西安应用光学研究所在ISO标准制定领域取得重大突破

<正>2016年10月10日,在罗马尼亚布加勒斯特召开了ISO/TC172SC3国际标准技术讨论会,来自中国、德国SCHOTT、日本NIKON、美国NIST等世界著名的光学材料制造商、用户和计量机构参加了此次会议,并对中国代表编写的3项ISO标准"test method for striae in infrared optical materials"、"test method for homogeneity of infrared optical materials"、"test method for impurities in infrared optical ma-     

Broadband Infrared Luminescence of Bismuth-Doped Borosilicate Glasses

We prepare bismuth-doped borosilicate glasses and the luminescence properties in infrared wavelength region are investigated. Transmission spectrum, fluorescence spectrum and fluorescence decay curve are measured. The glasses exhibit a broad infrared luminescence peaking at 1340nm with the full width at half maximum of about 205 nm, and lifetime of 273us when excited by an 808-nm laser diode. The glasses are promising materials for broadband optical amplifiers and tunable lasers.     

Using modified Mach-Zehnder interferometer to get better nonlinear correction term of an isotropic nonlinear material

Nonlinear materials have been well established as photo refractive switching material. Important applica- tions of isotropic nonlinear materials are seen in self-focusing, defocusing phenomena, switching systems, etc. The nonlinear correction term is basically responsible for the optical switches. Mach-Zehnder inter- ferometer （MZI） is a well-known arrangement for determining the above correction term, but there are some major problems for finding out the term by MZI. We propose a new method of finding the nonlinear correction term as well as the second order nonlinear susceptibility of the materials by using a modified MZI system. This method may be used to find out the above parameters for any unknown nonlinear material.     

Structural properties of a-SiO_x:H films studied by an improved infrared-transmission analysis method

An improved method of fitting point-by-point is proposed to determine the absorption coefficient from infrared(IR)transmittance. With no necessity of empirical correction factors, the absorption coefficient can be accurately determined for the films with thin thicknesses. Based on this method, the structural properties of the hydrogenated amorphous silicon oxide materials(a-SiOx:H) are investigated. The oxygen-concentration-dependent variation of the Si–O–Si and the Si–H related modes in a-SiOx:H materials is discussed in detail.     

A new method of binary addition scheme with massive use of non-linear material based system

The limitations in electronics in arithmetic, algebraic & logic processing are well known. Very high speed performance (above GHz) are not expected at all in conventional electronic mechanism. To achieve high speed performance we may think on the introduction of optics instead of electronics for information, processing and computing. Non-linear optical material is a successful candidate in this regard to play a major role in the optically controlled switching systems and therefore in all-optical parallel computation these materials can show a very good potential aspect. In this paper, we have proposed a new method of an optical half adder as well as full adder circuit for binary addition using non-linear and linear optical materials.     

Wavefront measurement of a multilens optical system based on phase measuring deflectometry

Usually,a multilens optical system is composed of multiple undetectable sublenses.Wavefront of a multilens optical system cannot be measured when classical transmitted phase measuring deflectometry[PMD) is used.In this study,a wavefront measuring method for an optical system with multiple optics is presented based on PMD.A paraxial plane is used to represent the test multilens optical system.We introduce the calibration strategy and mathematical deduction of gradient equations.Systematic errors ...     

Physical Properties of Novel Lead-Bismuthate Glasses with Large Transmitting Windows

Novel lead-bismuthate glasses with low OH concentration have been obtained in the Bi2O3-PbO-SrO system. The role of the different components in the glass formation has been explored from the density, refractive index measurements, indicating that the physical properties are mainly agected by Bi2O3 and PbO contents. The densities and refractive indices of these glasses are in the ranges of 7.639-7.699 g/cm^3 and 2.47-2.94, respectively. A wide transmitting window from visible to infrared (IR) regions and good thermal stability for some compositions of these g/asses have been observed, which make them appealing candidates for different optical applications suc has upconverting phosphors, new laser materials, optical waveguides and crystal-free fibre drawing.     

Generation of few-cycle radially-polarized infrared pulses in a gas-filled hollow-core fiber

We perform a numerical study for temporally compressing radially-polarized(RP) infrared pulses in a gas-filled hollow-core fiber(HCF). The dynamic transmission and nonlinear compression of RP pulses centered at wavelengths of0.8 m, 1.8 m, 3.1 m, and 5.0 m in HCFs are simulated. By comparing the propagation of pulses with the same optical cycles and intensity, we find that under proper conditions these pulses can be compressed down to 2–3 cycles. In the transverse direction, the spatiotemporal beam profile ameliorates from 0.8-m to 1.8-m and 3.1-m pulses before the appearance of high-order dispersion. These results show an alternative method of scaling generation for delivering RP infrared pulses in gas-filled HCFs, which can obtain energetic few-cycle pulses, and will be beneficial for relevant researches in the infrared scope.     

Theoretical analysis of stack gas emission velocity measurement by optical scintillation

Theoretical analysis for an online measurement of the stack gas flow velocity based on the optical scintillation method with a structure of two parallel optical paths is performed. The causes of optical scintillation in a stack are first introduced. Then, the principle of flow velocity measurement and its mathematical expression based on cross correlation of the optical scintillation are presented. The field test results show that the flow velocity measured by the proposed technique in this article is consistent with the value tested by the Pitot tube. It verifies the effectiveness of this method. Finally, by use of the structure function of logarithmic light intensity fluctuations, the theoretical explanation of optical scintillation spec- tral characteristic in low frequency is given. The analysis of the optical scintillation spectrum provides the basis for the measurement of the stack gas flow velocity and particle concentration simultaneously.     

Proton Inelastic Mean Free Path in a Group of Organic Materials in 0.05-10MeV Range

Inelastic mean free paths （MFPs） of 0.05-10 MeV protons in a group of 10 organic compounds are systematically calculated. The calculations are based on the method newly derived from the Ashley optical-data model and from the higher-order correction terms in stopping power calculations. Especially, in this method the new and empirical Bloch correction for the inelastic MFP is given. An evaluation for the optical energy loss function is incorporated into the present calculations because of the lack of available experimental optical data for the considered organic compounds expect for kapton. The proton inelastic MFPs for these 10 organic compounds in the energy range from 0.05 to 10 MeV are presented here for the first time, and the combination of these inelastic MFP data and our previous data of stopping power calculation for these bioorganic compounds may form a useful database for Monte Carlo track-structure studies of various radiation effects on these materials.     

Modulation of the second-harmonic generation in MoS_2 by graphene covering

Nonlinear optical frequency mixing,which describes new frequencies generation by exciting nonlinear materials with intense light field,has drawn vast interests in the field of photonic devices,material characterization,and optical imaging.Investigating and manipulating the nonlinear optical response of target materials lead us to reveal hidden physics and develop applications in optical devices.Here,we report the realization of facile manipulation of nonlinear optical responses in the example system of MoS₂ monolayer by van der Waals interfacial engineering.We found that,the interfacing of monolayer graphene will weaken the exciton oscillator strength in MoS₂ monolayer and correspondingly suppress the second harmonic generation(SHG)intensity to 30%under band-gap resonance excitation.While with off-resonance excitation,the SHG intensity would enhance up to 130%,which is conjectured to be induced by the interlayer excitation between MoS₂ and graphene.Our investigation provides an effective method for controlling nonlinear optical properties of two-dimensional materials and therefore facilitates their future applications in optoelectronic and photonic devices.     

Manufacturing and testing of a cubic SiC surface

The free surface and unrotational-symmetric surface optical elements have been applied more and more widely along with the development of optical design technology, although they are still difficult for manufacturing. In this letter, a SiC unrotational-symmetric aspheric surface whose surface equation is z =- 3λ（x^a ＋ y^3） （λ= 0.6328μm） has been introduced. The tilt abstraction is adopted to minimize the material removal. The surface figures are peak-to-valley （PV） value of 0.327A and root-mean-square （RMS） value of 0.023A. A non-null testing method based on digital mask is proposed to test this surface. The accuracy of the method is testified by the experiment of standard sphere testing.     

Electronic Stopping Power for 0.05--10MeV Protons in a Group of Organic Materials

Electronic stopping powers for 0. 05-10 MeV protons in a group of organic materials are systematically calculated. The calculations are based on Ashley＇s dielectric model, and an evaluation approach of optical energy loss function is incorporated into Ashley＇s model because no experimental optical data are available for most of the organic materials under consideration. The Barkas-effect correction and Bloch correction are included. The proton stopping powers for the considered organic materials except for mylar in the energy range from 0.05 to 10 MeV are presented for the first time. The results may be useful for studies of various radiation effects in these materials and for space research.     

Optical Performance and Nonlinear Scattering of Soluble Polystyrene Grafted Multi-Walled Carbon Nanotubes

Three soluble polystyrene grafted multi-walled carbon nanotube （MWNT） samples are synthesized, and their optical performance and nonlinear scattering properties are investigated by z-scan method using nanosecond pulses of 532 nm from a frequency-doubled Q-switched Nd： YLF laser. Analysis of the experimental results shows that other than nonlinear scattering, nonlinear absorption plays a major role in optical limiting performance of these stable and well-dispersed suspensions. These new synthesized materials which can be better dispersed in common organic solvents than MWNT itself can be considered as potential sources for further optical applications.     

Optical Constants of SiO2 Films Deposited on Si Substrates

SiO2 films were deposited on single-crystalline silicon substrates by ion beam sputtering technology. Optical constants of SiO2 films are calculated from spectroscopic ellipsometry data, transmittance spectra and reflectance spectra by WVASE32 software, and the best fitted method is oStained for calculating optical constants of dielectric materials in the ultraviolet-visible-infrared （UV-VIS-IR） range. In the UV-VIS-NIR spectral range, refractive indices of SiO2 films are calculated separately by both ellipsometry data and reflectance spectra, and the obtained results are almost the same. Complex dielectric functions of SiO2films in the IR spectral range are accurately calculated with infrared transmission spectra using the GenOsc model. The obtained accuracy complex refractive index of SiO2 films in the wavelength region from 0.19μm to 25 #m is of great importance for the design of high quality coatings, such as ultra-low loss coating.     

Estimation of measuring uncertainty for optical micro-coordinate measuring machine

Based on the evaluation principle of the measuring uncertainty of the traditional coordinate measuring machine (CMM), the analysis and evaluation of the measuring uncertainty for optical micro-CMM have been made. Optical micro-CMM is an integrated measuring system with optical, mechanical, and electronic components, which may influence the measuring uncertainty of the optical micro-CMM. If the influence of laser speckle is taken into account, its longitudinal measuring uncertainty is 2.0 μm, otherwise it is 0.88 μm. It is proved that the estimation of the synthetic uncertainty for optical micro-CMM is correct and reliable by measuring the standard reference materials and simulating the influence of the diameter of laser beam. With Heisenberg's uncertainty principle and quantum mechanics theory, a method for improving the measuring accuracy of optical micro-CMM through adding a diaphragm in the receiving terminal of the light path was proposed, and the measuring results are verified by experiments.     

Geometric phase opens new frontiers in nonlinear frequency conversion of light

Narrow-bandgap materials possess the intriguing optical-electric properties and unique structures,which can be widely applied in the field of photonics,energy optoelectronic sensing and biomedicine,etc.Nowadays,the researches on nonlinear optical properties of narrow-bandgap materials have attracted extensive attention worldwide.In this paper,we review the progress of narrow-bandgap materials from many aspects,such as background,nonlinear optical properties,energy band structure,methods of preparation,and applications.These materials have obvious nonlinear optical characteristics and the interaction with the short pulse laser excitation shows the extremely strong nonlinear absorption characteristics,which leads to the optical limiting or saturable absorption related to Pauli blocking and excited state absorption.Especially,some of these novel narrow-bandgap materials have been utilized for the generation of ultrashort pulse that covers the range from the visible to mid-infrared wavelength regions.Hence,the study on these materials paves a new way for the advancement of optoelctronics devices.     

A Sensitivity Test of Extracting the Optical Potential Parameters for 6He＋209Bi from the Transfer Reaction 208pb（7Li,6He）209Bi

Recently, an indirect method has been proposed to study the optical model potential of exotic nuclear systems by fitting the transfer reaction angular distribution. The sensitivity test of this transfer method is performed with 2~8 pb（T Li,6 He）2~9 Bi as an example, by varying the potential parameters individually. The results indicate that, except for the ambiguity in the real potential depth V, other optical potential parameters of 6He＋209Bi as well as the structural information of the reactions can be extracted reliably, Moreover, the radius parameter of the bound state, rbound, is an extraordinarily sensitive parameter, which should be taken care of in the calculation procedure. The present work provides a theoretical reference for the application of the transfer method.     

Optical properties of hexagonal boron nitride thin films deposited by radio frequency bias magnetron sputtering

The optical properties of hexagonal boron nitride (h-BN) thin films were studied in this paper. The films were characterized by Fourier transform infrared spectroscopy, UV--visible transmittance and reflection spectra. h-BN thin films with a wide optical band gap E_g (5.86 eV for the as-deposited film and 5.97 eV for the annealed film) approaching h-BN single crystal were successfully prepared by radio frequency (RF) bias magnetron sputtering and post-deposition annealing at 970~K. The optical absorption behaviour of h-BN films accords with the typical optical absorption characteristics of amorphous materials when fitting is made by the Urbach tail model. The annealed film shows satisfactory structure stability. However, high temperature still has a significant effect on the optical absorption properties, refractive index n, and optical conductivity σ of h-BN thin films. The blue-shift of the optical absorption edge and the increase of E_g probably result from stress relaxation in the film under high temperatures. In addition, it is found that the refractive index clearly exhibits different trends in the visible and ultraviolet regions. Previous calculational results of optical conductivity of h-BN films are confirmed in our experimental results.     

Optoelectronic Properties,Elastic Moduli and Thermoelectricity of SrAlGa： An Ab Initio Study

Half-Heusler compounds are an impressive class of materials with a huge potential for different applications such as in future energy, especially in the fields of thermoelectrics and solar cells. We present ab fnitio total energy calculations within the modified Becke-Johnson generalized gradient approximation （mBJ-GGA） to obtain the physical properties of SrAlGa compounds. The structural, elastic, acoustic, electronic, chemical bonding, optical, and thermoelectric properties are calculated and compared with the available calculation data. The SrAlGa is found to be a small-band-gap （0.125-0.175 eV） material, suitable for thermoelectric applications with a relatively high Seebeck coefficient. Also, SrAIGa has the potential in the optoelectronic applications due to high optical conductivity and reflectivity in the infrared and visible region of electromagnetic spectra.