An Oxygen‐Tolerant PET‐RAFT Polymerization for Screening Structure–Activity Relationships

The complexity of polymer–protein interactions makes rational design of the best polymer architecture for any given biointerface extremely challenging, and the high throughput synthesis and screening of polymers has emerged as an attractive alternative. A porphyrin‐catalysed photoinduced electron/energy transfer–reversible addition‐fragmentation chain‐transfer (PET‐RAFT) polymerisation was adapted to enable high throughput synthesis of complex polymer architectures in dimethyl sulfoxide (DMSO) on low‐volume well plates in the presence of air. The polymerisation system shows remarkable oxygen tolerance, and excellent control of functional 3‐ and 4‐arm star polymers. We then apply this method to investigate the effect of polymer structure on protein binding, in this case to the lectin concanavalin A (ConA). Such an approach could be applied to screen the structure–activity relationships for any number of polymer–protein interactions.     

End‐Group‐Functionalized Poly(α‐olefinates) as Non‐Polar Building Blocks: Self‐Assembly of Sugar–Polyolefin Hybrid Conjugates

Living coordinative chain‐transfer polymerization of α‐olefins, followed by chemical functionalization of a Zn(polymeryl)₂ intermediate, provides entry to end‐group functionalized poly(α‐olefinates) (x‐PAOs) that can serve as a new class of non‐polar building block with tailorable occupied volumes. Application of these x‐PAOs for the synthesis and self‐assembly of sugar‐polyolefin hybrid conjugates demonstrate the ability to manipulate the morphology of the ultra‐thin film nanostructure through variation in occupied volume of the x‐PAO domain.     

SuFEx‐Based Synthesis of Polysulfates

High‐molecular‐weight polysulfates are readily formed from aromatic bis(silyl ethers) and bis(fluorosulfates) in the presence of a base catalyst. The reaction is fast and proceeds well under neat conditions or in solvents, such as dimethyl formamide or N‐methylpyrrolidone, to provide the desired polymers in nearly quantitative yield. These polymers are more resistant to chemical degradation than their polycarbonate analogues and exhibit excellent mechanical, optical, and oxygen‐barrier properties.     

Designed Synthesis of a 1D Polymer in Twist‐Stacked Topology via Single‐Crystal‐to‐Single‐Crystal Polymerization

To synthesize a fully organic 1D polymer in a novel twist‐stacked topology, we designed a peptide monomer HC≡CCH₂‐NH‐Ile‐Leu‐N₃, which crystallizes with its molecules H‐bonded along a six‐fold screw axis. These H‐bonded columns pack parallelly such that molecules arrange head‐to‐tail, forming linear non‐covalent chains in planes perpendicular to the screw axis. The chains arrange parallelly to form molecular layers which twist‐stack along the screw axis. Crystals of this monomer, on heating, undergo single‐crystal‐to‐single‐crystal (SCSC) topochemical azide–alkyne cycloaddition (TAAC) polymerization to yield an exclusively 1,4‐triazole‐linked polymer in a twist‐stacked layered topology. This topologically defined polymer shows better mechanical strength and thermal stability than its unordered form, as evidenced by nanoindentation studies and thermogravimetric analysis, respectively. This work illustrates the scope of topochemical polymerizations for synthesizing polymers in pre‐decided topologies.     

Synthesis and thermoreversible gelation of dendron‐like polypeptide/linear poly(ε‐caprolactone)/dendron‐like polypeptide triblock copolymers

Dendron‐like poly(γ‐benzyl‐L ‐glutamate)/linear poly(ε‐caprolactone)/dendron‐like poly(γ‐benzyl‐L ‐glutamate) triblock copolymers having 2^{m + 1} PBLG branches (denoted as PBLG‐Dm‐PCL‐Dm‐PBLG, m = 0, 1, 2, and 3) were for the first time synthesized by utilizing ring‐opening polymerization (ROP) and click chemistry. The bifunctional azide‐terminated PCL (N₃‐PCL‐N₃) was click conjugated with propargyl focal point PAMAM‐typed dendrons Dm to generate Dm‐PCL‐Dm, which was then used as macroinitiator for the ROP of BLG‐NCA monomer to produce the targeted PBLG‐Dm‐PCL‐Dm‐PBLG triblock copolymers. Their molecular structures and physical properties were characterized in detail by FTIR, NMR, gel permeation chromatography, differential scanning calorimetry, and wide angle X‐ray diffraction (WAXD). The crystallinity of the central PCL segment within these copolymers is increasingly suppressed by the flanking PBLG wedges, whereas the PBLG segments gradually changed from a β‐sheet conformation to an α‐helix conformation with the increasing PBLG branches. These triblock copolymers formed thermoreversible organogels in toluene, and the dendritic topology of PBLG wedges controlled their critical gelation concentrations. The self‐assembled structure of organogels was further characterized by means of transmission electron microscopy, WAXD, and small‐angle X‐ray scattering. The fibers with flat ribbon morphology were clearly shown, and the gelation occurred through a self‐assembled nanoribbon mechanism. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 709–718, 2010     

SET‐RAFT Polymerization of Progargyl Methacrylate and a One‐Pot/One‐Step Preparation of Side‐chain Functionalized Polymers via Combination of SET‐RAFT and Click Chemistry

A clickable alkyne monomer, PgMA, was successfully polymerized in a well‐controlled manner via single electron transfer initiation and propagation through the radical addition fragmentation chain transfer (SET‐RAFT) method. The living nature of the polymerization was confirmed by the first‐order kinetic plots, the linear relationships between molecular weights and the monomer conversions while keeping relatively narrow (≤1.55), and the successful chain‐extension with MMA. The better controllability of SET‐RAFT than other CRP methods is attributed to the less competitive termination in view of the presence of the CTA as well as the Cu(II) that is generated in situ. Moreover, a one‐pot/one‐step technique combining SET‐RAFT and “click chemistry” methods has been successfully employed to prepare the side‐chain functionalized polymers.

     

Synthesis and characterization of saccharide‐based latex particles

The synthesis of new polymer colloids based on renewable resources, such as sugar‐derived monomers, is nowadays a matter of interest. These new polymeric particles should be useful in biomedical applications, such as drug delivery, because of their assumed biodegradability. In this work, two new families of polymer latex particles, based on a sugar‐derived monomer, 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG), were produced and characterized. The syntheses of poly(3‐MDG) crosslinked particles and those obtained by copolymerization with methacrylic acid (MAA), poly(3‐MDG‐co‐MAA) crosslinked particles, were prepared by surfactant‐free emulsion polymerization in a batch reactor. The average particle diameter evolutions, the effect of pH of the dispersion medium on the final average diameters, together with the microscopic and morphological analysis of the particle's surface and inner dominium, were analyzed. Poly(3‐MDG‐co‐EGDMA) stable particles were obtained by adding low amounts of initiator. The surface‐charge density of these particles corresponded to the sulfate groups coming from the initiator. In the second family of latices, poly(3‐MDG‐co‐MAA‐co‐EGDMA) particles, DCP measurements and SEM and TEM observations showed that the sizes and surface characteristics depended on the amounts of MAA and crosslinker used in the reaction mixture. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 443–457, 2006     

Biotin α‐End‐Functionalized Gradient Glycopolymers Synthesized by RAFT Copolymerization

Biotinylated gradient glycopolymers have been synthesized via RAFT copolymerization of an acrylamide derivative of galactose with N‐acryloylmorpholine in the presence of a biotin CTA. The polymerization was controlled with a linear increase in molecular weights up to 80% conversion. Copolymer chains have a gradient microstructure with an increasing proportion of galactose units towards the ω chain end. The presence of the biotin ligand at the α end of the chains was confirmed by ¹H NMR and MALDI‐ToF MS. This strategy based on the use of a biotin‐CTA instead of a post‐polymerization labelling of the chains resulted in a high percentage of α‐functionalized chains (92–95%). Such α‐end‐functionalized glycopolymer chains may interact with streptavidin‐modified surfaces.

     

Clickable Nucleic Acids: Sequence‐Controlled Periodic Copolymer/Oligomer Synthesis by Orthogonal Thiol‐X Reactions

Synthetic polymer approaches generally lack the ability to control the primary sequence, with sequence control referred to as the holy grail. Two click chemistry reactions were now combined to form nucleobase‐containing sequence‐controlled polymers in simple polymerization reactions. Two distinct approaches are used to form these click nucleic acid (CNA) polymers. These approaches employ thiol–ene and thiol‐Michael reactions to form homopolymers of a single nucleobase (e.g., poly(A)_n) or homopolymers of specific repeating nucleobase sequences (e.g., poly(ATC)_n). Furthermore, the incorporation of monofunctional thiol‐terminated polymers into the polymerization system enables the preparation of multiblock copolymers in a single reaction vessel; the length of the diblock copolymer can be tuned by the stoichiometric ratio and/or the monomer functionality. These polymers are also used for organogel formation where complementary CNA‐based polymers form reversible crosslinks.     

“Bottom‐Up” Fabrication of BODIPY‐Functionalized Fluorescent Hyperbranched Glycopolymers for Hepatoma‐Targeted Imaging

A novel type of multivalent and highly specific fluorescent hyperbranched glycopolymers h‐P(GalEA‐co‐VBPT‐co‐BYMA) (hPGVB) is designed and prepared successfully via a facile “bottom‐up” strategy. The acetylated hPGVB is prepared by one‐pot reversible addition‐fragmentation chain transfer (RAFT) copolymerization of acrylate‐type galactose monomers AcGalEA and methacrylate‐type fluorescent monomers BYMA in presence of an inimer‐type RAFT chain transfer agent. After deacetylation, the resulting amphiphilic hPGVB can self‐assemble into stable nanoparticles in aqueous media, showing strong green fluorescence with relative high quantum yields and good photostability. The cell viability study indicates the excellent biocompatibility of the hPGVB fluorescent nanoparticles (FNPs) against HepG2 and NIH3T3 cells. More importantly, comparing with the galactose‐free fluorescent hyperbranched polymers h‐P(OEGMA‐co‐VBPT‐co‐BYMA), hPEVB FNPs can be selectively internalized by asialoglycoprotein (ASGP) receptor‐rich HepG2 cells, indicating their potential application in the bioimaging fields.     

β‐Sheet to Helical‐Sheet Evolution Induced by Topochemical Polymerization: Cross‐α‐Amyloid‐like Packing in a Pseudoprotein with Gly‐Phe‐Gly Repeats

Protein‐mimics are of great interest for their structure, stability, and properties. We are interested in the synthesis of protein‐mimics containing triazole linkages as peptide‐bond surrogate by topochemical azide‐alkyne cycloaddition (TAAC) polymerization of azide‐ and alkyne‐modified peptides. The rationally designed dipeptide N₃‐CH₂CO‐Phe‐NHCH₂CCH ( 1 ) crystallized in a parallel β‐sheet arrangement and are head‐to‐tail aligned in a direction perpendicular to the β‐sheet‐direction. Upon heating, crystals of 1 underwent single‐crystal‐to‐single‐crystal polymerization forming a triazole‐linked pseudoprotein with Gly‐Phe‐Gly repeats. During TAAC polymerization, the pseudoprotein evolved as helical chains. These helical chains are laterally assembled by backbone hydrogen bonding in a direction perpendicular to the helical axis to form helical sheets. This interesting helical‐sheet orientation in the crystal resembles the cross‐α‐amyloids, where α‐helices are arranged laterally as sheets.     

Copper Catalysis and Organocatalysis Showing the Way: Synthesis of Selenium‐Containing Highly Functionalized 1,2,3‐Triazoles

This article provides a comprehensive overview of reported methods ‐ particularly copper‐ and organocatalyzed reactions ‐ for the regioselective syntheses of selenium‐containing 1,2,3‐triazoles systems. These chemical entities are prevalent cores in biologically active compounds and functional materials. In view of their unique properties, substantial efforts have been paid for the design and development of practical approaches for the synthesis of these scaffolds.     

Synthesis of End‐Functionalized Polyacetylenes that Contain Polar Groups by Employing Well‐Defined Palladium Catalysts

A series of [(dppf)PdBr(R)]‐type complexes (dppf=1,1′‐bis(diphenylphosphino)ferrocene; R=p‐cyanophenyl ( 1 a ), o‐hydroxymethylphenyl ( 1 b ), and triphenylvinyl ( 1 c )), in combination with silver trifluoromethanesulfonate (AgOTf), were demonstrated to be active for the polymerization of monosubstituted polar acetylene monomers HC?CCONHC₄H₉ ( 2 ), HC?CCO₂C₈H₁₇ ( 3 ), HC?CCH₂OCONHC₆H₁₃ ( 4 ), HC?CCH₂OCO₂C₆H₁₃ ( 5 ), and HC?CCH(CH₃)OH ( 6 ). The yields and molecular weights of the polymers depended on the combination of the Pd catalyst and monomer that was employed. Matrix‐assisted laser‐desorption/ionization–time of flight (MALDI‐TOF) mass spectrometric analysis indicated the formation of polymers that contained the “R” and “H” groups at the chain ends. IR spectroscopic analysis supported the R‐end‐functionalization of the polymers. NMR spectroscopy and MS identified the presence of species that were formed by single, double, and triple insertion of the monomers into the Pd‐C₆H₄‐p‐CN bond, thereby giving solid evidence for an insertion mechanism for the present system. Density functional theory (DFT) calculations suggested the preference for 1,2‐insertion of the monomer compared to 2,1‐insertion.     

Combining Atom Transfer Radical Polymerization and Click Chemistry: A Versatile Method for the Preparation of End‐Functional Polymers

Summary: The bromine chain ends of well‐defined polystyrene ( = 2 700 g · mol⁻¹, = 1.11) prepared using ATRP were successfully transformed into various functional end groups (ω‐hydroxy, ω‐carboxyl and ω‐methyl‐vinyl) by a two‐step pathway: (1) substitution of the bromine terminal atom by an azide function and (2) 1,3‐dipolar cycloaddition of the terminal azide and functional alkynes (propargyl alcohol, propiolic acid and 2‐methyl‐1‐buten‐3‐yne). The “click” cycloaddition was catalyzed efficiently by the system copper bromide/4,4′‐di‐(5‐nonyl)‐2,2′‐bipyridine. In all cases, ¹H NMR spectra indicated quantitative transformation of the chain ends of polystyrene into the desired function.

Preparation of well‐defined functional polymers possessing diverse chain‐end functionalities by the combination of atom transfer radical polymerization and click chemistry.     

Tunable Self‐Assembly of Triazole‐Linked Porphyrin–Polymer Conjugates

The convergence of supramolecular chemistry and polymer science offers many powerful approaches for building functional nanostructures with well‐defined dynamic behaviour. Herein we report the efficient “click” synthesis and self‐assembly of AB₂‐ and AB₄‐type multitopic porphyrin–polymer conjugates (PPCs). PPCs were prepared using the copper(I)‐catalysed azide–alkyne cycloaddition (CuAAC) reaction, and consisted of linear polystyrene, poly(butyl acrylate), or poly(tert‐butyl acrylate) arms attached to a zinc(II) porphyrin core via triazole linkages. We exploit the presence of the triazole groups obtained from CuAAC coupling to direct the self‐assembly of the PPCs into short oligomers (2–6 units in length) via intermolecular porphyrinatozinc–triazole coordination. By altering the length and grafting density of the polymer arms, we demonstrate that the association constant of the porphyrinatozinc–triazole complex can be systematically tuned over two orders of magnitude. Self‐assembly of the PPCs also resulted in a 6 K increase in the glass transition temperature of the bulk material compared to a non‐assembling PPC. The modular synthesis and tunable self‐assembly of the triazole‐linked PPCs thus represents a powerful supramolecular platform for building functional nanostructured materials.     

Recent Advances in the Synthesis and Biomedical Applications of Chain-End Functionalized Glycopolymers

Glycopolymers as multivalent clusters of carbohydrate derivatives have been proven effective tools in the study of carbohydrate-based biological processes and have shown great potential in biomedical applications. It has been found that the shape and size of glycopolymers, as well as the density and relative positioning of their glycan appendages, are very important regarding their effectiveness in bio-interactions. Recently, a variety of chain-end functionalized polymers have been explored for the preparation of structurally well-defined glycopolymers that have potential protein modification and microarray fabrication applications. This review summarizes recent advances in the synthesis and biomedical applications of chain-end functionalized glycopolymers.