用一维光子带隙结构增强硫化镉双光子吸收研究

用真空镀膜方法制备了含有单个CdS缺陷层的具有不同周期和结构参量的TiO2／SiO2一维光子晶体。用抽运一探测技术研究了CdS缺陷层的双光子吸收（TPA）现象。实验结果表明：一维光子晶体中CdS缺陷层的双光子吸收显著增强。不同周期和结构参量的一维光子晶体中CdS缺陷层的双光子吸收系数不同。双光子吸收的增强来源于由光局域化导致的缺陷层的电场强度的增加。缺陷层电场强度与一维光子晶体的结构有关,如周期,光子带隙的位置与宽度及缺陷模式等因素都会影响缺陷层电场强度。采用四分之一波长的高低折射率介质层和与入射波长匹配的缺陷模可以得到最大的缺陷层电场强度。     

Defect-mode dependence of two-photon-absorption enhancement in a one-dimensional photonic bandgap structure

A one-dimensional photonic crystal containing a single CdS defect layer of various thicknesses was fabricated. The dependence of the two-photon-absorption (TPA) coefficient on the defect mode was investigated by use of a femtosecond pump-probe method. Experimental results show that the TPA coefficient of the CdS defect layer depends strongly on the defect mode in the photonic bandgap. This is consistent with the predicted dependence of light intensity within the defect layer.     

Si-based two-dimensional photonic crystals coupled to one-dimensional Bragg mirrors

Planar two-dimensional photonic crystals can be combined with a one-dimensional Bragg mirror to control the quality factor and out-of-plane coupling of optical Bloch modes. We have investigated the optical properties of such structures fabricated on silicon. The photonic crystals are fabricated in the upper Si layer deposited on top of quarter-wave thick SiO₂-polycrystalline Si layers. The optical properties are probed by the room-temperature photoluminescence of Ge/Si self-assembled islands as an internal source. We show that an enhancement of the quality factor can be obtained by controlling the thickness of the silicon upper layer in which the two-dimensional photonic crystal is etched and by controlling the air filling factor of the photonic crystal. Quality factors of 2200 around 1100 nm are obtained by this method for defect-free photonic crystals with a square lattice pattern. The experimental results are supported by three-dimensional finite-difference time-domain (FDTD) calculations of the radiated modes for the investigated structures.     

双缺陷模一维光子晶体的双光子吸收增强研究

采用真空镀膜工艺制备了具有762 nm和800 nm双缺陷模的含两个CdS缺陷层的TiO2/SiO2一维光子晶体,运用抽运探测技术测量了其双光子吸收。对于两个缺陷模,双光子吸收均得到很大的增强,其中缺陷模为800nm时的双光子吸收系数307 cm/GW要大于缺陷模为762 nm时的116 cm/GW,分别为单层CdS薄膜的48倍和18倍。这种双光子吸收的增强是由于光局域化导致一维光子晶体缺陷层内的电场强度增大而形成的。通过传输矩阵法计算了一维光子晶体的内部场强,发现800 nm波长光入射时缺陷层内的电场强度要大于762 nm波长光入射时的电场强度值。     

Omni-directional reflection bands in one-dimensional plasma dielectric photonic crystals

In this paper the omni-directional reflection bands in one-dimensional plasma photonic crystal (PPC) have been studied theoretically. We present the study of plasma photonic crystal, having alternate regions of plasma?dielectric (Al₂O₃ or ZnS). Reflectances from this periodic multilayered structure in TE- and TM-modes are calculated for different angles of incidence in microwave region for omni-directional reflection bands. The reflectance is obtained by solving a Maxwell's equation using a translational matrix method. In addition to this, we have also studied the effect of variation of plasma width as well as plasma density on the reflection properties of plasma dielectric photonic crystal in TE- and TM-modes. The study of reflectance bands of such plasma photonic crystals shows that it can be used as omni-directional reflector.     

Thermo‐tunable defect mode in one dimensional photonic structure based on grooved silicon and liquid crystal

A composite 1D photonic structure with defect was designed, fabricated by wet anisotropic etching of (110)‐oriented silicon and filled with liquid crystal. The polarized reflection spectra of the second‐order stop band with defect mode have been registered by means of FTIR microscopy. The thermo‐optical effect in the photonic structure due to phase transition in liquid crystal has been demonstrated in the spectral region of 8.5 µm. The relative shift of the defect mode peak was found experimentally to be 2.0% compared to 3.1% as predicted by calculation. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Faraday rotation in a two-dimensional photonic crystal with a magneto-optic defect

We study the magneto-optic (MO) Faraday rotation in a two-dimensional square-lattice photonic crystal with a central MO defect layer in the optical wavelength range. We show that when a TM plane wave is incident upon a photonic crystal, an enhancement of Faraday rotation takes place in a region where a resonance peak appears in the photonic bandgap. In this region the mode conversion is high.     

可见光波段SiO2/CdSe一维光子晶体及缺陷模的研究究

采用SiO2/CdSe构建了可见光波段一维光子晶体结构,并在其中引入LiTaO3缺陷层。利用传输矩阵法,分析了电磁波在无缺陷与含LiTaO3缺陷层两种光子晶体中的带隙结构,系统地研究了缺陷层参数对光子晶体可见光波段带隙结构的影响规律。计算结果表明：LiTaO3的引入,有利于带隙宽度的增加,调整缺陷层结构参数,缺陷模的位置可在不同颜色区域出现,如红光、黄光等缺陷模。该结构有望用于制作可见光波段的滤波器。     

Angular tuning of defect modes spectrum in the one-dimensional photonic crystal with liquid-crystal layer

A one-dimensional ZrO₂/SiO₂ photonic crystal with a 4-n -pentyl-4' -cyanobiphenyl (5CB) nematic defect layer was used to investigate the transmission spectra of light polarized parallel and perpendicular to the liquid-crystal director at different angles of incidence. The spectra of the photonic crystal were shown to split into four polarized components T_ij at oblique incidence. When the incident angle increased, the bandgap edges and the defect modes shifted towards short wavelengths, while the amplitudes of the defect modes increased for the transverse magnetic polarization and decreased for the transverse electric polarization. The observed discrepancy between the defect mode amplitudes in the center and near the edges of the photonic bandgap was found to be related to the radiation losses inside the defect layer of a non-ideal photonic crystal. The simulated transmission spectra obtained using recurrence relations and taking into account the decay of defect modes are in good agreement with the experimental data.     

Polarization-independent low-pass spatial filters based on one-dimensional photonic crystals containing negative-index materials

A new application of one-dimensional photonic crystals containing negative-index materials is proposed as low-pass spatial filters. Through optimizing the parameters of defect layer, a series of polarization-independent defect modes in the zero-average-index gap of the photonic crystals are obtained with the increase of the incident angle. Based on these defect modes, polarization-independent low-pass spatial filters are designed. The spatial-frequency bandwidth of the spatial filters can be adjusted by changing the period number of the defective photonic crystal structures. In addition, the effect of the losses of negative-index materials on the spatial filters is considered.     

Control of the transmission spectrum of a photonic crystal with lattice defects

The transmission spectrum of a one-dimensional photonic crystal with structural defects is investigated. An anisotropic layer of a nematic liquid crystal is considered as a defect. The possibility of effective external control of the transmission spectrum of the photonic crystal by changing either the orientational state of the defect liquid crystal layer (for example, using an electric field) or the angle of incidence of light is shown. It is established that the spectral properties of the photonic crystal change radically with a change in the optical characteristics of the defect layer in the vicinity of the temperature phase transition of the nematic liquid crystal to the isotropic state.     

Optical properties of chiral photonic crystals with an anisotropic defect layer

Properties of defect modes in chiral photonic crystals with an anisotropic defect are considered. The influence of the defect layer thickness, its location in the crystal and orientation of its optical axis, as well as of the chiral photonic crystal thickness on the properties of defect modes is studied. It is shown that at certain values of the defect layer thickness the medium loses its main property, namely, the polarization dependence of the diffraction reflection. At certain thicknesses of the defect layer this system transforms from the source of the right circular polarization into the source of the left circular polarization, if the layer position in the chiral photonic crystal changes.     

Magneto-optical activity of a one-dimensional photonic crystal with a magnetic defect

The influence of a magnetic defect on the field distribution and magneto-optical properties of a one-dimensional photonic crystal has been investigated. It has been shown that the maximum localization of the wave field in the defect layer is achieved in an asymmetric photonic crystal structure. A greater Faraday rotation, which significantly exceeds the angle of rotation of the polarization plane in an isolated magnetized layer, and a higher degree of localization of the wave field can be achieved when the magnetic layer is surrounded by layers of photonic crystal mirrors with a lower refractive index. An increase in the Faraday rotation angle is determined not only by an increase in the thickness of the magnetic defect but also by a symmetric increase in the number of periods in the photonic crystal mirrors.     

Localized electromagnetic modes and the transmission spectrum of a one-dimensional photonic crystal with lattice defects

The properties of localized electromagnetic modes in a one-dimensional photonic crystal with a structural defect layer were studied. The role of the defect was played by an anisotropic nematic liquid crystal layer. The frequency and the damping factor of defect modes were shown to substantially depend on the defect layer thickness and the orientation of the optical axis of the nematic. The transmission spectra of photonic crystals with one and two lattice defects were studied. Taking into account the special feature of nematic liquid crystals distinguishing them from usual crystals, namely, large permittivity anisotropy, it was shown that the transmission spectrum of the photonic crystal could be controlled by varying the orientation of the optical axis of the nematic, for instance, under the action of an external electric field.     

Self-assembled and fluorescence enhancement of semiconductor nanoparticles induced by surfactant adsorption

When semiconductor colloidal CdS nanoparticles and nonylphenol are mixed together in dimethyl sulfoxide at room temperature, a self-assembling process is induced. In the course, the size tunable properties of CdS nanoparticles are amplified. A blue shift in the emission spectrum and a strong photoluminescence enhancement are observed without significant change in the absorption features of the colloidal nanoparticles. These results are attributed to the adsorption of nonylphenol onto the nanoparticles surface and to the association process of the surfactant molecules. The surfactant adsorption process provides a nanoparticle surface passivation and induces an associative phase that enlarges the photoluminescence stability. This strategy opens the possibility to improve simultaneously physicochemical and photoluminescence properties of nanocrystals in solution as well as to control their deposition on two-dimensional surfaces.     

集成多通道光子晶体的设计及初步实验制备

在Fabry-Perot滤光片的基础上,通过改变双通道和通带通道光子晶体中处于不同对称中心的两种缺陷层的厚度,可使相应的通道或者通带位置进行独立的移动.通过刻蚀或者补偿,使缺陷层的厚度分别在二个维度方向上发生变化,改变入射光束与光子晶体的相对位置,即可实现通道和通带通道可调谐二维光子晶体.32个通道光子晶体的初步实验结果证明了设计方案的可行性.     

缺陷对二维四方光子晶体透射光谱的影响

利用转移矩阵法研究了二维四方光子晶体中缺陷对透射光谱的影响。结果表明缺陷对TE波的影响比对TM波的影响明显,缺陷层填充比对禁带宽度影响很大,TE波禁带在填充比r/a=0.33时最宽,第一禁带的最低频率随着填充比的增加向低频移动。     

Evolution of Luminescence with Shell's Thickness in Colloidal CdSe/CdS Core/Shell Quantum Dots

We synthesize colloidal CdSe/CdS core/shell quantum dots with different shell thicknesses, and there are five samples including CdSe core dots, and CdSe/CdS core/shell dots with 1-4 CdS layers. X-ray diffraction and Raman measurements indicate that the stress in CdSe core becomes stronger with the increasing shell thickness, and the optical measurements show that when the shell becomes thicker, the photoluminescence quantum yield is enhanced, and the radiative decay is also expedited. The temperature-dependent optical spectra are measured. The relation between the microstructure and the optical properties is discussed.     

Synthesis and photonic band gap characterization of high quality photonic crystal heterostructures

High quality photonic crystal heterostructures with a thin titania planar defect layer between its two constitutional photonic crystals were fabricated and their structural and optical properties were analyzed. The results suggest that the thin planar defect layer is beneficial to separate the two constitutional photonic crystals from each other and to reduce the roughness of the interface. The quality of the resulting photonic crystal heterostructures is improved largely and the main features of the photonic band gaps of the two constitutional photonic crystals are inherited. The predominant optical quality of these heterostructures (e.g. deep double photonic band gaps and steep photonic band edges) may afford new flexibility and functionality for engineered photonic behavior in practical devices such as late-model light-operated switches.     

一维光子晶体缺陷模激光器的放大特性

光子晶体中引入缺陷后将形成缺陷模,这些缺陷模在增益介质中将被放大形成激光。基于麦克斯韦方程和速率方程相结合的模型,用时域有限差分法(FDTD)计算和分析了一维单缺陷光子晶体激光器中缺陷模的空间分布和频谱特性,以及这些缺陷模的放大特性,主要研究了缺陷层的厚度、晶体层数对缺陷模放大特性的影响。模拟结果显示,类似于传统激光腔的腔模,这些缺陷模能够被放大,形成激光。调整缺陷层的厚度、晶体层数等结构参量,将改变缺陷模的谐振,激射频率以及空间分布,这将直接影响激射阈值和饱和特性。增加晶体的层数,激光器的阈值将降低,饱和值将增加,但晶体层数增加到一定限度时,这种增减趋势变弱。模拟结果证明了有效层数的存在。