Reductive Dimerization of Triruthenium Clusters Containing Cationic Aromatic N‐Heterocyclic Ligands

The cationic cluster complexes [Ru₃(μ‐H)(μ‐κ²N,C‐L¹ Me)(CO)₁₀]⁺ ( 1 ⁺; HL¹ Me=N‐methylpyrazinium), [Ru₃(μ‐H)(μ‐κ²N,C‐L² Me)(CO)₁₀]⁺ ( 2 ⁺; HL² Me=N‐methylquinoxalinium), and [Ru₃(μ‐H)(μ‐κ²‐N,C‐L³ Me)(CO)₁₀]⁺ ( 3 ⁺; HL³ Me=N‐methyl‐1,5‐naphthyridinium), which contain cationic N‐heterocyclic ligands, undergo one‐electron reduction processes to become short lived, ligand‐centered, trinuclear, radical species ( 1 – 3 ) that end in the formation of an intermolecular C? C bond between the ligands of two such radicals, thus leading to neutral hexanuclear derivatives. These dimerization processes are selective, in the sense that they only occur through the exo face of the bridging ligands of trinuclear enantiomers of the same configuration, as they only afford hexanuclear dimers with rac structures (C₂ symmetry). The following are the dimeric products that have been isolated by using cobaltocene as reducing agent: [Ru₆(μ‐H)₂{μ₆‐κ⁴N₂,C₂‐(L¹ Me)₂}(CO)₁₈] ( 5 ; from 1 ⁺), [Ru₆(μ‐H)₂{μ₆‐κ⁴N₂,C₂‐(L² Me)₂}(CO)₁₈] ( 6 ; from 2 ⁺), and [Ru₆(μ‐H)₂{μ₄‐κ⁸N₂,C₆‐(L³ Me)₂}(CO)₁₈] ( 7 ; from 3 ⁺). The structures of the final hexanuclear products depend on the N‐heterocyclic ligand attached to the starting materials. Thus, although both trinuclear subunits of 5 and 6 are face‐capped by their bridging ligands, the coordination mode of the ligand of 5 is different from that of the ligand of 6 . The trinuclear subunits of 7 are edge‐bridged by its bridging ligand. In the presence of moisture, the reduction of 3 ⁺ with cobaltocene also affords a trinuclear derivative, [Ru₃(μ‐H)(μ‐κ²N,C‐L^3′ Me)(CO)₁₀] ( 8 ), whose bridging ligand (L^3′ Me) results from the formal substitution of an oxygen atom for the hydrogen atom (as a proton) that in 3 ⁺ is attached to the C⁶ carbon atom of its heterocyclic ligand. The results have been rationalized with the help of electrochemical measurements and DFT calculations, which have also shed light on the nature of the odd‐electron species, 1 – 3 , and on the regioselectivity of their dimerization processes. It seems that the sort of coupling reactions described herein requires cationic complexes with ligand‐based LUMOs.     

Linking Borane with N‐Heterocyclic Carbenes: Effective Hydrogen‐Atom Donors for Radical Reactions

Undue influence : N‐heterocyclic carbenes (NHCs) were found to reduce the strength of the B? H bonds of borane by a surprisingly large amount upon the formation of NHC–BH₃ complexes. This property was exploited in the development of a suite of NHC–borane complexes for the reduction of xanthates in radical‐mediated Barton–McCombie‐type deoxygenation reactions (see scheme). AIBN=azobisisobutyronitrile, Bn=benzyl.

     

Tautomerisation of 2‐Substituted Pyridines to N‐Heterocyclic Carbene Ligands Induced by the 16 e− Unsaturated [TpMe2IrIII(C6H5)2] Moiety

The complex [Tp^Me2Ir(C₆H₅)₂(N₂)] reacts with several 2‐substituted pyridines to generate N‐heterocyclic carbenes resulting from a formal 1,2‐hydrogen shift from C₆ to N. In this paper we provide a detailed report of the scope and the mechanistic aspects (both experimental and theoretical) of the tautomerisation of 2‐substituted pyridines.     

Pyridine‐Enhanced Head‐to‐Tail Dimerization of Terminal Alkynes by a Rhodium–N‐Heterocyclic‐Carbene Catalyst

A general regioselective rhodium‐catalyzed head‐to‐tail dimerization of terminal alkynes is presented. The presence of a pyridine ligand (py) in a Rh–N‐heterocyclic‐carbene (NHC) catalytic system not only dramatically switches the chemoselectivity from alkyne cyclotrimerization to dimerization but also enhances the catalytic activity. Several intermediates have been detected in the catalytic process, including the π‐alkyne‐coordinated Rh^I species [RhCl(NHC)(η²‐HC?CCH₂Ph)(py)] ( 3 ) and [RhCl(NHC){η²‐C(tBu)?C(E)CH?CHtBu}(py)] ( 4 ) and the Rh^III–hydride–alkynyl species [RhClH{? C?CSi(Me)₃}(IPr)(py)₂] ( 5 ). Computational DFT studies reveal an operational mechanism consisting of sequential alkyne C? H oxidative addition, alkyne insertion, and reductive elimination. A 2,1‐hydrometalation of the alkyne is the more favorable pathway in accordance with a head‐to‐tail selectivity.     

Ruthenium‐Catalyzed α‐(Hetero)Arylation of Saturated Cyclic Amines: Reaction Scope and Mechanism

Transition‐metal‐catalyzed sp³ C? H activation has emerged as a powerful approach to functionalize saturated cyclic amines. Our group recently disclosed a direct catalytic arylation reaction of piperidines at the α position to the nitrogen atom. 1‐(Pyridin‐2‐yl)piperidine could be smoothly α‐arylated if treated with an arylboronic ester in the presence of a catalytic amount of [Ru₃(CO)₁₂] and one equivalent of 3‐ethyl‐3‐pentanol. A systematic study on the substrate and reagent scope of this transformation is disclosed in this paper. The effect of substitution on both the piperidine ring and the arylboronic ester has been investigated. Smaller (pyrrolidine) and larger (azepane) saturated ring systems, as well as benzoannulated derivatives, were found to be compatible substrates with the α‐arylation protocol. The successful use of a variety of heteroarylboronic esters as coupling partners further proved the power of this direct functionalization method. Mechanistic studies have allowed for a better understanding of the catalytic cycle of this remarkable transformation featuring an unprecedented direct transmetalation on a Ru^II? H species.     

Deprotonation of C‐Alkyl Groups of Cationic Triruthenium Clusters Containing Cyclometalated C‐Alkylpyrazinium Ligands: Experimental and Computational Studies

The C‐alkyl groups of cationic triruthenium cluster complexes of the type [Ru₃(μ‐H)(μ‐κ²N¹,C² ‐L)(CO)₁₀]⁺ (HL represents a generic C‐alkyl‐N‐methylpyrazium species) have been deprotonated to give kinetic products that contain unprecedented C‐alkylidene derivatives and maintain the original edge‐bridged decacarbonyl structure. When the starting complexes contain various C‐alkyl groups, the selectivity of these deprotonation reactions is related to the atomic charges of the alkyl H atoms, as suggested by DFT/natural‐bond orbital (NBO) calculations. Three additional electronic properties of the C‐alkyl C? H bonds have also been found to correlate with the experimental regioselectivity because, in all cases, the deprotonated C? H bond has the smallest electron density at the bond critical point, the greatest Laplacian of the electron density at the bond critical point, and the greatest total energy density ratio at the bond critical point (computed by using the quantum theory of atoms in molecules, QTAIM). The kinetic decacarbonyl products evolve, under appropriate reaction conditions that depend upon the position of the C‐alkylidene group in the heterocyclic ring, toward face‐capped nonacarbonyl derivatives (thermodynamic products). The position of the C‐alkylidene group in the heterocyclic ring determines the distribution of single and double bonds within the ligand ring, which strongly affects the stability of the neutral decacarbonyl complexes and the way these ligands coordinate to the metal atoms in the nonacarbonyl products. The mechanisms of these decacarbonylation processes have been investigated by DFT methods, which have rationalized the structures observed for the final products and have shed light on the different kinetic and thermodynamic stabilities of the reaction intermediates, thus explaining the reaction conditions experimentally required by each transformation.     

Post‐Modification of meso–meso‐Linked Porphyrin Arrays by Iridium and Rhodium Catalyses for Tuning of Energy Gap

Skillfully attached! meso–meso‐Linked diporphyrins can be efficiently and selectively functionalized with multiple unsaturated carboxylic acid groups through iridium and rhodium catalyses. This post‐modification strategy allows fine‐tuning of energy levels of each porphyrin unit.

     

Three‐Coordinate Nickel(I) Complexes Stabilised by Six‐, Seven‐ and Eight‐Membered Ring N‐Heterocyclic Carbenes: Synthesis,EPR/DFT Studies and Catalytic Activity

Comproportionation of [Ni(cod)₂] (cod=cyclooctadiene) and [Ni(PPh₃)₂X₂] (X=Br, Cl) in the presence of six‐, seven‐ and eight‐membered ring N‐aryl‐substituted heterocyclic carbenes (NHCs) provides a route to a series of isostructural three‐coordinate Ni^I complexes [Ni(NHC)(PPh₃)X] (X=Br, Cl; NHC=6‐Mes 1 , 6‐Anis 2 , 6‐AnisMes 3 , 7‐o‐Tol 4 , 8‐Mes 5 , 8‐o‐Tol 6 , O‐8‐o‐Tol 7 ). Continuous wave (CW) and pulsed EPR measurements on 1 , 4 , 5 , 6 and 7 reveal that the spin Hamiltonian parameters are particularly sensitive to changes in NHC ring size, N substituents and halide. In combination with DFT calculations, a mixed SOMO of ∣3d〉 and ∣3d〉 character, which was found to be dependent on the complex geometry, was observed and this was compared to the experimental g values obtained from the EPR spectra. A pronounced ³¹P superhyperfine coupling to the PPh₃ group was also identified, consistent with the large spin density on the phosphorus, along with partially resolved bromine couplings. The use of 1 , 4 , 5 and 6 as pre‐catalysts for the Kumada coupling of aryl chlorides and fluorides with ArMgY (Ar=Ph, Mes) showed the highest activity for the smaller ring systems and/or smaller substituents (i.e., 1 > 4 ≈ 6 ? 5 ).