Interfacial tension and electrocapillary measurements of the room temperature ionic liquid/aqueous interface

The surface and aqueous interfacial tensions for a series of water-immiscible room-temperature ionic liquids (RTILs) have been measured. The RTILs used in this study were based on 1-alkyl-3-methylimidazolium cations (Cnmim, n=6, 8, 10, and 12) and bis(perfluoromethylsulfonyl)imide (BMSI) and bis(perfluoroethylsulfonyl)imide (BETI) anions. It was found that the surface tensions of the RTILs increased with an increasing cation chain length similar to the behavior of n-alkanes. Interfacial tensions of the RTILs with aqueous solutions, however, were found to decrease with the cation chain length, which has been attributed to the increased surface activity of the longer chain cations. We have also demonstrated the first use of electrocapillary measurements to study the polarizable RTIL/aqueous interfaces. From the electrocapillary data, the potential of zero charge (PZC) for these RTIL/aqueous interfaces was determined, as well as the relative surface excess charge and capacitance. The PZC was found to be dependent upon the structure of the anions and cations with PZC values ranging from -357 mV for C6mimBETI and -161 mV for C10mimBMSI. The electrocapillary results also show that the cations of the RTIL are becoming increasingly surface-active as the alkyl chain on the cation is lengthened, thereby modulating the interfacial potential.     

Role of alkyl substituent in room temperature ionic liquid on the electrochemical behavior of uranium ion and its local environment

A systematic study was carried out to understand the effect of structural modification of C_nmim⁺ moiety of C_nmimBr (n = 6, 8 or 10) on the electrochemical behavior of uranium. The cyclic voltammetric study of the above room-temperature ionic liquids (RTIL) media revealed that with increase in the chain length the electrochemical window extended more towards the negative potential. This resulted in the possibility of conversion of U(VI) to U(III) or even possibly to, U metal via U(IV) (as UO₂) when n ≥ 10. The diffusion coefficient of U(VI) was found to decrease from n = 6 to 8 to 10 due to the increasing order of viscosity of the RTIL. As a consequence, the activation energy was found to follow reverse order i.e. E _act(C₆mimBr) < E _act(C₈mimBr) < E _act(C₁₀mimBr). The conversion of UO₂ ²⁺ to UO₂ was found to be quasi reversible and also exothermic while the entropy was found to decrease due to the reduction reaction. An UV–Vis spectroscopic study was also carried out to understand the local environment around uranium in aqueous and RTIL media. Among several cationic and anionic species, the predominance of UO₂Cl₄ ^2? in 7 M HCl with D_4h coordination symmetry was observed. The decrease in symmetric stretching frequency of UO₂ ²⁺ in RTILs in comparison with aqueous system indicates that the bond strength of UO₂ ²⁺ in aqueous is less than that of UO₂ ²⁺ in RTILs.     

Activity and stability of horseradish peroxidase in hydrophilic room temperature ionic liquid and its application in non-aqueous biosensing

The activity and stability of horseradish peroxidase (HRP) were investigated in a hydrophilic room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) by electrochemical methods. Although no detectable activity exhibited in anhydrous [bmim][BF₄], HRP was active in the presence of a small amount of water (4.53%, v/v). And its activity can be improved by immobilization in agarose hydrogel. The immobilized HRP possesses excellent activity at 65 °C. It remained 80.2% of its initial activity after being immersed for 10.5 h in an aqueous mixture of [bmim][BF₄] with some hydrogen peroxide (H₂O₂) under room temperature, implying extremely high stability. Moreover, the immobilized HRP was found to be very sensitive and stable in H₂O-containing [bmim][BF₄] for the detection of H₂O₂, with a wide linear range of 6.10 × 10⁻⁷ to 1.32 × 10⁻⁴ mol l⁻¹ and low detection limit of 1.0 × 10⁻⁷ mol l⁻¹.     

The formal potentials and electrode kinetics of the proton/hydrogen couple in various room temperature ionic liquids

The Hydrogen evolution reaction has been quantitatively investigated at a Pt electrode in series of room temperature ionic liquids vs. Ag/Ag(+) redox couple. The measured formal potentials of the H(2)/H(+) (HNTf(2)) redox couple in each RTIL reveals a dependence on the nature of anion, suggesting significant interaction between proton and anion.     

A comparative study of the complexation of Am(III) and Eu(III) with TODGA in room temperature ionic liquid

On the growing awareness of the environmental impact associated with the use of volatile organic diluents, room temperature ionic liquid gained world-wild acceptance as environmentally benign diluents for actinide partitioning. The observed unusual behavior of less extraction efficiency of Eu with TODGA in RTIL in comparison with that of Am-TODGA was addressed in this paper. The stoichiometry of Am-TODGA complex was found to be 1:2 while that of Eu-TODGA was 1:1. More the ligand molecules associated in the metal ligand complex, the organophilicity of the complex will be more and the solubility of the metal–ligand complex in RTIL will be more which reflects in the higher distribution ratio for Am. In RTIL both Am and Eu showed slower kinetics of extraction with TODGA which can be attributed to the high viscosity coefficient of RTIL compared to the molecular diluents. The observed slower kinetics of extraction was quantified and found to follow first order kinetics with the rate constant of 5.5 × 10^?4 s^?1. The formation constant of Am-TODGA complex was found to be more (4.18 × 10⁸ M^?1) than Eu-TODGA complex (3.31 × 10⁸ M^?1) in RTIL. The parameters viz. diffusion coefficient, activation energy for Eu(III)/Eu(II) were determined and found to be 3.08 × 10^?8/cm² s^?1 (at 303 K) and 39.34 kJ mol^?1 respectively. The thermodynamic parameters ΔG, ΔH and ΔS for the reaction were evaluated using the linear regression of the plot of E ^0* versus T. The redox reaction was found to be exothermic with decrease in entropy value.     

Arsenic extraction and speciation in carrots using accelerated solvent extraction, liquid chromatography and plasma mass spectrometry

Arsenic present in freeze-dried carrots was extracted using accelerated solvent extraction (ASE). Several parameters, including selection of the dispersing agent, extraction time, number of extraction cycles, particle size and extraction temperature, were evaluated to optimize the ASE method. Filtering and treatment with C-18 SPE cartridges were also evaluated as part of the sample preparation procedure before speciation analysis. The method was validated by spiking single arsenical and mixed arsenical standards on the dispersing agent and on portions of freeze-dried carrot prior to extraction. LC-ICP-MS was used to determine individual arsenic species in the carrot extracts. A weak anion-exchange column was used for the separation of As(III), As(v), monomethylarsonic acid (MMA), dimethylarsinic acid and arsenobetaine. Optimized sample preparation conditions were applied to the extraction of arsenic in nine freeze-dried carrot samples. Total arsenic concentration in the carrot samples ranged from less than 20 ng g(-1) to 18.7 microg g(-1), dry mass. Extraction efficiency, defined as the ratio of the sum of individual arsenic species concentrations to total arsenic, ranged from 80 to 102% for freeze-dried carrots with arsenic concentrations greater than the limit of quantitation. Inorganic As(III) and As(v) were the only species found in samples that contained less than 400 ng g(-1) total arsenic. MMA and an unidentified arsenic compound were present in some of the samples with higher total arsenic content.     

The hydrogen evolution reaction in a room temperature ionic liquid: mechanism and electrocatalyst trends

The kinetics and mechanism of the proton reduction reaction in the room temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C(2)mim][NTf(2)]) was studied at gold, molybdenum, nickel, titanium and platinum electrodes. Significant differences in electrochemical rate constants were observed between the different metals and with the corresponding processes in aqueous solution. The hydrogen evolution mechanism was consistent at all five metals in the ionic liquid, in stark contrast to the known behaviour in aqueous systems.     

Direct electrochemistry of hemoglobin on a room temperature ionic liquid modified electrode and its electrocatalytic activity for the reduction of oxygen

A room temperature ionic liquid (RTIL), 1-ethyl-3-methyl imidazolium tetrafluoroborate ([EMIm][BF₄]), was successfully immobilized on the surface of a basal plane graphite (BPG) electrode through silica sol and Nafion film to form a sol/RTIL/Nafion modified electrode. Direct electrochemistry of hemoglobin (Hb), which was adsorbed on the surface of sol/RTIL/Nafion modified electrode, was investigated. The results from cyclic voltammetry (CV) suggested that Hb could be tightly adsorbed on the surface of the electrode. A couple of well-defined and quasi-reversible CV peaks of Hb can be observed in a phosphate buffer solution (pH 7.0). RTIL shows an obvious promotion for the direct electro-transfer between Hb and electrode. Hb adsorbed on electrode surface exhibits an obvious electrocatalytic activity for the reduction of oxygen O₂. The reduction peak currents were proportional linearly to the concentration of oxygen in the range 0.14–1.82 μM. A third generation biosensor based on RTIL can be constructed for the determination of O₂.     

Highly reversible lithium metal secondary battery using a room temperature ionic liquid/lithium salt mixture and a surface-coated cathode active material

For the purpose of realizing high-voltage, high-capacity, long-life and safe rechargeable batteries, a lithium secondary battery that uses high-voltage stable ZrO2-coated LiCoO2 cathode powder and a nonvolatile high-safety room temperature ionic liquid was fabricated.     

Effect of nitrate, perchlorate, and water on uranyl(VI) speciation in a room-temperature ionic liquid: a spectroscopic investigation

Room-temperature ionic liquids form potentially important solvents in novel nuclear waste reprocessing methods, and the solvation, speciation, and complexation behaviors of lanthanides and actinides in these solvents are of great current interest. In the study reported here, the coordination environment of uranyl(VI) in solutions of the room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf(2)N]) containing perchlorate, tetrabutylammonium nitrate, and water was investigated using Raman, ATR-FTIR, and NMR spectroscopies in order to better understand the role played in uranyl(VI) solution chemistry in room-temperature ionic liquids by water and other small, weakly complexing ligands. The (2)H NMR chemical shift for water in a solution of uranyl perchlorate hexahydrate in [EMIM][Tf(2)N] appears at 6.52 ppm, indicating that water is coordinated to uranyl(VI). A broad ν(OH) stretching mode at 3370 cm(-1) in the ATR-FTIR spectrum shows that this coordinated water is engaged in hydrogen bonding with water molecules in a second coordination sphere. A significant upfield shift in the (2)H NMR signal for water and the appearance of distinct ν(as)(HOH) (at 3630 cm(-1)) and ν(s)(HOH) (at 3560 cm(-1)) vibrational bands in the ATR-FTIR spectra show that coordinated water is displaced by nitrate upon formation of the UO(2)(NO(3))(2) and UO(2)(NO(3))(3)(-) complexes. The Raman spectra indicate that perchlorate complexed to uranyl(VI) is also displaced by nitrate. Our results indicate that perchlorate and water, though weakly complexing ligands, do have a role in uranyl(VI) speciation in room-temperature ionic liquids and that Raman, infrared, and NMR spectroscopies are valuable additions to the suite of tools currently used to study the chemical behavior of uranyl(VI)-ligand complexes in these solvents.     

Electrochemical behavior of hexafluoroniobate, heptafluorotungstate, and oxotetrafluorovanadate anions in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide room temperature ionic liquid

Electrochemical behavior of hexafluoroniobate (Nb(V)F₆⁻), heptafluorotungstate (W(VI)F₇⁻), and oxotetrafluorovanadate (V(V)OF₄⁻) anions has been investigated in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (BMPyrTFSA) ionic liquid at 298 K by means of cyclic voltammetry and chronoamperometry. Cyclic voltammograms at a Pt electrode showed that Nb(V)F₆⁻ anion is reduced to Nb(IV)F₆²⁻ by a one-electron reversible reaction. Electrochemical reductions of W(VI)F₇⁻ and V(V)OF₄⁻ anions at a Pt electrode are quasi-reversible and irreversible reactions, respectively, according to cyclic voltammetry. The diffusion coefficients of Nb(V)F₆⁻, W(VI)F₇⁻ and V(V)OF₄⁻ determined by chronoamperometry are 1.34 × 10⁻⁷, 7.45 × 10⁻⁸ and 2.49 × 10⁻⁷ cm² s⁻¹, respectively. The Stokes radii of Nb(V)F₆⁻, W(VI)F₇⁻, and V(V)OF₄⁻ in BMPyrTFSA have been calculated to be 0.23, 0.38, and 0.12 nm, from the diffusion coefficients and viscosities obtained.     

Measurements of differential capacitance in room temperature ionic liquid at mercury,glassy carbon and gold electrode interfaces

Differential capacitances were measured in 1-propyl-3-methylimidazolium tetrafluoroborate (PMIBF₄) ionic liquid at three different electrode substrates (Hg, GC (glassy carbon) and Au) as a function of potential. Essentially different capacitance–potential curves were obtained at different electrodes. From the parabolic electrocapillary curve measured at dropping Hg electrode in PMIBF_4, the potential of zero charge (PZC) was found to be −0.31 V vs. Ag/AgCl (wire). However, the capacitance–potential curve at Hg electrode was found not to show any valley related to the PZC, whereas at GC and Au electrodes a minimum was observed at 0.29 and −0.51 V, respectively. The results are in disagreement with the recent theoretical study which implies that the capacitance–potential curve should be of bell shape with the maximum value of capacitance at PZC. The parabolic capacitance–potential curve similar to those obtained in inorganic molten salts was also observed for the first time at GC electrode. Probable causes of the difference in their capacitance–potential curves were also discussed.     

Solvation dynamics and electric field relaxation in an imidazolium-PF6 ionic liquid: from room temperature to the glass transition

Time-resolved phosphorescence spectra and anisotropy of quinoxaline were measured in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-HFP), in its supercooled state near the glass-transition temperature. The solvation dynamics results are compared with the rotational motion of the probe and with the dielectric behavior of the neat ionic liquid. The dynamics in the viscous state are highly dispersive and show a super-Arrhenius temperature dependence, as typical for glass-forming materials. Combined with room-temperature results, solvation dynamics is observed to follow the structural relaxation times in terms of eta/T for more than 10 decades, from subnanoseconds at room temperature to seconds near the glass-transition temperature T(g). The dielectric modulus relaxation follows this trend only for temperatures T > 1.2T(g) and departs significantly from eta/T in the 1.1T(g) > T > T(g) range. This deviation is reminiscent of the enhanced translational diffusion or fractional Stokes-Einstein behavior observed in many fragile supercooled liquids. Because the electric field relaxation in BMIM-HFP includes dc conductivity, this correlation function involves translational motion and thus displays the effect of enhanced diffusivity. A microscopic model is required for rationalizing the decoupling of solvation dynamics from the longitudinal time scales and the limitation of this effect to the viscous regime with T < 1.2T(g).     

Heterogeneous electron transfer kinetics at the ionic liquid/metal interface studied using cyclic voltammetry and scanning electrochemical microscopy

The electrochemical behavior of a redox-active, ferrocene-modified ionic liquid (1-ferrocenylmethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) in acetonitrile and in an ionic liquid electrolyte (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) is reported. Reversible electrochemical behavior was observed in each electrolyte with responses typical of those for unmodified ferrocene observed in each medium. In the ionic liquid electrolyte, the diffusion coefficient of the redox-active ionic liquid increased by a factor of 5 upon increasing the temperature from 27 to 90 degrees C. The kinetics of electron transfer across the ionic liquid/electrode interface were studied using cyclic voltammetry, and the standard heterogeneous electron transfer rate constant, k (0) was determined to be 4.25 x 10 (-3) cm s (-1). Scanning electrochemical microscopy was then also used to probe the heterogeneous kinetics at the interface between the ionic liquid and the solid electrode and conventional kinetic SECM theory was used to determine k (0). The k (0) value obtained using SECM was higher than that determined using cyclic voltammetry. These results indicate that SECM is a very useful technique for studying electron transfer dynamics in ionic liquids.     

Design,synthesis, characterization,and physical property determination of a new ionic liquid: the preparation of triazolo-pyrimidines at room temperature under metal-free conditions

Research on Chemical Intermediates - A new ionic liquid is synthesized, and its chemical structure is characterized by FTIR, 1D NMR and 2D NMR, and mass analyses. The thermal behavior and thermal...     

A kinetic study of the reaction between N,N-dimethyl-p-toluidine and its electrogenerated radical cation in a room temperature ionic liquid.

The reaction between N,N-dimethyl-p-toluidine (DMT) and the radical cation generated through its one-electron oxidation has been studied electrochemically in the room temperature ionic liquid N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [Py14][NTf2]. Kinetic information obtained as linear sweep and cyclic voltammetry collected at 5 microm, 10 microm and 0.3 mm diameter platinum disk electrodes over a range of initial substrate concentrations and scan rates spanning five orders of magnitude was complemented by chronoamperometric measurements designed to probe the rate of diffusion. At the fastest scan rates the homogeneous reactions following the initial electron transfer were effectively out-run, facilitating an assessment of the electrode kinetics using DIGISIM and a validated Nicholson's method. Through digital simulation the voltammetry was then shown to be consistent with a mechanism established for the same reaction in acetonitrile, involving dimerisation of the DMT radicals following an initial and rate-determining proton transfer step. After careful consideration of all parameters, a bimolecular rate constant of (3.4 +/- 1.1) x 10(2) dm3 mol(-1) s(-1) was deduced by fitting the data. This was compared to the equivalent value for acetonitrile and, in light of this, the implications on the viability of ionic liquids for use as alternative mainstream solvents briefly assessed.     

Reduction of aromatic and aliphatic keto esters using sodium borohydride/MeOH at room temperature: a thorough investigation

Reduction of keto esters is a valuable alternative to produce diols. Sodium borohydride/MeOH system at room temperature and short reaction time efficiently reduced α, β, γ, and δ-keto esters having α-keto esters as the most reactive. The ester functionality was reduced effectively due to the presence of oxo group that somehow facilitates the formation of ring intermediate. As expected, the chemoselective experiments showed that ester functionality was not reduced using this system. This study presents a simple, easy, and benign reduction process of various keto esters to its corresponding diols.