Vibrational spectrum and assignments of 2-(4-methoxyphenyl)-1H-benzo[d]imidazole by ab initio Hartree-Fock and density functional methods

The room temperature attenuated total reflection Fourier transform infrared spectrum of the 2-(4-methoxyphenyl)-1H-benzo[d]imidazole has been recorded with diamond/ZnSe prism. The conformational behaviour, structural stability of optimized geometry, frequency and intensity of the vibrational bands of the title compound were investigated by utilizing ab initio calculations with 6-311G** basis set at HF, B3LYP, BLYP, B3PW91 and mPW1PW91 levels. The harmonic vibrational frequencies were calculated and scaled values have been compared with experimental IR spectrum. The observed and the calculated frequencies are found to be in good agreement. The theoretical vibrational spectra of the title compound were interpreted by means of potential energy distributions using VEDA 4 program. Furthermore, the optimal uniform scaling factors calculated for the title compound are 0.9120, 0.9596, 0.9660, 0.9699, and 0.9993 for HF, mPW1PW91, B3PW91, B3LYP and BLYP methods, respectively.     

Spectroscopic analysis of 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitro-phenyl) acetonitrile

The optimized geometry and vibrational frequencies of 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitro-phenyl) acetonitrile (DOPNA) were obtained by ab initio DFT/B3LYP level with complete relaxation in the potential energy surface using 6-31G and 6-311G basis sets. The Fourier-transform infrared (FT-IR) spectrum of DOPNA has been recorded in the region 4000-400 cm(-1). The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR spectrum. The calculated frequencies are in comparable agreement with the experimental frequencies. The calculated energy span between the HOMO and the LUMO of DOPNA is 2.94 and 2.87eV by B3LYP/6-31G and B3LYP/6-311G, respectively.     

Molecular structure and vibrational assignment of 2-,4-,6-methylquinoline by density functional theory (DFT) and ab initio Hartree-Fock (HF) calculations

The molecular geometry, the normal mode frequencies and corresponding vibrational assignments of 2-,4-,6-methylquinoline (2-,4-,6-mq) in the ground state were performed by HF and DFT/B3LYP levels of theory using the 6-31++G(d,p) basis set. Harmonic and anharmonic vibrational frequencies were calculated. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method by using parallel quantum mechanic solutions program. The general agreements between the observed and calculated frequencies are shown.     

FTIR and FT-Raman spectra, vibrational assignments and density functional theory calculations of 2,6-dibromo-4-nitroaniline and 2-(methylthio)aniline

The FTIR and FT-Raman spectra of 2,6-dibromo-4-nitroaniline (2,6-DB4NA) in solid phase and 2-(methylthio)aniline (2-MTA) in liquid phase were measured. The geometry and normal vibrations have been obtained from the density functional theory (DFT) with the B3LYP method employing the 6-31G* basis set. Scale factors, which bring computational frequencies in closer agreement with the experimental data, have been calculated for predominant vibrational motions of the normal modes. The effects of the amino, bromine, nitro, thio and methyl substituents on vibrational frequencies have been investigated. The infrared and Raman spectra were also predicted from the calculated intensities. The observed and the calculated spectra were found to be in good agreement.     

Characterization of pentacarbonyl(4-methylpyridine)chromium(0) complex using density functional theory (DFT) and Hartree-Fock (HF) computational methods

The optimized molecular structure, atomic charges, vibrational frequencies, thermodynamic properties, nuclear magnetic resonance (NMR) and ultraviolet-visible (UV-Vis) spectral data of pentacarbonyl(4-methylpyridine)chromium(0) complex have been investigated by performing ab initio Hartree-Fock (HF) and density functional theory, B3LYP, B3PW91 and BE1PBE methods with 6-311G, 6-311+G(3d,3p) and 6-31G(d,p) basis set. The calculated NMR data at 6-311G basis set, vibrational frequencies at 6-311+G(3d,3p) basis set and the optimized geometric bond lengths and bond angles at 6-31G(d,p) basis set are in good agreement with the corresponding experimental values. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) have been simulated. In addition, the transition state and energy band gap and infrared intensities have also been reported.     

Structure and vibrational spectroscopy investigation of 2-(4-chlorophenyliminomethyl)-8-hydroxyquinoline

2-(4-Chlorophenyliminomethyl)-8-hydroxyquinoline was synthesized and crystal data was obtained in the orthorhombic space group P-1, with Z=4. Unit cell parameters a=4.744(7) ?, b=9.981(15) ?, c=27.27(4) ? and V=12915(3) ?(3). In this paper the structural properties and vibrational frequencies of 8-hydroxyquinoline derivative, 2CP8HQ, are studied with the B3LYP and HF methods. Two stable conformers are obtained. The calculated frequencies are in good agreement with the experiment results. It is indicated that both of theoretical calculations were suitable for molecular vibrational frequencies study and the scaled B3LYP method was superior to the scaled HF methods.     

Synthesis, IR spectra, crystal structure and DFT studies on 1-acetyl-3-(4-chlorophenyl)-5-(4-methylphenyl)-2-pyrazoline

1-Acetyl-3-(4-chlorophenyl)-5-(4-methylphenyl)-2-pyrazoline has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction. Density functional (DFT) calculations have been carried out for the title compound by using the B3LYP method at the 6-311G** basis set level. The calculated results show that the predicted geometry can reproduce well the structural parameters. Predicted vibrational frequencies have been assigned and compared with experimental IR spectra and they are supported each other. On the basis of vibrational analyses, the thermodynamic properties of the title compound at different temperatures have been calculated, revealing the correlations between C(0)(p, m), S(0)(m), H(0)(m) and temperatures.     

NMR Parameters and Vibrational Investigation of 2-Dicyanovinyl-5-（4-ethoxyphenyl） thiophene by ab initio HF and DFT Calculations

Optimized geometry and harmonic vibrational frequency of 2-dicyanovinyl-5-(4- ethoxyphenyl)thiophene (C16H12N2OS) are calculated at the HF/6-31++G(d,p) and B3LYP/6- 311++G(d,p) levels. Mulliken charges in the ground state are also calculated. The research shows the presence of intermolecular interaction in the title compound. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR spectra. A detailed interpretation of the infrared spectra of the title compound is reported. The theoretical spectrograms for IR spectra of the title compound have been constructed. The isotropic chemical shift computed by 13C and 1H NMR analyses also shows good agreement with the experimental observations.     

Ab initio studies on vibrational spectra of Ni(II), Pd(II), and Pt(II) complexes of M'X4(2-) and M'OS3(2-) (M' = Mo, W; X = O, S)

The vibrational spectra of MM'2X8(2-) and trans-MM'2S6O2(2-) (M = Ni(II), Pd(II), Pt(II); M' = Mo, W; X = O, S) are calculated using ab initio method at RHF/LanL2DZ level. The calculated vibrational frequencies of MM'2S8(2-) and trans-MM'2O2S6(2-) are evaluated via comparison with experimental data. The results obtained by this method have the deviation <5% for M'S and MS stretching vibrational frequencies, however, relatively higher deviation is obtained for M'O stretching vibrational frequencies. Some vibrational frequencies of these complexes that have not been experimentally reported are also predicted and some of the experimental values are assigned.     

Synthesis, crystal structure, insecticidal activity and DFT study on the geometry and vibration of O-(E)-1-{1-[(6-chloropyridin-3-yl)methyl]-5-methyl-1H-1,2,3-triazol-4-yl}ethyleneamino-O-ethyl-O-phenylphosphorothioate

The title compound, O-(E)-1-{1-[(6-chloropyridin-3-yl)methyl]-5-methyl-1H-1,2,3-triazol-4-yl}ethyleneamino-O-ethyl-O-phenylphosphorothioate, has been synthesized via the condensation reaction of 1-{1-[(6-chloropyridin-3-yl)methyl]-5-methyl-1H-1,2,3-triazol-4-yl}ethanone oxime and O-ethyl-O-phenylphosphorochloridothioate in the presence of NaOH powder in refluxing EtOH. Its structure was characterized by (1)H NMR, FTIR, Raman, elemental analysis and X-ray single crystal diffraction. The results of preliminary bioassays indicated that the title compound displays good insecticidal activity. Density functional (DFT) calculations have been carried out for the title compound by using the Becke-Lee-Yang-Parr's three-parameter hybrid functional (B3LYP) method at 6-31G and 6-31G basis sets. The calculated results show that the predicted geometry can well reproduce the structural parameters. The vibrational wave numbers of the title compound were calculated at same level. Predicted vibrational frequencies have been assigned and compared with experimental IR and Raman spectra and they are supported each other.     

Experimental and theoretical studies on vibrational spectra of 4-(2-furanylmethyleneamino)antipyrine, 4-benzylideneaminoantipyrine and 4-cinnamilideneaminoantipyrine

This work deals with the IR and Raman spectroscopy of 4-(2-furanylmethyleneamino) antipyrine (FAP), 4-benzylideneaminoantipyrine (BAP) and 4-cinnamilideneaminoantipyrine (CAP) by means of experimental and quantum chemical calculations. The equilibrium geometries, harmonic frequencies, infrared intensities and Raman scattering activities were calculated by density functional B3LYP method with the 6-31G(d) basis set. The comparisons between the calculated and experimental results covering molecular structures, assignments of fundamental vibrational modes and thermodynamic properties were investigated. The optimized molecular geometries have been compared with the experimental data obtained from XRD data, which indicates that the theoretical results agree well with the corresponding experimental values. For the three compounds, comparisons and assignments of the vibrational frequencies indicate that the calculated frequencies are close to the experimental data, and the IR spectra are comparable with some slight differences, whereas the Raman spectra are different clearly and the strongest Raman scattering actives are relative tightly to the molecular conjugative moieties linked through their Schiff base imines. The thermodynamic properties (heat capacities, entropies and enthalpy changes) and their correlations with temperatures were also obtained from the harmonic frequencies of the optimized strucutres.     

[M(Im)2X2]型配合物的Far-IR和Raman光谱的理论研究

本文用从头计算RHF和密度泛函B3LYP方法以及LanL2DZ，SDD和6-31G(d)基组计算了配合物M(Im)₂X₂ (Im=imidazole；M=Zn(Ⅱ)，Pd(Ⅱ)，Pt(Ⅱ)；X=F，Cl，Br，I)的几何构型以及Far-IR和Raman振动频率。计算结果表明，对Zn(Ⅱ)配合物而言,B3LYP/6-31G(d)方法得到的几何参数与实验值吻合得最好，B3LYP/SDD次之。在计算Far-IR和Raman振动频率时，发现采用6-31G(d)基组，两种方法计算的结果差别不大。对LanL2DZ和SDD基组而言，对计算结果影响较大的是理论方法，基组影响甚微，个别的振动频率基组影响较大，相比较而言，SDD基组得到的结果更好一些。本文所使用的两种计算方法都能得到与实验值比较吻合的结果，而用从头计算RHF方法计算的结果与实验值更接近一些。在此基础上，预测了Pd(Ⅱ)和Pt(Ⅱ)配合物的Far-IR和Raman振动频率。     

Quantum chemical computational studies on 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester

The optimized molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) (1)H and (13)C NMR shift values of 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester have been calculated by using Hartree-Fock (HF) and density functional method (DFT/B3LYP) with 6-31G(d), 6-31G(d,p) and LANL2DZ basis sets. The optimized molecular geometric parameters were presented and compared with the data obtained from X-ray diffraction. In order to fit the calculated harmonic wavenumbers to the experimentally observed ones, scaled quantum mechanics force field (SQM FF) methodology was proceeded. Correlation factors between the experimental and calculated (1)H chemical shift values of the title compound in vacuum and in CHCl(3) solution by using the conductor-like screening continuum solvation model (COSMO) were reported. The calculated results showed that the optimized geometry well reproduces the crystal structure. The theoretical vibrational frequencies and chemical shifts are in very good agreement with the experimental data. In solvent media the energetic behavior of the title compound was also examined by using the B3LYP method with the 6-31G(d) basis set, applying the COSMO model. The obtained results indicated that the total energy of the title compound decreases with increasing polarity of the solvent. Furthermore, molecular electrostatic potential (MEP), natural bond orbital (NBO) and frontier molecular orbitals (FMOs) of the title compound were performed by the B3LYP/LANL2DZ method, and also thermodynamic parameters for the title compound were calculated at all the HF and B3LYP levels.     

Ab initio HF, DFT and experimental (FT-IR) investigation of vibrational spectroscopy of P-N,N-dimethylaminobenzylidenemalononitrile (DBM)

The optimized geometry and vibrational frequencies of P-N,N-dimethylaminobenzylidenemalononitrile (DBM) were obtained by ab initio HF and DFT/B3LYP levels with complete relaxation in the potential energy surface using 6-31++G(d,p) and 6-311++G(d,p) basis sets. The Fourier-transform infrared (FT-IR) spectrum of DBM has been recorded in the region 4000-400 cm(-1). The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR spectrum. The calculated frequencies are in good agreement with the experimental frequencies.     

Experimental and density functional theory and ab initio Hartree-Fock study on the vibrational spectra of 2-(4-fluorobenzylideneamino)-3-(4-hydroxyphenyl) propanoic acid

2-(4-Fluorobenzylideneamino)-3-(4-hydroxyphenyl) propanoic acid (4-FT) was synthesized through the reaction of 4-fluorobenzaldehyde and l-tyrosine in refluxing EtOH. The structure of 4-FT was verified by measuring 1H NMR, FTIR and Raman. The ground-state geometries were optimized at B3LYP/6-31G**, B3LYP/6-31G*, HF/6-31G** and HF/6-31G* levels without symmetry constrains. The vibrational wavenumbers of 4-FT were calculated at same levels. The scaled spectra using B3LYP methods, which are in a good agreement with the measured spectra, are superior to those calculated using HF methods.     

4-咔唑基-N-（3,′4′-二甲苯基）-1,8-萘二甲酰亚胺作为电子传输材料的实验和理论研究（英文）

通过乌尔曼偶联反应合成了一种新颖的萘胺-咔唑分子,4-咔唑基-N-（3,′4′-二甲苯基）-1,8-萘二甲酰亚胺（CNP）.运用量子化学中的密度泛函理论（TD-DFT）,在B3LYP/6-31（d）水平上对化合物在阴离子、阳离子、中性状态下进行了结构全优化,得到了化合物的总能量、HOMO能级、LUMO能级、电离能和电子亲合势.理论计算了化合物的紫外吸收光谱和红外光谱.紫外吸收光谱、红外光谱、HOMO能级和LUMO能级数值与实验值高度一致.在理论上分析了化合物作为电致发光材料的可能性,化合物CNP是一种很好的电子传输材料.     

Molecular structure and vibrational spectra of 4-, 5-, 6-chloroindole

The molecular geometry, IR intensities, harmonic and anharmonic vibrational frequencies of 4-, 5-, 6-chloroindole in the ground state were calculated by DFT/B3LYP level of theory using the 6-31G (d, p) basis set. To give complete and reasonable vibrational assignments, the normal coordinate analysis has been performed for 4-chloroindole, 5-chloroindole and 6-chloroindole. The effect of position of chloro atom on the molecular properties (electron density, dipole moments and energies) of the indole aromatic system is examined on the basis of calculation data for 4-, 5- and 6-chloroindoles.     

Crystal Structure and DFT Studies of a Triazole Derivative： 4- （ 2-Hydrobenzylideneamino ） -3- （ 1,2,4-triazol-4-ylmethyl） 1H-1, 2,4-triazole-5 （4H） -thione

A novel triazole derivative 4-(2-hydrobenzylideneamino)-3-(1,2,4-triazol-4-ylmethyl)-1H-1,2,4-triazole-5(4H)-thione(1) was synthesized and characterized using elemental analysis, FTIR, and 1H NMR, and its crystal structure was determined via X-ray single crystal diffraction analysis. Crystal data: monoclinic, P2(1)/c, a=0.83335(9) nm, b=1.49777(16) nm, c=1.14724(12) nm, β =107.990(2)°, D=1.470 Mg/m3, and Z=4. The geometries and the vibrational frequencies were determined using the density functional theory(DFT) method at the B3LYP/ 6-31G level. To demonstrate the accuracy of the reaction route of compound 1, one of the important intermediates was also tested using the same method. The structural parameters of the two compounds calculated using the DFT study are close to those of the crystals, and the harmonic vibrations of the two compounds computed via the DFT method are in good agreement with those in the observed IR spectral data. The thermodynamic properties of the title compound were calculated, and the compound shows a good structural stability at normal temperature. The test results of biological activities show that it has a certain bactericidal ability.     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 3-(6-benzoyl-2-oxobenzo[d]oxazol-3(2H)-yl)propanoic acid

The molecular structure, vibrational frequencies and infrared intensities of the 3-(6-benzoyl-2-oxobenzo[d]oxazol-3(2H)-yl)propanoic acid were calculated by the HF and DFT methods using 6-31G(d) basis set. The FT-infrared spectra have been measured for the title compound in the solid state. We obtained 11 stable conformers for the title compound, however the Conformer 1 is approximately 3.88 kcal/mol more stable than the Conformer 11. The comparison of the theoretical and experimental geometry of the title compound shows that the X-ray parameters fairly well reproduce the geometry of the Conformer 1. The harmonic vibrations computed of this compound by the B3LYP/6-31G(d) method are in a good agreement with the observed IR spectral data. Theoretical vibrational spectra of the title compound were interpreted by means of PEDs using VEDA 4 program.     

New scale factors for harmonic vibrational frequencies using the B3LYP density functional method with the triple-zeta basis set 6-311+G(d,p)

We have calculated optimal frequency scaling factors for the B3LYP/ 6-311+G(d,p) method for fundamental vibrational frequencies on the basis of a set of 125 molecules. Using the new scaling factor, the vibrational frequencies calculated with the triple-zeta basis set 6-311+G(d,p) give significantly better accuracy than those calculated with the double-zeta 6-31G(d) basis set. Scale factors were also determined for low-frequency vibrations using the molecular set of 125 molecules and for zero-point energies using a smaller set of 40 molecules. We have studied the effect on the calculated vibrational frequencies for various combinations of diffuse and polarization functions added to the triple-zeta 6-311G basis set. The 6-311+G(d,p) basis set is found to give almost converged frequencies for most molecules, and we conclude that our optimum scaling factors are valid for the basis sets 6-311G(d,p) to 6-311++G(3df,3pd). The new scale factors are 0.9679 for vibrational frequencies, 1.0100 for low-frequency vibrations, and 0.9877 for zero-point vibrational energies.