Reaction of N‐Heterocyclic Silylenes with Thioketone: Formation of Silicon–Sulfur Three (Si‐C‐S)‐ and Five (Si‐C‐C‐C‐S)‐Membered Ring Systems

Three‐ and five‐membered rings that bear the (Si‐C‐S ) and (Si‐C‐C‐C‐S ) unit have been synthesized by the reactions of L SiCl ( 1 ; L =PhC(NtBu)₂) and L′ Si ( 2 ; L′ =CH{(C?CH₂)(CMe)(2,6‐iPr₂C₆H₃N)₂}) with the thioketone 4,4′‐bis(dimethylamino)thiobenzophenone. Treatment of 4,4′‐bis(dimethylamino)thiobenzophenone with L SiCl at room temperature furnished the [1+2]‐cycloaddition product silathiacyclopropane 3 . However, reaction of 4,4′‐bis(dimethylamino)thiobenzophenone with L′ Si at low temperature afforded a [1+4]‐cycloaddition to yield the five‐membered ring product 4 . Compounds 3 and 4 were characterized by NMR spectroscopy, EIMS, and elemental analysis. The molecular structures of 3 and 4 were unambiguously established by single‐crystal X‐ray structural analysis. The room‐temperature reaction of 4,4′‐bis(dimethylamino)thiobenzophenone with L′ Si resulted in products 4 and 5 , in which 4 is the dearomatized product and 5 is formed under the 1,3‐migration of a hydrogen atom from the aromatic phenyl ring to the carbon atom of the C? S unit. Furthermore, the optimized structures of probable products were investigated by using DFT calculations.     

Alkyl‐Tethered Bis‐Phosphoryl Compounds with two 1,3,2‐Benzodiazaphosphorinone Units; Oxidation,Complexation, and X‐Ray Structure Analysis of Selected Compounds

The reaction of the bis‐chlorophosphines 1 a – 1 d with bis(2‐chloroethyl)amine hydrochloride in the presence of triethylamine and with various trimethylsilylamines led to a new class of bis‐phosphorus ligands 2 a – 2 c and 3 a – 3 g . ³¹P‐NMR studies suggested that the bis‐phosphorus ligands undergo rotation reactions about the alkyl bridge in polar solvents. Compounds 2 a – 2 c showed initially only one sharp singlet each in their ³¹P‐NMR spectra. After a few days at room temperature, two signals were observed. Similar results were observed for 3 a – 3 g . In the solid state, the two phosphorus atoms in 2 c are not equivalent, as was confirmed by the observation of two signals in the solid state ³¹P‐NMR spectrum. Oxidation reactions of 2 a – 2 c by the hydrogen peroxide‐urea 1 : 1 adduct (NH₂)₂C(:O) · H₂O₂ led to the formation of the corresponding phosphoryl compounds 4 a – 4 c . Reaction of 2 a and 3 a with Pt[COD]Cl₂ (COD = 1.5‐Cyclooctadiene) furnished the complexes 5 and 6 . The NMR spectra suggested that the two chlorine atoms are in cis position. X‐ray structure analyses were conducted for 2 a , which exhibits twofold symmetry; 2 c , which is linked into dimers by hydrogen bonds C–H…O; and 6 , confirming the cis configuration.     

Bis‐aroylhydrazone based on 2,2′‐bis substituted diphenylamine for synthesis of new binuclear organotin (IV) complexes: Spectroscopic characterization,crystal structures,in vitro DNA‐binding,plasmid DNA cleavage,PCR and cytotoxicity against MCF7 cell line

New dinuclear organotin (IV) complexes, Me₄Sn₂L, Ph₄Sn₂L and Bu₄Sn₂L, have been synthesized from reaction of R₂SnCl₂ (R = Me, Ph and Bu) with a 2,2′‐bis‐substituted diphenylamine arοylidene hydrazone, H₄L. The synthesized compounds were investigated by elemental analysis and infrared, ¹H‐NMR and ¹¹⁹Sn‐NMR spectroscopy. The structures of H₄L, Me₄Sn₂L and Bu₄Sn₂L were also confirmed by X‐ray crystallography. H₄L molecules adopt (E)‐configuration and keto‐tautomeric form in the solid state. In all complexes, the bis‐hydrazone acts as a tetra‐anionic ligand with two contiguous ONO tridentate domains that coordinate the two R₂Sn moieties in the enolate form. The coordination environments of both tin centers are five‐coordinate. DNA‐binding studies were performed by UV–Vis spectroscopy, and the results indicate that the synthesized compounds significantly interact with calf thymus‐DNA in the intercalative mode. The results of polymerase chain reaction assay show that all the compounds affect on amplification of DNA, and complexes are more effective than ligands. The in vitro cytotoxicity against the human breast cancer line (MCF7) was determined using the MTT assay, and H₄L and the dibutytin complex showed higher activity.     

Ligand‐forced dimerization of copper(I)–olefin complexes bearing a 1,3,4‐thiadiazole core

As an important class of heterocyclic compounds, 1,3,4‐thiadiazoles have a broad range of potential applications in medicine, agriculture and materials chemistry, and were found to be excellent precursors for the crystal engineering of organometallic materials. The coordinating behaviour of allyl derivatives of 1,3,4‐thiadiazoles with respect to transition metal ions has been little studied. Five new crystalline copper(I) π‐complexes have been obtained by means of an alternating current electrochemical technique and have been characterized by single‐crystal X‐ray diffraction and IR spectroscopy. The compounds are bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₆H₉N₃S)₂], (1), bis[μ‐5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine]bis[(tetrafluoroborato)copper(I)], [Cu₂(BF₄)₂(C₆H₉N₃S)₂], (2), μ‐aqua‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}bis[nitratocopper(I)], [Cu₂(NO₃)₂(C₅H₇N₃S₂)₂(H₂O)], (3), μ‐aqua‐(hexafluorosilicato)bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I)–acetonitrile–water (2/1/4), [Cu₂(SiF₆)(C₅H₇N₃S₂)₂(H₂O)]·0.5CH₃CN·2H₂O, (4), and μ‐benzenesulfonato‐bis{μ‐5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine}dicopper(I) benzenesulfonate–methanol–water (1/1/1), [Cu₂(C₆H₅O₃S)(C₅H₇N₃S₂)₂](C₆H₅O₃S)·CH₃OH·H₂O, (5). The structure of the ligand 5‐methyl‐N‐(prop‐2‐en‐1‐yl)‐1,3,4‐thiadiazol‐2‐amine (Mepeta ), C₆H₉N₃S, was also structurally characterized. Both Mepeta and 5‐[(prop‐2‐en‐1‐yl)sulfanyl]‐1,3,4‐thiadiazol‐2‐amine (Pesta ) (denoted L ) reveal a strong tendency to form dimeric {Cu₂L ₂}²⁺ fragments, being attached to the metal atom in a chelating–bridging mode via two thiadiazole N atoms and an allylic C=C bond. Flexibility of the {Cu₂(Pesta )₂}²⁺ unit allows the Cu^I atom site to be split into two positions with different metal‐coordination environments, thus enabling the competitive participation of different molecules in bonding to the metal centre. The Pesta ligand in (4) allows the Cu^I atom to vary between water O‐atom and hexafluorosilicate F‐atom coordination, resulting in the rare case of a direct Cu^I…FSiF₅²⁻ interaction. Extensive three‐dimensional hydrogen‐bonding patterns are formed in the reported crystal structures. Complex (5) should be considered as the first known example of a Cu^I(C₆H₅SO₃) coordination compound. To determine the hydrogen‐bond interactions in the structures of (1) and (2), a Hirshfeld surface analysis has been performed.     

A new copper(II) supramolecular coordination polymer and a dinuclear compound with multifunctional 2‐amino‐5‐sulfobenzoic acid and flexible N‐donor ligands: synthesis,structure and characterization

Multifunctional 2‐amino‐5‐sulfobenzoic acid (H₂afsb) can exhibit a variety of roles during the construction of supramolecular coordination polymers. The pendant carboxylic acid, sulfonic acid and amino groups could not only play a role in directing bonding but could also have the potential to act as hydrogen‐bond donors and acceptors, resulting in extended high‐dimensional supramolecular networks. Two new Cu^II coordination compounds, namely catena‐poly[[[diaquacopper(II)]‐μ‐1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane‐κ²N⁴:N^4′] bis(3‐amino‐4‐carboxybenzenesulfonate) dihydrate], {[Cu(C₁₀H₁₆N₆)₂(H₂O)₂](C₇H₆NO₅S)₂·2H₂O}_n or {[Cu(bth)₂(H₂O)₂](Hafsb)₂·2H₂O}_n, (1), and bis(μ‐2‐amino‐5‐sulfonatobenzoato‐κ²O¹:O^1′)bis{μ‐1,2‐bis[(1H‐imidazol‐1‐yl)methyl]benzene‐κ²N³:N^3′}bis[aquacopper(II)] trihydrate, [Cu₂(C₇H₅NO₅S)₂(C₁₄H₁₄N₄)₂(H₂O)₂]·3H₂O or [Cu₂(afsb)₂(obix)₂(H₂O)₂]·3H₂O, (2), have been obtained through the assembly between H₂afsb and the Cu^II ion in the presence of the flexible N‐donor ligands 1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane (bth) and 1,2‐bis[(1H‐1,2,4‐triazol‐1‐yl)methyl]benzene (obix), respectively. Compound (1) consists of a cationic coordination polymeric chain and 3‐amino‐4‐carboxybenzenesulfonate (Hafsb⁻) anions. Compound (2) exhibits an asymmetric dinuclear structure. There are hydrogen‐bonded networks within the lattices of (1) and (2). Interestingly, both (1) and (2) exhibit reversible dehydration–rehydration behaviour.     

Synthesis of New Tetrazole Derivatives of Spiro‐ and Bis‐barbiturates

This work described the synthesis of the first and unprecedented examples of 5‐aryl‐1H‐tetrazoles including spiro‐ and bis‐(thio)barbiturates, generated from the reaction between 4‐(1H‐tetrazol‐5‐yl)benzaldehyde with (thio)barbituric acids and cyanogen bromide (BrCN) in the presence of triethylamine, providing good overall yields. Tetrazoles based on bis‐(thio) barbiturates were also obtained in the absence of BrCN under the same conditions. The structures were characterized by IR, ¹H NMR, ¹³C NMR, X‐ray crystallography and mass analysis techniques. The reaction mechanism was proposed. The hydrogen bond strength (E_HB) versus d (O1?????O7 (w)) distance (kcal.mol^?1) and corresponding pKa value for the proton of H_3A (in water molecule) in 4b.H₂O were estimated to be 13.8 kcal.mol^?1 and 8.2, respectively.     

One Dimensional Coordination Polymer Constructed by1,2—Bis（4—pyridinecarboxamido）ethane and Copper（Ⅱ）

The ligand [1,2‐bis(4‐pyridinecarboxamido)ethane] (L) and the coordination polymer |[Cu(L)₂(H₂O)]‐(NO₃)₂·6H₂O|·(1) haw been synthesized and characterized by ER and ¹H NMR spectra. Their molecular structures and the packing of 1 have been determined by single‐crystal X‐ray diffraction analysis. The Cu(n) in 1 is bridged by two ligands forming an infinite one‐dimensional chain like structure and L in 1 adopts a different conformation from its free state. 1 belongs to monoclinic, space group P2₁/n, a = 1.2896(3) nm, b = 1.2552(8) nm, c = 2.2903(19) nm, β = 93.04(5)°, Z = 4, V = 3.702(4) nm³. The TG and DTG experiments showed that the uncoordinated H₂O can be removed at low temperature by heating, and it does not decompose until 250 °C.     

Gold(I) ‐Nickel(II)‐4,4′‐bpy‐Phosphine Complexes: Synthesis and Multinuclear NMR Study

Silver triflate [AgOTf] assisted de‐bromination gives [Ni(dppm/dppe/(PPh₃)₂) (OTf)₂], which on reaction with 4,4′‐bpy and gold(I) phosphines in dichloromethane medium by the self assemble technique leads to [{(L)Ni}{(4,4‐bpy)Au(PPh₃)}₂](OTf)₄, ( 1,2,3 ) [{(L)Ni(4,4‐bpy)}₄](OTf)₈, ( 4,5,6 ) [L = dppm/dppe/(PPh₃)₂ = diphenyl phosphino‐methane, ‐ethane, bis‐triphenylphosphine, OSO₂CF₃ is the triflate anion]. The maximum molecular peak of the corresponding molecule is observed in the ESI mass spectrum. Ir spectra of the complexes show ‐C=C‐, ‐C=N‐, as well as phosphine stretching. The ¹H NMR spectra as well as ³¹P (¹H)NMR suggest solution stereochemistry, proton movement, and phosphorus proton interaction. Considering all the moieties, there are a lot of carbon atoms in the molecule reflected by the ¹³C NMR spectrum. In the ¹H‐¹H COSY spectrum of the present complexes and contour peaks in the ¹H^?13C HMQC spectrum, we assign the solution structure and stereoretentive transformation in each step.     

Self‐assembly properties of Salamo‐type trinuclear Cu(II) and Co(II) complexes based on the regulation of H+/OHˉ

A novel naphthalenediol‐based bis(salamo)‐type tetraoxime compound (H₄L) was designed and synthesized. Two new supramolecular complexes, [Cu₃(L)(μ‐OAc)₂] and [Co₃(L)(μ‐OAc)₂(MeOH)₂]·4CHCl₃ were synthesized by the reaction of H₄L with Cu(II) acetate dihydrate and Co(II) acetate dihydrate, respectively, and were characterized by elemental analyses and X‐ray crystallography. In the Cu(II) complex, Cu1 and Cu2 atoms located in the N₂O₂ sites, and are both penta‐coordinated, and Cu3 atom is also penta‐coordinated by five oxygen atoms. All the three Cu(II) atoms have geometries of slightly distorted tetragonal pyramid. In the Co(II) complex, Co1 and Co3 atoms located in the N₂O₂ sites, and are both penta‐coordinated with geometries of slightly distorted triangular bipyramid and distorted tetragonal pyramid, respectively, while Co2 atom is hexa‐coordinated by six oxygen atoms with a geometry of slightly distorted octahedron. These self‐assembling complexes form different dimensional supramolecular structures through inter‐ and intra‐molecular hydrogen bonds. The coordination bond cleavages of the two complexes have occurred upon the addition of the H⁺, and have reformed again via the neutralization effect of the OH^?. The changes of the two complexes response to the H⁺/OH^? have observed in the UV–Vis and ¹H NMR spectra.     

Chiral one‐dimensional hydrogen‐bonded architectures constructed from single‐enantiomer phosphoric triamides

The two single‐enantiomer phosphoric triamides N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis[(S)‐(−)‐α‐methylbenzyl]phosphoric triamide, [2,6‐F₂‐C₆H₃C(O)NH][(S)‐(−)‐(C₆H₅)CH(CH₃)NH]₂P(O), denoted L‐1 , and N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis[(R)‐(+)‐α‐methylbenzyl]phosphoric triamide, [2,6‐F₂‐C₆H₃C(O)NH][(R)‐(+)‐(C₆H₅)CH(CH₃)NH]₂P(O), denoted D‐1 , both C₂₃H₂₄F₂N₃O₂P, have been investigated. In their structures, chiral one‐dimensional hydrogen‐bonded architectures are formed along [100], mediated by relatively strong N—H…O(P) and N—H…O(C) hydrogen bonds. Both assemblies include the noncentrosymmetric graph‐set motifs R₂²(10), R₂¹(6) and C₂²(8), and the compounds crystallize in the chiral space group P1. Due to the data collection of L‐1 at 120 K and of D‐1 at 95 K, the unit‐cell dimensions and volume show a slight difference; the contraction in the volume of D‐1 with respect to that in L‐1 is about 0.3%. The asymmetric units of both structures consist of two independent phosphoric triamide molecules, with the main difference being seen in one of the torsion angles in the OPNHCH(CH₃)(C₆H₅) part. The Hirshfeld surface maps of these levo and dextro isomers are very similar; however, they are near mirror images of each other. For both structures, the full fingerprint plot of each symmetry‐independent molecule shows an almost asymmetric shape as a result of its different environment in the crystal packing. It is notable that NMR spectroscopy could distinguish between compounds L‐1 and D‐1 that have different relative stereocentres; however, the differences in chemical shifts between them were found to be about 0.02 to 0.001 ppm under calibrated temperature conditions. In each molecule, the two chiral parts are also different in NMR media, in which chemical shifts and P–H and P–C couplings have been studied.     

Regiodirected Synthesis and Stereochemistry of 2,4,8‐Trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes and α,ω‐Bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes

2,4,8‐Trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes have been obtained by the regioselective and stereoselective cyclocondensation of 1,2‐ethanediamine with aldehydes RCHO (R═Me, Et, Prⁿ, Buⁿ, Pentⁿ) and H₂S at molar ratio 1:3:2 at 0°C. The increase in molar ratio of thiomethylation mixture RCHO–H₂S (6:4) at 40°C resulted in selective formation of bis‐(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)ethanes. Cyclothiomethylation of aliphatic α,ω‐diamines with aldehydes RCHO (R═Me, Et) and H₂S at molar ratio 1:6:4 and at 40°С led to α,ω‐bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes. Stereochemistry of 2,4,8‐trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes have been determined by means of ¹H and ¹³С NMR spectroscopy and further supported by DFT calculations at the B3LYP/6‐31G(d,p) level. The structure of α,ω‐bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes was confirmed by single‐crystal X‐ray diffraction study.     

Metal‐Ion‐Binding Analogs of Ribonucleosides: Preparation and Formation of Ternary Pd2+ and Hg2+ Complexes with Natural Pyrimidine Nucleosides

Four metal‐ion‐binding nucleosides, viz. 2,6‐bis(1‐methylhydrazinyl)‐9‐(β‐D ‐ribofuranosyl)‐9H‐purine ( 2a ) and its N‐acetylated derivative, 2b , 2,4‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)‐5‐(β‐D ‐ribofuranosyl)pyrimidine ( 3 ), and 2,4‐bis(1‐methylhydrazinyl)‐5‐(β‐D ‐ribofuranosyl)pyrimidine ( 4 ) have been synthesized. The ability of these nucleosides and the previously prepared 2,6‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)‐9‐(β‐D ‐ribofuranosyl)‐9H‐purine to form Pd²⁺‐ and Hg²⁺‐mediated complexes with uridine has been studied by ¹H‐NMR spectroscopy. To obtain additional support for the interpretation of the NMR data, comparative measurements on the ternary‐complex formation between pyridine‐2,6‐dicarboxamide ( 5 ), pyrimidine nucleosides, and K₂PdCl₄ were carried out.     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Synthesis and coordination chemistry of the PPN ligand 2‐[bis(diisopropylphosphanyl)methyl]‐6‐methylpyridine

The synthesis and crystal structure of the multidentate PPN ligand 2‐[bis(diisopropylphosphanyl)methyl]‐6‐methylpyridine (L ), C₁₉H₃₅NP₂, are described. In the isostructural tetrahedral Fe and Co complexes of type LM Cl₂ (M = Fe, Co), namely {2‐[bis(diisopropylphosphanyl)methyl]‐6‐methylpyridine‐κ²P ,N }dichloridoiron(II), [FeCl₂(C₁₉H₃₅NP₂)], and {2‐[bis(diisopropylphosphanyl)methyl]‐6‐methylpyridine‐κ²P ,N }dichloridocobalt(II), [CoCl₂(C₁₉H₃₅NP₂)], the ligand adopts a bidentate P ,N‐coordination, whereas in the case of the octahedral Mn complex {2‐[bis(diisopropylphosphanyl)methyl]‐6‐methylpyridine‐κ²P ,P ′}bromidotricarbonylmanganese(I), [MnBr(C₁₉H₃₅NP₂)(CO)₃], the ligand coordinates via both P atoms to the metal centre.     

Synthesis of 5‐Aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles via Three‐Component Reaction of 1,1‐Bis(methylsulfanyl)‐2‐nitroethene,Aromatic Aldehydes,and Hydrazine

An efficient approach for the preparation of functionalized 5‐aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles 2 is described. This three‐component reaction between benzaldehydes 1 , NH₂NH₂?H₂O, and 1,1‐bis(methylsulfanyl)‐2‐nitroethene proceeds in EtOH under reflux conditions in good‐to‐excellent yields. The structures of 2 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Synthesis,structure and biological activity of diorganotin derivatives with pyridyl functionalized bis(pyrazol‐1‐yl)methanes

Three pyridyl functionalized bis(pyrazol‐1‐yl)methanes, namely 2‐[(4‐pyridyl)methoxyphenyl] bis(pyrazol‐1‐yl)methane (L¹), 2‐[(4‐pyridyl)methoxyphenyl]bis(3,5‐dimethylpyrazol‐1‐yl)methane (L²) and 2‐[(3‐pyridyl)methoxyphenyl]bis(pyrazol‐1‐yl)methane (L³) have been synthesized by the reactions of (2‐hydroxyphenyl)bis(pyrazol‐1‐yl)methanes with chloromethylpyridine. Treatment of these three ligands with R₂SnCl₂ (R = Et, n‐Bu or Ph) yields a series of symmetric 2:1 adducts of (L)₂SnR₂Cl₂ (L = L¹, L² or L³), which have been confirmed by elemental analysis and NMR spectroscopy. The crystal structures of (L²)₂Sn(n‐Bu)₂Cl₂·0.5C₆H₁₄ and (L³)₂SnEt₂Cl₂ determined by X‐ray crystallography show that the functionalized bis(pyrazol‐1‐yl)methane acts as a monodentate ligand through the pyridyl nitrogen atom, and the pyrazolyl nitrogen atoms do not coordinate to the tin atom. The cytotoxic activity of these complexes for Hela cells in vitro was tested. Copyright © 2010 John Wiley & Sons, Ltd.     

Structural diversity,magnetic properties and luminescence of NiII,CoII and ZnII coordination polymers derived from 3,3′‐[(5‐carboxy‐1,3‐phenylene)bis(oxy)]dibenzoic acid and 1,10‐phenanthroline

Three novel coordination polymers (CPs), namely poly[[di‐μ‐aqua‐bis{μ₄‐3,3′‐[(5‐carboxylato‐1,3‐phenylene)bis(oxy)]dibenzoato‐κ⁵O¹:O^1′,O³:O⁵:O^5′}bis(1,10‐phenanthroline‐κ²N,N′)trinickel(II)] dimethylformamide 1.5‐solvate trihydrate], {[Ni₃(C₂₁H₁₁O₈)₂(C₁₂H₈N₂)₂(H₂O)₂]·1.5C₃H₇NO·3H₂O}_n, (I), poly[[di‐μ‐aqua‐bis{μ₄‐3,3′‐[(5‐carboxylato‐1,3‐phenylene)bis(oxy)]dibenzoato‐κ⁵O¹:O^1′,O³:O⁵:O^5′}bis(1,10‐phenanthroline‐κ²N,N′)tricobalt(II)] diethylamine disolvate tetrahydrate], {[Co₃(C₂₁H₁₁O₈)₂(C₁₂H₈N₂)₂(H₂O)₂]·2C₂H₇N·4H₂O}_n, (II), and catena‐poly[[aqua(1,10‐phenanthroline‐κ²N,N′)zinc(II)]‐μ‐5‐(3‐carboxyphenoxy)‐3,3′‐oxydibenzoato‐κ²O¹:O³], [Zn(C₂₁H₁₂O₈)(C₁₂H₈N₂)(H₂O)]_n, (III), have been synthesized by the reaction of different metal ions (Ni²⁺, Co²⁺ and Zn²⁺), 3,3′‐[(5‐carboxy‐1,3‐phenylbis(oxy)]dibenzoic acid (H₃cpboda) and 1,10‐phenanthroline (phen) under solvothermal conditions. All the CPs were characterized by elemental analysis, single‐crystal and powder X‐ray diffraction, FT–IR spectroscopy and thermogravimetric analysis. Complexes (I) and (II) have isomorphous structures, featuring similar linear trinuclear structural units, in which the central Ni^II/Co^II atom is located on an inversion centre with a slightly distorted octahedral [NiO₆]/[CoO₆] geometry. This comprises four carboxylate O‐atom donors from two cpboda^3? ligands and two O‐atom donors from bridging water molecules. The terminal Ni^II/Co^II groups are each connected to the central Ni^II/Co^II cation through two μ_1,3‐carboxylate groups from two cpboda^3? ligands and one water bridge, giving rise to linear trinuclear [M₃(μ₂‐H₂O)₂(RCOO)₄] (M = Ni²⁺/Co²⁺) secondary building units (SBUs) and the SBUs develop two‐dimensional‐networks parallel to the (100) plane via cpboda^3? ligands with new (3²·4)₂(3²·8³·9)₂(3⁴·4².8²·9⁴·10³) topological structures. Zinc complex (III) displays one‐dimensional coordination chains and the five‐coordinated Zn atom forms a distorted square‐pyramidal [ZnO₃N₂] geometry, which is completed by two carboxylate O‐atom donors from two distinct Hcpboda^2? ligands, one O atom from H₂O and two N atoms from a chelating phen ligand. Magnetically, CP (I) shows weak ferromagnetic interactions involving the carboxylate groups, and bridging water molecules between the nickel(II) ions, and CP (II) shows antiferromagnetic interactions between the Co²⁺ ions. The solid‐state luminescence properties of CP (III) were examined at ambient temperature and the luminescence sensing of Cr₂O₇^2?/CrO₄^2? anions in aqueous solution for (III) has also been investigated.     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Synthesis,spectral and antimicrobial studies of diorganotin(IV)3(2′‐hydroxyphenyl)‐5‐(4‐substituted phenyl) pyrazolinates

Diorganotin(IV) dipyrazolinates of the type R₂Sn(C₁₅H₁₂N₂OX)₂ [where C₁₅H₁₂N₂OX = 3(2′‐Hydroxyphenyl)‐5(4‐X‐phenyl)pyrazoline {where X = H ( a ); CH₃ ( b ); OCH₃ ( c ); Cl ( d ) and R = Me, Prⁿ and Ph}] have been synthesized by the reaction of R₂SnCl₂ with sodium salt of pyrazolines in 1:2 molar ratio, in anhydrous benzene. These newly synthesized derivatives have been characterized by elemental analysis (C, H, N, Cl and Sn), molecular weight measurement as well as spectral [IR and multinuclear NMR (¹H, ¹³C and ¹¹⁹Sn)] studies. The bidentate behaviour of the pyrazoline ligands was confirmed by IR, ¹H and ¹³C NMR spectral data. A distorted trans‐octahedral structure around tin(IV) atom for R₂Sn(C₁₅H₁₂N₂OX)₂ has been suggested. The free pyrazoline and diorganotin(IV) dipyrazolinates have also been screened for their antibacterial and antifungal activities. Some diorganotin(IV) dipyrazolinates exhibit higher antibacterial and antifungal effect than free ligand and some of the antibiotics. Copyright © 2006 John Wiley & Sons, Ltd.