Aromatic pathways in mono- and bisphosphorous singly Möbius twisted [28] and [30]hexaphyrins

Magnetically induced current densities and strengths of currents passing through selected bonds have been calculated for monophosphorous [28]hexaphyrin ((PO)[28]hp) and for bisphosphorous [30]hexaphyrin ((PO)(2)[30]hp) at the density functional theory level using our gauge-including magnetically induced current (GIMIC) approach. The current-density calculations yield quantitative information about electron-delocalization pathways and aromatic properties of singly M?bius twisted hexaphyrins. The calculations confirm that (PO)[28]hp sustains a strong diatropic ring current (susceptibility) of 15 nA T(-1) and can be considered aromatic, whereas (PO)(2)[30]hp is antiaromatic as it sustains a paratropic ring current of -10 nA T(-1). Numerical integration of the current density passing through selected bonds shows that the current is generally split at the pyrroles into an outer and an inner pathway. For the pyrrole with the NH moiety pointing outwards, the diatropic ring current of (PO)[28]hp takes the outer route across the NH unit, whereas for (PO)(2)[30]hp, the paratropic ring current passes through the inner C(β)=C(β) double bond. The main diatropic ring current of (PO)[28]hp generally prefers the outer routes at the pyrroles, whereas the paratropic ring current of (PO)(2)[30]hp prefers the inner ones. In some cases, the ring current is rather equally split along the two pathways at the pyrroles. The calculated ring-current pathways do not agree with those deduced from measured (1)H NMR chemical shifts.     

Iodonium salts are key intermediates in Pd-catalyzed acetoxylation of pyrroles

A mild, room-temperature Pd-catalyzed acetoxylation of pyrroles with phenyliodonium acetate is described. The acetoxylation was found to proceed via the initial formation of pyrrolyl(phenyl)iodonium acetates, which were converted to acetoxypyrroles in the presence of Pd(OAc)(2). The acetoxylation could also be carried out as a one-pot sequential procedure without the isolation of the intermediate iodonium salts.     

Pd-catalyzed selective addition of heteroaromatic C-H bonds to C-C triple bonds under mild conditions

Simple heteroarenes such as pyrroles and indoles undergo addition reactions to C-C triple bonds in the presence of a catalytic amount of Pd(OAc)(2) under very mild conditions, affording cis-heteroarylalkenes in most cases. The cleavage of aromatic C-H bonds is the possible rate-determining step in CH(2)Cl(2), and the addition of heteroaromatic C-H bonds to C-C triple bonds is in a trans-fashion.     

Cyclo[n]pyrroles: size and site-specific binding to G-quadruplexes

Inhibiting the enzyme telomerase by stabilizing the G-quadruplex has potential in anticancer drug design. Diprotonated cyclo[n]pyrroles represent a set of expanded porphyrin analogues with structures similar to that of telomestatin, a natural product known to bind to and stabilize G-quadruplexes. As a first step toward testing whether cyclo[n]pyrroles display a similar function, a series of diprotonated cyclo[n]pyrroles (where n = 6, 7, and 8) was each added to the human telomere repeat sequence d(T(2)AG(3))(4) and examined with mass spectrometry, ion mobility, and molecular dynamics calculations. Nano-ESI-MS indicated that the smaller the cyclo[n]pyrrole, the more strongly it binds to the telomeric sequence. It was also found that cyclo[6]pyrrole bound to d(T(2)AG(3))(4) better than octaethylporphyrin, a finding rationalized by cyclo[6]pyrrole having a 2+ charge, while octaethylporphyrin bears no charge. Ion mobility measurements were used to measure the collision cross section of each d(T(2)AG(3))(4)/cyclo[n]pyrrole complex. Only one peak was observed in the arrival time distributions for all complexes, and the experimental cross sections indicated that only structures with d(T(2)AG(3))(4) in an antiparallel G-quadruplex arrangement and each cyclo[n]pyrrole externally stacked below the G-quartets occur under these experimental conditions. When the cyclo[n]pyrroles were intercalated or nonspecifically bound to the quadruplex, or if conformations different than antiparallel were considered for d(T(2)AG(3))(4), the theoretical cross sections did not match experiment. On this basis, it is inferred that (1) external stacking represents the dominant binding mode for the interaction of cyclo[n]pyrroles with d(T(2)AG(3))(4) and (2) the overall size and charge of the cyclo[n]pyrroles play important roles in defining the binding strength.     

Utility of polymer-supported reagents in the total synthesis of lamellarins

Four solid-supported reagents have been utilized in the multistep synthesis of lamellarins. The use of Amberlyst A-26 Br(3)(-) and polymer bound pyridine hydrobromide perbromide (PVPHP) for keto alpha-bromination of the less studied ortho-substituted acetophenone derivatives selectively furnished the corresponding monobromination products (phenacyl bromide derivatives), which were used directly in condensation reactions with benzyldihydroisoquinoline mediated by Amberlyst A-26 NaCO(3)(-). The 2H-pyrrole carbonates subsequently underwent intramolecular Friedel-Crafts transacylation followed by lactonization to provide the lamellarin skeleton. Alternatively, Amberlyst A-26 NaCO(3)(-) effectively served as base in condensation reaction of benzyldihydroisoquinoline with alpha-nitrocinnamate derivatives to provide the corresponding 2-ethoxycarbonyl pyrroles, which smoothly underwent O-debenzylation reaction followed by lactonization to furnish the lamellarin skeleton. The novel Amberlyst-15 mediated lactonization reactions effectively combined the otherwise two separate steps into a single transformation.     

Manganese(III) acetate promoted regioselective phosphonation of heteroaryl compounds

[Structure: see text] A new method for direct phosphonation of thiazoles, furans, and pyrroles is introduced. Reactions of the heteroaryl compounds with dimethyl or diethyl phosphites and Mn(OAc)(3).2H2O under mild conditions give phosphonated products in high yield and good regioselectivity.     

Gold catalysis: phenol synthesis in the presence of functional groups

The effect of different substituents, such as bromo, chloromethyl, hydroxymethyl, formyl, acetyl, carboxy, and acylated hydroxymethyl and ammonium groups, on the furan ring of substrates in gold-catalyzed phenol synthesis has been investigated. The furan ring was also replaced by different heterocycles, such as pyrroles, thiophenes, oxazoles, and a 2,4-dimethoxyphenyl group; gold catalysis then delivered no phenols, but occasionally other products were obtained. [Ru(3)(CO)(12)] also catalyzed the conversion of 1 at a low rate, [Os(3)(CO)(12)] failed as a catalyst, and with [Co(2)(CO)(8)] the alkyne complex 19 can be obtained, it does not lead to any phenol but reacts with norbornene to give the product of a Pauson-Khand reaction. Efforts to prepare vinylidene complexes of 1 provided the only evidence for these species; in the presence of a phosphane ligand with ruthenium an interesting deoxygenation to 22 was observed. The phenol 2 c was converted to the allyl ether, a building block for para-Claisen rearrangements, and to the aryl triflate, a building block for cross-coupling reactions.     

NN型双齿半夹心Ru(Ⅱ)化合物:无受体脱氢环化合成喹啉和吡咯衍生物的催化剂

四个含NN型双齿配体的半夹心(η^6-p-cymene)Ru(II)化合物被成功制备.这四个化合物分别为(η^6-p-cymene)-Ru(C5H4N-C5H3N-OH)(1),(η^6-p-cymene)Ru(C5H4N-CH2-C5H4N)(2),(η^6-p-cymene)Ru(C5H4N-CH2-C5H3N-OH)(3)和(η^6-p-cymene)Ru(C5H4N-CH2-C5H3N-OCH3)(4).这些化合物通过核磁氢谱、碳谱和元素分析等手段表征,化合物2的结构被X射线单晶衍射证实.将这些化合物应用于催化氨醇与酮的环化反应,其中3的催化效率最高.在0.5mol%化合物3的存在下,制备了一系列喹啉和吡啶衍生物.     

Rhodium(III)-catalyzed arene and alkene C-H bond functionalization leading to indoles and pyrroles

Recently, the rhodium(III)-complex [Cp*RhCl(2)](2) 1 has provided exciting opportunities for the efficient synthesis of aromatic heterocycles based on a rhodium-catalyzed C-H bond functionalization event. In the present report, the use of complexes 1 and its dicationic analogue [Cp*Rh(MeCN)(3)][SbF(6)](2) 2 have been employed in the formation of indoles via the oxidative annulation of acetanilides with internal alkynes. The optimized reaction conditions allow for molecular oxygen to be used as the terminal oxidant in this process, and the reaction may be carried out under mild temperatures (60 °C). These conditions have resulted in an expanded compatibility of the reaction to include a range of new internal alkynes bearing synthetically useful functional groups in moderate to excellent yields. The applicability of the method is exemplified in an efficient synthesis of paullone 3, a tetracyclic indole derivative with established biological activity. A mechanistic investigation of the reaction, employing deuterium labeling experiments and kinetic analysis, has provided insight into issues of reactivity for both coupling partners as well as aided in the development of conditions for improved regioselectivity with respect to meta-substituted acetanilides. This reaction class has also been extended to include the synthesis of pyrroles. Catalyst 2 efficiently couples substituted enamides with internal alkynes at room temperature to form trisubstituted pyrroles in good to excellent yields. The high functional group compatibility of this reaction enables the elaboration of the pyrrole products into a variety of differentially substituted pyrroles.     

One-pot three-component catalytic synthesis of fully substituted pyrroles from readily available propargylic alcohols, 1,3-dicarbonyl compounds and primary amines

A simple and highly efficient method for the preparation of fully substituted pyrroles, from readily accessible secondary propargylic alcohols, 1,3-dicarbonyl compounds and primary amines, has been developed. The one-pot multicomponent reaction, which is catalysed by the system [Ru(eta(3)-2-C(3)H(4)Me)(CO)(dppf)][SbF(6)]/CF(3)CO(2)H (dppf: 1,1'-bis(diphenylphosphanyl)ferrocene), involves initial propargylation of the 1,3-dicarbonyl compound promoted by CF(3)CO(2)H and subsequent condensation between the resulting gamma-keto alkyne and the primary amine to afford a propargylated beta-enamino ester or ketone, which undergoes a ruthenium-catalysed 5-exo-dig annulation to form the final pyrrole.     

Alkylation of 1,3-dicarbonyl compounds with benzylic and propargylic alcohols using Ir-Sn bimetallic catalyst: synthesis of fully decorated furans and pyrroles

The heterobimetallic complex [Ir(COD)(SnCl₃)Cl(μ-Cl)]₂ catalyzes the direct substitution of hydroxyl groups in benzylic and propargylic alcohols by 1,3-dicarbonyl moiety. In 4-hydroxycoumarin, benzylation and propargylation occurs at the 3-position. Selective propargylation or allenylation takes place depending on the nature of propargylic alcohol. By applying the methodology, multi-substituted furans and pyrroles have been synthesized in good yields.     

The synthesis and properties of free-base [14]triphyrin(2.1.1) compounds and the formation of subporphyrinoid metal complexes

The synthesis of [14]triphyrin(2.1.1) compounds is described. In contrast with conventional subporphyrins, which consistently contain a central boron atom, free-base heteroaromatic compounds can be formed. A modified Lindsey method was used to prepare a range of different [14]triphyrins(2.1.1) in yields of up to 35% based on the reaction of diethylpyrrole (1a) and fused pyrroles of bicyclo[2.2.2]octadiene (BCOD) (2a-e) and dihydroethanonaphthalene (4a) with various aryl aldehydes. The concentration of BF(3)·OEt(2) catalyst plays the key role in determining the yield of the [14]triphyrin(2.1.1) macrocycle relative to the conventional tetrapyrrole porphyrin product. Retro-Diels-Alder reactions of 2a-e and 4a result in the formation of [14]tribenzotriphyrin (2.1.1) (3a-e) and [14]trinaphthotriphyrin(2.1.1) (5a). The effects of exocyclic ring annulation on the electronic structure are examined in detail based on optical spectroscopy, theoretical calculations, and electrochemical measurements. The availability of free-base compounds enables the formation of [Re(I)(CO)(3)(triphyrin)] (6a) and [Ru(II)(CO)(2)Cl(triphyrin)] (7a) complexes based on a modified retro-Diels-Alder reaction. X-ray structures are reported for 4a and 6a.     

Facile preparation of various heteroaromatic compounds via azatitanacyclopentadiene intermediates

Coupling of acetylene, nitrile, and a titanium reagent, Ti(O-i-Pr)(4)/2 i-PrMgCl, generated new azatitanacyclopentadienes in a highly regioselective manner. Their subsequent reaction with sulfonylacetylene afforded pyridyltitanium compounds, which, upon reaction with electrophiles, gave substituted pyridines virtually as a single isomer. When optically active nitriles were used in this reaction, chiral pyridines were obtained without loss of the enantiopurity. Alternatively, the azatitanacyclopentadiene prepared from an unsymmetrical acetylene reacted with an aldehyde or another nitrile to give furans or pyrroles having four different substituents again in a regioselective manner.     

Characterization of a glucose sensor prepared by electropolymerization of pyrroles containing a tris-bipyridine osmium complex.

A glucose sensor was developed by electrocopolymerization using pyrroles containing a tris-bipyridine (bpy) osmium complex (Os-py), pyrrole (py), pyrrole propanoic acid (PPA) and glucose oxidase (GOx) to improve the key performance characteristics, such as the sensitivity, selectivity, and long-term stability. Tris-bipyridine osmium pyrrole complexes with four different methylene moieties were utilized to correlate the methylene length with the glucose sensor performance. The electrocatalytic response of glucose was clearly observed at electrodes modified with Os-py, except for the electrode immobilized with the Os-py complex containing the shortest methylene moiety. The current response to glucose increased up to a concentration of 100 mmol dm(-3). The electrocatalytic response to glucose at the [Os(bpy)(2)(py(6)-bpy)](2+/3+)/py/PPA/GOx electrode was stable for more than 100 days. Dissolved oxygen and potential interference compounds (ascorbic acid, uric acid, and acetaminophen) minimally perturbed the current response to glucose at the [Os(DM-bpy)(2)(py(6)-bpy)](2+/3+)/py/PPA/GOx electrode. Based on these results, a longer methylene moiety appears to improve the performance characteristics of a glucose sensor fabricated via the electropolymerization of tris-bipyridine osmium pyrrole complexes.     

Silylamines in organic synthesis: preparation and some reactions of N,C-dilithiosilylamines

The dimetallation of some olefinic and aromatic N-trimethylsilylamines has been examined. Treatment with a two molar proportion of n-butyllithium gives organodimetallic reagents, which react with trimethylchlorosilane to give N,N,C-tris(trimethylsilyl)amines in 45 to 65% yields. The dianonic reagent obtained from (trimethylsilyl)(allyl)amine reacts with benzoyl chloride, N,N-dimethylformamide, ethyl-2-furylcarboxylate, and benzil to give substituted pyrroles and pyridines.     

Effect of Calix[4]pyrrole as Addition Reagent on Anions Separation in Capillary Zone Electrophoresis (CZE)

Calixpyrroles, as new macrocyclic receptors, have gain increasing interest in host-guest chemistry. Pioneering work in this area by Sessler and co-workers have evidenced that calix[4]pyrroles are effective anion binding agents and have used for anion binding, sensing and new anion separation technologies1, 2. In this letter, we report that calix[4]pyrroles A, B and C3,4 (Scheme 1) can serve as additives in CZE for the separa- tion of halide ions. Scheme 1 A B C When analyzing anions with…     

La(OTf)3 catalyzed synthesis of α-aryl tetrasubstituted pyrroles through [4+1] annulation under microwave irradiation

A La(OTf)₃ catalyzed synthesis of tetrasubstituted pyrroles under microwave irradiation has been developed affording various α-aryl tetrasubstituted pyrroles in acceptable to good yields (36–82% yield) through condensation/alkyne azacyclization/isomerization sequence. Functionalized α-aryl pentasubstituted pyrroles could be prepared from tetrasubstituted pyrroles through easy transformations.     

Accelerated arene ligand exchange in the (Arene)Cr(CO)2L series

Arene ligand exchange in the (eta(6)-arene)Cr(CO)(2)L series can be accelerated if the ligand L is an electronically unsymmetrical bidentate ligand. The system evaluated here employs derivatives of tris(pyrrolyl)phosphine as L. A series of 2-L'-substituted pyrroles was prepared, where the substituents include: L' = -SMe, -CH(2)SMe, -SPh, -CH(2)SPh, -SCF(3), -S-tBu, -CO(2)Me, -CONMe(2), -2-pyridinyl, and -PPh(2). Reaction with ClP(pyrrolyl)(2) gave a new series of phosphines, (2-L'-pyrrolyl)(pyrrolyl)(2)P. Each of these phosphines was converted to (arene)Cr(CO)(2)[P(2-L'-pyrrolyl)(pyrrolyl)(2)P) complexes. The substituents L'are proposed to provide temporary coordination to the Cr and to lower the barrier to arene exchange. The series was evaluated where the arene in the complex (departing) is benzene, fluorobenzene, toluene, o-xylene, m-xylene, or p-xylene and the incoming arene is C(6)D(6), chlorobenzene-d(5), anisole-d(8), fluorobenzene-d(5), toluene-d(8), o-xylene-d(10), m-xylene-d(10), p-xylene-d(10), or mesitylene-d(12). Most of the new complexes showed a significant increase in the rate of arene exchange due to the side chain unit L'. The strongest effects were seen with the examples where X = -CO(2)Me, -CONMe(2), and -(2-pyridinyl), allowing exchange with a half lifetime as low as 8 h/22 degrees C.     

基于吡咯骨架的不对称傅克反应研究进展

手性吡咯化合物是一类重要的五元含氮杂环化合物,广泛存在于众多有生物活性的天然产物中.利用不对称傅克反应合成手性吡咯化合物一直是有机合成的研究热点之一.利用手性有机小分子和手性金属催化剂是实现不对称合成手性吡咯化合物最为常见的方法.根据催化剂的分类,我们就近十几年来基于吡咯结构单元的不对称傅克反应的研究进展进行简要阐述.     

A convenient approach to the synthesis of 2-(2-aminoethyl)pyrroles and their heterocyclization into hydrogenated pyrrolopyridines and related pyrroloindolizines

2-(2-Aminoethyl)pyrroles and 2-(2-succinimidoethyl)pyrroles were prepared from acetals of ethyl 4-oxoalkanoates via latent vinyl 1,4-dicarbonyl compounds as the key intermediates. The Pictet-Spengler condensation of 2-(2-aminoethyl)pyrroles with aromatic aldehydes gave 4,5,6,7-tetrahydro-1H-pyrrolo[3,2-c]pyridines in good yields. 4,5,7,8,9,9a-Hexahydro-3H-pyrrolo[2,3-g]indolizines were prepared in a similar way starting from 2-(2-succinimidoethyl)pyrroles.