Direct access to upper rim substituted mono- and diaryloxy calix[4]arenes via bis(spirodienone) route

A seemingly ipso-like nucleophilic substitution of the upper rim of p-tert-butylcalix[4]arene is accomplished by an indirect method involving calix[4]arene derived bis(spirodienone). This method not only provides both mono and 1,3-diaryloxy calixarenes but also enables the synthesis of upper rim monothio substituted calix[4]arenes. A modification of the methodology can be successfully extended for the selective synthesis of mono- and 1,3-diquinone calix[4]arenes having free hydroxyl groups at the lower rim, in fewer steps.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

The enhancement of luminescent properties of Tb3+ complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold

This is the first report on the synthesis and characterization of tetra-1,3-diketone derivatives of tetrthia- and calix[4]arenes substituted by acetylacetonyl or dipivaloylmethanyl moieties at the upper rim and bearing hydroxyl groups at the lower rim as ligands for Tb³⁺ complexes. The spatial structure and tautomeric content for the synthesized ligands have been determined by means of X-ray, IR and NMR spectroscopy. Comparison of the sensitizing properties of tetrathiacalix[4]arenes and their calix[4]arene analogues on the Tb³⁺-centered luminescence in DMF solutions has been performed. A substantial enhancement of the luminescent properties of Tb³⁺- complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold was established.     

Glycoside-clustering round calixarenes toward the development of multivalent ligands. Synthesis and conformational analysis of Calix[4]arene O- and C-glycoconjugates

Bis- and tetra-O- and C-glycosyl calixarenes (calixsugars) have been prepared by tethering carbohydrate moieties to a tetrapropoxycalix[4]arene scaffold through alkyl chains. Two methodologies have been employed. One consisted of the stereoselective multiple glycosylation of upper rim calix[4]arene polyols leading to calix-O-glycosides; the other involved a multiple Wittig olefination of upper rim calix[4]arene-derived polyaldehydes by the use of sugar phosphoranes and reduction of the alkene double bonds affording calix-C-glycosides. The NMR spectra and NOE experiments of bis-glycosylated products indicate that compounds bearing sugar-protected residues exist preferentially in solution in a flattened cone arrangement (far conformation) whereas deprotected derivatives adopt a close conformation. Calculations by molecular mechanics of the latter compounds point to a close conformation as well in gas phase.     

Synthesis and in vivo biological activity of large-ringed calixarenes against Mycobacterium tuberculosis

A series of large-ringed calix[6,7,8]arene analogues have been synthesised and their affect against Mycobacterium tuberculosis in vivo established. In general, when p-phenylcalixarenes and tert-butylcalixarenes were not functionalised at the lower rim, low biological activities were observed. However on going from partially to fully lower rim pegylated calixarenes the anti-mycobacterial properties improved. The addition of cyanopropoxy groups at the lower rim gave rise to low activities, whereas the addition of acetate moieties interestingly had pro-TB effects. Two upper rim sulfonated calixarenes showed promising properties. In the course of this work, a high yielding procedure to synthesise p-phenylcalix[7]arene was also established.     

Synthesis and spectroscopic studies of isosteviol-calix[4]arene and -calix[6]arene conjugates

Novel calix[4]arene derivatives functionalized with two or four isosteviol units at the upper rim and a new calix[6]arene having six isosteviol moieties at the lower rim have been synthesized. The structures of these compounds have been confirmed by NMR and mass spectrometry data. All ¹H and ¹³C NMR chemical shifts of isosteviol were fully assigned by extensive NMR spectroscopic methods, and used to clarify the structures and conformations of isosteviol-calixarene conjugates.     

The selective preparation of partial cone O-aryl calix[4]arene ethers from 1,3-dimethoxycalix[4]arene: a new platform for the preparation of non-aggregated dyes

We report a new direct route for the selective preparation of novel partial cone O-aryl ether calix[4]arenes to be used as new platforms for the preparation of non-aggregated dyes. These partial cone conformers have the aromatic substituents lying within the calix[4]arene annulus via the upper rim.     

Synthesis, structure, and properties of nitronyl nitroxyl tetraradical with calix[4]arene framework

A reaction of calix[4]arene tetraaldehyde with 2,3-bis(hydroxyamino)-2,3-dimethylbutane in DMF resulted in the corresponding 1,3-dihydroxyimidazolidine tetraadduct, whose oxidation gave a calix[4]arene (1,3-alternate) bearing four nitronyl nitroxyl-containing substituents at the upper rim.     

Upper rim substituted thiacalix[4]arenes

The synthesis and structure of new tetrahydroxythiacalix[4]arenes, existing in the cone conformation and possessing reactive bromide, chloromethyl or diorganylphosphoryl groups on the upper rim of the macrocycle are described. The molecular structure of tetrakis(diisopropoxyphosphorylmethyl)thiacalix[4]arene was examined by X-ray crystallography.     

Hydrogen bonded homo- and heterodimers of tetra urea derivatives of calix[4]arenes

Calix[4]arene ethers fixed in the cone conformation and substituted at the upper rim by various urea residues have been synthesized by reaction of the amino calix[4]arenes with isocyanates. Their dimerisation in apolar solvents has been established by the formation of mixed dimers consisting of two different urea derivatives.     

1,3-Alternate calix[4]arene nitronyl nitroxide tetraradical and diradical: synthesis, X-ray crystallography, paramagnetic NMR spectroscopy, EPR spectroscopy, and magnetic studies

Calix[4]arenes constrained to 1,3-alternate conformation and functionalized at the upper rim with four and two nitronyl nitroxides have been synthesized, and characterized by X-ray crystallography, magnetic resonance (EPR and ¹H NMR) spectroscopy, and magnetic studies. Such calix[4]arene tetraradicals and diradicals provide scaffolds for through-bond and through-space intramolecular exchange couplings.     

Electrochemical properties of outer-sphere associates of bipyridyl and sepulchrate metal complexes with (thia)calix[4]arenes

The electrochemical one-electron reduction (oxidation) of bipyridyl metal complexes ([Co(bipy)₃]³⁺, [Cr(bipy)₃]³⁺, [Fe(bipy)₃]²⁺, [Ru(bipy)₃]²⁺ (as well as Co(III) sepulcrate)) with water-soluble (thia)calix[4]arenes has been studied by means of cyclic voltammetry. It has been shown that [M(bipy)₃]^3+/2+ bind to (thia)calix[4]arenes via sulfonate groups of the upper rim. Oxidized forms bind stronger than reduced ones leading to reduction (oxidation) of half-wave cathodic shift. The effect of predominant stabilization of oxidized forms of metal complexes for carboxylated calix[4]arene is stronger than for thiacalix[4]arene (ΔΔG₀?=???7.8?÷???12.5 and ??3.7 kJ/mol, respectively). The redox-switchable outer-sphere binding of Co(III) sepulchrate via lower rim of carboxylated calix[4]arene has been revealed using cyclic voltammetry. The binding constants of outer-sphere associates based on calix[4]arenes and unstable metal complexes ([Co(sep)]²⁺, [Ru(bipy)₃]³⁺, [Co(bipy)₃]²⁺) have been calculated for the first time using ¹H NMR titration and cyclic voltammetry data.

Graphical abstract

Open image in new window

     

Induced-fit recognition by p-carboxylatocalix[4]arene hosts

Calix[4]arene derivatives bearing anionic carboxylato groups at the upper rim (p-carboxylatocalix[4]arenes) are able to ‘grab’ paraquat dicationic guest through an induced-fit mechanism, which originates from the conformational mobility of calixarene skeleton.     

Preorganized, cone-conformational calix[4]arene possessing four propylenephosphonic acids with high extraction ability and separation efficiency for trivalent rare earth elements

p-t-Octylcalix[4]arene with tetraphosphonic acid at lower rim in cone conformation has been designed and synthesized as a new extraction reagent to investigate the extraction behavior of the nine trivalent rare earth elements: La, Pr, Nd, Sm, Eu, Gd, Ho, Y, and Er. The extraction of rare earth metals with the present extractant occurs by a simple ion-exchange mechanism. The stoichiometry of the extractant to rare earth metal ion was determined to be 2:1 based on the extraction equation, half pH values, pH_1/2, and the difference in the values of the extraction equilibrium constants of nine trivalent rare earth elements and separation factors between adjacent rare earth elements. This allowed for comparison of the estimated extraction efficiency and selectivity. The present extractant exhibited extremely high extractability and sufficiently high separation efficiency of rare earth metals, compared with calix[4]arene tetraphosphonic acid at upper rim, calix[4]arene tetraacetic acid at lower rim as previously reported and the commercial extraction reagent. This results was attributed to size and multidentate effects based on the preorganized cyclic structure of calix[4]arene and to the original selectivity of functional group for heavier rare earth elements.     

Synthesis and evaluation of deep cavity imidazolyl calix[n]arenes

A series of deep cavity diphenyl imidazolyl calix[n]arenes (4, 6, 8) have been obtained from readily available starting materials through a five step synthetic methodology involving appropriate alkylation of lower rim of preformed calixarene, formylation of the upper rim and subsequent condensation with aryl diketones in the presence of ammonium acetate and glacial acetic acid. Optimized reaction conditions for obtaining the titled derivatives in their cone configuration and their characterization by spectroscopic methods (IR, UV, NMR and FAB mass) have been delineated. The synthesized imidazolyl calixarenes have preliminarily been examined for selective recognition of monovalent metal ions (Li⁺, Na⁺, K⁺, Cs⁺, Ag⁺).     

Complexation and extraction of non-ferrous metals by calix[n]arene phosphine oxides

The extraction of non-ferrous metal (M²⁺) nitrates by the calix[4,6]arenes (L), bearing four or six phosphine oxide donor groups at the upper or at the lower rim, was quantitatively described in the form of [M_n(NO₃)_2nL] (n = 1, 2) complexes. The extraction constants (Zn²⁺ > Cu²⁺ > Co²⁺ > Ni²⁺) for the both types of L coincide with Irving-Williams sequence. Calix[4]arenes, phosphorylated at the lower (narrow) rim, provide better stability of ML complexes because of the best spatial fitting of M²⁺ by the donor groups. For the upper (wide) rim phosphorylated calix[4]arenes M₂L and ML₂ complexes are more stable. Unusual zwitterionic [Co₂(NO₃)₄L] complex of the lower rim tetraphosphorylated calix[4]arene 1 was determined by X-ray structural analysis.     

Calix[4]arenes bearing α‐amino‐ or α‐hydroxyphosphonic acid fragments at the upper rim

By the reaction of para‐formylcalix[4]arenes 1–6 with trialkyl phosphites in the presence of dry hydrogen chloride, calix[4]arenes 7–13 possessing dialkylphosphoryl‐hydroxymethyl groupings at the upper rim were synthesized. Calix[4]arenes 18–23 functionalized with dialkylphosphoryl‐alkyl(aryl)aminomethyl groups were obtained by sodium‐promoted addition of dialkyl phosphites to C=N bonds of para‐iminocalix[4]arenes 14–17 . The consecutive treatment of α‐hydroxy‐ or α‐aminophosphonic acid dialkyl esters of calix[4]arenes 7, 10, 18 , and 21 with bromotrimethylsilane and methanol gave dihydroxyphosphoryl derivatives of calix[4]arenes 24–27 . It was shown that calix[4]arenes bearing at the macrocyclic upper rim hydroxymethylphosphonic fragments, as well as bis‐hydroxymethyl(aminomethyl)phosphonic fragments, are able to undergo self‐assembly with formation of dimeric OH···O=P hydrogen bonded associates. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:58–67, 2001     

Calix[4]tubes: a new class of potassium-selective ionophore

A new class of cryptand-like ionophore based on a bis calix[4]arene structure has been developed. These molecules proved highly selective for complexation of potassium over all group I metal cations and barium. A range of symmetric and asymmetric calix[4]tubes featuring either alkyl or phenyl substituents at the upper rim have been synthesized in exceptional yield. Alteration of the calix[4]arene upper rim environment enables fine-tuning of the rate of potassium uptake, which can be evaluated through the conformational change on binding by NMR studies. Selectivity of potassium complexation has been demonstrated using NMR and electrospray mass spectral techniques. Molecular modeling studies, derived from crystallographic data, confirm that the potassium metal cation is complexed via the axial route, passing through the calix[4]arene annulus, and provide evidence for complexation rate and selectivity.     

Recent advances in upper rim functionalization of resorcin[4]arene derivatives: Synthesis and applications

Abstract

During the last decades, resorcin[4]arenes have drawn much attention in the field of supramolecular chemistry because of their practical applicability in different areas. Therefore, many scientists have investigated this class of derivatives in recent years. In this article, we comprehensively reviewed a brief literature survey on the chemistry of upper rim functionalization of calix[4]resorcinarene derivatives and their applications concerning optical chemosensors, liquid crystal materials, host-guest systems, catalysis, drug delivery, biological activities, and analytical applications. This short review describes the survey of literature synthesis and upper rim functionalization of resorcin[4]arenes and their different application published in the last six years (2015–2020).     

Modification of the upper rim of homooxacalix[3]arenes and complexation between a nitrohomooxacalix[3]arene derivative and n-hexylamine

Several functional groups were introduced on the upper rim of (lower rim free) homooxacalix[3]arene for the first time. The swinging nitrohomooxacalix[3]arene host 1 was fixed in the cone conformation by complexation with n-hexylamine.