Synthesis,characterization and catalytic activity of peripherally tetra‐substituted Co(II) phthalocyanines for cyclohexene oxidation

New 3,3‐diphenylpropoxyphthalonitrile (5) was obtained from 3,3‐diphenylpropanol (3) and 4‐nitrophthalonitrile (4) with K₂CO₃ in DMF at 50 °C. The novel cobalt(II) phthalocyanine complexes, tetrakis‐[2‐(1,4‐dioxa‐8‐azaspiro[4.5]dec‐8‐yl)ethoxy] phthalocyaninato cobalt(II) (2) and tetrakis‐(3,3‐diphenylpropoxy)phthalocyaninato cobalt(II) (6) were prepared by the reaction of the phthalonitrile derivatives 1 and 5 with CoCl₂ by microwave irradiation in 2‐(dimethylamino)ethanol for at 175 °C, 350 W for 7 and 10 min, respectively. These new cobalt(II)phthalocyanine complexes were characterized by spectroscopic methods (IR, UV–visible and mass spectroscopy) as well as elemental analysis. Complexes 2 and 6 are employed as catalyst for the oxidation of cyclohexene using tert‐butyl hydroperoxide (TBHP), m‐chloroperoxybenzoic acid (m‐CPBA), aerobic oxygen and hydrogen peroxide (H₂O₂) as oxidant. It is observed that both complexes can selectively oxidize cyclohexene to give 2‐cyclohexene‐1‐ol as major product, and 2‐cyclohexen‐1‐one and cyclohexene oxide as minor products. TBHP was found to be the best oxidant since minimal destruction of the catalyst, higher selectivity and conversion were observed in the products. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluorous biphasic catalysis: synthesis and characterization of copper(I) and copper(II) fluoroponytailed 1,4,7-Rf-TACN and 2,2'-Rf-bipyridine complexes--their catalytic activity in the oxidation of hydrocarbons,olefins, and alcohols,including mechanistic implications

In this contribution on fluorous biphasic catalysis (FBC), we present the synthesis and characterization of new copper complexes, and define their role, as precatalysts, in the FBC oxidation of hydrocarbons, olefins, and alcohols. Thus the previously reported, but poorly characterized, fluoroponytailed ligand, 2,2'-R(f)-bipyridine (R(f)=-(CH(2))(3)C(8)F(17)) 2, as well as the new Cu(II) fluoroponytailed carboxylate synthon complex [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)] 3, will be addressed. Moreover, the reaction of previously described ligands, 1,4,7-R(f)-TACN 1, or 2,2'-R(f)-bipyridine 2 with 3 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-tacn)] 4 and [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-bpy)] 5, respectively. The reaction of 1 with [Cu(CH(3)CN)(4)]PF(6) or [CuCl] provided new Cu(I) complexes, which could be isolated and fully characterized as [Cu(R(f)-tacn)X']X, in which X=PF(6) (6) or X'=Cl (7) (soluble in perfluoroheptane). The Cu(II) and Cu(I) complexes, 4-7, were characterized by elemental analysis, mass spectrometry, and IR, diffuse reflectance UV/Vis, and EPR spectroscopies; complex 7 was also characterized by (1)H and (19)F[(1)H] NMR spectroscopy. Complexes 4 and 5, as well as 6 and 7 generated in situ, were evaluated as precatalysts for hydrocarbon and olefin functionalization. The oxidation reactions of these substrates in the presence of the necessary oxidants, tert-butyl hydroperoxide (TBHP) and oxygen gas, proceeded under FBC conditions for 5, 7, and Cu(I) salts with 2. However, the complexes with ligand 2 could not be recycled, owing to significant ligand dissociation. The Cu(II) complex 4, with the ligand 1, provide the oxidation of 4-nitrobenzyl alcohol to 4-nitrobenzaldehyde under single-phase FBC conditions at 90 degrees C with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxy) and O(2); the precatalyst 4, can be utilized for an additional four catalytic cycles without loss of activity. Plausible mechanisms concerning these FBC oxidation reactions will be discussed.     

Synthesis,structural characterization and catalytic activity of benzimidazole‐functionalized Pd(II) N‐heterocyclic carbene complexes

Two Pd(II)–NHC complexes bearing benzimidazole and pyridine groups have been successfully prepared and fully characterized by NMR and X‐ray diffraction analysis. The structure of palladium complexes are a typical square‐planar with palladium surrounded by two pairs of trans‐arranged benzimidazole and carbene ligands. The Pd–NHC complexes have been proved to be a highly efficient catalyst for the Mizoroki–Heck coupling reaction of aryl halides with various substituted acrylates under mild conditions in excellent yields. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,characterization and catalytic properties of novel palladium(II) complexes containing aromatic sulfonamides: effective catalysts for the oxidation of benzyl alcohol

In this article, N‐(2‐aminophenyl)arylsulfonamides (1–5) were successfully synthesized by the reaction of o‐phenylenediamine and various benzenesulfonyl chlorides. The Schiff base derivatives (1a–f; 4e) of those compounds were obtained using different aldehydes. Then, a series of neutral‐four coordinate Pd(II) complexes (6–10) were prepared from the reaction of Pd(OAc)₂ and 1–5. On the other hand, when we tried to synthesize Pd(II) complexes containing Schiff base/sulfonamide ligands, two different situations were observed. Generally, when an electron‐donating group was attached to the imine fragment (1a–d) except for 1f, the Schiff base hydrolyzed and 6 was isolated. When an electron‐withdrawing group was attached to the imine fragment (1e, 4e), neutral four‐coordinate Pd(II) complexes (11–13) bearing Schiff base/sulfonamide ligands were isolated. The synthesized compounds were characterized by FT‐IR, elemental analysis and NMR spectroscopy. The complexes were used as a catalyst in the oxidation reaction of benzyl alcohol to benzaldehyde in the presence of H₅IO₆ in acetonitrile. All complexes showed satisfactory catalytic activity. The highest catalytic activity was obtained with 9. Copyright © 2012 John Wiley & Sons, Ltd.     

Perfluoroalkylated-pyridine catalyzed Aldol condensations of aldehydes and ketones in a fluorous biphasic system without fluorous solvent

Aldol condensation of different ketones with various aromatic aldehydes proceeds efficiently in the presence of catalytic amount of perfluoroalkylated-pyridine in a fluorous biphasic system without fluorous solvent, which has prompted various concerns involving cost, solvent leaching, and environmental persistence. The catalyst can be recovered by simple cooling and precipitation and used again.     

A novel ytterbium/perfluoroalkylated-pyridine catalyst for Baylis-Hillman reaction in a fluorous biphasic system

Ytterbium perfluorooctanesulfonate [Yb(OPf)₃] catalyses the highly efficient Baylis-Hillman reaction in the presence of a catalytic amount of a novel perfluoroalkylated-pyridine as a ligand in a fluorous biphasic system (FBS) composed of toluene and perfluorodecalin. The new process can be carried out successfully without the use of a stoichiometric amount of Lewis base. The fluorous phase containing the active catalytic species is easily separated and can be reused several times without significant loss of catalytic activity.     

Dinuclear Zn(II) and tetranuclear Co(II) complexes of a tetradentate N2O2 Schiff base ligand: Synthesis,crystal structure,characterization, DFT studies,cytotoxicity evaluation,and catalytic activity toward benzyl alcohol oxidation

Two novel dinuclear Zn(II) and tetranuclear Co(II) complexes of a tetradentate N₂O₂ Schiff base ligand (H₂ L = N,N′-bis-(4-hydroxysalicylidene)-1,3-diaminopropane) were prepared. The structures of the H₂ L ligand, [4(Zn₂ L (μ-O₂CCH₃)(O₂CCH₃)(H₂O))]⋅4CH₃OH⋅3H₂O (complex 1 ) and [Co₄ L ₂(μ-O₂CCH₃)₂(O₂CCH₃)₂]⋅2H₂O (complex 2 ) were unambiguously characterized by elemental analysis, mass spectrometry, Fourier-transform infrared spectroscopy (FT-IR), ¹H nuclear magnetic resonance (NMR), and UV–Vis spectroscopy. Single crystal X-ray diffraction studies revealed that two Zn(II) nuclei of 1 were connected through μ-phenolato and μ-acetato bridges and had distorted square pyramidal and distorted octahedral coordination geometries. Four Co(II) nuclei of 2 , on the contrary, showed a Co₄O₄ cubane-like configuration in which Co(II) cations and O atoms were located at alternating corners of a distorted cube. Density functional theory studies at the B3LYP/6–31 G(d) level were carried out to gain an insight into the thermodynamic stability of the complexes. in vitro cytotoxicity of the ligand and the complexes were evaluated using the MTT assay against breast cancer MCF7 cells, melanoma cancer A375 cells, and prostate cancer PC3 cells as representative human cancer cell lines. Complex 1 showed a remarkable activity against A375 and PC3 cancer cell lines. In addition, 1 and 2 were used as precursors to produce zinc and cobalt oxide nanoparticles via pyrolysis technique. The resulting ZnO and Co₃O₄ nanoparticles were characterized using FT-IR spectroscopy, UV–Vis diffuse reflectance spectroscopy, powder X-ray diffraction, and field emission scanning electron microscopy. Then, these nanoparticles were used as heterogeneous catalysts in the oxidation of benzyl alcohol with hydrogen peroxide at room temperature. Both catalysts showed good recyclability with a negligible decrease in their efficiency during four catalytic cycles. The results of theoretical calculations showed that the most stable product was benzaldehyde, which is in good agreement with the obtained experimental results.     

Copper(II) complexes of two TEMPO-functionalized polypyridyl ligands: structure and catalytic activity in alcohol oxidation

The reaction of copper(II) salts with Bpy-TEMPO and Tpy-TEMPO (Bpy-TEMPO = [2,2′]Bipyridinyl-5,5′-dicarboxylic acid bis-[(2,2,6,6-tetramethyl-1-oxy-piperidin-4-yl)-amide]; Tpy-TEMPO = 2,2,6,6-tetramethyl-4-(2,2′:6′,2″-terpyridin-4′-yloxy)piperidin-1-oxyl) gave dinuclear Bpy-TEMPO-Cu₂ (1) and mononuclear Tpy-TEMPO-Cu (2), respectively. The Cu(II) complexes were characterized by single crystal X-ray analysis. In 1, Cu(II) has a distorted square pyramidal coordination geometry, with a bridging chloride as the axial ligand. The Cu(II) core in 2 also exhibited a distorted square pyramidal coordination geometry, with one chloride as an axial ligand. Weak interactions such as π-interactions and hydrogen bonds are observed in both complexes. When applied as catalysts for the oxidation of benzyl alcohol to benzaldehyde in air, 1 exhibited higher activity than 2 for reactions in o-xylene at 60°C with DBU as a base. High yield (67%) of benzaldehyde was observed when using 1 as a catalyst in a solution of o-xylene with DBU at 60°C.     

Oxidation of benzyl alcohol by novel peripherally and non-peripherally modular C2-symmetric diol substituted cobalt (II) phthalocyanines

In this study, a modular ligand structure was designed by altering the binding position of the phenyl group at backbone of hydrobenzoin. A series of regio isomeric substituted phthalonitriles derived from this modular C₂-symmetric ligand was synthesized and characterized. Then, eight cobalt (II) phthalocyanines (CoPc) were obtained from the reaction of phthalonitrile derivatives with cobalt (II) chloride. The catalytic activities of synthesized cobalt (II) phthalocyanines were tested for benzyl alcohol oxidation in acetonitrile using tert-butylhydroperoxide as the oxygen source and in the presence of N-bromosuccinimide as an additive at 80 °C for 5 hr of the reaction. In this sense, the effect of substrate to catalyst ratio and oxidant to catalyst ratio have been studied in detail for getting the highest benzaldehyde selectivity (up to 83%). The effect of structural design of substituents at peripheral or non-peripheral positions of phthalocyanine skeleton on the catalytic activity performance of cobalt (II) phthalocyanines in benzyl alcohol oxidation was also clarified. All newly synthesized compounds are characterized by FT-IR, ¹H NMR, IR, UV–Vis and MALDI-TOF MS spectral data.     

Ferrocene based chiral binuclear η6‐benzene‐Ru(II)‐phosphinite complexes: Synthesis,characterization and catalytic activity in asymmetric reduction of ketones

In the present study, a series of chiral C₂‐symmetric ferrocenyl based binuclear η⁶‐benzene‐Ru(II) complexes bearing diphenylphosphinite and diisopropylphosphinite moieties have been synthesised. The new binuclear η⁶‐benzene‐Ru(II)‐phosphinite complexes were characterised based on nuclear magnetic resonance (¹H, ¹³C, ³¹P–NMR), FT‐IR spectroscopy and elemental analysis. Then, these complexes have been screened as catalytic precursors in the transfer hydrogenation of acetophenone with 2‐propanol as both the hydrogen source and solvent in the presence of KOH. The corresponding optically active secondary alcohols were obtained in excellent conversion rates between 96 and 99% and moderate to good enantioselectivities (up to 78% ee). The complex 5 was the most efficient catalyst among the four new complexes investigated herein.     

Synthesis,characterization, molecular docking,biological activity and density functional theory studies of novel 1,4‐naphthoquinone derivatives and Pd(II), Ni(II) and Co(II) complexes

Two novel heterocyclic ligands, 2‐[(5‐fluoro‐1,3‐benzothiazol‐2‐yl)amino]naphthalene‐1,4‐dione (HL¹) and 2‐[(5‐methyl‐1,3‐benzothiazol‐2‐yl)amino]naphthalene‐1,4‐dione (HL²), and their Pd(II), Ni(II) and Co(II) complexes were prepared and characterized using ¹H NMR, ¹³C NMR, infrared and UV–visible spectroscopic techniques, elemental analysis, magnetic susceptibility, thermogravimetry and molar conductance measurements. The infrared spectral data showed that the chelation behaviours of the ligands towards the transition metal ions were through one of the carbonyl oxygen and deprotonated nitrogen atom of the secondary amine group. Molar conductance results confirmed that the complexes are non‐electrolytes in dimethylsulfoxide. The geometries of the complexes were deduced from magnetic susceptibility and UV–visible spectroscopic results. Second‐order perturbation analysis using density functional theory calculation revealed a stronger intermolecular charge transfer between ligand and metal ion in [NiL¹(H₂O)₂(CH₃COO‐)] and CoL¹ compared to the other complexes. The in vitro antibacterial activity of the compounds against some clinically isolated bacteria strains showed varied activities. [NiL¹(H₂O)₂(CH₃COO‐)] exhibited the best antibacterial results with a minimum inhibitory concentration of 50 μg mL^?1. The molecular interactions of the compounds with various drug targets of some bacterial organisms were established in a bid to predict the possible mode of antibacterial action of the compounds. The ferrous ion chelating ability of the ligands indicated that HL¹ is a better Fe²⁺ ion chelator, with an IC₅₀ of 29.79 μg mL^?1, compared to HL² which had an IC₅₀ of 98.26 μg mL^?1.     

Anthracene Substituted Co (II) and Cu (II) phthalocyanines; Preparations,Investigation of Catalytical and Electrochemical Behaviors

An approach to investigation of catalytical behaviors of Co (II) and Cu (II) phthalocyanines is reported that is based on changing any parameter to effect these behaviors. Towards this end, new anthracene substituted Co (II) and Cu (II) phthalocyanines were prepared and characterized spectroscopic methods. New cobalt (II) and copper (II) phthalocyanines were used as catalyst for oxidation of different phenolic compounds (such as 2,3‐dichlorophenol, 4‐methoxyphenol, 4‐nitrophenol, 2,3,6‐trimethylphenol) with different oxidants. Then, electrochemical characterization of cobalt (II) and copper (II) phthallocyanines were determined by using cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. Although copper (II) phthalocyanine showed similar Pc based electron transfer processes, cobalt (II) phthalocyanine showed metal and ligand based reduction reactions as expected.     

Preparation,characterization and catalytic oxidation properties of tris[2‐(2‐pyridyl)benzimidazole]iron(II) complexes

Complexes [Fe(Hpbi)₃](ClO₄)₂ (1) and [Fe(Hpbi)₃](SbF₆)₂ (2) (Hpbi = 2‐(2‐pyridyl)benzimidazole) were prepared by a modified method and characterized by IR, ¹H and ¹³C NMR, mass spectrometry, electron paramagnetic resonance spectra and elemental analysis. The catalytic activities of 1 and 2 were evaluated for the oxidation of cyclohexene, cyclohexane, ethylbenzene and adamantane with tert‐butylhydroperoxide or H₂O₂ as oxidant, and the results were compared with the properties of their analogue [Fe(bpy)₃](SbF₆)₂ (3). Complexes 1 and 2 both afforded the ketonization product for the oxidation of ethylbenzene and the hydroxylation product for adamantane. Copyright © 2004 John Wiley & Sons, Ltd.     

Tin(IV) bis(perfluoroalkanesulfonyl)amide complex as a highly selective Lewis acid catalyst for Baeyer-Villiger oxidation using hydrogen peroxide in a fluorous recyclable phase

Sn[N(SO₂C₈F₁₇)₂]₄ catalyst was shown to give an excellent yield and selectivity in a fluorous biphasic catalytic system for Baeyer-Villiger oxidation of cyclic ketones by 35% aqueous hydrogen peroxide, a green, safe and cheap oxidant. Furthermore, the catalyst was completely recovered and reused in the fluorous immobilized phase without loss of activity.     

Copper(II) and Sodium(I) Complexes based on 3,7‐Diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide: Synthesis,Characterization, and Catalytic Activity

The reaction of 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane (DAPTA) with metal salts of Cu^II or Na^I/Ni^II under mild conditions led to the oxidized phosphane derivative 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide (DAPTA=O) and to the first examples of metal complexes based on the DAPTA=O ligand, that is, [Cu^II(μ‐CH₃COO)₂(κO‐DAPTA=O)]₂ ( 1 ) and [Na(1κOO′;2κO‐DAPTA=O)(MeOH)]₂(BPh₄)₂ ( 2 ). The catalytic activity of 1 was tested in the Henry reaction and for the aerobic 2,2,6,6‐tetramethylpiperidin‐1‐oxyl (TEMPO)‐mediated oxidation of benzyl alcohol. Compound 1 was also evaluated as a model system for the catechol oxidase enzyme by using 3,5‐di‐tert‐butylcatechol as the substrate. The kinetic data fitted the Michaelis–Menten equation and enabled the obtainment of a rate constant for the catalytic reaction; this rate constant is among the highest obtained for this substrate with the use of dinuclear Cu^II complexes. DFT calculations discarded a bridging mode binding type of the substrate and suggested a mixed‐valence Cu^II/Cu^I complex intermediate, in which the spin electron density is mostly concentrated at one of the Cu atoms and at the organic ligand.     

Catalytic activity of nickel(II), copper(II) and oxovanadium(II)‐dihydroindolone complexes towards homogeneous oxidation reactions

Three novel paramagnetic metal complexes (MH₂ID) of Ni²⁺, Cu²⁺ and VO²⁺ ions with 3‐hydroxy‐3,3’‐biindoline‐2,2’‐dione (dihydroindolone, H₄ID) were synthesized and characterized by different spectroscopic methods. The ligand (H₄ID) was synthesized via homocoupling reaction of isatin in presence of phenylalanine in methanol. Complexation of low valent Ni²⁺, Cu²⁺ ions and high valent VO²⁺ ions with H₄ID carried out in 1: 2 molar ratios. A comparison in the catalytic potential of paramagnetic complexes of low and high valent metal ion was explored in the oxidation processes of cis‐cyclooctene, benzyl alcohol and thiophene by an aqueous H₂O₂, as a green terminal oxidant, in the presence and absence of acetonitrile, as an organic solvent, at 85 °C. NiH₂ID, CuH₂ID and VOH₂ID show good catalytic activity, i.e. good chemo‐ and regioselectivity. VOH₂ID has the highest catalytic potential compared to both Ni²⁺‐ and Cu²⁺‐species in the same homogenous aerobic atmosphere. Catalytic oxidation of other alkenes and alcohols was also studied using NiH₂ID, CuH₂ID or VOH₂ID as a pre‐catalyst by an aqueous H₂O₂. A mechanistic pathway for those oxidation processes was proposed.     

Synthesis of 2‐Alkynoates by Palladium(II)‐Catalyzed Oxidative Carbonylation of Terminal Alkynes and Alcohols

A homogeneous Pd^II catalyst, utilizing a simple and inexpensive amine ligand (TMEDA), allows 2‐alkynoates to be prepared in high yields by an oxidative carbonylation of terminal alkynes and alcohols. The catalyst system overcomes many of the limitations of previous palladium carbonylation catalysts. It has an increased substrate scope, avoids large excesses of alcohol substrate and uses a desirable solvent. The catalyst employs oxygen as the terminal oxidant and can be operated under safer gas mixtures.     

Synthesis,X‐ray structure,characterization and catalytic activity of a polymeric manganese(II) complex with iminodiacetate

A polymeric manganese(II) complex with the general formula [Mn(O₂CCH₂NH₂CH₂CO₂)₂(H₂O)₂]_n from reaction of iminodiacetatic acid and manganese(II) perchlorate under nitrogen in water, was synthesized and characterized. The structure of the complex was determined using single‐crystal X‐ray diffraction, elemental analysis, IR and UV‐vis spectra. This complex exhibited excellent catalytic activity and selectivity for oxidation of various alcohols and sulfides to the corresponding aldehydes/ketone and sulfoxides using urea hydrogen peroxide and oxone (2KHSO₅·KHSO₄·K₂SO₄), respectively, as oxidants under air at room temperature. The easy preparation, mild reaction conditions, high yields of the products, short reaction time, no over‐oxidation products, high selectivity and inexpensive system make this catalytic system a useful method for oxidizing various alcohols and sulfides. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,characterization and catalytic activity of Pd(II) complexes with N‐allyl functionalized imidazol‐2‐ylidenes in Suzuki–Miyaura reaction

A series of Pd–N‐heterocyclic carbene (Pd–NHC) complexes were synthesized and characterized by elemental analysis and spectroscopic methods. In addition, the molecular structures of 3c and 4c were determined by X‐ray diffraction studies. Finally, the performance of complexes 3 and 5 were studied on Suzuki–Miyaura reactions of phenylboronic acid with aryl bromides. Copyright © 2014 John Wiley & Sons, Ltd.