(3,5-Diallylisocyanuratomethyl)phosphine oxides and some of their properties

Reaction of sodium diallylisocyanurate with tris(chloromethyl)-, bis(chloromethyl)phenyl-, and (chloromethyl)diphenylphosphine oxides yields, depending on the stoichiometric ratio of the reagents, mono-, bis-, and tris(3,5-diallylisocyanuratomethyl)phosphine oxides.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, 420083 Kazan, Tatarstan, Russia. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2773–2777, December, 1992.     

Synthesis and structure of bis(2-phenylethyl) phosphine selenide

Bis(2-phenylethyl)phosphine selenide was obtained with 86% yield from bis(2-phenylethyl)phosphine and selenium. XRD, IR, UV, and multinuclear NMR spectroscopic studies revealed that the phosphorus atom in the bis(2-phenylethyl)phosphine selenide molecule is four-coordinated irrespective of the phase state (crystals or solution).     

Synthesis and transformations of acyloxy(chloromethyl)phosphonates and acyloxy(chloromethyl)phosphinates

The reactions ofO-phenyl chloromethylphosphonochloridate and bis(chloromethyl)phosphinous chloride with sodium acetate afford the corresponding acyloxyphosphonates and acyloxyphosphinates, which are readily transformed due to disproportionation into pyrophosphonates and pyrophosphinates. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp 2383–2385, November, 1998.     

双2-乙酰基二茂铁合汞的合成及其晶体结构

标题化合物(C24H22Fe2HgO2)3是由2 氯汞基 1 乙酰基二茂铁与乙二胺反应得到的,其结构通过单晶X 射线衍射法确定。其晶体属三斜晶系,P 1空间群,Mr=1964 12,a=10 193(2),b=11 504(2),c=14 413(3) ,α=92 21(3),β=104 12(3),γ=102 67(3)°,V=1591 55(5) 3,Z=1,Dc=2 049mg/cm3,μ=8 583mm-1,F(000)=942,最终偏离因子为R=0 0859,wR=0 2617。该晶体中同时含有meso型及dl型分子,各分子中Hg原子的配位情况不一样。meso分子中的两个二茂铁是相互平行的,而另两分子dl型的二茂铁是相互垂直的。Hg原子以桥联形式连接两个二茂铁部分。meso型与dl型分子通过Hg O弱配位作用相连。     

两个含双(3,5－二甲吡唑基)甲烷配体的铅(II)配合物的合成与结构表征

Reactions of lead（Ⅱ） nitrate or perchlorate with bis（3,5-dimethylpyrazolyl）methane （dmpzm）, produced two new Pb（Ⅱ） chelated complexes [Pb（dmpzm）2X2] （X=NO3^- 1, ClO4^- 2）. Both compounds were structurally characterized by elemental analysis, IR spectroscopy, thermal analysis, and single crystal X-ray diffraction. Both compounds are mononuclear with a distorted square antiprismatic PbN4O4 coordination geometry incorporating a pair of O,O＇-bidentate anions and N,N＇-bidentate dmpzm ligands. In the crystals of 1 or 2, the methyl or methylene groups of dmpzm ligand interact with the oxygen atoms of nitrates or perchlorates to afford intra- and intermolecular hydrogen bonding, thereby forming a two-dimensional network 1 or a three-dimensional structure 2.     

A new rhodium complex with a nitrogen‐containing bis(phosphine oxide) ligand as an efficient catalyst for the hydroformylation of styrene

A new rhodium complex with a nitrogen‐containing bis(phosphine oxide) ligand has been synthesized. The complex was applied to hydroformylation of styrene and displayed high activity and regioselectivity towards the branched aldehyde, which was found to be higher than those of the tertiary bis(phosphine) analogue. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and structure of (bis(3,5-dimethyl-1<Emphasis Type="Italic">H</Emphasis>-pyrazol-1-yl)methane)diiodocobalt(II)

A cobalt(II) iodide complex with bis(3,5-dimethyl-1H-pyrazol-1-yl)methane (L) CoLI₂ has been synthesized, and its single crystals have been obtained. The complex compound was characterized by electron spectroscopy and X-ray diffraction analysis. The compound crystallizes in the monoclinic system (a = 8.4044(4) Å, b = 13.3120(5) Å, c = 14.5824(7) Å; β = 94.7290(10)°; V = 1625.92(13) ų; Z = 4; ρ^calc = 2.112 g/cm³; space group P2₁/m). The structure of the complex is molecular mononuclear. L is a cyclic bidentate ligand; the coordination polyhedron of cobalt is a CoN₂I₂ tetrahedron formed by the nitrogen atoms of the pyrazole fragments L and iodine atoms. The complex has π-π stacking interactions between the pyrazole rings of CoLI₂ molecules, binding the molecules into infinite chains along the b axis.     

含dmpzm配体的锌和镉配合物的合成、结构及性质研究

通过M(NO₃)₂(M=Zn，Cd)和二(3，5-二甲基吡唑)甲烷(dmpzm)的反应，合成了2个锌和镉配合物[M(dmpzm)₂(NO₃)][NO₃](1：M=Zn；2：M=Cd)。配合物1和2经元素分析,红外光谱表征，并经X射线单晶衍射法证实。配合物1属于正交晶系，空间群为Pca2₁，晶体学参数：a=1.625 9(3) nm，b=0.832 10(17) nm，c=2.031 1(4) nm，V=2.747 9(10) nm³，Z=4。配合物2属于正交晶系，空间群为Pca2₁，晶体学参数：a=1.674 36(15) nm，b=0.821 29(7) nm，c=2.048 01(19) nm，V=2.816 3(4) nm³，Z=4。在这2个配合物的阳离子中，金属原子分别与2个dmpzm中的4个N原子及1个NO₃^-中的2个O原子配位，形成略为畸变的八面体构型。配合物1和2的晶体中，NO₃^-的O原子与配体dmpzm中的甲基及亚甲基间存在的C-H…O氢键作用，从而形成了有趣的三维网状结构。此外，还研究了配合物1和2的荧光性质。     

SYNTHESIS AND CHARACTERIZATION OF POLY(PHTHALAZINONE ETHER PHOSPHINE OXIDE)S BY N―C COUPLING REACTION

<正>Based on several unsymmetrical,twist,noncoplanar phthalazinone-containing monomers 2a-2e and an active bis(4-fluorophenyl)phenyl phosphine oxide(BFPPO) monomer,a series of novel poly(phthalazinone ether phosphine oxide)s (PPEPO) was synthesized by anhydrous K_2CO_3 mediated N—C coupling reaction in DMAc.The polymers exhibited good thermal properties with T_gs ranging from 267℃to 306℃and 5%weight loss temperatures in nitrogen higher than 430℃, together with high char yield upon prolonged heating at 800℃(35%—56%).Moreover,the polymers were readily soluble in common organic solvents,such as N-methyl-2-pyrrolidone,chloroform and m-cresol.These polymers had inherent viscosities in the range of 0.45-0.72 dL/g and could be cast into flexible and colorless films by spin coating or casting approach.     

Synthesis and properties of the chain-like polymeric copper (II) complexes bridged by bis(diphenylphosphino oxide)ethane

At room temperature, the chain-like polymeric copper (II) complexes bridged by bis (diphenylphosphino oxide) ethane (dppeO2), [Cu(dppeO2)X2]n[X=Cl(1), Br(2)] have been prepared and characterized by elemental analysis, 31P NMR, TG-DTA and X-ray analysis for [ CuBr2 (dppeO2) ] n The chain is composed of subunits containing tetrahedron coordinated copper (II) atoms. The four-coordinated copper (II) atom is ligated to another four-coordinated copper (II) atom through dppeO2. The coordination sphere of copper(II) atom is completed by two monodentate bromide and two oxygen atoms from bridging dppeO2. Crystal data are as follows: C26-H24CuP2BnO2, 0.50 mm× 0.40 mm×0.40 mm, monoclin-ic, space group: C2/c, λ= 0.07107 nm(Mo Ka), a = 1.2286(2) nm, b=2.0555(8) nm, c = 1.0652(2) nm, β = 97.366(9)°, V = 2.668nm3, Z = 4, Dcalc = 1.628 g·cm-3, R = 0.066; Rw = 0.091.     

Synthesis and structure of a complex of copper(II) bromide with bis(benzotriazol-1-yl)methane

The preparation technique of a complex of copper(II) bromide with bis(benzotriazol-1-yl)methane (L), (Cu₂L₂Br₄)_n, is developed. The compound is studied by single crystal and powder X-ray diffraction and static magnetic susceptibility techniques. According to single crystal XRD data, the complex has a layered structure determined by bidentate bridging coordination of L with N(3) and N(3′) atoms to copper(II). The elementary unit of {Cu₂(μ-Br)₂Br₂} polymer has a binuclear structure. The coordination polyhedron is a trigonal pyramid, and the coordination core is CuN₂Br₃. The temperature dependence of effective magnetic moment is studied within an interval of 2–300 K. The nature of the μ_eff(T) dependence indicates that antiferromagnetic exchange interactions dominate in exchange clusters of the complex with an even number of paramagnetic centers. Original Russian Text Copyright ? 2007 by E. V. Lider, A. S. Potapov, E. V. Peresypkina, A. I. Smolentsev, V. N. Ikorskii, A. I. Khlebnikov, and L. G. Lavrenova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No.3, pp.543–547, May–June, 2007.     

Synthesis and characterization of arylene ether imide reactive oligomers and polymers containing diaryl alkyl phosphine oxide groups

The diamine monomer bis(m-aminophenyl) methyl phosphine oxide (DAMPO) was synthesized via nitration and reduction of diphenyl methyl phosphine oxide. Rigorous purification of this monomer enabled its utilization in the synthesis of high molecular weight poly(ether imide)s. Both thermoplastic materials and thermosetting systems, endcapped with either phthalic or phenylethynylphthalic anhydride, respectively, have been produced. Major emphasis has been placed on polyimides derived from 2,2′-bis(4-(3,4-dicarboxyphenoxy) phenyl) propane dian- hydride, also known as bisphenol-A dianhydride, or BPADA. High molecular weight homo- and copolyimides based on BPADA/DAMPO had glass transition temperature values in the range of 215–223°C, and were totally amorphous. They displayed higher modulus and tensile strength values than the polyetherimide control based on meta-phenylene diamine and also generated high TGA char yields in air. Phenylethynyl crosslinkable materials were effectively cured at 380°C to produce networks that are ductile, very solvent resistant and also generate high char yields, which suggest their possible utilization in fire resistant matrix systems. © 1998 John Wiley & Sons, Ltd.     

PCl3- and organometallic-free synthesis of tris(2-picolyl)phosphine oxide from elemental phosphorus and 2-(chloromethyl)pyridine hydrochloride

In the superbase KOH/H₂O/toluene/phase-transfer catalyst system, 2-picolyl chloride, generated in situ from 2-(chloromethyl)pyridine hydrochloride, reacts with elemental phosphorus at 65–95?°C for 3?h to afford tris(2-picolyl)phosphine oxide in 50% yield. Single crystal X-ray analysis of the latter revealed one polymorph form of this tertiary phosphine oxide.     

Bis(trimethylsilyl)amide und -methanide des Yttriums — Molekülstrukturen von Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl) methyl]yttriat,solvensfreiem Yttrium-tris[bis(trimethylsilyl)amid] sowie dem Bis(benzonitril)-Komplex

Bis(trimethylsilyl)amides and -methanides of Yttrium — Molecular Structures of Tris(diethylether-O)lithium-(μ-chloro)-tris[bis(trimethylsilyl)methyl]yttriate, solvent-free Yttrium Tris[bis(trimethylsilyl)amide] as well as the Bis(benzonitrile) Complex The reaction of yttrium(III) chloride with the three-fold molar amount of LiE(SiMe₃)₂ (E = N, CH) yields the corresponding yttrium derivatives. Yttrium tris-[bis(trimethylsilyl)amide] crystallizes in the space group P3 1c with a = 1 636,3(2), c = 849,3(2) pm, Z = 2. The yttrium atom is surrounded trigonal pyramidal by three nitrogen atoms with Y? N-bond lengths of 222 pm. Benzene molecules are incorporated parallel to the c-axes. The compound with E = CH crystallizes as a (Et₂O)₃LiCl-adduct in the monoclinic space group P2₁/n with a = 1 111,8(2), b = 1 865,2(6), c = 2 598,3(9) pm, β = 97,41(3)° and Z = 4. The reaction of yttrium tris[bis(trimethylsilyl)amide] with benzonitrile yields the bis(benzonitrile) complex, which crystallizes in the triclinic space group P1 with a = 1 173,7(2), b = 1 210,3(2), c = 1 912,4(3) pm, α = 94,37(1), β = 103,39(1), γ = 117,24(1)° and Z = 2. The amido ligands are in equatorial, the benzonitrile molecules in axial positions.     

Thermal rearrangement of bis(hydroxymethyl)phosphines as a way to P-chiral phosphine oxides

Bis(hydroxymethyl)(2-pyridyl)- and bis(hydroxymethyl)-[(2-pyridyl)ethyl]phosphines on heating to 180 °C undergorearrangement leading to racemic P-chiral tertiary P-methyl-P-(hydroxymethyl)-containing phosphine oxides. The spontaneous self-resolution of these enantiomer mixtures during the crystallization was demonstrated.     

Synthesis, spectroscopic characterization, X-ray structure and DFT calculations of rhenium(III) complex with bis(3,5-dimethylpyrazol-1-yl)methane

[ReCl₃(MeCN)(PPh₃)₂] reacts with bis(3,5-dimethypyrazol-1-yl)methane (bdmpzm) in acetone to give [ReCl₃(bdmpzm)(PPh₃)]. The compound has been studied by IR, UV–Vis spectroscopy and X-ray crystallography. The molecular orbital diagram of [ReCl₃(bdmpzm)(PPh₃)] has been calculated with the density functional theory (DFT) method.     

双(三苄基锡)二元羧酸酯的合成及生物活性

以三苄基氧化锡和相应的二元羧酸反应,合成了14种新的双(三苄基锡)二元羧酸酯。利用元素分析、IR、^1HNMR和MS表征了这些化合物的结构。生物活性测试表明,该类化合物具有较好的杀菌活性。     

Synthesis,spectroscopic characterization,X-ray structure and DFT calculations of five-coordinated chlorocopper(II) complex with bis(3,5-dimethylpyrazol-1-yl)methane

The reaction of copper dichloride dihydrate and bis(3,5-dimethylpyrazol-1-yl)methane affords [Cu{H₂C(3,5-Me₂pz)₂}₂Cl]Cl · 3H₂O. The compound has been studied by IR, UV–Vis spectroscopy and X-ray crystallography. The electronic structure of the [Cu{H₂C(3,5-Me₂pz)₂}₂Cl]⁺ cation has been calculated with the density functional theory (DFT) method. The spin-allowed doublet–doublet electronic transitions of [Cu{H₂C(3,5-Me₂pz)₂}₂Cl]⁺ have been calculated with the time-dependent DFT method, and the UV–Vis spectrum of the title compound has been discussed on this basis.     

Synthesis and Thermal Rearrangement of Tetramethyldisilane-bridged Bis(cyclopentadienyl) Diiron Complexes with Bis(phosphine)Substitution

Photolysis of [Me2SiSiMe2)[C5H4Fe(CO2)]2with a series of bis(phosphine)ligands Ph2P(CH2)n PPh2(n=1-4) leads to the formation of the corresponding diiron complexes with intramolecular and intermolecular bis(phosphine) substitution.When these complexes were heated in refluxing xylene.only in the complexes with intermolecular bis(phosphine )substitution the thermal rearrangement reaction occurred.     

New trigonal tris(phosphine oxides)

The reaction of 1,1,1-tris(chloromethyl)propane with diphenylphosphine under phase-transfer conditions afforded 1,1,1-tris(diphenylphosphinomethyl)propane, whose oxidation gave a previously unknown representative of trigonal tris(phosphine oxides), viz., stable 1,1,1-tris(diphenylphosphorylmethyl)propane. Its analogs, viz., bis(diphenylphosphoryl)diphenylphosphinomethane and tris(diphenylphosphoryl)methane, are unstable in air and decompose with the cleavage of the P-C bond.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1926–1929, September, 2004.