Preparation of Polyfunctional Biaryl Derivatives by Cyclolanthanation of 2‐Bromobiaryls and Heterocyclic Analogues Using nBu2LaCl⋅4 LiCl

Various aryl‐ and heteroaryl‐substituted 2‐bromobiaryls are converted to cyclometalated lanthanum intermediates by reaction with nBu₂LaCl?4 LiCl. These resulting lanthanum heterocycles are key intermediates for the facile preparation of functionalized 2,2′‐diiodobiaryls, silafluorenes, fluoren‐9‐ones, phenanthrenes, and their related heterocyclic analogues. X‐ray absorption fine structure (XAFS) spectroscopy was used to rationalize the proposed structures of the involved organolanthanum species.     

Tuning the Magnetization Dynamic Properties of Nd⋅⋅⋅Fe and Nd⋅⋅⋅Co Single‐Molecular Magnets by Introducing 3 d–4 f Magnetic Interactions

By using paramagnetic [Fe(CN)₆]^3? anions in place of diamagnetic [Co(CN)₆]^3? anions, two field‐induced mononuclear single‐molecular magnets, [Nd(18‐crown‐6)(H₂O)₄][Co(CN)₆] ? 2 H₂O ( 1 ) and [Nd(18‐crown‐6)(H₂O)₄][Fe(CN)₆] ? 2 H₂O ( 2 ), have been synthesized and characterized. Single‐crystal X‐ray diffraction analysis revealed that compounds 1 and 2 were ionic complexes. The Nd^III ions were located inside the cavities of the 18‐crown‐6 ligands and were each bound by four water molecules on either side of the crown ether. Magnetic investigations showed that these compounds were both field‐induced single‐molecular magnets. By comparing the slow relaxation behaviors of compounds 1 and 2 , we found significant differences between the direct and Raman processes for these two complexes, with a stronger direct process in compound 2 at low temperatures. Complete active space self‐consistent field (CASSCF) calculations were also performed on two [Nd(18‐crown‐6)(H₂O)₄]³⁺ fragments of compounds 1 and 2 . Ab initio calculations showed that the magnetic anisotropies of the Nd^III centers in complexes 1 and 2 were similar to each other, which indicated that the difference in relaxation behavior was not owing to the magnetic anisotropy of Nd^III. Our analysis showed that the magnetic interaction between the Nd^III ion and the low‐spin Fe^III ion in complex 2 played an important role in enhancing the direct process and suppressing the Raman process of the single‐molecular magnet.     

A Convenient Alumination of Functionalized Aromatics by Using the Frustrated Lewis Pair Et3Al and TMPMgCl⋅LiCl

A straightforward and efficient alumination of functionalized arenes by using the frustrated Lewis pair Et₃Al and TMPMgCl ? LiCl (TMP=2,2,6,6‐tetramethylpiperidyl) has been developed. In particular, halogenated electron‐rich aromatics can be smoothly functionalized by using the frustrated Lewis pair Et₃Al and TMPMgCl ? LiCl. Compared with previously described alumination methods, this procedure avoids extensive cooling and the need for an excess of base. This in situ procedure has proven to be most practical and allows for regio‐ and chemoselective metalation of a wide range of aromatics with sensitive functional groups (CONEt₂, CO₂Me, CN, OCONMe₂) or halogens (F, Cl, Br, I). The resulting aromatic aluminates, which were characterized by using NMR spectroscopy, were subjected to allylations, acylations, and palladium‐catalyzed cross‐coupling reactions after transmetalation to zinc. It was shown that the nature of the Zn salt used for transmetalation is crucial. Thus, compared with ZnCl₂ (2 equiv), the use of Zn(OPiv)₂ (2 equiv; OPiv=pivalate) allows the subsequent quenching reactions to be performed with only a slight excess of electrophile (1.2 equiv) and provides interesting functionalized aromatics in good yields.     

Continuous Flow Magnesiation of Functionalized Heterocycles and Acrylates with TMPMgCl⋅LiCl

A flow procedure for the metalation of functionalized heterocycles (pyridines, pyrimidines, thiophenes, and thiazoles) and various acrylates using the strong, non‐nucleophilic base TMPMgCl?LiCl is reported. The flow conditions allow the magnesiations to be performed under more convenient conditions than the comparable batch reactions, which often require cryogenic temperatures and long reaction times. Moreover, the flow reactions are directly scalable without further optimization. Metalation under flow conditions also allows magnesiations that did not produce the desired products under batch conditions, such as the magnesiation of sensitive acrylic derivatives. The magnesiated species are subsequently quenched with various electrophiles, thereby introducing a broad range of functionalities.     

High‐Pressure Synthesis of Metal–Inorganic Frameworks Hf4N20⋅N2, WN8⋅N2, and Os5N28⋅3 N2 with Polymeric Nitrogen Linkers

Polynitrides are intrinsically thermodynamically unstable at ambient conditions and require peculiar synthetic approaches. Now, a one‐step synthesis of metal–inorganic frameworks Hf₄N₂₀?N₂, WN₈?N₂, and Os₅N₂₈?3 N₂ via direct reactions between elements in a diamond anvil cell at pressures exceeding 100 GPa is reported. The porous frameworks (Hf₄N₂₀, WN₈, and Os₅N₂₈) are built from transition‐metal atoms linked either by polymeric polydiazenediyl (polyacetylene‐like) nitrogen chains or through dinitrogen units. Triply bound dinitrogen molecules occupy channels of these frameworks. Owing to conjugated polydiazenediyl chains, these compounds exhibit metallic properties. The high‐pressure reaction between Hf and N₂ also leads to a non‐centrosymmetric polynitride Hf₂N₁₁ that features double‐helix catena‐poly[tetraz‐1‐ene‐1,4‐diyl] nitrogen chains [?N?N?N=N?]_∞.     

Cooperativity between the Halogen Bond and the Hydrogen Bond in H3N⋅⋅⋅XY⋅⋅⋅HF Complexes (X,Y=F,Cl, Br)

Ab initio calculations are used to provide information on H₃N???XY???HF triads (X, Y=F, Cl, Br) each having a halogen bond and a hydrogen bond. The investigated triads include H₃N???Br₂‐HF, H₃N???Cl₂???HF, H₃N???BrCI???HF, H₃N???BrF???HF, and H₃N???ClF???HF. To understand the properties of the systems better, the corresponding dyads are also investigated. Molecular geometries, binding energies, and infrared spectra of monomers, dyads, and triads are studied at the MP2 level of theory with the 6‐311++G(d,p) basis set. Because the primary aim of this study is to examine cooperative effects, particular attention is given to parameters such as cooperative energies, many‐body interaction energies, and cooperativity factors. The cooperative energy ranges from ?1.45 to ?4.64 kcal mol^?1, the three‐body interaction energy from ?2.17 to ?6.71 kcal mol^?1, and the cooperativity factor from 1.27 to 4.35. These results indicate significant cooperativity between the halogen and hydrogen bonds in these complexes. This cooperativity is much greater than that between hydrogen bonds. The effect of a halogen bond on a hydrogen bond is more pronounced than that of a hydrogen bond on a halogen bond.     

OH⋅⋅⋅N and CH⋅⋅⋅O Hydrogen Bonds Control Hydration of Pivotal Tropane Alkaloids: Tropinone⋅⋅⋅H2O Complex

The effect of monohydration in equatorial/axial isomerism of the common motif of tropane alkaloids is investigated in a supersonic expansion by using Fourier‐transform microwave spectroscopy. The rotational spectrum reveals the equatorial isomer as the dominant species in the tropinone???H₂O complex. The monohydrated complex is stabilized primarily by a moderate O?H???N hydrogen bond. In addition, two C?H???O weak hydrogen bonds also support this structure, blocking the water molecule and avoiding any molecular dynamics in the complex. The water molecule acts as proton donor and chooses the ternary amine group over the carbonyl group as a proton acceptor. The experimental work is supported by theoretical calculations; the accuracy of the B3LYP, M06‐2X, and MP2 methods is also discussed.     

[N⋅⋅⋅I+⋅⋅⋅N] Halogen‐Bonded Dimeric Capsules from Tetrakis(3‐pyridyl)ethylene Cavitands

Two [N???I⁺???N] halogen‐bonded dimeric capsules using tetrakis(3‐pyridyl)ethylene cavitands with different lower rim alkyl chains are synthesized and analyzed in solution and the gas phase. These first examples of symmetrical dimeric capsules making use of the iodonium ion (I⁺) as the main connecting module are characterized by ¹H NMR spectroscopy, diffusion ordered NMR spectroscopy (DOSY), electrospray ionization mass spectrometry (ESI‐MS), and ion mobility‐mass spectrometry (TW‐IMS) experiments. The synthesis and effective halogen‐bonded dimerization proceeds through analogous dimeric capsules with [N???Ag⁺???N] binding motifs as the intermediates as evidenced by the X‐ray structures of (CH₂Cl₂)₂@[ 3 a ₂?Ag₄?(H₂O)₂?OTs₄] and (CH₂Cl₂)₂@[ 3 a ₂?Ag₄?(H₂O)₄?OTs₄], two structurally different capsules.     

Association and Dissociation of Grignard Reagents RMgCl and Their Turbo Variant RMgCl⋅LiCl

Grignard reagents RMgCl and their so‐called turbo variant, the highly reactive RMgCl?LiCl, are of exceptional synthetic utility. Nevertheless, it is still not fully understood which species these compounds form in solution and, in particular, in which way LiCl exerts its reactivity‐enhancing effect. A combination of electrospray‐ionization mass spectrometry, electrical conductivity measurements, NMR spectroscopy (including diffusion‐ordered spectroscopy), and quantum chemical calculations is used to analyze solutions of RMgCl (R=Me, Et, Bu, Hex, Oct, Dec, iPr, tBu, Ph) in tetrahydrofuran and other ethereal solvents in the absence and presence of stoichiometric amounts of LiCl. In tetrahydrofuran, RMgCl forms mononuclear species, which are converted into trinuclear anions as a result of the concentration increase experienced during the electrospray process. These trinuclear anions are theoretically predicted to adopt open cubic geometries, which remarkably resemble structural motifs previously found in the solid state. The molecular constituents of RMgCl and RMgCl?LiCl are interrelated via Schlenk equilibria and fast intermolecular exchange processes. A small portion of the Grignard reagent also forms anionic ate complexes in solution. The abundance of these more electron‐rich and hence supposedly more nucleophilic ate complexes strongly increases upon the addition of LiCl, thus rationalizing its beneficial effect on the reactivity of Grignard reagents.     

Boron as an Electron‐Pair Donor for B⋅⋅⋅Cl Halogen Bonds

MP2/aug′‐cc‐pVTZ calculations were performed to investigate boron as an electron‐pair donor in halogen‐bonded complexes (CO)₂(HB):ClX and (N₂)₂(HB):ClX, for X=F, Cl, OH, NC, CN, CCH, CH₃, and H. Equilibrium halogen‐bonded complexes with boron as the electron‐pair donor are found on all of the potential surfaces, except for (CO)₂(HB):ClCH₃ and (N₂)₂(HB):ClF. The majority of these complexes are stabilized by traditional halogen bonds, except for (CO)₂(HB):ClF, (CO)₂(HB):ClCl, (N₂)₂(HB):ClCl, and (N₂)₂(HB):ClOH, which are stabilized by chlorine‐shared halogen bonds. These complexes have increased binding energies and shorter B?Cl distances. Charge transfer stabilizes all complexes and occurs from the B lone pair to the σ* Cl?A orbital of ClX, in which A is the atom of X directly bonded to Cl. A second reduced charge‐transfer interaction occurs in (CO)₂(HB):ClX complexes from the Cl lone pair to the π* C≡O orbitals. Equation‐of‐motion coupled cluster singles and doubles (EOM‐CCSD) spin–spin coupling constants, ^1xJ(B‐Cl), across the halogen bonds are also indicative of the changing nature of this bond. ^1xJ(B‐Cl) values for both series of complexes are positive at long distances, increase as the distance decreases, and then decrease as the halogen bonds change from traditional to chlorine‐shared bonds, and begin to approach the values for the covalent bonds in the corresponding ions [(CO)₂(HB)?Cl]⁺ and [(N₂)₂(HB)?Cl]⁺. Changes in ¹¹B chemical shieldings upon complexation correlate with changes in the charges on B.     

Walking Metals in d8⋅⋅⋅d8 Hetero‐bimetallic Complexes: An Original Dynamic Phenomenon

In the course of our investigations on polymetallic complexes derived from 1,3‐bis(thiophosphinoyl)indene (Ind(Ph₂P?S)₂), we observed original fluxional behavior and report herein a joint experimental/computational study of this dynamic process. Starting from the indenylidene chloropalladate species [Pd{Ind(Ph₂P?S)₂}Cl]^? ( 1 ), the new Pd^II???Rh^I hetero‐bimetallic pincer complex [PdCl{Ind(Ph₂P?S)₂}Rh(nbd)] ( 2 ; nbd=2,5‐norbornadiene) was prepared. X‐ray crystallography and DFT calculations substantiate the presence of a d⁸???d⁸ interaction. According to multinuclear variable‐temperature NMR spectroscopic experiments, the pendant {Rh(nbd)} fragment of 2 readily shifts in solution at room temperature between the two edges of the SCS tridentate ligand. To assess the role of the pincer‐based polymetallic structure on this fluxional behavior, the related monometallic Rh complex [Rh{IndH(Ph₂P?S)₂}(nbd)] ( 3 ) was prepared. No evidence for a metal shift was observed in that case, even at high temperature, thus indicating that inplane pincer coordination to the Pd center plays a crucial role. The previously described Pd^II???Ir^I bimetallic complex 4 exhibited fluxional behavior in solution, but with a significantly higher activation barrier than 2 . This finding demonstrates the generality of this metal‐shift process and the strong influence of the involved metal centers on the associated activation barrier. DFT calculations were performed to shed light onto the mechanism of such metal‐shift processes and to identify the factors that influence the associated activation barriers. Significantly different pathways were found for bimetallic complexes 2 and 4 on one hand and the monometallic complex 3 on the other hand. The corresponding activation barriers predicted computationally are in very good agreement with the experimental observations.     

Luminescent Benzoquinolate‐Isocyanide Platinum(II) Complexes: Effect of Pt⋅⋅⋅Pt and π⋅⋅⋅π Interactions on their Photophysical Properties

The neutral compounds [Pt(bzq)(CN)(CNR)] (R=tBu ( 1 ), Xyl ( 2 ), 2‐Np ( 3 ); bzq= benzoquinolate, Xyl=2,6‐dimethylphenyl, 2‐Np=2‐napthyl) were isolated as the pure isomers with a trans‐C_bzq,CNR configuration, as confirmed by ¹³C{¹H} NMR spectroscopy in the isotopically marked [Pt(bzq)(¹³CN)(CNR)] (R=tBu ( 1′ ), Xyl ( 2′ ), 2‐Np ( 3′ )) derivatives (δ¹³C_CN≈110 ppm; ¹J(Pt,¹³C)≈1425 Hz]. By contrast, complex [Pt(bzq)(C≡CPh)(CNXyl)] ( 4 ) with a trans‐N_bzq,CNR configuration, has been selectively isolated from [Pt(bzq)Cl(CNXyl)] (trans‐N_bzq,CNR) using Sonogashira conditions. X‐ray diffraction studies reveal that while 1 adopts a columnar‐stacked chain structure with Pt–Pt distances of 3.371(1) Å and significant π???π interactions (3.262 Å), complex 2 forms dimers supported only by short Pt???Pt (3.370(1) Å) interactions. In complex 4 the packing is directed by weak bzq???Xyl and bzq???C≡E (C, N) interactions. In solid state at room temperature, compounds 1 and 2 both show a bright red emission (?=42.1 % 1 , 57.6 % 2 ). Luminescence properties in the solid state at 77 K and concentration‐dependent emission studies in CH₂Cl₂ at 298 K and at 77 K are also reported for 1 , 1·CHCl3 , 2 , 2' , 2·CHCl3 , 3 , 4 .     

Solvent‐Dependent Dihydrogen/Dihydride Stability for [Mo(CO)(Cp*)H2(PMe3)2]+[BF4]− Determined by Multiple Solvent⋅⋅⋅Anion⋅⋅⋅Cation Non‐Covalent Interactions

Low‐temperature (200 K) protonation of [Mo(CO)(Cp*)H(PMe₃)₂] ( 1 ) by Et₂O ? HBF₄ gives a different result depending on a subtle solvent change: The dihydrogen complex [Mo(CO)(Cp*)(η²‐H₂)(PMe₃)₂]⁺ ( 2 ) is obtained in THF, whereas the tautomeric classical dihydride [Mo(CO)(Cp*)(H)₂(PMe₃)₂]⁺ ( 3 ) is the only observable product in dichloromethane. Both products were fully characterised (ν_CO IR; ¹H, ³¹P, ¹³C NMR spectroscopies) at low temperature; they lose H₂ upon warming to 230 K at approximately the same rate (ca. 10^?3 s^?1), with no detection of the non‐classical form in CD₂Cl₂, to generate [Mo(CO)(Cp*)(FBF₃)(PMe₃)₂] ( 4 ). The latter also slowly decomposes at ambient temperature. One of the decomposition products was crystallised and identified by X‐ray crystallography as [Mo(CO)(Cp*)(FH???FBF₃)(PMe₃)₂] ( 5 ), which features a neutral HF ligand coordinated to the transition metal through the F atom and to the BF₄^? anion through a hydrogen bond. The reason for the switch in relative stability between 2 and 3 was probed by DFT calculations based on the B3LYP and M05‐2X functionals, with inclusion of anion and solvent effects by the conductor‐like polarisable continuum model and by explicit consideration of the solvent molecules. Calculations at the MP4(SDQ) and CCSD(T) levels were also carried out for calibration. The calculations reveal the key role of non‐covalent anion–solvent interactions, which modulate the anion–cation interaction ultimately altering the energetic balance between the two isomeric forms.     

Influence of the Homopolar Dihydrogen Bonding CH⋅⋅⋅HC on Coordination Geometry: Experimental and Theoretical Studies

The reaction of the N‐thiophosphorylated thiourea (HOCH₂)(Me)₂CNHC(S)NHP(S)(OiPr)₂ (HL), deprotonated by the thiophosphorylamide group, with NiCl₂ leads to green needles of the pseudotetrahedral complex [Ni(L‐1,5‐S,S′)₂] ? 0.5 (n‐C₆H₁₄) or pale green blocks of the trans square‐planar complex trans‐[Ni(L‐1,5‐S,S′)₂]. The former complex is stabilized by homopolar dihydrogen C?H???H?C interactions formed by n‐hexane solvent molecules with the [Ni(L‐1,5‐S,S′)₂] unit. Furthermore, the dispersion‐dominated C?H??? H?C interactions are, together with other noncovalent interactions (C?H???N, C?H???Ni, C?H???S), responsible for pseudotetrahedral coordination around the Ni^II center in [Ni(L ‐1,5‐S,S′)₂] ? 0.5 (n‐C₆H₁₄).     

Spectroelectrochemistry of EuCl3 in Four Molten Salt Eutectics; 3 LiCl−NaCl, 3 LiCl−2 KCl,LiCl−RbCl,and 3 LiCl−2 CsCl; at 873 K

Key electrochemical properties affecting pyroprocessing of nuclear fuel were examined in four eutectic melts using Eu^3+/2+ as a representative probe. We report the electrochemical and spectroelectrochemical behavior of EuCl₃ in four molten salt eutectics (3 LiCl?NaCl, 3 LiCl?2 KCl, LiCl?RbCl and 3 LiCl?2 CsCl) at 873 K. Cyclic voltammetry was used to determine the reduction potential for Eu^3+/2+ and the applied potentials for spectroelectrochemistry. Single step chronoabsorptometry and thin‐layer spectroelectrochemistry were used to obtain the number of electrons transferred, reduction potentials and diffusion coefficients for Eu³⁺ in each eutectic melt. The reduction potentials determined by thin‐layer spectroelectrochemistry were essentially the same as those obtained using cyclic voltammetry. The diffusion coefficient for Eu³⁺ was the largest in the 3 LiCl?NaCl melt, showed a negative shift in the 3 LiCl?2 KCl melt, and was the smallest in the LiCl?RbCl and 3 LiCl?2 CsCl eutectic melts. The basic one‐electron reversible electron transfer for Eu^3+/2+ was not affected by melt composition.     

The Prominent Enhancing Effect of the Cation–π Interaction on the Halogen–Hydride Halogen Bond in M1⋅⋅⋅C6H5X⋅⋅⋅HM2

We designed M¹???C₆H₅X???HM² (M¹=Li⁺, Na⁺; X=Cl, Br; M²=Li, Na, BeH, MgH) complexes to enhance halogen–hydride halogen bonding with a cation–π interaction. The interaction strength has been estimated mainly in terms of the binding distance and the interaction energy. The results show that halogen–hydride halogen bonding is strengthened greatly by a cation–π interaction. The interaction energy in the triads is two to six times as much as that in the dyads. The largest interaction energy is ?8.31 kcal mol^?1 for the halogen bond in the Li⁺???C₆H₅Br???HNa complex. The nature of the cation, the halogen donor, and the metal hydride influence the nature of the halogen bond. The enhancement effect of Li⁺ on the halogen bond is larger than that of Na⁺. The halogen bond in the Cl donor has a greater enhancement than that in the Br one. The metal hydride imposes its effect in the order HBeH<HMgH<HNa<HLi for the Cl complex and HBeH<HMgH<HLi<HNa for the Br complex. The large cooperative energy indicates that there is a strong interplay between the halogen–hydride halogen bonding and the cation–π interaction. Natural bond orbital and energy decomposition analyses indicate that the electrostatic interaction plays a dominate role in enhancing halogen bonding by a cation–π interaction.     

K⋅⋅⋅F/O Interactions Bridge Copper(I) Fluorinated Alkoxide Complexes and Facilitate Dioxygen Activation

Seven E[Cu(OR)₂] copper(I) complexes (E=K⁺, {K(18C6)}⁺ (18C6=[18]crown‐6), or Ph₄P⁺; R=C₄F₉, CPhMe^F₂, and CMeMe^F₂) have been prepared and their reactivity with O₂ studied. The K[Cu(OR)₂] species react with O₂ in a copper‐concentration‐dependent manner such that 2:1 and 3:1 Cu/O₂ adducts are observed manometrically at ?78 °C. Analogous reactivity with O₂ is not observed with the {K(18C6)}⁺ or Ph₄P⁺ derivatives. Solution conductivity data demonstrate that these K[Cu(OR)₂] complexes do not behave as 1:1 electrolytes in solution. The K⁺ ions induce aggregation of multiple [Cu(OR)₂]^? units through K???F/O interactions and thereby effect irreversible O₂ reduction by multiple Cu centers. Bond valence analyses for the potassium cations confirm the dominance of the fluorine interactions in the coordination spheres of K⁺ ions. Intramolecular hydroxylation of ligand aryl and alkyl C? H bonds is observed. Nucleophilic reactivity with CO₂ is observed for the oxygenated Cu complexes and a Cu^II carbonate has been isolated and characterized.     

The Cage Structure of IndanCHF3 is Based on the Cooperative Effects of CH⋅⋅⋅π and CH⋅⋅⋅F Weak Hydrogen Bonds

The structural and energetic features of the C?H???π interaction and the internal dynamics of the CHF₃ group change drastically in going from benzene?CHF₃ to indan?CHF₃, according to the analysis of the rotational spectrum of the latter complex generated in a supersonic expansion.     

Host–Guest Chemistry: Oxoanion Recognition Based on Combined Charge‐Assisted C−H or Halogen‐Bonding Interactions and Anion⋅⋅⋅Anion Interactions Mediated by Hydrogen Bonds

Several bis‐triazolium‐based receptors have been synthesized and their anion‐recognition capabilities have been studied. The central chiral 1,1′‐bi‐2‐naphthol (BINOL) core features either two aryl or ferrocenyl end‐capped side arms with central halogen‐ or hydrogen‐bonding triazolium receptors. NMR spectroscopic data indicate the simultaneous occurrence of several charge‐assisted aliphatic and heteroaromatic C?H noncovalent interactions and combinations of C?H hydrogen and halogen bonding. The receptors are able to selectively interact with HP₂O₇^3?, H₂PO₄^?, and SO₄^2? anions, and the value of the association constant follows the sequence: HP₂O₇^3?>SO₄^2?>H₂PO₄^?. The ferrocenyl end‐capped 7²⁺?2 BF₄ ^? receptor allows recognition and differentiation of H₂PO₄^? and HP₂O₇^3? anions by using different channels: H₂PO₄^? is selectively detected through absorption and emission methods and HP₂O₇^3? by using electrochemical techniques. Significant structural results are the observation of an anion???anion interaction in the solid state (2:2 complex, 6²⁺? [ H₂P₂O₇ ] ^2? ), and a short C?I???O contact is observed in the structure of the complex [ 8 ²⁺][SO₄]_0.5[BF₄].     

Synthesis of Pyrrolo[2,3‐d]pyrimidines by Copper‐Mediated Carbomagnesiations of N‐Sulfonyl Ynamides and Application to the Preparation of Rigidin A and a 7‐Azaserotonin Derivative

The treatment of readily available N‐alkynyl‐5‐iodo‐6‐sulfamido‐pyrimidines with iPrMgCl?LiCl followed by a transmetalation with CuCN?2 LiCl produces, after intramolecular carbocupration, metalated py r rolo[2,3‐d]pyrimidines. Quenching of these pyrimidines with allylic halides or acid chlorides results in polyfunctional pyrrolo[2,3‐d]pyrimidines. Further reaction with ICl and a Negishi cross‐coupling, using PEPPSI‐iPr as the catalyst, furnishes fully substituted N‐heterocycles. A formal synthesis of the marine alkaloid rigidin A has been achieved as well as the preparation of a derivative of 7‐azaserotonine, related to the natural hormone serotonin.