Intramolecular hydroamination of aminoalkenes catalyzed by a cationic zirconium complex

A new cationic [N(-)O(-)S]zirconium complex (cat.) was developed to be an excellent catalyst for the intramolecular hydroamination of aminoalkenes with a large substrate scope from terminal alkenes to internal alkenes, and primary amines to secondary amines. The catalyst system can also tolerate various functional groups and perform sequential hydroamination of primary aminodienes.     

A highly chemoselective Boc protection of amines using sulfonic-acid-functionalized silica as an efficient heterogeneous recyclable catalyst

A facile and versatile method for the chemoselective Boc protection of amines has been developed by a treatment with (Boc)₂O in the presence of sulfonic-acid-functionalized silica as a catalyst. The method is general for the preparation of N-Boc derivatives of aliphatic (acyclic and cyclic), aromatic, and heteroaromatic amines; primary and secondary amines; aminols, amino-esters; and sulfonamides. The catalyst works under heterogeneous conditions and can be recycled.     

高活性Ni/HY催化剂加氢催化合成苯胺类化合物的研究

采用浸渍沉淀法制备Ni/HY催化剂,用BET、XRD、TEM、TPR等方法对其进行表征,并将其应用于硝基化合物液相加氢合成苯胺类化合物反应中.结果表明,Ni/HY催化剂具有较高的催化活性,在温和的反应条件下,反应0.5 h后,硝基化合物的转化率和苯胺类化合物的选择性均高达99.0%以上.该催化剂能储存于150℃以下的空气气氛中,活性组分分散度高,且具有良好的磁分离性能.     

Primary Amines by Transfer Hydrogenative Reductive Amination of Ketones by Using Cyclometalated IrIII Catalysts

Cyclometalated iridium complexes are found to be versatile catalysts for the direct reductive amination (DRA) of carbonyls to give primary amines under transfer‐hydrogenation conditions with ammonium formate as both the nitrogen and hydrogen source. These complexes are easy to synthesise and their ligands can be easily tuned. The activity and chemoselectivity of the catalyst towards primary amines is excellent, with a substrate to catalyst ratio (S/C) of 1000 being feasible. Both aromatic and aliphatic primary amines were obtained in high yields. Moreover, a first example of homogeneously catalysed transfer‐hydrogenative DRA has been realised for β‐keto ethers, leading to the corresponding β‐amino ethers. In addition, non‐natural α‐amino acids could also be obtained in excellent yields with this method.     

Chromium-Catalyzed Alkylation of Amines by Alcohols

The alkylation of amines by alcohols is a broadly applicable, sustainable, and selective method for the synthesis of alkyl amines, which are important bulk and fine chemicals, pharmaceuticals, and agrochemicals. We show that Cr complexes can catalyze this C−N bond formation reaction. We synthesized and isolated 35 examples of alkylated amines, including 13 previously undisclosed products, and the use of amino alcohols as alkylating agents was demonstrated. The catalyst tolerates numerous functional groups, including hydrogenation-sensitive examples. Compared to many other alcohol-based amine alkylation methods, where a stoichiometric amount of base is required, our Cr-based catalyst system gives yields higher than 90 % for various alkyl amines with a catalytic amount of base. Our study indicates that Cr complexes can catalyze borrowing hydrogen or hydrogen autotransfer reactions and could thus be an alternative to Fe, Co, and Mn, or noble metals in (de)hydrogenation catalysis.     

Chemoselective hydrogenation of nitriles to primary amines catalyzed by water‐soluble transition metal catalysts

The water‐soluble rhodium complex generated in situ from [Rh (COD)Cl]₂ in aqueous ammonia has been revealed as a highly efficient catalyst for the hydrogenation of aromatic nitriles, to primary amines with excellent yields. The catalyst is also highly selective towards primary amines in the case of sterically hindered aliphatic nitriles. The catalytic system can also be recycled and re‐used with no significant loss of activity.     

Enantioselective synthesis of cyclic secondary amines through Mo-catalyzed asymmetric ring-closing metathesis (ARCM)

Carbocyclic amines are synthesized efficiently in up to 93% ee by asymmetric ring-closing metathesis (ARCM) with 2-5 mol % chiral Mo complexes. An example is provided where the catalyst is prepared in situ (catalyst isolation not needed) to afford secondary amines that cannot be prepared by alternative methods. [reaction: see text]     

Chromium‐Catalyzed Alkylation of Amines by Alcohols

The alkylation of amines by alcohols is a broadly applicable, sustainable, and selective method for the synthesis of alkyl amines, which are important bulk and fine chemicals, pharmaceuticals, and agrochemicals. We show that Cr complexes can catalyze this C?N bond formation reaction. We synthesized and isolated 35 examples of alkylated amines, including 13 previously undisclosed products, and the use of amino alcohols as alkylating agents was demonstrated. The catalyst tolerates numerous functional groups, including hydrogenation‐sensitive examples. Compared to many other alcohol‐based amine alkylation methods, where a stoichiometric amount of base is required, our Cr‐based catalyst system gives yields higher than 90 % for various alkyl amines with a catalytic amount of base. Our study indicates that Cr complexes can catalyze borrowing hydrogen or hydrogen autotransfer reactions and could thus be an alternative to Fe, Co, and Mn, or noble metals in (de)hydrogenation catalysis.     

Utilisation de techniques d'amination réductrice pour la synthèse d'amino-sucres de différents types. Communication préliminaire

Synthesis of amino-sugars using reductive amination reactions. Preliminary communication Treatment of aldehydo- or keto-sugars with primary or secondary amines and hydrogen in the presence of a catalyst (Pd/C) gave with good to excellent yields (67–96%) the expected secondary or tertiary amines. Primary amines can be obtained by using benzylamine, a hydrogenolysis taking place during the reaction.     

Toward De Novo Catalyst Discovery: Fast Identification of New Catalyst Candidates for Alcohol-Mediated Morita–Baylis–Hillman Reactions**

Recently we have demonstrated how a genetic algorithm (GA) starting from random tertiary amines can be used to discover a new and efficient catalyst for the alcohol-mediated Morita–Baylis–Hillman (MBH) reaction. In particular, the discovered catalyst was shown experimentally to be eight times more active than DABCO, commonly used to catalyze the MBH reaction. This represents a breakthrough in using generative models for catalyst optimization. However, the GA procedure, and hence discovery, relied on two important pieces of information; 1) the knowledge that tertiary amines catalyze the reaction and 2) the mechanism and reaction profile for the catalyzed reaction, in particular the transition state structure of the rate-determining step. Thus, truly de novo catalyst discovery must include these steps. Here we present such a method for discovering catalyst candidates for a specific reaction while simultaneously proposing a mechanism for the catalyzed reaction. We show that tertiary amines and phosphines are potential catalysts for the MBH reaction by screening 11 molecular templates representing common functional groups. The method relies on an automated reaction discovery workflow using meta-dynamics calculations. Combining this method for catalyst candidate discovery with our GA-based catalyst optimization method results in an algorithm for truly de novo catalyst discovery.     

Highly Efficient Dehydrogenative Coupling of Hydrosilanes with Amines or Amides Using Supported Gold Nanoparticles

Hydroxyapatite‐supported gold nanoparticles (Au/HAP) can act as a highly active and reusable catalyst for the coupling of hydrosilanes with amines under mild conditions. Various silylamines can be selectively obtained from diverse combinations of equimolar amounts of hydrosilanes with amines including less reactive bulky hydrosilanes. This study also highlights the applicability of Au/HAP to the selective synthesis of silylamides through the coupling of hydrosilanes with amides, demonstrating the first example of an efficient heterogeneous catalyst. Moreover, Au/HAP shows high reusability and applicability for gram‐scale synthesis.     

常压下电化学催化羰化直接合成异氰酸酯

近 2 0多年来 ,异氰酸酯的非光气合成方法一直受到人们的关注 [1] .采用 CO与硝基化合物羰化直接合成相应的异氰酸酯在理论上完全可行 [2 ] ,但由于异氰酸酯本身在所采用的高温、高压反应条件下很不稳定 ,实际产率很低 ,CO在醇存在下与硝基化合物催化还原羰化 [3 ,4 ] ,或与有机胺在氧气存在下催化氧化羰化 [5,6] 生成相应的化学性质较稳定的氨基甲酸酯 ,再将氨基甲酸酯通过高温热裂解生成异氰酸酯[7,8] .该反应在高温、高压下进行 ,条件较苛刻 ,因此探索在较温和的条件下实现直接合成异氰酸酯的途径是目前该领域中很具有挑战性的研究课题…     

Mild and Efficient Method for Synthesis of Eaminones Using Ytterbium Triflate as Catalyst

A mild and efficient procedure for synthesis of β-enaminones by the condensation of β-dicarbonyl compounds and amines using ytterbium triflate [Yb(OTf)₃] as catalyst is described. The catalyst can be easily recovered and reused without loss of activity.     

Synthesis of nearly enantiopure allylic amines by aza-Claisen rearrangement of Z-configured allylic trifluoroacetimidates catalyzed by highly active ferrocenylbispalladacycles

The development of the first highly active enantioselective catalyst for the aza-Claisen rearrangement of Z-configured allylic trifluoroacetimidates generating valuable almost enantiopure protected allylic amines is described. Usually Z-configured allylic imidates react significantly slower than their E-configured counterparts, but in the present study the opposite effect was observed. Z-Configured olefins have the principal practical advantage that a geometrically pure C=C double bond can be readily obtained, for example, by semihydrogenations of alkynes. Our catalyst, a C(2)-symmetric planar chiral bispalladacycle complex, is rapidly prepared from ferrocene in four simple steps. Key step of this protocol is an unprecedented highly diastereoselective biscyclopalladation providing dimeric macrocyclic complexes of fascinating structure. In the present study as little as 0.1 mol % of catalyst precursor were sufficient for most of the alkyl substituted substrates to give in general almost quantitative yields. NMR investigations revealed a monomeric structure for the active catalyst species. The bispalladacycle can also be used for the formation of almost enantiomerically pure allylic amines (ee > or =96 %) substituted with important functional groups such as ester, ketone, ether, silyl ether, acetal or protected amino moieties providing high-added-value allylic amine building blocks in excellent yield (> or =94 %). The preparative advantages should render this methodology highly appealing as a practical and valuable tool for the formation of allylic amines in target oriented synthesis.     

Rice husk: Introduction of a green,cheap and reusable catalyst for the protection of alcohols,phenols, amines and thiols

A mild, efficient and eco-friendly protocol for the chemoselective protection of benzylic and primary and less hindered secondary aliphatic alcohols and phenols as trimethylsilyl ethers and different types of amines as N-tert-butylcarbamates is developed using rice husk (RiH) as the catalyst. This reagent is also able to catalyze the acetylation of alcohols, phenols, thiols and amines with acetic anhydride. Easy work-up, relatively short reaction times, excellent yields and low cost, availability and reusability of the catalyst are the striking features of this methodology, which can be considered to be one of the best and general methods for the protection of alcohols, phenols, thiols and amines. In addition, the use of a green reagent in the above-mentioned reactions results in a reduction of environmental pollution and of the cost of the applied methods.     

Intermolecular Hydroamination of Alkynes Catalyzed by Dimethyltitanocene

A completely new application of dimethyltitanocene as catalyst for the intermolecular hydroamination of alkynes is presented. With this inexpensive and readily available catalyst, alkynes can be easily converted into imines, amines, and ketones (see reaction scheme).     

General Reductive Amination of Aldehydes and Ketones with Amines and Nitroaromatics under H2 by Recyclable Iridium Catalysts

Heterogeneous iridium catalysts were prepared and applied for the reductive amination of aldehydes and ketones with nitroaromatics and amines using H₂ . The iridium catalysts were prepared by pyrolysis of ionic liquid 1‐methyl‐3‐cyanomethylimidazoulium chloride ([MCNI ]Cl) with iridium chloride (IrCl₃ ) in activated carbons. Iridium particles were well dispersed and stable in the N‐doped carbon materials from [MCNI ]Cl with activated carbon. The Ir@NC (600‐2h) catalyst was found to be highly active and selective for the reductive amination of aldehydes and ketones using H₂ and a variety of nitrobenzenes and amines were selectively converted into the corresponding secondary and tertiary amines. The Ir@NC (600‐2h) catalyst can be reusable several times without evident deactivation.     

Molecular iodine in isopropenyl acetate (IPA): a highly efficient catalyst for the acetylation of alcohols, amines and phenols under solvent free conditions

Iodine in isopropenyl acetate (IPA) is a highly efficient catalyst for the acetylation of a variety of alcohols, phenols and amines under solvent free conditions. Primary, secondary, tertiary alcohols, amines and mono to polyhydroxy phenols and anilines with electron donating or withdrawing substituents can be easily acetylated in good to excellent yield at 85-90 °C.     

The ruthenium-catalyzed reduction and reductive N-alkylation of secondary amides with hydrosilanes: practical synthesis of secondary and tertiary amines by judicious choice of hydrosilanes

A triruthenium cluster, (mu3,eta2,eta3,eta5-acenaphthylene)Ru3(CO)7 (1) catalyzes the reaction of secondary amides with hydrosilanes, yielding a mixture of secondary amines, tertiary amines, and silyl enamines. Production of secondary amines with complete selectivity is achieved by the use of higher concentration of the catalyst (3 mol %) and the use of bifunctional hydrosilanes such as 1,1,3,3-tetramethyldisiloxane. Acidic workup of the reaction mixture affords the corresponding ammonium salts, which can be treated with a base, providing a facile method for isolation of secondary amines with high purity. In contrast, tertiary amines are formed with high selectivity by using lower concentration of the catalyst (1 mol %) and polymeric hydrosiloxanes (PMHS) as reducing agent. Reduction with PMHS encapsulates the ruthenium catalyst and organic byproducts to the insoluble silicone resin. The two reaction manifolds are applicable to various secondary amides and are practical in that the procedures provide the desired secondary or tertiary amine as a single product. The product contaminated with only minimal amounts of ruthenium and silicon residues. On the basis of the products and observed side products as well as NMR studies a mechanistic scenario for the reaction is also described.     

Magnetic nanoparticle supported polyoxometalates (POMs) via non-covalent interaction: reusable acid catalysts and catalyst supports for chiral amines

Magnetic polyoxometalates (POMs) are obtained by a simple sonication between functionalized magnetic nanoparticles and polyoxometalates. This material can be used not only as a highly active acid catalyst, but also as a catalyst support for chiral amines.