Fluidization of cation exchangers with regenerating sulfuric acid solution

Dependences of the bed expansion of cation exchangers (weakly acidic Lewatit CNP 80 and strongly acidic KU-2×8) on the flow velocity, temperature, and concentration of the regenerating sulfuric acid solution were determined. An equation describing the dependence of the bed expansion of cation exchangers on the flow velocity, temperature, and concentration of sulfuric acid, common to the two ion exchangers, was derived, which allows a priori determination of the extent of bed expansion in regeneration of cation exchangers in the fluidization mode.     

Composite Ion Exchangers Based on KU-23 and KM-2P Cation Exchangers and Nickel(III) Hydroxide and Their Use for Purification of Nickel Sulfate Solutions To Remove Cobalt(II) Impurity

A method of preparing composite ion exchangers based on macroporous cation exchangers and nickel(III) hydroxide was developed, and their suitability for deep purification of nickel(II) sulfate solutions to remove small amounts of cobalt(II) was demonstrated.     

Characteristics of Novel Types of Substituted Cerium Phosphates

The disodium, dilithium, dipotassium and distrontium forms of cerium phosphate were prepared from their corresponding mono-forms. The chemical content of these inorganic ion exchangers have been characterized by inductively coupled plasma (ICP) spectroscopy. The ion exchange properties of these cation exchangers, their chemical stability and selectivity for certain ions were investigated. It was found that, by introducing different salts into the reaction mixture used to prepare cerium phosphate, robust cation exchange materials of reproducible composition with a good cation capacity, and suitable for column use, are produced. All the ion exchangers with the exception of CeP (dipotassium) show excellent selectivity towards certain cations, thereby increasing the potential practical applications of these inorganic exchangers.     

New phosphorus-containing sorbents based on wheat straw and glycidyl methacrylate for Hg<Superscript>2+</Superscript> removal

The possibility of preparing new phosphoric acid cation exchangers based on wheat straw and glycidyl methacrylate was explored. The mercury(II) ion sorption properties of the prepared cation exchangers were studied.     

Ion exchange extraction of platinum(IV) and palladium(II) from hydrochloric acid solutions

Sorption concentration of platinum(II, IV) and palladium(II) from freshly prepared and aged two-yearold hydrochloric acid solutions by a series of anion exchangers with different functional groups and of different physical structure of Purolite and CYBBER grades was studied. The high sorption ability of the ion exchangers in relation to the extracted chlorocomplexes of noble metals is shown. It was demonstrated that palladium(II) from all tested ion exchangers can be completely desorbed with thiourea solutions acidified with hydrochloric acid, while complete desorption of platinum is achieved only from Purolite S 985 anion exchanger of the complexforming type and Purolite A 111 weak base anion exchanger.     

Ion-exchange recovery of nickel(II) and cobalt(II) from sulfuric acid solutions

Sorption recovery of nickel(II) and cobalt(II) in their joint presence in sulfuric acid solutions was studied on new samples of domestic ion exchangers of CYBBER brand. It was shown that the ion exchangers under study have a high sorption capacity for ions of both nonferrous metals, depending on the structure of a sorbent and on the acidity of a contacting solution. It was found that, after Co(II) and Ni(II) ions are extracted from weak or strong sulfuric acid solutions, they can be effectively eluted from the ion exchangers under study with a 2 M hydrochloric acid solution to an extent of 85–95% (nickel) and 87–95% (cobalt).     

Synthesis and Physicochemical Study of Polyfunctional Ion Exchangers Based on Dextramine Waste from Levomycetin Production

New polyfunctional anion exchangers are synthesized from dextramine (waste from levomycetin production) by condensation of its glycidyl ethers with certain polyamines. The polycondensation conditions are optimized, and physicochemical properties of the resulting ion exchangers are studied.     

双功能聚合物基质阳离子交换固定相的制备及其在离子色谱中的应用

离子色谱是分离分析阳离子型化合物的重要手段之一。高效阳离子交换固定相的制备研究对离子色谱技术的发展具有重要的意义。该文以丙烯酸和顺丁烯二酸酐为单体,2-巯基乙基磺酸钠为巯基改性剂,提出了聚合物基质微球巯基改性自由基聚合修饰方法,用以制备新型双功能的阳离子交换固定相。该固定相以羧基和磺酸基为功能基,仅用简单的强酸淋洗液便可以实现常规阳离子的基线分离。利用色谱学模型,对金属离子和有机胺的保留行为进行了研究。采用梯度淋洗模式,可在24 min内实现10种阳离子的分离,表明固定相具有优异的色谱性能。“巯基-烯”修饰方法简单、高效。此外,通过调节巯基改性剂的比例能够实现对固定相交换能力的调控。     

Specific features of rhenium desorption from weakly basic anion exchangers Purolite A170 and Purolite A172 with ammonia solutions

Equilibrium, kinetics, and dynamics of rhenium desorption from weakly basic macroporous (Purolite A170) and gel anion (Purolite A172) exchangers with ammonia solutions were studied. The effective diffusion coefficients of rhenium in its desorption from these anion exchangers and the activation energy of rhenium desorption from the gel anion exchanger were estimated.     

Sorption recovery of platinum(II, IV) from chloride and sulfate-chloride solutions

Sorption of platinum(II, IV) from chloride and sulfate-chloride solution on anion exchangers of varied chemical structure (various functional groups and varied basicity) was studied. It was found that sulfate-chloride systems have high efficiency comparable with that of chloride systems in sorption of platinum by AM-2B, Purolite S 985, and Lewatit MP 600 WS anion exchangers.     

The equilibrium sorption of sulfuric acid by weakly basic polyacrylic anion exchangers synthesized on the basis of polyamines

The equilibrium ion-exchange sorption of sulfuric acid by the free base form of weakly basic polyacrylic anion exchangers with the gel (Relite MG1) and porous (Relite MG1/P) structures was studied. It was proved that the bisulfate variety of the anion exchangers did not form. Solutions of resinates were found to be nonideal. Their nonideality was analyzed in terms of the theory of exchange equilibria to suggest a model of the exchange of doubly-charged anions on fixed polyamine exchange centers of Relite MG1 and Relite MG1/P anion exchangers. The type of the ion was found to have no effect on sorption parameters.     

Comparison of silica-based and polymer-based cation exchangers for the ion chromatographic separation of transition metals

Silica gel- and polymer-based exchangers differ not only in the substrate but usually also in the structure of their sulphonic acid exchange group. The performance and chromatographic behaviour of modern macroporous poly(styrene-divinylbenzene) polymers of 5-μm particle size after surface sulphonation were examined. Further, two commercially available silica gel cation exchangers were investigated as references for what is now possible and how the chromatographic performance is influenced by the substrate and the structure of the exchange site. The influence of the capacity of surface-sulphonated exchangers for acid and complexing eluents, which are necessary when transition metals are to be separated, was studied. The interaction of polarizable metal cations with the π-system of the polymer depends on the resin capacity, and a comparable dependence for H⁺ and complexing eluents was found. The distance of the functional group from the core influences the adsorption effects dramatically. Lowering the non-specific interaction increases the chromatographic efficiency rapidly. The performance of silica gel-based exchangers is nearly one order of magnitude better than that of surface-sulphonated exchangers. The selectivity of the exchangers investigated is strongly dependent on the structure of the exchange site and on the resin capacity.     

Performance of anion exchangers based on aniline,epichlorohydrin, and polyamines in sorption of molybdenum(VI) ions

Polyfunctional anion exchangers based on aniline, epichlorohydrin, and some polyamines were synthesized. The composition and structure of the anion exchangers were studied by IR spectroscopy and elemental analysis. Molybdenum sorption was studied by classical polarography, and dependences of the sorption of molybdenum(VI) ions on the solution acidity, concentration of metal ions, and time of contact of the resins with the Na₂MoO₄ solution were determined in batch experiments. These ion exchangers exhibit high performance in sorption of molybdenum ions. The developed sorbents with increased sorption ability can successfully solve problems of removing molybdenum(VI) ions from process effluents in nonferrous metallurgy.     

Preparation and chromatographic performance of polymer-based anion exchangers for ion chromatography: A review

In the last decade the developments in the field of ion chromatography (IC) were aimed at increasing the efficiency, sensitivity and rapidity of analysis, as well as on improving separation selectivity. Since selectivity and efficiency to the large extent depend on the surface chemistry of the stationary phase, the development of novel anion exchangers remains one of the priority tasks in modern IC. The exact chemistry of commercially available resins is not known and not many literature data devoted to the procedures of preparing anion exchangers for IC have become available in the last 10–15 years. However, the knowledge about the surface chemistry of anion exchangers can provide understanding of the trends in selectivity and efficiency changes, as well as help with the choice of the stationary phase type suitable for solving a particular analytical task. The current review is devoted to the methods of preparing anion exchangers based on polystyrene-divinylbenzene (PS-DVB) and ethylvinylbenzene-divinylbenzene (EVB-DVB) for IC of inorganic and small organic anions and is aimed at demonstrating the improvement of their performance over the years, which was brought by the development of the new types of stationary phase architecture.     

Study of Sorption Properties for Lead(II) Ions Exhibited by Anion Exchangers Synthesized on the Basis of Aromatic Hydrocarbons,Epichlorohydrin, and Polyethyleneimine

Aromatic hydrocarbons, epichlorohydrin, and polyethyleneimine were used to synthesize polyfunctional anion exchangers. IR spectroscopy and elemental analysis were used to examine their composition and structure. The method of classical polarography was employed to examine the process of extraction of lead ions and determine the dependences of the sorption of lead(II) ions in the static mode on the solution acidity, concentration of metal ions, and duration of contact between ion exchangers and a Pb(NO₃)₂ solution. It was found that the ion exchangers possess high sorption properties for lead ions.     

除Cs用无机离子交换剂的筛选

本文对用于酸性高放废液除Ｃｓｗ的五大类,２０余种无机离子交换剂的Ｃｓ性能进行了研究和比较,确定凝胶－溶胶法制备的亚铁氰化钾钛为我国酸性高放废液除Ｃｓ的首选无机离子交换剂。     

Removal of185W,99Mo and125Sb radioisotopes from aqueous solutions using polyamine incorporated polysaccharides

Polyamino group-containing resins act both as chelating ion exchangers and weakly basic anion exchangers depending upon the species in contact in the solution. In the present work, ion exchangers based on polyamine incorporated polysaccharides (cellulose and galactomannan or guaran) have been used for removal of radioisotopes of¹⁸⁵W as WO ₄ ^2– ,⁹⁹Mo as MoO ₄ ^2– and¹²⁵Sb as Sb³⁺ from their separate aqueous solutions. These chelating anion exchangers have been synthesized by reaction of polysaccharides with epichlorohydrin followed by the respective polyamines as nucleophiles in a strongly alkaline medium. WO ₄ ^2– and MoO ₄ ^2– are adsorbed from their aqueous solutions through anion exchange process by chloride form of cellulose-triethylenetetraamine (cellulose-trien), cellulose-tetraethylenepentaamine (cellulose-tetren), guaran-triethylenetetraamine (guar-trien) and guar-tetraethylenepentaamine (guar-tetren) weakly basic anion exchangers. Guar-tetren chelating polymer has been found to be highly selective for¹²⁵Sb isotopes presumably due to the presence of chelating cis-hydroxy and tetren groups in the galactomannan matrix.     

Evaluation of "labile" metal in sediments by use of ion-exchange resins

The metal content of a series of contaminated sediments has been determined by equilibrating ion-exchange resins of different types (held in porous cages) with aqueous suspensions of the sediments. H(+)-form exchangers took up high proportions of the Cu, Pb, Zn and Cd contents with recoveries depending on whether the acid functional groups were strong. Na(+)-form exchangers took up a smaller, loosely bound, labile fraction. The metal ions held on the exchangers were back-extracted into 0.05M EDTA and determined by flame AAS. Dissolution of sediment components led to the exchangers also taking up large amounts of Ca, Mg, Fe and Al. The exchange-resin technique provides an alternative means of subdividing the metal content of sediments into different "labile" or "available" fractions. Possible advantages include minimal re-adsorption of released metal ions by the sediment phases, retention of only "labile" species (ions or complexes), and a transfer mechanism which may resemble the action of plant roots more closely than chemical extractant processes do.     

Preparation of poly(glycidylmethacrylate‐divinylbenzene) weak acid cation exchange stationary phases with succinic anhydride,phthalic anhydride,and maleic anhydride for ion chromatography

In this work, poly(glycidylmethacrylate‐divinylbenzene) microspheres were prepared and applied for the preparation of weak acid cation exchange stationary phases. Succinic anhydride, phthalic anhydride, and maleic anhydride were selected as carboxylation reagents to prepare three weak acid cation exchangers by direct chemical derivatization reaction without solvent or catalyst. The diameters and dispersity of the microspheres were characterized by scanning electron microscopy; the amount of accessible epoxy groups and mechanical stability were also measured. The weak acid cation exchangers were characterized by Fourier transform infrared spectroscopy; the content of carboxyl groups was measured by traditional acid base titration method. The chromatographic properties were characterized and compared by separating alkali, alkaline earth metal ions and ammonium and polar amines. The separation properties enhanced in the order of succinic anhydride, phthalic anhydride, and maleic anhydride modified poly(glycidylmethacrylate‐divinylbenzene) cation exchangers.     

农副产品制备纤维素强阴离子交换剂

阴离子染料;脱色;农副产品制备纤维素强阴离子交换剂