无规聚甲基丙烯酸甲酯在聚乙二醇齐聚物溶液中的自组织及凝胶行为

高度立构规整的聚甲基丙烯酸甲酯在许多有机溶剂中都有形成热可逆凝胶的倾向[1] .高间规度的聚甲基丙烯酸甲酯 ( s PMMA)在溶液及凝胶中的自组织行为可以通过核磁共振、光散射、小角中子散射及红外光谱来研究 [2～ 5] .在甲苯、邻二甲苯和邻二氯苯等溶剂中 ,s PMMA链中的大部分单元都处于有序状态 ;而在苯和氯仿等溶剂中 ,没有这种有序结构形成 ,分子链处于无规线团状态 [5,6] .一般认为 ,这种有序结构的形成与分子链中一定长度间规序列结构单元的存在有关 [7] .对于无规聚甲基丙烯酸甲酯 ( a PMMA) ,由于其较低的间规度 ( <66% ) ,在…     

结晶对等规立构聚甲基丙烯酸甲酯辐射消旋和辐射裂解的影响

本文通过核磁氢谱、DSC和分子量测定,研究了结晶对等规立构聚甲基丙烯酸甲酯辐射消旋和辐射裂解的影响.分子量测定的结果表明,等规立构聚甲基丙烯酸甲酯结晶后,其辐射裂解反应减弱,裂解G值减小将近一半.核磁氢谱测定辐照试样的空间立构变化结果为:随着辐照剂量的增加,等规立构逐渐变为无规立构和间规立构,其变化规律相似于非晶试样.结果还表明,晶区的消旋反应比裂解反应更为显著.DSC测得的试样熔点,随着辐照剂量的增加而急剧下降,由Flory结晶熔化理论计算得晶区的辐射破坏G值为8.8.该值远大于聚乙烯晶区的破坏G值.     

结晶对等规立构聚甲基丙烯酸甲酯辐射消旋和辐射裂解的影响

 本文通过核磁氢谱、DSC和分子量测定,研究了结晶对等规立构聚甲基丙烯酸甲酯辐射消旋和辐射裂解的影响.分子量测定的结果表明,等规立构聚甲基丙烯酸甲酯结晶后,其辐射裂解反应减弱,裂解G值减小将近一半.核磁氢谱测定辐照试样的空间立构变化结果为:随着辐照剂量的增加,等规立构逐渐变为无规立构和间规立构,其变化规律相似于非晶试样.结果还表明,晶区的消旋反应比裂解反应更为显著.DSC测得的试样熔点,随着辐照剂量的增加而急剧下降,由Flory结晶熔化理论计算得晶区的辐射破坏G值为8.8.该值远大于聚乙烯晶区的破坏G值.     

磁场对聚合物立体构型影响的研究(Ⅰ)——聚甲基丙烯酸甲酯

本文研究了在甲基丙烯酸甲酯聚合过程中,磁场对产物中间同立构含量的影响。间同立构含量的测定是采用红外光谱定量法。实验结果表明: (1)聚甲基丙烯酸甲酯的间同立构百分含量S%值随磁场强度的增加按指数关系增加。 (2)聚甲基丙烯酸甲酯的玻璃化温度随磁场强度的增加而增加。 (3)聚甲基丙烯酸甲酯的平均分子量随磁场强度的增加,也按指数关系增加。 (4)通过公式计算了聚甲基丙烯酸甲酯分子链中能连续出现N个间同立构链节的组成几率F_N值。     

聚甲基丙烯酸甲酯辐射裂解和消旋的空间立构效应

本文研究了三种不同空间立构聚甲基丙烯酸甲酯的辐射效应,提出裂解过程是一种裂解与重合的动态平衡过程。分子量降低和消旋作用对温度的依赖性,是由于分子运动和笼罩效应以及重合的空间位阻效应所致。辐照温度愈高,裂解产额愈大。相同条件下辐照,全同立构比无规立构试样的裂解产额更大。 全同立构聚甲基丙烯酸甲酯辐照后,不仅分子链断裂,而且空间立构也发生很大变化。随着辐照剂量的增加,全同立构含量逐渐减少,而无规立构含量和间同立构含量却逐渐增加。     

甲基丙烯酸甲酯原子转移自由基聚合等规度研究

在0～100℃温度范围内,由原子转移自由基聚合方法,采用助催化和非助催化体系,引发甲基丙烯酸甲酯聚合,利用¹³CNMR测定聚甲基丙烯酸甲酯的等规度.发现原子转移自由基聚合仍以间同立构为主,随着聚合温度的升高间同立构等规度降低,与通常自由基聚合对有规立构控制特征相似.助催化剂异丙醇铝和活性端羰基配位,对聚合物的立构规整性有一定的影响.     

立构复合PL(D) LA-TMC无规共聚物的制备、结构与性能

以辛酸亚锡为催化剂,通过开环聚合法制备了聚左旋乳酸-三亚甲基碳酸酯(PLLA-TMC)和聚右旋乳酸-三亚甲基碳酸酯(PDLA-TMC)无规共聚物.利用共聚物中PLLA/PDLA链段形成立构复合体,通过溶液浇注法制备了PLLA-TMC/PDLA-TMC立构复合聚乳酸材料(sc-PLA-TMC).研究结果表明,聚合物链中的柔性TMC单元可以增强L(D)LA链段的运动能力,有助于不同旋光性的LA链段形成立构复合晶体,但也使得L(D)LA链段的规整度和序列长度降低.即随着共聚物链段中柔性TMC单元摩尔含量的增加,sc-PLA-TMC中同质结晶能力降低.当TMC含量≥5%时,仅生成熔点200℃的PLLA/PDLA立构复合结晶,表明sc-PLA-TMC的耐热性有所提高.蛋白酶K降解实验表明,PL(D)LA-TMC共聚物的降解速率不但比PLLA高,而且可通过共聚物中TMC含量进行调控.     

聚甲基丙烯酸-2,2,3,3-四氟丙酯的立构规整性

本文报道了由60℃自由基引发聚合得到的聚甲基丙烯酸-2,3,3-四氟丙酯,经浓硫酸水解而生成聚甲基丙烯酸。后者以重氮甲烷酯化,转化成聚甲基丙烯酸甲酯,并且分别作红外光谱、核磁共振波谱分析。根据分析结果推断聚甲基丙烯酸-2,2,3,3-四氟丙酯为无规立构聚合物,并与聚甲基丙烯酸正丙酯衍生而来的相应产物作比较。     

基于聚合物／金属纳米结构镶嵌型柔性基底的表面增强拉曼光谱技术

表面增强拉曼光谱（SERS）技术可极大增强传统拉曼光谱的信号强度,从而拓展拉曼光谱的应用范围．针对SERS技术在分析对象、分析环境的普适性和分析效率方面的限制,本文设计并发展了一种透明、柔性、自支撑SERS基底的制备、保存和使用方法．该基底由聚合物聚甲基丙烯酸甲酯（PMMA）和在其表面镶嵌的金属纳米结构组成,可以通过背入射法用于任意形貌样品表面的直接和在线检测．柔性SERS（Ag）基底在R6G水溶液表面的检测限小于1pmol／L．     

表面引发的原子转移自由基聚合法在聚偏二氟乙烯表面制备可控的聚甲基丙烯酸甲酯刷

采用表面引发的原子转移自由基聚合法(ATRP)在聚偏二氟乙烯(PVDF)表面制备结构可控的聚甲基丙烯酸甲酯刷。通过碱处理和紫外光照溴代的方法,将ATRP引入到PVDF表面; 然后采用ATRP法将甲基丙烯酸甲酯接枝到溴代的PVDF表面。采用傅里叶变换红外光谱和X-射线光电子能谱对改性前后PVDF表面的结构进行了表征。结果表明甲基丙烯酸甲酯成功地接枝到了PVDF表面。     

PMMA stereocomplex: Study of the aggregation process by electron microscopy

The structure of stereocomplex aggregates formed from isotactic and syndiotactic poly (methyl methacrylate)s was studied in tetrahydrofuran (THF) by transmission electron microscopy (TEM). We have found that the primary stereocomplex particles are nearly spherical and, as the complexation advances, the particles lengthen. Eventually aggregates branch to form a three-dimensional network.     

Thermally stimulated depolarization currents of tactic polymethyl methacrylates and their mixtures

Summary Thermally stimulated depolarization currents (TSDC) of atactic (a), syndiotactic (s) and isotactic (i) PMMA and mixtures ofs- andi-PMMA were measured. In pure tactic PMMA, TSDC peak was obtained at a temperature corresponding to the glass transition temperature of each PMMA. TSDC of mixtures isolated as precipitates from 1/1 and 1/2 (i/sweight ratio) mixed solutions showed a peak which can be attributed to the glass transition temperature of the stereocomplex. TSDC of original l/1 mixture showed two peaks which are ascribed to the glass transition temperature of residual i-PMMA and the stereocomplex. The results suggests that stereocomplex formation occurs ini/s weight ratio of 1/2 independent of the way of preparation.With 9 figures and 1 table     

Solid matrix polymerization and stereoisomeric complexes of poly(methyl methacrylate)

The polymerization of methyl methacrylate within solid matrices of stereoregular poly(methyl methacrylate) has been studied by proton NMR and wide angle X-ray diffraction. The semi-crystalline isotactic (i-) PMMA matrix was synthesized in the laboratory by anionic polymerization initiated by phenylmagnesium bromide, and the syndiotactic (s-) PMMA matrix was synthesized through a Ziegler–Natta reaction. Matrix polymerization of the monomer was initiated through the redox activation of benzoyl peroxide with N,N-dimethyl-p-toluidine. NMR measurements of triad distributions in matrix-polymerized chains suggest that the well-known stereospecific replica polymerization in PMMA (syndiotactic sequences promote isotactic sequences and vice versa) plays only a limited role in the systems studied. Experimental results indicate that chains grown within the i-PMMA or s-PMMA solid matrices have greater degrees of configurational disorder. The greater concentration of atactic triads in these chains could be the result of limited free volume or steric effects during polymerization in a highly condensed environment. X-ray diffraction studies of solution cast blends of isotactic PMMA and PMMA with conventional tacticity reveal some crystallinity with a structure characteristic of the stereocomplex formed by isotactic and syndiotactic PMMA from suitable solvents. Evidence was obtained for the presence of this complex in solidified mixtures of the i-PMMA solid matrix and liquid monomer. This observation is an example of special intermolecular structures that can form under conditions of in situ growth of chains within a pre-polymerized matrix.     

Stereospecific Cyclic Poly(methyl methacrylate) and Its Topology‐Guided Hierarchically Controlled Supramolecular Assemblies

In this study, the stereocomplexation between a novel stereospecific cyclic vinyl polymer, that is, cyclic syndiotactic poly(methyl methacrylate) (st‐PMMA), with the complementary linear isotactic (it‐) PMMA was investigated. Surprising new insight into the effects of the topology (i.e., end groups), size, and tacticity of the assembling components on stereocomplex formation was obtained. Characterization of the stereocomplexes revealed that the self‐assembly of cyclic st‐PMMAs and linear it‐PMMAs resulted in the formation of an unprecedented “polypseudorotaxane‐type” supramolecular assembly. This stereocomplex exhibited remarkably different physical properties as compared to the conventional PMMA triple‐helix stereocomplex as a result of the restricted topology imposed by the cyclic st‐PMMA assembling component.     

Stereospecific bulk polymerization of methyl methacrylate initiated by its tactic polymers

Methyl methacrylate (MMA) was polymerized by radical initiation at 90°C by its own preformed tactic polymers, i.e., conventional (c-PMMA), isotactic (i-PMMA), and syndiotactic (s-PMMA) PMMA, and also by a preformed 1:1 stereocomplex of i-PMMA and s-PMMA. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR spectra and viscometry. Higher polymerization rates were obtained in the presence of stereo-regular PMMA than in the presence of c-PMMA. Moreover, it appeared that i-PMMA promoted the formation of s-PMMA, and conversely s-PMMA the formation of i-PMMA, especially in the initial stages of the reaction. A higher M?_v of the preformed polymer yielded a higher rate and a higher stereospecificity of the polymerization. No polymerization took place in the absence of performed PMMA. The results support a replica mechanism proposed by Szwarc, in which polymerization is preceded by a specific arrangement of monomeric units along the polymeric chain into a distinctive pattern. Such arrangement coupled with a strong tendency of the isotactic and syndiotactic species to associate may lead to the present stereospecific replica polymerization. This association is demonstrated by rapid gelation during polymerization and by lowering of reduced viscosity in very dilute mixtures of i-PMMA and s-PMMA in MMA.     

Nanosphere and nanonetwork formations of [60]fullerene-end-capped stereoregular poly(methyl methacrylate)s through stereocomplex formation combined with self-assembly of the fullerenes

We report a novel and versatile method for constructing a supramolecular nanosphere and nanonetwork based on isotactic and syndiotactic C60-end-capped poly(methyl methacrylate)s (it- and st-PMMA-C60's) through their stereocomplex formation combined with self-assembly of the terminal C60. The stereoregular PMMA-C60's with a precisely controlled structure including molecular weight, its distribution, tacticity, and the chain-end structure were synthesized by the stereospecific anionic living polymerizations of methyl methacrylate followed by end-capping with C60, and their structures were proven by size exclusion chromatography, NMR, UV-vis, and MALDI-TOF-MS analyses. The stereoregular PMMA-C60's self-assembled to form a core-shell aggregate with C60 as the core and the PMMA chains as the shell in H2O/CH3CN (1/9, v/v) due to the solvophobic interaction of the C60 units. These it- and st-PMMA-C60 aggregates further supramolecularly assembled through iterative stereocomplex formation into nanonetworks in which the self-assembled C60 clusters were robustly connected with two- and three-dimensional arrangements. In addition, when the it- and st-PMMA-C60's were simultaneously mixed, self-assembly of the C60 units and stereocomplex formation of the it- and st-PMMA chains took place at once, resulting in the formation of uniformly sized spherical nanoparticles with resistance to heat. Similar nanonetwork architectures can be produced using it-PMMA-C60 clusters and st-PMMA prepolymers as the binder.     

Stereoregular uniform polymers

Progress in stereospecific living polymerizations of methacrylate monomers and the concept and realization of “uniform polymers” and “uniform polymer architectures” are described, with particular emphasis on the fusion of polymer synthesis and characterization and their interactive stimulation, which are inevitable not only for the formation of polymers with highly controlled structures but also for the development of polymer characterization, thereby bringing about the spiral progress of both fields. First, three types of stereospecific living polymerizations are described, including formation of 100% isotactic poly(methyl methacrylate) (PMMA), 98% syndiotactic PMMA, and 96% heterotactic PMMA. Supercritical fluid chromatography (SFC) has proven useful for isolating uniform polymers from these stereoregular PMMAs with narrow molecular weight distributions. Living nature of these stereospecific polymerizations is further utilized for the synthesis of end‐functionalized stereoregular polymers, which are separated into uniform end‐functionalized polymers and used to construct more elaborated uniform polymer architectures such as stereoblock, star, and comb polymers. The uniform polymers have proven quite useful for the studies on the relationship between structures and properties such as glass transition temperature, melting temperature, and solution viscosity. In addition to this, stereoregular uniform polymers are particularly important to understand stereocomplex formation between isotactic and syndiotactic uniform PMMAs. On‐line GPC/NMR measurement at 750 MHz and −15°C in acetone/acetone‐d₆ allowed definitive determination of the compositions of the complexed species and noncomplexed species separately, but not in average. Also interesting is the stereocomplex formation of uniform stereoblock PMMA, where intramolecular complexation in addition to an intermolecular complexation was distinctively observed by GPC analysis in acetone. Uniform star and comb PMMAs were also prepared and found useful to discuss the effect of branching on the solution viscosity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 245–260, 1999     

Identification of a stereoblock poly(methyl methacrylate) sample with a stereocomplex

Acid hydrolysis of a stereoblock poly(methyl methacrylate) sample leads to a mixture of isotactic and syndiotactic poly(methacrylic acid) which can be separated by electrophoresis. The experiment confirms the stereochemical identity between the so-called “stereoblock” poly(methyl methacrylate) and the stereocomplex which syndiotactic and isotactic poly(methyl methacrylate) form in the ratio 2:1. A possible mechanism of replica polymerization is suggested to account for this effect.     

Thermal stability of porous it‐PMMA thin film obtained by the extraction of st‐PMAA from it‐PMMA/st‐PMAA stereocomplex with layer‐by‐layer assembly on a substrate

The functionality of porous isotactic (it) poly(methyl methacrylate) (PMMA) thin films, which were previously developed by the selective extraction of syndiotactic (st) poly(methacrylic acid) (PMAA) from the it‐PMMA/st‐PMAA stereocomplex thin film on a substrate using the layer‐by‐layer assembly method was investigated after thermal treatment (70, 80, and 90 °C) in water for 4 h. Quartz crystal microbalance analysis and infrared spectra measurements revealed that the st‐PMAA incorporation ability of the porous it‐PMMA thin film decreased in order at 80 and 90 °C, while there was no decrease observed at 70 °C. X‐ray diffraction analysis also supported the thermal stability of the porosity at 70 °C, whereas two it‐PMMA crystalline peaks (2θ = 9° and 14°) were generated during heating at 90 °C. The loss of the functionality of the it‐PMMA thin film was thus shown to be due to crystallization, which was caused by the increase in polymer‐chain mobility during the heating process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3265–3270, 2010     

Adsorption of bovine serum albumin onto poly(methyl methacrylate) stereocomplex films with a molecularly regulated nanostructure

Stereoregular poly(methyl methacrylate)s (PMMAs) were stepwise assembled on a quartz crystal microbalance (QCM) substrate after the immersion of the QCM into alternating acetonitrile solutions at ambient temperature. A quantitative QCM analysis at each step showed stereocomplex formation on the substrate surface. The adsorption of bovine serum albumin (BSA) onto stereocomplex films with a molecularly regulated nanostructure was analyzed quantitatively. The adsorption constant and the maximum adsorption amount, calculated by the assumption of Langmuir‐type adsorption, showed that BSA adsorbed with a relatively weak interaction onto the stereocomplex films. The BSA adsorption onto the stereocomplex films occurred in an end‐on manner, with a smaller adsorption constant than for that onto individual spin‐coated films. The amount of BSA adsorbed was significantly affected by the molecular weight of syndiotactic PMMA. Attenuated total reflection spectra indicated that BSA adsorbed onto the films with or without denaturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1807–1812, 2003