Periodic Mesoporous Organosilicas with Helical and Concentric Circular Pore Architectures

This study systematically investigates periodic mesoporous organosilicas (PMOs) with controlled helical and concentric circular (CC) pore architectures prepared through a basic‐catalyzed sol–gel process by using an achiral cationic surfactant trimethyloctadecylammonium bromide (C₁₈TAB) as a structure‐directing agent, perfluorooctanoic acid (PFOA) as an additive, and 1,2‐bis(triethoxysilyl)ethane (BTEE) as a hybrid silica precursor. By increasing the weight ratio of PFOA/C₁₈TAB, a pore architecture transition of PMO materials from hexagonal‐arrayed, straight longitudinal channels to helical and CC mesostructures is achieved; such a transition has not been observed before in PMO materials. Our discovery is helpful in understanding the supramolecular cooperative assembly of hybrid materials and their structural and morphological evolution, which are important in the future applications of PMO materials.     

Synthesis of Large‐Pore Urea‐Bridged Periodic Mesoporous Organosilicas

Bringing order : A new class of periodic mesoporous organosilicas (PMOs) with a urea‐bridged organosilica precursor under acid‐catalyzed and inorganic‐salt‐assisted conditions was obtained. The large‐pore hybrid materials have ordered mesostructure with uniform pore size distributions, which can be seen from the TEM images.

     

Tartardiamide‐Functionalized Chiral Organosilicas with Highly Ordered Mesoporous Structure

A novel chiral mesoporous organosilica with L ‐tartardiamide moieties integrated in the backbone has been synthesized for the first time by a mild synthetic approach with block copolymer P123 as a template. The materials have highly ordered 2D hexagonal mesostructure and uniform pore size in the range of 7.6 to 5.5 nm. NMR, IR, and TG analyses confirm that the tartardiamide group was successfully incorporated into the framework. The intrinsic chirality of L ‐tartardiamide endows the materials with unique optical activities and chiral‐recognition properties. By dissolving the materials into NaOH, the solutions show rotation of polarized light by +8.42° to +15.53°, depending on the amount of the chiral moieties in the materials. Owing to the chirality of L ‐tartardiamide, the materials exhibited chiral‐induction ability in the epoxidation of allyl alcohol, thus further demonstrating the chirality of the materials.     

Bottom‐Up Construction of Mesoporous Nanotubes from 78‐Component Self‐Assembled Nanobarrels

Segmental and continuous hexagonal‐packed mesoporous metal–organic nanotubes (MMONTs) with outside diameters of up to 4.5 nm and channel sizes of 2.4 nm were hierarchically constructed by a rational multicomponent self‐assembly process involving starting from [L₂Pd₂(NO₃)₂] (L=o‐phenanthroline or 2,2′‐bipyridine) and 4‐pyridinyl‐3‐pyrazole. An unprecedented crystallization‐driven cross‐linking between discrete nanobarrel building units by spontaneous loss of the capping ligands to form infinite nanotubes was observed. Such a barrel‐to‐tube transformation provides new possibilities for the fabrication of MMONTs using the solution bottom‐up approach.     

A Single‐Step Synthesis of Electroactive Mesoporous ProDOT‐Silica Structures

The single‐step preparation of highly ordered mesoporous silica hybrid nanocomposites with conjugated polymers was explored using a novel cationic 3,4‐propylenedioxythiophene (ProDOT) surfactant (PrS). The method does not require high‐temperature calcination or a washing procedure. The combination of self‐assembly of the silica surfactant and in situ polymerization of the ProDOT tail is responsible for creation of the mesoporosity with ultralarge pores, large pore volume, and electroactivity. As this novel material exhibits excellent textural parameters together with electrical conductivity, we believe that this could find potential applications in various fields. This novel concept of creating mesoporosity without a calcination process is a significant breakthrough in the field of mesoporous materials and the method can be further generalized as a rational preparation of various mesoporous hybrid materials having different structures and pore diameters.     

A General Method for Preparing Bridged Organosilanes with Pendant Functional Groups and Functional Mesoporous Organosilicas

New organosilica precursors containing two triethoxysilyl groups suitable for the organosilica material formation through the sol‐gel process were designed and synthesised. These precursors display alkyne or azide groups for attaching targeted functional groups by copper‐catalysed azide–alkyne cycloaddition (CuAAC) and can be used for the preparation of functional organosilicas following two strategies: 1) the functional group is first appended by CuAAC under anhydrous conditions, then the functional material is prepared by the sol‐gel process; 2) the precursor is first subjected to the sol‐gel process, producing porous, clickable bridged silsesquioxanes or periodic mesoporous organosilicas (PMOs), then the desired functional groups are attached by means of CuAAC. Herein, we show the feasibility of both approaches. A series of bridged bis(triethoxysilane)s with different pending organic moieties was prepared, demonstrating the compatibility of the first approach with many functional groups. In particular, we demonstrate that organic functional molecules bearing only one derivatisation site can be used to produce bridged organosilanes and bridged silsesquioxanes. In the second approach, clickable PMOs and porous bridged silsesquioxanes were prepared from the alkyne‐ or azide‐containing precursors, and thereafter, functionalised with complementary model azide‐ or alkyne‐containing molecules. These results confirmed the potential of this approach as a general methodology for preparing functional organosilicas with high loadings of functional groups. Both approaches give rise to a wide range of new functional organosilica materials.     

Synthesis of Continuous Mesoporous Alumina Films with Large‐Sized Cage‐Type Mesopores by Using Diblock Copolymers

Mesoporous alumina films with large‐sized cage‐type mesopores were prepared by using commercially available diblock copolymer (PS‐b‐PEO) and economic inorganic salt (AlCl₃) as aluminum source. The obtained mesopore sizes drastically expand from 35 nm to 80 nm when the amount of ethanol in the precursor solutions were controlled. More interestingly, under an optimized amount of ethanol as co‐solvent, there was no significant change of micelle morphology on the substrate, even though the relative amount of PS‐b‐PEO to alumina source was dramatically varied. When the amount of alumina precursor was decreased, the pore walls gradually became thinner, thereby improving pore connectivity. The ordered mesoporous alumina films obtained in this study exhibit high thermal stability up to 1000 °C, and their frameworks are successfully crystallized to γ‐alumina phase. This technique could also be applicable for creating other metal oxide thin films with large mesopores.     

Ordered Mesoporous Thin Films of Rutile TiO2 Nanocrystals Mixed with Amorphous Ta2O5

Ordered mesoporous thin films of composites of rutile TiO₂ nanocrystals with amorphous Ta₂O₅ are fabricated by evaporation‐induced self‐assembly followed by subsequent heat treatment beyond 780 °C. Incorporation of selected amounts of Ta₂O₅ (20 mol %) in the mesoporous TiO₂ film, together with the unique mesoporous structure itself, increased the onset of crystallization temperature which is high enough to ensure the crystallization of amorphous titania to rutile. The ordered mesoporous structure benefits from a block‐copolymer template, which stabilizes the mesostructure of the amorphous mixed oxides before crystallization. The surface and in‐depth composition analysis by X‐ray photoelectron spectroscopy suggests a homogeneous intermixing of the two oxides in the thin film. A detailed X‐ray absorption fine structure measurement on the composite film containing 20 mol % Ta₂O₅ and heated to 800 °C confirms the amorphous nature of the Ta₂O₅ phase. Photocatalytic activity evaluation suggests that the rutile nanocrystals in the synthesized ordered mesoporous thin film possess good ability to assist the photodegradation of rhodamine B in water under illumination by UV light.     

Highly Carboxylic‐Acid‐Functionalized Ethane‐Bridged Periodic Mesoporous Organosilicas: Synthesis,Characterization, and Adsorption Properties

Functionalization of periodic mesoporous organosilicas (PMOs) with high loadings of pendant organic groups to form bifunctional PMOs with ordered mesostructures remains a challenging objective. Herein, we report that well‐ordered ethane‐bridged PMOs functionalized with exceptionally high loadings of pendant carboxylic acid groups (up to 80 mol % based on silica) were synthesized by the co‐condensation of 1,4‐bis(trimethoxysilyl)ethane (BTME) and carboxyethylsilanetriol sodium salt (CES) with Pluronic P123 as the template and KCl as an additive under acidic conditions. The bifunctional materials were characterized by using a variety of techniques, including powder X‐ray diffraction, nitrogen‐adsorption/desorption, TEM, and solid‐state ¹³C and ²⁹Si NMR spectroscopy. Zeta‐potential measurements showed that the surface negative charges increased with increasing the CES content. This property makes them potential candidates for applications in drug adsorption. The excellent adsorption capacity of these bifunctional PMOs towards an anticancer drug (doxorubicin) was also demonstrated.     

Mesoporous Alumina from Colloidal Biotemplating of Al Clusters

A simple and green synthesis route was disclosed for the achievement of mesoporous alumina microparticles employing polysaccharide nanoparticles (α‐chitin nanorods) as templates. Pore textures can be tuned by the cationic alumina precursor. Compared to small cations, the use of Al₁₃ and Al₃₀ oxo‐hydroxo clusters leads to better defined and elongated mesopores. Electron microscopy and spectroscopic (¹³C, ²⁷Al NMR, XPS) measurements demonstrated that this is related to the effective coating of α‐chitin nanorods by these pre‐condensed colloids.     

Oligo(p‐phenylene‐ethynylene)‐Derived Super‐π‐Gelators with Tunable Emission and Self‐Assembled Polymorphic Structures

Linear π‐conjugated oligomers are known to form organogels through noncovalent interactions. Herein, we report the effect of π‐repeat units on the gelation and morphological properties of three different oligo(p‐phenylene‐ethynylene)s: OPE3 , OPE5 , and OPE7 . All of these molecules form fluorescent gels in nonpolar solvents at low critical gel concentrations, thereby resulting in a blue gel for OPE3 , a green gel for OPE5 , and a greenish yellow gel for OPE7 . The molecule–molecule and molecule–substrate interactions in these OPEs are strongly influenced by the conjugation length of the molecules. Silicon wafer suppresses substrate–molecule interactions whereas a mica surface facilitates such interactions. At lower concentrations, OPE3 formed vesicular assemblies and OPE5 gave entangled fibers, whereas OPE7 resulted in spiral assemblies on a mica surface. At higher concentrations, OPE3 and OPE5 resulted in super‐bundles of fibers and flowerlike short‐fiber agglomerates when different conditions were applied. The number of polymorphic structures increases on increasing the conjugation length, as seen in the case of OPE7 with n=5, which resulted in a variety of exotic structures, the formation of which could be controlled by varying the substrate, concentration, and humidity.     

Light‐Harvesting Three‐Chromophore Systems Based on Biphenyl‐Bridged Periodic Mesoporous Organosilica

Three‐chromophore systems with light‐harvesting behavior were prepared, which are based on periodic mesoporous organosilica (PMO) with crystal‐like ordered structure. The organic bridges of biphenyl‐PMO in the pore walls act as donors and two types of dye are incorporated in the one‐dimensional channels. Consecutive two‐step‐Förster resonance energy transfer is observed from the biphenyl moieties to mediators (diethyl‐aminocoumarin or aminoacridone), followed by energy transfer from mediators to acceptors (dibenzothiacarbocyanine, indodicarbocyanine, sulforhodamine G). High energy‐transfer efficiencies ranging from 70 to 80 % are obtained for two‐step‐FRET, indicating that the mesochannel structure with one‐dimensional ordering provides spatial arrangement of chromophore pairs for an efficient direct energy transfer. The emission wavelength can be tuned by a choice of acceptor dye: 477 nm (diethylaminocoumarin), 519 nm (aminoacridone), 567 nm (sulforhodamine G), 630 nm (dibenzothiacarbocyanine), and 692 nm (indodicarbocyanine).     

Step‐Up Synthesis of Periodic Mesoporous Organosilicas with a Tyrosine Framework and Performance in Horseradish Peroxidase Immobilization

New amino‐acid‐bridged periodic mesoporous organosilicas (PMOs) were constructed by hydrolysis and condensation reactions under acid conditions in the presence of a template. The tyrosine bissilylated organic precursor (TBOS) was first prepared through a multistep reaction by using tyrosine (a natural amino acid) as the starting material. PMOs with the tyrosine framework (Tyr‐PMOs) were constructed by simultaneously using TBOS and tetraethoxysilane as complex silicon sources in the condensation process. All the Tyr‐PMOs materials were characterized by XRD, FTIR spectroscopy, N₂ adsorption–desorption, TEM, SEM, and solid‐state ²⁹Si NMR spectroscopy to confirm the structure. The horseradish peroxidase (HRP) enzyme was first immobilized on these new Tyr‐PMOs materials. Optimal conditions for enzyme adsorption included a temperature of 40 °C, a time of 8 h, and a pH value of 7. Furthermore, the novel Tyr‐PMOs materials could store HRP for approximately 40 days and maintained the enzymatic activity, and the Tyr‐PMOs–10 % HRP with the best immobilization effect could be reused at least eight times.     

Highly Ordered Mesoporous Few‐Layer Graphene Frameworks Enabled by Fe3O4 Nanocrystal Superlattices

While great progress has been achieved in the synthesis of ordered mesoporous carbons in the past decade, it still remains a challenge to prepare highly graphitic frameworks with ordered mesoporosity and high surface area. Reported herein is a simple synthetic methodology, based on the conversion of self‐assembled superlattices of Fe₃O₄ nanocrystals, to fabricate highly ordered mesoporous graphene frameworks (MGFs) with ultrathin pore walls consisting of three to six stacking graphene layers. The MGFs possess face‐centered‐cubic symmetry with interconnected mesoporosity, tunable pore width, and high surface area. Because of their unique architectures and superior structural durability, the MGFs exhibit excellent cycling stability and rate performance when used as anode materials for lithium‐ion batteries, thus retaining a specific capacity of 520 mAh g^?1 at a current density of 300 mA g^?1 after 400 cycles.     

A Highly‐Ordered 3D Covalent Fullerene Framework

A highly‐ordered 3D covalent fullerene framework is presented with a structure based on octahedrally functionalized fullerene building blocks in which every fullerene is separated from the next by six functional groups and whose mesoporosity is controlled by cooperative self‐assembly with a liquid‐crystalline block copolymer. The new fullerene‐framework material was obtained in the form of supported films by spin coating the synthesis solution directly on glass or silicon substrates, followed by a heat treatment. The fullerene building blocks coassemble with a liquid‐crystalline block copolymer to produce a highly ordered covalent fullerene framework with orthorhombic Fmmm symmetry, accessible 7.5 nm pores, and high surface area, as revealed by gas adsorption, NMR spectroscopy, small‐angle X‐ray scattering (SAXS), and TEM. We also note that the 3D covalent fullerene framework exhibits a dielectric constant significantly lower than that of the nonporous precursor material.     

Periodic Mesoporous Organosilica with Molecular‐Scale Ordering Self‐Assembled by Hydrogen Bonds

Nanoporous materials with functional frameworks have attracted attention because of their potential for various applications. Silica‐based mesoporous materials generally consist of amorphous frameworks, whereas a molecular‐scale lamellar ordering within the pore wall has been found for periodic mesoporous organosilicas (PMOs) prepared from bridged organosilane precursors. Formation of a “crystal‐like” framework has been expected to significantly change the physical and chemical properties of PMOs. However, until now, there has been no report on other crystal‐like arrangements. Here, we report a new molecular‐scale ordering induced for a PMO. Our strategy is to form pore walls from precursors exhibiting directional H‐bonding interaction. We demonstrate that the H‐bonded organosilica columns are hexagonally packed within the pore walls. We also show that the H‐bonded pore walls can stably accommodate H‐bonding guest molecules, which represents a new method of modifying the PMO framework.     

Hierarchical Mesoporous Silica Fabricated from an ABC Triblock Terpolymer as a Single Template

Hierarchical mesoporous silicas containing two kinds of mesoporous size are successfully synthesized using the simple evaporation‐induced self‐assembly (EISA) strategy. Two blocks of hydrophobic segments (PE and PCL) in the poly(ethylene‐block‐ethylene oxide‐block‐ϵ‐caprolactone) (PE‐PEO‐PCL) triblock copolymer are involved in the two types of mesopore after calcination, the PE segment being attributed to the face‐centered cubic (fcc) morphology (spherical pores) and the PCL segment attributed to the tetragonal cylinder structure (cylindrical pores).     

Gelation‐Induced Enhanced Fluorescence Emission from Organogels of Salicylanilide‐Containing Compounds Exhibiting Excited‐State Intramolecular Proton Transfer: Synthesis and Self‐Assembly

Self‐assembly structure, stability, hydrogen‐bonding interaction, and optical properties of a new class of low molecular weight organogelators (LMOGs) formed by salicylanilides 3 and 4 have been investigated by field‐emission scanning electron microscopy (FESEM), X‐ray diffraction (XRD), UV/Vis absorption and photoluminescence, as well as theoretical studies by DFT and semiempirical calculations with CI (AM1/PECI=8) methods. It was found that salicylanilides form gels in nonpolar solvents due to π‐stacking interaction complemented by the presence of both inter‐ and intramolecular hydrogen bonding. The supramolecular arrangement in these organogels predicted by XRD shows lamellar and hexagonal columnar structures for gelators 3 and 4 , respectively. Of particular interest is the observation of significant fluorescence enhancement accompanying gelation, which was ascribed to the formation of J‐aggregates and inhibition of intramolecular rotation in the gel state.     

Synthesis,Bifunctionalization, and Remarkable Adsorption Performance of Benzene‐Bridged Periodic Mesoporous Organosilicas Functionalized with High Loadings of Carboxylic Acids

Highly ordered benzene‐bridged periodic mesoporous organosilicas (PMOs) that were functionalized with exceptionally high loadings of carboxylic acid groups (COOH), up to 80 mol % based on silica, have been synthesized and their use as adsorbents for the adsorption of methylene blue (MB), a basic dye pollutant, and for the loading and release of doxorubicin (DOX), an anticancer drug, is demonstrated. These COOH‐functionalized benzene? silicas were synthesized by the co‐condensation of 1,4‐bis(triethoxysilyl) benzene (BTEB) and carboxyethylsilanetriol sodium salt (CES), an organosilane that contained a carboxylic acid group, in the presence of non‐ionic oligomeric surfactant Brij 76 in acidic medium. The materials thus obtained were characterized by a variety of techniques, including powder X‐ray diffraction (XRD), nitrogen‐adsorption/desorption isotherms, TEM, and ¹³C and ²⁹Si solid‐state NMR spectroscopy. Owing to the exceptionally high loadings of COOH groups, their high surface areas, and possible π? π‐stacking interactions, these adsorbents have very high adsorption capacities and extremely rapid adsorption rates for MB removal and for the controlled loading/release of DOX, thus manifesting their great potential for environmental and biomedical applications.     

Ethane‐Bridged Periodic Mesoporous Organosilicas Functionalized with High Loadings of Carboxylic Acid Groups: Synthesis,Bifunctionalization, and Fabrication of Metal Nanoparticles

Well‐ordered periodic mesoporous organosilicas (PMOs) functionalized with high contents of carboxylic acid (?COOH) groups, up to 85 mol % based on silica, were synthesized by co‐condensation of 1,2‐bis(triethoxysilyl)ethane (BTEE) and carboxyethylsilanetriol sodium salt (CES) under acidic conditions by using alkyl poly(oxyethylene) surfactant Brij 76 as a structure‐directing agent. A variety of techniques including powder X‐ray diffraction (XRD), nitrogen adsorption/desorption, Fourier‐transformed infrared (FTIR), transmission electron microscopy (TEM), ¹³C‐ and ²⁹Si solid‐state nuclear magnetic resonance (NMR) were used to characterize the products. The materials thus obtained were used as an effective support to synthesize metal nanoparticles (Ag and Pt) within the channel of 2D hexagonal mesostructure of PMOs. The size and distribution of the nanoparticles were observed to be highly dependent on the interaction between the carboxylic acid functionalized group and the metal precursors. The size of Pt nanoparticles reduced from 3.6 to 2.5 nm and that of Ag nanoparticles reduced from 5.3 to 3.4 nm with the increase in the ?COOH loading from 10 to 50 %.