detection limit of ascorbic acid was 6.0x10(-8) mol l(-1). These proposed methods have been applied to determine glucose, ascorbic acid in tablets and injection.     

Determination of catecholamines by CE with direct chemiluminescence detection

A rapid and sensitive method to detect three catecholamines, isoprenaline, epinephrine, and dopamine, by CE coupled with direct luminol-potassium periodate chemiluminescence (CL) detection is described. The conditions for CE separation and CL reaction were systematically optimized. Under the optimum conditions, the baseline separation of three catecholamines was achieved within 6.5 min. The LODs obtained in standard solution were 5.3 x 10(-8 )mol/L for isoprenaline, 4.7 x 10(-8 )mol/L for epinephrine, and 1.5 x 10(-7 )mol/L for dopamine. The RSD of the migration time and peak area were less than 1.8 and 3.6% (n = 5), respectively. The present method was applied to the determination of the dopamine in urine samples of cigarette smokers and nonsmokers. The results obtained indicate that there is a close relationship between the content of dopamine in human urine and the amount of cigarettes smoked daily; the level of dopamine in smokers is higher than in nonsmokers.     

Chemiluminescence determination of cefotaxime sodium with flow-injection analysis of cerium (IV)-rhodamine 6G system and its application to the binding study of cefotaxime sodium to protein with on-line microdialysis sampling

A simple, sensitive and rapid flow-injection chemiluminescence (CL) method has been developed for the determination of cefotaxime sodium based on the chemiluminescence reaction of cefotaxime sodium with ceric sulfate and rhodamine 6G in nitric acid solution. The concentration of cefotaxime sodium was proportional with the CL intensity in the range of 4×10(-8)-8×10(-6) mol L(-1). The detection limit (signal-to-noise ratio=3) was 1×10(-8) mol L(-1). Coupled to the technique of on-line microdialysis sampling, this method was successfully applied to study cefotaxime sodium-protein interaction. The drug and protein were mixed in different molar ratios in Ringer's solution, pH 7.4, and incubated at 37°C in a water bath. The microdialysis probe was utilized to sample the mixed solution at a perfusion rate of 5 μL min(-1) and the recovery of cefotaxime sodium under experimental condition was 16.2%. The data obtained by the present Microdialysis-Flow Injection Analysis-CL method was analyzed with the Scatchard analysis and Klotz plot. The estimated association constant (K) and the number of the binding sites (n) on one of BSA molecule were 5.94×10(4) M(-1) and 1.29 (Klotz equation), respectively.     

基于纳米CeO_2增敏鲁米诺化学发光法测定对乙酰氨基酚的研究

基于碱性条件下,CeO_2纳米粒子能够有效增敏鲁米诺-KMnO_4体系的化学发光,并结合流动注射技术建立了一种对乙酰氨基酚测定的新方法。实验研究了影响化学发光检测信号的多种因素,并初步探讨了可能的化学发光机理。在最佳实验条件下,对乙酰氨基酚浓度在1.0×10-7~5.0×10-5mol/L范围内与相对化学发光强度的抑制值呈良好的线性相关,相关系数(r2)为0.996 4,检出限(3σ)为3.3×10-8mol/L。对5.0×10-6mol/L的对乙酰氨基酚溶液平行测定11次,计算得相对标准偏差(RSD)为0.3%。该法用于银翘片中对乙酰氨基酚含量的测定,回收率为98.0%;对尿液的加标回收率为97.9%~98.7%,结果满意。     

Flow injection analysis of ketoprofen based on the order transform second chemiluminescence reaction

This paper explores an order-transform-second-chemiluminescence (OTSCL) method combining the flow injection technique for the determination of ketoprofen. When ketoprofen solution was injected into the mixture after the end of the reaction of alkaline luminol and sodium periodate or sodium periodate solution was injected into the reaction mixture of ketoprofen and alkaline luminol, a new chemiluminescence (CL) reaction was initiated and strong CL signal was detected. A mechanism for the OTSCL has been proposed on the basis of the chemiluminescence kinetic characteristic, UV-visible absorption and chemiluminescent spectra. Under optimal experimental conditions, the CL response is proportional to the concentration of ketoprofen over the range of 2.0×10(-7) to 1.0×10(-5)mol/L with a correlation coefficient of 0.9950 and a detection limit of 8.0×10(-9)mol/L (3σ). The relative standard deviation for 11 repetitive determinations of 1.0×10(-6)mol/L ketoprofen is 2.9%. The utility of this method was demonstrated by determining ketoprofen in pharmaceutical formulations without interference from its potential impurities.