Adsorption of human serum albumin (HSA) onto colloidal TiO2 particles, Part I

The adsorption of human serum albumin (HSA) onto colloidal TiO2 (P25 Degussa) particles was studied in NaCl electrolyte at different solution pH and ionic strength. The HSA-TiO2 interactions were studied using adsorption isotherms and the electrokinetic properties of HSA-covered TiO2 particles were monitored by electrophoretic mobility measurements. The adsorption behavior shows a remarkable dependence of the maximum coverage degree on pH and was almost independent of the ionic strength. Other characteristic features such as maximum adsorption values at the protein isoelectric point (IEP approximately 4.7) and low-affinity isotherms that showed surface saturation even under unfavorable electrostatic conditions (at pH values far away from the HSA IEP and TiO2 PZC) were observed. Structural and electrostatic effects can explain the diminution of HSA adsorption under these conditions, assuming that protein molecules behave as soft particles. Adsorption reactions are discussed, taking into account acid-base functional groups of the protein and the surface oxide in different pH ranges, considering various types of interactions.     

An in situ Infrared Spectroscopic Study of Glutamic Acid and of Aspartic Acid Adsorbed on TiO(2): Implications for the Biocompatibility of Titanium

In situ ATR-IR spectroscopy has been applied to the study of glutamic (Glu) and aspartic (Asp) acid adsorbed on amorphous TiO(2) particle films. Unlike Asp, which gives evidence of one major adsorbed species, Glu yields several spectroscopically distinct structures upon adsorption to TiO(2). The pH dependence of Glu and Asp adsorption is also different, with Glu adsorbing markedly to TiO(2) at pH where electrostatic interactions between the surface and adsorbate are unfavorable. Application of the Langmuir model to adsorption isotherms yields a single binding constant for Asp and two binding constants for Glu, further supporting the evidence for different adsorbed Glu species. This is the first investigation of the molecular structure of Glu and Asp species adsorbed on amorphous TiO(2) using in situ ATR-IR spectroscopy. Copyright 2000 Academic Press.     

Synthesis of uniform anatase TiO2 nanoparticles by gel-sol method. 4. Shape control

Uniform anatase-type TiO(2) nanoparticles of different shapes have been formed by phase transformation of a Ti(OH)(4) gel matrix in the presence of shape controllers. For example, triethanolamine (TEOA) was found to change the morphology of TiO(2) particles from cuboidal to ellipsoidal at pH above 11. The shape control can be explained in terms of the specific adsorption of TEOA onto the crystal planes parallel to the c-axis of the tetragonal system in the alkaline range, as supported by the observation of preferential adsorption of TEOA onto the crystal planes parallel to the c-axis at pH 11.5 and by the pH dependence of the adsorption onto ellipsoidal particles. Diethylenetriamine (DETA) also modified the particle shape to ellipsoidal above pH 9.5 and the aspect ratio was much higher than with TEOA. The mechanism of the shape control could be explained in the same way as with TEOA, since analogous specific adsorption was observed with DETA as well. Similar shape control to yield ellipsoidal particles of a high aspect ratio was also achieved with other primary amines, such as ethylenediamine (ED), trimethylenediamine (TMD), and triethylenetetramine (TETA). However, secondary amines, such as diethylamine, and tertiary amines, such as trimethylamine and triethylamine, acted as a complexing agent of Ti(IV) ions to promote the growth of ellipsoidal particles of a low aspect ratio, rather than a shape controller to produce ellipsoids of a high aspect ratio. Sodium oleate and sodium stearate were found to modify the particle shape from round-cornered cubes to sharp-edged cubes. The mechanism was explained in terms of the reduction of the specific surface energies of the [001] and [100] planes of the tetragonal crystal system by the preferential adsorption of oleate or stearate ion onto these planes, based on the adsorption experiment using ellipsoidal and cubic particles.     

纳米TiO_2对水中腐殖酸的吸附及光催化降解

研究了水体中腐殖酸 ( HA)在纳米 Ti O2 颗粒上的吸附行为 ,并探讨了其吸附机理 ,还研究了 HA的Ti O2 光催化降解效果 .结果表明 ,Ti O2 对 HA的吸附作用明显依赖于水溶液的 p H,也取决于 Ti O2 的零电荷点 ;HA的光催化降解效果与其在催化剂表面的吸附行为密切相关 ,提高吸附速率 ,HA的去除率也随之提高 ;增加催化剂用量也能改善降解程度     

The Adsorption and Photocatalytic Decomposition of Citric Acid on Pt/TiO_2

The adsorption and photocatalutic decomposition of citric acid on both Pt/TiO2 powder and n-TiO2 single crystal electrode were studied in aqueous solutions of various pH. It was found that citrate ions were chemisorbed on TiO2, which could increase the interfacial capacity and the filling factor of photocurrent-potential curves. The quantity of adsorption, slope of mott-Shottky plot and the rate of photocatalytic decomposition of citric acid were found to depend strongly on pH of solution. The phot ocatalytic decomposition of citric acid was discussed in light of its adsorption on TiO2.     

Adsorption of poly(acrylic acid) onto the surface of titanium dioxide and the colloidal stability of aqueous suspension

The adsorption of poly(acrylic acid) (PAA) in aqueous suspension onto the surface of TiO(2) nanoparticles was investigated. FTIR spectroscopic data provided evidence in support of hydrogen bonding and chemical interaction in the case of the PAA-TiO(2) system. Adsorption isotherms demonstrated that part of the PAA initially added to the suspension was adsorbed onto the TiO(2) surface, after which there was a gradual attainment of an adsorption plateau. The adsorption density of PAA was found to increase with an increase of PAA molecular weight, while it decreased with an increase of pH. The thickness of the PAA adsorption layer was calculated based on measurements of suspension viscosities in the absence and presence of PAA. It was shown that the thickness of the adsorption layer increased with the increase of pH, PAA molecular weight, and its concentration. The surface charge density, the diffuse charge density, and the zeta potential of TiO(2) varied distinctly after PAA adsorption. The shift of pH(iep) toward a lower pH value was observed in the presence of PAA. PAA was found to stabilize the suspension of TiO(2) nanoparticles through electrosteric repulsion. The influence of factors such as PAA molecular weight and its concentration on the colloidal stability of the aqueous suspension was also investigated.     

Anion specific adsorption on Fe2O3 and AlOOH nanoparticles in aqueous solutions: comparison with hematite and gamma-Al2O3

The specific adsorption of radiolabeled sulfate and phosphate ions from perchlorate supporting electrolyte onto nano-AlOOH and nano-Fe(2)O(3) powder has been investigated. The pH dependence of the adsorption of anions onto nanopowders was compared with that of the same ions onto gamma-Al(2)O(3) and hematite. It was demonstrated that the character of the pH dependence of the adsorption is very similar in the comparable cases. It was found, however, that in contrast to the behavior of gamma-Al(2)O(3), nano-AlOOH dissolves at a significant rate at low pH values (pH<2). Thus the study of the pH dependence of the anion adsorption encounters difficulties at these pH values. Disregarding this fact, it can be concluded that no special effects can be observed in the anion adsorption onto the nano-oxides studied.     

Study of the adsorption behavior of heavy metal ions on nanometer-size titanium dioxide with ICP-AES

A new method using nanoparticle TiO2 as solid-phase extractant coupled with ICP-AES was proposed for simultaneous determination of trace elements. The adsorption behavior of nanometer TiO2 towards Cu, Cr, Mn and Ni was investigated by ICP-AES, and the adsorption pH curves, adsorption isotherms and adsorption capacities were obtained. It was found that the adsorption rates of the metal ions studied were more than 90% in pH 8.0-9.0, and 2.0 mol L-1 HCl was sufficient for complete elution. Nanometer TiO2 possesses a significant capacity for the sorption of the metal ions studied which is higher than the capacity of silica, the commonly used extractant. The method has been applied to the analysis of some environmental samples with satisfactory results.     

纳米TiO-2对模型病毒-f2噬菌体的吸附特性

为了提高饮用水处理系统对病毒的去除效果,本研究采用静态实验,研究纳米TiO2对模型病毒—f2噬菌体的吸附去除特性,系统考察TiO2投加浓度、病毒浓度、温度及pH值等因素对吸附效果的影响.实验结果表明：f2噬菌体在纳米TiO2表面的吸附符合准二级吸附动力学模型,遵循化学吸附机理,颗粒内扩散为该吸附过程中的速率控制步骤,但不是唯一控制步骤;纳米TiO2对f2噬菌体的吸附符合Freundlich等温吸附模型（qe=27.4Ce1.24）,属于多层吸附类型;在20~40℃范围内,温度对纳米TiO2的吸附性能影响不大,而酸性条件下更有利于纳米TiO2对f2噬菌体的吸附.     

Physicochemical characterization of an anatase TiO2 surface and the adsorption of a nonionic surfactant: an atomic force microscopy study

Atomic force microscopy was used to characterize an anatase TiO2 surface, prepared by the helical vapor preparation method. The forces between two bare TiO2 surfaces were measured in the presence of water at various pH values. This TiO2 isoelectric point (iep) was characterized by the presence of only a van der Waals attraction and was measured at pH 5.8; this value is similar to that for a rutile TiO2 surface. The adsorption mechanism of a nonionic surfactant molecule to this anatase TiO2 surface was investigated by measuring the forces between two such TiO2 surfaces at their iep pH in the presence of linear dodecanol tetraethoxylate (C12E4), a poly(ethoxylene oxide) n-alkyl ether. C12E4 was seen by the presence of steric forces to adsorb to the uncharged TiO2 surface. For low surfactant concentrations, C12E4 adsorbed with its hydrophobic tail facing the TiO2 substrate, to reduce its entropically unfavorable contacts with water. Additional surfactant adsorption occurred at higher surfactant concentrations by the hydrophobic and hydrophilic interactions between the surfactant tails and heads, respectively, and gave sub-bilayers. A two-step adsorption isotherm was subsequently proposed with four regions: (1) submonolayer, (2) complete monolayer, (3) sub-bilayer, and (4) bilayer. The absence of a long-range repulsive force between the two TiO2 surfaces in the presence of the C12E4 surface aggregates indicated that a C12E4 nonionic surfactant aggregate did not possess charge.     

Some peculiarities in the specific adsorption of phosphate ions on hematite and gamma-Al2O3 as reflected by radiotracer studies

The specific adsorption of radiolabeled phosphate ions from perchlorate supporting electrolyte onto gamma-Al2O3 and hematite powder has been investigated. The pH dependence of the adsorption of phosphate species was compared with that of sulfate ions. It was demonstrated that in contrast to the behavior of sulfate ions the pH dependence of phosphate ions goes through a maximum. On the other hand, it was found that the reversible adsorption of phosphate ions is accompanied by the formation of strongly chemisorbed species. Results obtained from a study of the competitive adsorption of sulfate and phosphate ions at various pH values are reported and interpreted. An attempt is made to correlate the experimental findings with the models for anion adsorption reported in the literature.     

Application of the Radiotracer Technique for the Study of the Specific Anion Adsorption on Al(2)O(3) in Acidic Medium

The specific adsorption of radiolabeled anions (sulfate, chloride) from perchlorate supporting electrolyte on gamma-Al(2)O(3) powder has been investigated. It was demonstrated that a measurable adsorption occurs only at pH values under pH 6. The adsorption capacity of a given amount of gamma-Al(2)O(3) powder tends to a limiting value with decreasing pH. A Langmuir-like adsorption isotherm describes the concentration dependence of the adsorption of sulfate species. It was found that the experimental results are very similar to those obtained in the case of hematite. Copyright 2000 Academic Press.     

Synthesis of uniform anatase TiO2 nanoparticles by gel-sol method. 3. Formation process and size control

Uniform anatase-type TiO(2) nanoparticles were prepared by the gel-sol process from a condensed Ti(OH)(4) gel preformed by the hydrolysis of a Ti-triethanolamine (TEOA) complex. The particle size of the anatase TiO(2) was increased from ca. 5 to 30 nm with pH increasing from 0.6 to 12 by aging the Ti(OH)(4) gel at 140 degrees C for 72 h, while the yield of the anatase TiO(2), 100% below pH 9.6, started to decrease from pH 10, to 67% at pH 11.5 and only 9% at pH 12.2. These results reveal a significant reduction of the nucleation rate of the anatase TiO(2) with increasing pH, as is explained by the reduction of the concentration of a precursor complex, Ti(OH)(3)(+), and the adsorption of hydroxide ion onto the embryos of TiO(2). Triethanolamine appeared to enhance the pH effect on the nucleation rate of anatase TiO(2) particles by adsorption onto their embryos, leading to the wide range of the size control. Triethanolamine was also found to act as a shape controller of the anatase TiO(2) particles for yielding ellipsoidal particles from Ti(OH)(4) gel at a relatively high pH above 11. The particle size was also controlled by seeding of anatase TiO(2). Moreover, the seeding experiment suggested that the rate-determining step of the gel-sol process was not the dissolution of the hydroxide gel, but the deposition of the monomeric precursor from the solution phase.     

Adsorption of paraquat on mesoporous silica modified with titania: effects of pH, ionic strength and temperature

The adsorption of the herbicide paraquat (PQ(2+)) on the binary system titania-silica has been studied in batch experiments by performing adsorption isotherms under different conditions of pH, supporting electrolyte concentration, and temperature. Adsorption kinetic on the studied material has also been carried out and discussed. PQ(2+) adsorption is very low on the bare silica surface but important on the composed TiO(2)-SiO(2) adsorbent. In this last case, the adsorption increases by increasing pH and decreasing electrolyte concentration. There are no significant effects of temperature on the adsorption. The increase of the adsorption in TiO(2)-SiO(2) seems to be related to an increase in acid sites of the supported titania and to the homogenously dispersion of the TiO(2) nanoparticles over the silica support. The adsorption takes place by direct binding of PQ(2+) to TiO(2) leading to the formation of surface species of the type SiO(2)-TiO(2)-PQ(2+). Electrostatic interactions and charge-transfer and outer-sphere complexes formations seem to play a key role in the adsorption mechanism. The analysis of thermodynamic parameters suggests that the adsorption on TiO(2)-SiO(2) is endothermic and spontaneous in nature.     

EDTA effect on the removal of Cu(II) onto TiO2

The adsorption of Cu(II) and Cu(II)-EDTA onto TiO2 with variations in the pH, concentration, and molar ratio of Cu(II) to EDTA has been studied. The adsorption of Cu(II) and Cu(II)-EDTA onto TiO2 showed typical cationic- and anionic-type behavior, respectively. The removal of Cu(II) in an EDTA-excess system was less than that in an equimolar Cu(II)/EDTA system due to the competitive adsorption of EDTA and Cu(II)-EDTA onto the TiO2. The removal of Cu(II) was favorable at low pH for both the equimolar and EDTA-excess systems, while significant Cu(II) removal was observed over the entire pH range in a copper-excess system. For model predictions, the MINTEQA2 program employing an inner-sphere complexation and a diffuse layer model was used; the surface complexes used included Ti(OH2)OCu+, Ti(OH)EDTAH2-(2), and Ti(OH)EDTACu2-.     

钛酸盐(钴、镓)沸石分子筛的合成与表征

钛酸钴;钛酸镓;水热合成;钛酸盐(钴、镓)沸石分子筛的合成与表征     

Synthesis of uniform anatase TiO2 nanoparticles by the gel-sol method 2. Adsorption of OH- Ions to Ti(OH)4 gel and TiO2 particles

The pH value in the gel-sol system for the preparation of uniform anatase TiO2 nanoparticles, as a decisive factor for controlling the size and shape of the final product, was found to be significantly changed during the formation process of the anatase TiO2 particles from a condensed Ti(OH)4 gel. The dramatic evolution of pH with the progress of the synthetic process has clearly been explained in terms of the adsorption and desorption of a hydroxide ion (OH-) ora proton (H+) on the solids transforming with time. The adsorption and desorption of OH- or H+ were enhanced by the presence of an inert electrolyte such as NaClO4, as explained by its shielding effect on the electrical interactions between the electrically charged precipitates and free OH- and H+ ions. The electrolyte also hampered the phase transformation of Ti(OH)4 precipitate to anatase TiO2. This effect of electrolytes was explained in terms of the inhibited nucleation of anatase TiO2 by enhanced adsorption of OH- ions toTiO2 embryos. The points of zero charge (PZC) of the amorphous Ti(OH)4 precipitate and the anatase TiO2 particles at 25 degrees C were obtained from the change in pH associated with the adsorption and desorption of OH- or H+, i.e., 4.6 for Ti(OH)4 precipitate and 6.0 for anatase TiO2 in the presence of 0.1 mol dm(-3) NaClO4. The PZCof the Ti(OH)4 precipitate measured at 25 degrees C after additional aging at 100 degrees C for 30 min was shifted to 4.1, owing to the promoted adsorption of OH-.     

Adsorption and photocatalytic decomposition of amino acids in TiO2 photocatalytic systems

The adsorption and photodecomposition of seven kinds of amino acids on a TiO2 surface were investigated by zeta potential measurements and 1H NMR spectroscopy in TiO2 aqueous suspension systems. The decomposition rates increased in the order of Phe < Ala < Asp < Trp < Asn < His < Ser. For Phe, Trp, Asn, His, and Ser, the isoelectric point (IEP) of TiO2 shifted to a lower pH with increasing decomposition rates upon adsorption on TiO2, suggesting that the effective adsorption and photocatalytic sites for these amino acids should be the basic terminal OH on the solid surface. Since the amino acids that decomposed faster than the others contain -OH (Ser), -NH (Trp, His), or -NH2 (Asn) in their side chain, they are considered to interact with the basic terminal OH groups more preferably by the side chain and are vulnerable to photocatalytic oxidation. On the other hand, Ala interacts with the acidic bridged OH on TiO2 to cause an IEP shift to a higher pH. The correlation of the surface hydroxyl groups with the photocatalysis of amino acids was verified by the use of calcined TiO2 without surface hydroxyl groups.     

纳米二氧化钛富集-分光光度法测定水体中痕量5-磺基水杨酸

采用纳米TiO2化学吸附法富集水样中痕量5-磺基水杨酸。5-磺基水杨酸含有酚羟基(OH)和羧基(COOH)可与TiO2表面上的羟基(OH)发生酯化反应,形成稳定的六元环结构。纳米TiO2对5-磺基水杨酸的吸附量≤18.47mg/g,在pH2.5、吸附时间20min、吸附剂用量1.80g/L的条件下,纳米TiO2对试样中5-磺基水杨酸的吸附率达到99.0%,以5mL2mol/L NaOH为洗脱液,洗脱率达99.8%,对试样中5-磺基水杨酸的富集倍数达50倍,检出限(3σ,n=11)为26.7μg/L。本法操作简便,直接用于九龙江和海水中痕量5-磺基水杨酸的测定,结果准确,回收率达到95.5%～98.5%。