A note on the flow time and the number of tardy jobs in stochastic open shops

In this note open shops with two machines are considered. The processing time of job j, j = 1, …, n, on machine 1 (2) is a random variable X_j (Y_j), which is exponentially distributed with rate γ (μ). If the completion time of job j is C_j, a waiting cost is incurred of g(C_j), where g is a function that is increasing concave. The preemptive policy that minimizes the total expected waiting cost E(Σg(C_j)) is determined. Two machine open shops with jobs that have random due dates are considered as well. For the case where the due dates D₁,…,D_n are exchangeable, the preemptive policy that minimizes the expected number of tardy jobs is determined.     

Scheduling open shops with parallel machines

The parallel shop and the open shop are two machine environments that have received much attention in the literature of scheduling theory. A common generalization—the open shop with parallel machines—is considered in this paper. Polynomial-time algorithms are presented for obtaining minimum-length preemptive schedules for three cases. Open shops with single-operation machines of equal speed are scheduled with essentially no more difficulty than an ordinary open shop. Open shops with multiple-operation machines of equal speed are scheduled with the aid of a sequence of network flow computations. The general open shop problem with parallel machines of arbitrary speeds can be solved by linear programming, in much the same way as an optimal preemptive schedule can be found for unrelated parallel machines.     

Minimizing the weighted number of tardy jobs on a single machine with release dates

In this paper, we describe an exact algorithm to minimize the weighted number of tardy jobs on a single machine with release dates. The algorithm uses branch-and-bound; a surrogate relaxation resulting in a multiple-choice knapsack provides the bounds. Extensive computational experiments indicate the proposed exact algorithm solves either weighted or unweighted problems. It solves the hardest problems to date. Indeed, it solves all previously unsolved instances. Its run time is the shortest to date.     

Minimizing the expected weighted number of tardy jobs in stochastic flow shops

This paper is devoted to two types of stochastic scheduling problems, one involving a single machine and the other involving a flow shop consisting of an arbitrary number of machines. In both problem types, all jobs to be processed have due dates, and the objective is to find a job sequence that minimizes the expected weighted number of tardy jobs. For the single-machine case, sufficient optimality conditions for job sequences are derived for various choices of due date and processing time distributions. For the case of a flow shop with an arbitrary number of machines and identically distributed due dates for all jobs, we prove the following intuitively appealing results: (i) when all jobs have the same processing time distributions, the expected weighted number of tardy jobs is minimized by sequencing the jobs in decreasing order of the weights, (ii) when all weights are equal, the jobs should be sequenced according to an increasing stochastic ordering of the processing time distributions.     

Single machine batch scheduling to minimize the weighted number of late jobs

The single machine batch scheduling problem to minimize the weighted number of late jobs is studied. In this problem,n jobs have to be processed on a single machine. Each job has a processing time, a due date and a weight. Jobs may be combined to form batches containing contiguously scheduled jobs. For each batch, a constant set-up time is needed before the first job of this batch is processed. The completion time of each job in the batch coincides with the completion time of the last job in this batch. A job is late if it is completed after its due date. A schedule specifies the sequence of jobs and the size of each batch, i.e. the number of jobs it contains. The objective is to find a schedule which minimizes the weighted number of late jobs. This problem isNP-hard even if all due dates are equal. For the general case, we present a dynamic programming algorithm which solves the problem with equal weights inO(n ³) time. We formulate a certain scaled problem and show that our dynamic programming algorithm applied to this scaled problem provides a fully polynomial approximation scheme for the original problem. Each algorithm of this scheme has a time requirement ofO(n ³/ +n ³ logn). A side result is anO(n logn) algorithm for the problem of minimizing the maximum weight of late jobs.Supported by INTAS Project 93-257.     

Nonpreemptive open shop with restricted processing times

A polynomial time algorithm was given by Fiala for the nonpreemptivem-processor open shop problem whenever the sum of processing times for one processor is large enough with respect to the maximal processing time. Here a special case where all processing times are from a bounded cardinality set of nonnegative integers is studied. For such a situation we give anO(nm) algorithm while the algorithm of Fiala works inO(n ² m ³) wheren is the number of jobs.     

On unit time open shops with additional restrictions

We consider open shop problems with unit processing times,n jobs have to be processed onm machines. The order in which a given job is processed on the machines is not fixed. For each job a release time or a due date may be given. Additional, we consider the restriction that every machine must perform all corresponding operations without any delay time. Unit time open shop problems with release times to minimize total completion time were unsolved up to now for both allowed and forbidden delay times. We will solve these problems in the case of two and three machines. Furthermore we will give polynomial algorithms for several no-delay-problems with due dates.     

Minimizing makespan in a two-stage hybrid flow shop scheduling problem with open shop in one stage

This paper considers a scheduling problem in two-stage hybrid flow shop, where the first stage consists of two machines formed an open shop and the other stage has only one machine. The objective is to minimize the makespan, i.e., the maximum completion time of all jobs. We first show the problem is NP-hard in the strong sense, then we present two heuristics to solve the problem. Computational experiments show that the combined algorithm of the two heuristics performs well on randomly generated problem instances.     

On the optimality of static policy in stochastic open shop

Consider n jobs and two machines. Each job has to be processed on both machines. The order in which it is dome is immaterial. However, the decision maker has to decide in advance which jobs will be processes first on machine 1 (2). We assume that processing times on each machine are identically exponentially distributed random variables. We prove that assigning equal number of jobs to be first processed by machine 1 (2) stochastically minimizes the makespan.     

Minimizing the weighted number of tardy jobs on parallel processors

We present a branch-and-bound algorithm to minimize the weighted number of tardy jobs on either identical or non-identical processors. Bounds come from a surrogate relaxation resulting in a multiple-choice knapsack. Extensive computational experiments indicate problems with 400 jobs and several machines can be solved quickly. The results also indicate what parameters affect solution difficulty for this algorithmic approach.     

Customer order scheduling to minimize the number of late jobs

In the order scheduling problem, every job (order) consists of several tasks (product items), each of which will be processed on a dedicated machine. The completion time of a job is defined as the time at which all its tasks are finished. Minimizing the number of late jobs was known to be strongly NP-hard. In this note, we show that no FPTAS exists for the two-machine, common due date case, unless P = NP. We design a heuristic algorithm and analyze its performance ratio for the unweighted case. An LP-based approximation algorithm is presented for the general multicover problem. The algorithm can be applied to the weighted version of the order scheduling problem with a common due date.     

一种求解延迟工件数最小的混合流水车间调度问题的模拟退火算法

针对延迟工件数最小的混合流水车间调度问题,给出了一种改进的模拟退火求解算法. 该算法首先给出一个启发式算法来获得初始解,然后用模拟退火算法对初始解改进. 通过交换工件在第一阶段的排序来获得一个新的解,采用最先空闲设备分配规则和先到先被加工规则,对工件在剩余各级的工序进行调度. 实验仿真表明算法是可行有效的.     

Minimizing the number of machines for scheduling jobs with equal processing times

In this paper, we consider a parallel machine environment when all jobs have the same processing time and arbitrary release dates and deadlines of the jobs are given. We suppose that the available number of machines, which can be used simultaneously, may vary over time. The aim is to construct a feasible schedule in such a way that the maximal number of simultaneously used machines is minimal. We give a polynomial algorithm for this problem.     

Minimizing total weighted late work in the resource-constrained project scheduling problem

This paper deals with resource-constrained project scheduling problem under the weighted late work criterion. Late work objective functions estimate the quality of a schedule based on durations of late parts of activities, not taking into account the amount of delay for fully late activities. It is assume that a project contains activities interrelated by finish-to-start type precedence relations with time lag of zero, which require one or more constrained renewable resources. The objective is to schedule each activity such that the total weighted late work is minimized. The problem has been formulated using a linear integer programming model and solved by the CPLEX. Also, a set of priority rules have been designed to quickly generate a set of initial solutions. In order to solve the problem optimally, a depth-first branch-and-bound algorithm is applied based on idea of minimal delaying alternatives. The branching order of nodes that belong to the same level of the search tree is determined on the basis of the developed priority rules. This results in generation six different versions of the branch-and-bound algorithm. Computational results on randomly generated problem sets are provided to analyze the efficiency of the priority rules and the branch-and-bound algorithm.     

Minimizing the weighted number of tardy jobs with due date assignment and capacity-constrained deliveries for multiple customers in supply chains

In this paper, an integrated due date assignment and production and batch delivery scheduling problem for make-to-order production system and multiple customers is addressed. Consider a supply chain scheduling problem in which n orders (jobs) have to be scheduled on a single machine and delivered to K customers or to other machines for further processing in batches. A common due date is assigned to all the jobs of each customer and the number of jobs in delivery batches is constrained by the batch size. The objective is to minimize the sum of the total weighted number of tardy jobs, the total due date assignment costs and the total batch delivery costs. The problem is NP-hard. We formulate the problem as an Integer Programming (IP) model. Also, in this paper, a Heuristic Algorithm (HA) and a Branch and Bound (B&B) method for solving this problem are presented. Computational tests are used to demonstrate the efficiency of the developed methods.     

A branch-and-check algorithm for minimizing the weighted number of late jobs on a single machine with release dates

In this paper we consider the scheduling problem of minimizing the weighted number of late jobs on a single machine (1|_rj|∑_wjUj)$\left(1|r_j|\sum w_j{U}_j\right)$. A branch-and-check algorithm is proposed, where a relaxed integer programming formulation is solved by branch-and-bound and infeasible solutions are cut off using infeasibility cuts. We suggest two ways to generate cuts. First, tightened “no-good” cuts are derived using a modification of the algorithm by Carlier (1982, EJOR, v.11, 42–47) which was developed for the problem of minimizing maximum lateness on a single machine. Secondly we show how to create cuts by using constraint propagation. The proposed algorithm is implemented in the Mosel modelling and optimization language. Computational experiments on instances with up to 140 jobs are reported. A comparison is presented with the exact approach of Péridy at al. (2003, EJOR, v.148, 591–603).     

Minimizing the weighted number of tardy jobs with due date assignment and capacity-constrained deliveries

We study a supply chain scheduling problem, where a common due date is assigned to all jobs and the number of jobs in delivery batches is constrained by the batch size. Our goal is to minimize the sum of the weighted number of tardy jobs, the due-date-assignment costs and the batch-delivery costs. We show that some well-known NPmathcal{NP}-hard problems reduce to our problem. Then we propose a pseudo-polynomial algorithm for the problem, establishing that it is NPmathcal{NP}-hard only in the ordinary sense. Finally, we convert the algorithm into an efficient fully polynomial time approximation scheme.     

Online scheduling of ordered flow shops

We consider online as well as offline scheduling of ordered flow shops with the makespan as objective. In an online flow shop scheduling problem, jobs are revealed to a decisionmaker one by one going down a list. When a job is revealed to the decision maker, its operations have to be scheduled irrevocably without having any information regarding jobs that will be revealed afterwards. We consider for the online setting the so-called Greedy Algorithm which generates permutation schedules in which the jobs on the machines are at all times processed without any unnecessary delays. We focus on ordered flow shops, in particular proportionate flow shops with different speeds and proportionate flow shops with different setup times. We analyze the competitive ratio of the Greedy Algorithm for such flow shops in the online setting. For several cases, we derive lower bounds on the competitive ratios.     

Minimizing the number of workers in a paced mixed-model assembly line

We study a problem of minimizing the maximum number of identical workers over all cycles of a paced assembly line comprised of m stations and executing n parts of k types. There are lower and upper bounds on the workforce requirements and the cycle time constraints. We show that this problem is equivalent to the same problem without the cycle time constraints and with fixed workforce requirements. We prove that the problem is NP-hard in the strong sense if $m=4$ and the workforce requirements are station independent, and present an Integer Linear Programming model, an enumeration algorithm and a dynamic programming algorithm. Polynomial in k and polynomial in n algorithms for special cases with two part types or two stations are also given. Relations to the Bottleneck Traveling Salesman Problem and its generalizations are discussed.     

On minimizing the weighted number of late jobs in unit execution time open-shops

We study unit execution time open-shops with integer release dates. This paper shows that, in this environment, the minimum weighted number of late jobs can be computed in polynomial time by dynamic programming. The complexity status of the corresponding problem Om|p_ij=1,r_i|∑w_iU_i was unknown before.