meso-Indanyl calix[4]pyrrole receptors

Two new meso-indanyl-substituted calix[4]pyrrole receptors, 2 and 3, have been synthesized. A range of calix[4]pyrrole host-neutral molecule complexes crystallise from solutions of 2 in a variety of solvents and the structures of four have been elucidated by X-ray crystallography. The F⁻ and Cl⁻ anion affinities of 2 have been measured in acetonitrile, and are significantly different from the corresponding affinities of the prototypical calix[4]pyrrole, the octamethyl-derivative, 1. ESI-FTICR-MS has been used to determine the relative F⁻ and Cl⁻ anion affinities of receptors 1 and 2 in methanol-acetonitrile solution. Deprotonation of 1 and 2 by fluoride is observed (under the conditions of the MS experiment).     

New redox anion receptors based on calix[4]pyrrole bearing ferrocene amide

Two redox anion receptors based on calix[4]pyrrole and ferrocene have been synthesized. The electrochemical investigation revealed that these compounds can be response to the anions with different shifts of Fc/Fc⁺ couple. With the ¹H NMR titration study, the selectivity to F⁻ and AcO⁻ ions in CD₃CN solution was confirmed. The conformations of the mono-aromatic meso-substituted calix[4]pyrroles, which were the synthetical intermediate of the ferrocene based receptors, and their anion complexes in the solid state have also been studied by single X-ray crystallography, and the rationality of the crystal conformations was proved by theoretical study.     

A sandwich anion receptor by a BODIPY dye bearing two calix[4]pyrrole units

A novel dicalix[4]pyrrolyl-substituted 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dye I with an absorption peak at approximately 670 nm and an emission peak at about 690 nm was prepared. As an anion receptor, I displayed a red shift in absorption spectra and fluorescence quenching in varying degrees in the presence of F⁻, AcO⁻, H₂PO₄⁻, or Cl⁻. Compared with the parent calix[4]pyrrole, a representative anion receptor, I exhibited a stronger affinity to these anions due to the formation of a sandwich complex through multiple hydrogen-bonding interactions.     

Squaramide-substituted calix[4]pyrrole: Synthesis and ion binding studies

Squaramide-substituted calix[4]pyrrole 2 was synthesized and its anion-binding properties were investigated. On the basis of UV spectroscopy, ¹H NMR spectroscopic and computational DFT model analyses, compared with the parent calix[4]pyrrole 1, compound 2 shows significantly enhanced binding affinities for anions in CH₂Cl₂, and it was concluded that this increase in affinity is ascribed to participation of the squaramide unit in anion binding.     

A photoswitchable strapped calix[4]pyrrole receptor: highly effective chloride binding and release

A stiff-stilbene strapped calix[4]pyrrole receptor can be reversibly switched by light between a strong chloride-binding Z-isomer and a very weakly binding E-isomer. The light-induced switching process is monitored by UV-Vis and ¹H NMR spectroscopy and chloride binding is studied in detail using both ¹H NMR and ITC titrations in DMSO and MeCN. In DMSO, at millimolar concentrations, switching from a fully bound to an almost fully unbound state can be triggered. Quantification of the binding constants in MeCN reveals an extraordinary 8000-fold affinity difference between the Z- and E-isomer. Single crystal X-ray crystallographic analysis gives insight into the structure of the photogenerated E-isomer and the geometry of the chloride-bound receptors is optimized by DFT calculations. The highly effective control of binding affinity demonstrated in this work opens up new prospects for on demand binding and release in extractions and photocontrol of membrane transport processes, among other applications.

A reconfigurable calix[4]pyrrole receptor containing a stiff-stilbene strap can be switched by light between a strong and weak binding form, showing an 8000-fold affinity difference for chloride.     

A colorimetric tetrathiafulvalene-calix[4]pyrrole anion sensor

The interaction and colorimetric sensing properties of a tetrathiafulvalene substituted calix[4]pyrrole sensor with anions were investigated using ¹H NMR and absorption spectroscopic techniques. Visual color changes were observed upon addition of different anions (Cl⁻, Br⁻, CN⁻, and AcO⁻) to a solution of the sensor.     

Study on thermal decomposition of calix[6]arene and calix[8]arene

Thermal decomposition kinetics of calix[6]arene (C6) and calix[8]arene (C8) were studied by Thermogravimetry analysis (TG) and Differential thermal analysis (DTA). TG was done under static air atmosphere with dynamic heating rates of 1.0, 2.5, 5.0, and 10.0 K min⁻¹. Model-free methods such as Friedman and Ozawa–Flynn–Wall were used to evaluate the kinetic parameters such as activation energy (E _a) and pre-exponential factors (ln A). Model-fitting method such as linear regression was used for the evaluation of optimum kinetic triplets. The kinetic parameters obtained are comparable with both the model-free and model-fitting methods. Within the tested models, the thermal decomposition of C6 and C8 are best described by a three dimensional Jander’s type diffusion. The antioxidant efficiency of C6 and C8 was tested for the decomposition of polypropylene (PP).     

Anion-dependent binding of zinc calix[4]pyrrole-bisporphyrinate triethylenediamine

The complexation properties of zinc 10,20-bis[5-(2,3,7,8,12,13,17,18-octaethylporphyrinate)ethynylphenyl]-5,5′,10′,15,15′,20′-hexamethylcalix[4]pyrrole toward halide ions, triethylenediamine, and 4,4′-bipyridyl were studied by spectrophotometric titration and ¹H NMR spectroscopy. The influence of binding of anions (F⁻ and Cl⁻) by the calix[4]pyrrole fragment of zinc calixpyrrole-bisporphyrinate on the complexation properties of its interporphyrin cavity toward the bidentate organic ligand triethylenediamine.     

Catalytic polymerization of ethylene by non-metallocene Zirconium(IV) calix[4] pyrrole complexes

Some zirconium compounds containing chelating diamido dipyrrole or tetra-amido tetra-pyrrole ligands were synthesized and used as polymerization catalyst with high polymerization activity of ethylene at 40 °C and 1 bar, in presence of MAO or B(C₆F₅)₃ as co-catalyst. The maximum catalytic activity reached 1100 Kg/mol bar h for ethylene polymerization by Zr₂(octa-phenyl calix[4]pyrrolidine)Cl₄. These results reveal that half-zirconocene like complexes including four terminal chlorine and one calix[4]pyrrolidine in middle with both π and σ-interaction have the highest ethylene polymerization turnover (compounds 13, 14).     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

Organic clays. Synthesis and structure of Na5[calix[4] arene sulfonate] · 12 H2O,K5[calix[4]arene sulfonate]·8 H2O,Rb5[calix[4]arene sulfonate]·5 H2O,and Cs5[calix[4] arene sulfonate] ·4 H2O

The title calixarenes all exist in the solid state as bilayers of anionic calixarenes in the cone configuration. These layers alternate with inorganic regions which contain the cations and the water molecules. The overall structures bear a close resemblance to those found for clay minerals. The sodium salt crystallizes in the triclinic space groupP witha = 10.998(6),b = 13.582(5),c = 14.472(5) Å, = 74.01(3), = 89.09(4), = 86.50(4)°, andZ = 2 forD _calc = 1.72 g cm^–3. Refinement based on 4727 observed reflections led to a conventionalR = 0.050. The potassium salt crystallizes in the triclinic space groupP witha = 11.815(9),b = 13.636(6),c = 14.040(9) Å, = 100.24(5), = 111.86(9), = 95,14(9)°, andZ = 2 forD _calc = 1.77 g cm^–3. Refinement based on 2977 observed reflections led toR = 0.15. The rubidium and cesium salts are isostructural and crystallize in the monoclinic space groupP2₁/n with parameters for Rb[Cs]a = 11.603(5) [11.704(3)],b = 28.607(8) [29.747(9)],c = 12.512(5) [12.604(4)] Å, = 91.70(4) [91.63(2)°], andZ = 4 forD _calc = 2.01 [2.24] g cm^–3. Refinement based on 1750 [4257] observed reflections led toR = 0.108 [0.075]. Disorder of the cations was observed for the rubidium and cesium salts. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82074 (95 pages).     

Synthesis of a new colorimetric receptor based on calix[4]pyrrole binding oxime for selective recognition of fluoride ions

A colorimetric anion sensor α-meso-heptaethylcalix[4]pyrrole-meso-3-aminophenyl-p-nitrobenzaldoxime was synthesised and characterised by various spectroscopic techniques. Anion-binding studies were carried out using UV–vis, and ¹H NMR titrations, revealing that the receptor exhibits selective recognition towards F^?  over other anions. The selectivity for F^?  among the halides is attributed mainly to the hydrogen bond interaction of the receptor with F^? . Receptor showed colour change from colourless to yellow in the presence of tetrabutylammonium fluoride with 1:2 stoichiometry. Cyclic voltammetry studies, carried out in CH₃CN, provided evidence of an anion-dependent electrochemical response with F^?  ion. This response was particularly dramatic in the case of receptor after the addition of ～1 equiv. of F^?  ion.     

Synthesis and extraction studies of polymeric phthalimido functionalized calix[4]arene

The article comprises synthesis and extraction studies of polymeric calix[4]arene having phthalimide groups at the lower rim. The polymeric phthalimido functionalized calix[4]arene was synthesized via radical initiated reactions involving a vinylic monomer 5,11,17,23-tetra-tert-butyl-25-[4-(acrylamido)benzyloxy]-26,28-bis-(2-phthalimido-ethoxy)-27-hydroxycalix[4]arene (5) with styrene. A five atom spacer group was incorporated between the bulky calixarene core and the acrylate moiety in order to minimize steric interactions which proved to impede the polymerization. From the liquid–liquid and solid–liquid extraction studies it has been concluded that the precursor 3 (5,11,17,23-tetra-tert-butyl-25-(4-nitro benzyloxy)-26,28-bis-(3-phthalimidoethoxy)-27-hydroxy-calix[4]arene) is selective for metal cations. The order of extractability of metal cations by the ligand 3 decreases in the sequence: Hg²⁺ > Cd²⁺ > Cu²⁺ > K⁺ > Co²⁺ whereas its polymeric derivative is selective in the sequence: Hg²⁺ > Cd²⁺ > K⁺ > Co²⁺ > Cu²⁺ for the metal cations used in the experiments.     

Synthesis and anion recognition of neutral receptors based on multiamide calix[4]arene

Two multiamide calix[4]arenes (5, 6) were synthesized and characterized by NMR, MS and elemental analysis. The binding properties of receptors with some anions (π-O₂NPhOPO₃²⁻, π-O₂NPhO⁻, H₂PO₄⁻, Ac⁻, Cl⁻, Br⁻ and I⁻) were studied by UV-Vis spectra. The results indicate that the tetraamide calix[4]arenes (5, 6) have a good selectivity to the anions containing aromatic ring (π-O₂NPhOPO₃ ²⁻, π-O₂NPhO⁻). The 1 : 1 complexes between host and guest were formed through multiple hydrogen bonding and π-π interactions. The hosts 5 and 6 also show a definite binding ability for the anions (H₂PO₄⁻, Ac⁻, Cl⁻) that have no ultraviolet absorption, which provides a simple method of spectrum detection for these anions.     

Synthesis of new calix[4]pyrrole derivatives via 1,3-dipolar cycloadditions

Octamethylcalix[4]pyrrole-2-carbaldehyde 1 and 3-(octamethylcalix[4]pyrrol-2-yl)propenal 5 were used as precursors of azomethine ylides, which were trapped in situ with a range of dipolarophiles, such as 1,4-benzoquinone, 1,4-naphthoquinone, and fumaronitrile. Aldehyde 1 showed very low reactivity but the azomethine ylide generated from the reaction of aldehyde 5 with N-methylglycine could be trapped with those dipolarophiles to afford new β-substituted octamethylcalix[4]pyrrole derivatives in moderate yields. The resulting cycloadducts show high affinity constants for fluoride and acetate anions; compounds 7 and 8 display sharp changes in color in the presence of these anions.     

Pentapyrrolic calix[4]pyrrole

A new calix[4]pyrrole has been synthesised that contains a 3,4,5-trisbromopyrrole appended to a meso-position which shows enhanced anion affinity as compared to the parent meso-octamethylcalix[4]pyrrole macrocycle.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Supramolecular complexation studies of [60]fullerene with calix[4]naphthalenes—a reinvestigation

Estimations of equilibrium or association constant (K_ASSOC) values reported by many other groups for the supramolecular complexation between [60]fullerene (‘C₆₀’) with different macrocyclic hosts, in solvents such as toluene or carbon disulfide, for example, is often conducted by UV-vis absorption and/or ¹H NMR spectroscopy. In this paper, the complexation behaviour of two calix[4]naphthalene hosts with C₆₀ in toluene and carbon disulfide has been re-examined, using both of these methods. An analysis is presented of the data newly obtained, in light of recent advances and understanding published by others of the limitations of, in particular, the absorption spectroscopic methods. The discussion presented is also intended to aid those who may be unfamiliar with the nuances and limitations of the analytic models involving C₆₀ supramolecular complexation. Also presented is a general mechanism for C₆₀ supramolecular complexation studies, which lay the groundwork for further experiments.