[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

Uranyl ion complexes with long chain aminoalcoholbis(phenolate) [O,N,O,O′] donor ligands

The reaction between uranyl nitrate hexahydrate and phenolic ligand precursor [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-4-amino-1-butanol) · HCl], H₃L1 · HCl, leads to a uranyl complex [UO₂(H₂L1)₂] (1a) and [UO₂(H₂L1)₂] · 2CH₃CN (1b). The ligand [(N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-4-amino-1-butanol)H₃L2 · HCl], H₃L2 · HCl, yields a uranyl complex with a formula [UO₂(H₂L2)₂] · CH₃CN (2). The ligand [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-5-amino-1-pentanol) · HCl], H₃L3 · HCl, produces a uranyl complex with a formula [UO₂(H₂L3)₂] · 2CH₃CN (3) and the ligand [(N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-5-amino-1-pentanol) · HCl], H₃L4 · HCl, leads to a uranyl complex with a formula [UO₂(H₂L4)₂] · 2CH₃CN (4). The ligand [(N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-6-amino-1-hexanol) · HCl], H₃L5 · HCl, leads to a uranyl complex with a formula [UO₂(H₂L5)₂] · 4toluene (5). The complexes 1–5 are obtained using a molar ratio of 1:2 (U to L) in the presence of a base (triethylamine). The molecular structures of 1a, 1b, 3, 4 and 5 were verified by X-ray crystallography. All complexes are neutral zwitterions and have similar centrosymmetric, mononuclear, distorted octahedral uranyl structures with the four coordinating phenoxo ligands in an equatorial plane. In uranyl ion extraction studies from water to dichloromethane with ligands H₃L1 · HCl–H₃L5 · HCl, ligands H₃L1 · HCl, H₃L4 · HCl and H₃L5 · HCl are the most effective ones.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.     

Synthesis,spectral and EPR studies of oxovanadium(IV) complexes incorporating tridentate ONO donor hydrazone ligands: Structural study of one oxovanadium(V) complex

Five oxovanadium(IV) complexes of 2-hydroxy-4-methoxybenzaldehyde nicotinic acid hydrazone (H₂L¹), 2-hydroxy-4-methoxyacetophenone nicotinic acid hydrazone (H₂L²) and a binuclear oxovanadium(V) complex of H₂L² have been synthesized. These complexes were characterized by different physicochemical techniques like electronic, infrared and EPR spectral studies. The complexes [VOL¹]₂ · H₂O (1) and [VOL²]₂ · H₂O (4) are binuclear and [VOL¹bipy] (2), [VOL¹phen] · 1.5H₂O (3) and [VOL²phen] · 2H₂O (6) are heterocyclic base adducts and are EPR active. In frozen DMF at 77 K, all the oxovanadium(IV) complexes show axial anisotropy with two sets of eight line patterns. The complex [VOL² · OCH₃]₂ (5) is an unusual product and has distorted octahedral geometry, as obtained by X-ray diffraction studies.     

The first synthesis of dihydro-3H-pyrido[2,3-b][1,4]diazepinols and a new alternative approach for diazepinone analogues

The first synthesis of a series of 2-aryl(heteroaryl)-4-trifluoromethyl-4,5-dihydro-3H-pyrido[2,3-b][1,4]diazepin-4-ols, where aryl = C₆H₅, 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-CH₃C₆H₄, 4-OCH₃C₆H₄, 4,4′-biphenyl, 1-naphthyl and heteroaryl = 2-thienyl, 2-furyl obtained from the direct cyclocondensation reaction of 4-methoxy-1,1,1-trifluoroalk-3-en-2-ones with 2,3-diaminopyridine in 54-71% yield, is reported. Another alternative and efficient route for the synthesis of a series of 2-aryl(heteroaryl)-3H-pyrido[2,3-b][1,4]diazepin-4(5H)-ones from the reaction 4-methoxy-1,1,1-trichloroalk-3-en-2-ones with 2,3-diaminopyridine, in 54-70% yield, is also reported.     

Syntheses and characterizations of nine coordination polymers of transition metals with carboxylate anions and bis(imidazole) ligands

Nine new compounds, namely [CuL1(biim-6)] · H₂O (1), [ZnL1(biim-6)] · H₂O (2), [MnL1(biim-6)] · H₂O (3), [MnL1(biim-4)] (4), [Co₂(L2)₂(biim-5)₃ · 6H₂O] · 8H₂O (5), [ZnL3(biim-6)] (6), [ZnL3(biim-5)] (7), [CdL3(biim-5) · 1.5H₂O] · 0.5H₂O (8) and [CdL4(biim-6) · 2H₂O] (9) [where L1 = oxalate anion, L2 = fumarate anion, L3 = phthalate anion, L4 = p-phthalate anion, biim-4 = 1,1′-(1,4-butanediyl)bis(imidazole), biim-5 = 1,1′-(1,5-pentanedidyl)bis(imidazole) and biim-6 = 1,1′-(1,6-hexanedidyl)bis(imidazole)] were successfully synthesized. Compounds 1–3 are isostructural, and display 2D polymeric structures. Compound 4 shows a threefold interpenetrating diamondoid framework. In compound 5, the anions act as counterions, and the metal cations are bridged by bis(imidazole) ligands to form 1D polymeric chains. Compounds 6–9 show 2D polymeric structures. The magnetic properties for 1, 3 and 4 and luminescent properties for 2 and 6–9 are discussed. Thermogravimetric analyses (TGA) for these compounds are also discussed.     

Structural variations in self-assembled cadmium benzoate complexes

A series of mixed ligand cadmium(II) complexes having 3,5-dimethylpyrazole and aromatic carboxylate are structurally characterized. The effect of substituent on aromatic ring and also the effect of composition on co-ordination behavior of these complexes are ascertained. Hydrogen bonded self-assembled mononuclear complexes are obtained from composition [Cd(L)₂(L_a)₂] where L_a = 3,5-dimethylpyrazole L = R–C₆H₄COO– [R = H (1), 2-Cl (2), 4-OH (3), 2-OH (4)]. The cadmium complex (5) having composition [Cd(L)₂(L_a)(H₂O)] (L = 2-NO₂–C₆H₄COO–) is tetra-nuclear. The complex has eight and six co-ordination around cadmium and self-assembles through hydrogen bonding leading to form extended chain structure. The four complexes (1–4) have six co-ordinated trigonal prismatic geometry around cadmium ions. Cadmium complexes having composition [Cd(L)₂(L_a)] such as R = 4-NO₂ (6), 4-Cl (7), and 1-naphthoate complex (8) are co-ordination polymers with seven co-ordination geometry around cadmium. In these co-ordination polymers different Cd–Cd distances are observed for alternate pair of cadmium ions. For example in the case of the co-ordination polymer of 4-nitro-benzoate complex the Cd–Cd distance between alternate pairs are 4.138 Å, and 3.748 Å. The 1-naphthoate complex having pyridine has composition [Cd(L)₂(L_b)₂](H₂O)] (9) where L_b = pyridine and L = 1-naphthoate has seven co-ordination with a distorted pentagonal bipyramid geometry.     

Separation and quantification of [RhCln(H2O)6−n] (n = 0-6) complexes, including stereoisomers, by means of ion-pair HPLC-ICP-MS

A hyphenated ion-pair (tetrabutylammonium chloride—TBACl) reversed phase (C₁₈) HPLC-ICP-MS method (High Performance Liquid Chromatography Inductively Coupled Plasma Mass Spectroscopy) for anionic Rh(III) aqua chlorido-complexes present in an HCl matrix has been developed. Under optimum chromatographic conditions it was possible to separate and quantify cationic Rh(III) complexes (eluted as a single band), [RhCl₃(H₂O)₃], cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻ and [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species. The [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) complex anions eluted as a single band due to the relatively fast aquation of [RhCl₆]³⁻ in a 0.1 mol L⁻¹ TBACl ionic strength mobile phase matrix. Moreover, the calculated t_1/2 of 1.3 min for [RhCl₆]³⁻ aquation at 0.1 mol kg⁻¹ HCl ionic strength is significantly lower than the reported t_1/2 of 6.3 min at 4.0 mol kg⁻¹ HClO₄ ionic strength. Ionic strength or the activity of water in this context is a key parameter that determines whether [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species can be chromatographically separated. In addition, aquation/anation rate constants were determined for [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 3-6) complexes at low ionic strength (0.1 mol kg⁻¹ HCl) by means of spectrophotometry and independently with the developed ion-pair HPLC-ICP-MS technique for species assignment validation. The Rh(III) samples that was equilibrated in differing HCl concentrations for 2.8 years at 298 K was analyzed with the ion-pair HPLC method. This analysis yielded a partial Rh(III) aqua chlorido-complex species distribution diagram as a function of HCl concentration. For the first time the distribution of the cis- and trans-[RhCl₄(H₂O)₂]⁻ stereoisomers have been obtained. Furthermore, it was found that relatively large amounts of ‘highly’ aquated [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 0-4) species persist in up to 2.8 mol L⁻¹ HCl and in 1.0 mol L⁻¹ HCl the abundance of the [RhCl₅(H₂O)]²⁻ species is only 8-10% of the total, far from the 70-80% as previously proposed. A 95% abundance of the [RhCl₆]³⁻ complex anion occurs only when the HCl concentration is above 6 mol L⁻¹. The detection limit for a Rh(III) species eluted from the column is below 0.147 mg L⁻¹.     

Mechanistic study on the coupling reaction of aryl bromides with arylboronic acids catalyzed by (iminophosphine)palladium(0) complexes. Detection of a palladium(II) intermediate with a coordinated boron anion

The complexes [Pd(eta2-dmfu)(P-N)] [P-N = 2-(PPh2)C6H4-1-CH=NR, R = C(6)H(4)OMe-4; CHMe2; C6H3Me2-2,6; C6H3(CHMe2)-2,6] react with an excess of BrC6H4R1-4 (R1= CF3; Me) yielding the oxidative addition products [PdBr(C6H4R1-4)(P-N)] at different rates depending on R [C6H4OMe-4 > C6H3(CHMe2)-2,6 > CHMe2 approximately C6H3Me2-2,6] and R1 (CF3> Me). In the presence of K2CO3 and activated olefins (ol = dmfu, fn), the latter compounds react with an excess of 4-R2C6H4B(OH)2 (R2= H, Me, OMe, Cl) to give [Pd(eta2-ol)(P-N)] and the corresponding biaryl through transmetallation and fast reductive elimination. The transmetallation proceeds via a palladium(II) intermediate with an O-bonded boron anion, the formation of which is markedly retarded by increasing the bulkiness of R. The intermediate was isolated for R = CHMe2, R1 = CF3 and R2= H. The boron anion is formulated as a diphenylborinate anion associated with phenylboronic acid and/or as a phenylboronate anion associated with diphenylborinic acid. In general, the oxidative addition proceeds at a lower rate than transmetallation and represents the rate-determining-step in the coupling reaction of aryl bromides with arylboronic acids catalyzed by [Pd(eta2-dmfu)(P-N)].     

A new series of potentially hexadentate ligands derived from 2,2′-bipyridine

Reaction of 2,2′-bipyridine-6-carboxaldehyde with the appropriate aliphatic diamine in MeOH and subsequent reduction with NaBH₄ gives the new, potentially hexadentate, ligands N,N′-bis(2,2′-bipyridin-6-ylmethyl)ethane-1,2-diamine (bmet), N,N′-bis(2,2′-bipyridin-6-ylmethyl)propane-1,3-diamine (bmpp) and N,N′-bis(2,2′-bipyridin-6-ylmethyl)hexane-1,6-diamine (bmhx). The syntheses and characterisation of these ligands are reported; the ligands are isolated as the hydrochloride salts, with purification effected by either recrystallisation or cation exchange chromatography. [Co(bmet)](ClO₄)₃ · H₂O is obtained on reaction of bmet · 4.25HCl · 2.5H₂O with Na₃[Co(O₂CO)₃] · 3H₂O, and X-ray structural analysis shows this to have a pair of very short Co–N bonds. The synthesis and characterisation of the first coordination complex containing 6-(aminomethyl)-2,2′-bipyridine (amb) is also described.     

Efficient solid-state microwave-promoted complexation of a mixed dioxa-diaza macrocycle with an alkali salt. Synthesis of a sodium ethyl 4-benzeneazophosphonate complex

The first example of microwave-promoted solid-state synthesis of an alkali complex derived from a heteromacrocyclic compound has been described. The 15-membered mixed dioxa-diaza macrocycle 5,6,14,15-dibenzo-1,4-dioxa-8,12-diazacyclopentadeca-5,14-diene (L) by reaction with sodium ethyl [4-α-(benzeneazoanilino)-N-benzyl]phosphonate (NaEP · 1.5H₂O) yielded the sodium complex [Na(L)(μ-EP) · H₂O]₂, as a diphosphonate-bridged dinuclear species. The new complex was identified and characterized on the basis of elemental and thermal (TG and DTA) analyses as well as by IR, ¹H and ¹³C nuclear magnetic resonance, and ESI and LDI mass spectroscopic studies. The results obtained by the reaction carried out under focused microwave conditions are compared with those obtained by conventional thermal reactions, both in the solid-state and in solution.     

New calсium β-diketonate complexes: The monomeric complexes [Ca(PhCOCHCOCF3)2(15-crown-5)], [Ca(AdCOCHCOCF3)2(15-crown-5)] and the binuclear hydrated complex [{Ca(adtfa)(18-crown-6)(H2O)}{Ca(adtfa)3(H2O)}(EtOH)]. Synthesis, characterization and crystal structure

The preparation of the Ca-β-diketonate complexes with crown-ethers, [Ca(btfa)₂(15-crown-5)] (1), [Ca(adtfa)₂(15-crown-5)] (2), [Ca(adtfa)₂(15-crown-5)](C₆H₅CH₃)_0.5 (3) and [{Ca(adtfa)(18-crown-6)(H₂O)}{Ca(adtfa)₃(H₂O)}(EtOH)] (4) (btfa = 1,1,1-trifluoro-4-phenyl-butanedionato-2,4; adtfa = 1,1,1-trifluoro-4-(1-adamantyl)butanedionato-2,4; 15-crown-5 = 1,4,7,10,13-pentaoxacyclopentadecane; 18-crown-6 = 1,4,7,10,13,16-hexaoxacyclooctadecane), is described. Complex 1 has been prepared from the reaction of metallic Ca with 2 eq. of Hbtfa and 1 eq. of 15-crown-5 in toluene; complex 2 has been prepared from the reaction of metallic Ca with 2 eq. of Hadtfa and 1 eq. of 15-crown-5 in ethanol. The solvated complex 3 was obtained by cooling of a toluene-hexane solution of 2. The hydrated complex 4 was prepared from the reaction of metallic Ca with 2 eq. of Hadtfa and 1 eq. of 18-crown-6, followed by addition of excess H₂O to the resulting reaction mixture. The all complexes were characterized by elemental analyses, IR-spectroscopy, NMR-spectroscopy, single-crystal X-ray diffraction methods, DSC and TGA. A single-crystal X-ray study of 1 and 3 has show that complexes 1 and 3 are monomeric and contain the calcium atom bonded with two β-diketonate ligands and one molecule of crown-ether. Complex 4, as shown by X-ray analyses, is an ion-paired solvated adduct, containing the cation {Ca(adtfa)(18-crown-6)(H₂O)}⁺ and the anion {Ca(adtfa)₃(H₂O)}⁻. The monomeric complexes 1-3 are volatile and thermally stable in the temperature range 100-260 °C. Complex 4 undergoes decomposition above 110 °C with consecutive loss of ethanol, H₂O, 18-crown-6 and some evaporization of 4.     

Synthesis, characterization and photophysical study of a series of neutral isocyano rhodium(I) complexes with pyridylindolide ligands

Pyridylindole ligand and its chloro substituted derivatives have been synthesized and incorporated into the square planar bis(phenylisocyano) rhodium(I) complexes to give a series of neutral rhodium(I) complexes with general formula of [Rh(X-pyind)(CNR)₂] (R = 2,6-(CH₃)₂-4-BrC₆H₂, 2,4-Cl₂-6-(CH₃O)C₆H₂, 2,4,6-Br₃C₆H₂, 2,4,6-Cl₃C₆H₂; L = 2-(2′-pyridyl)indole, 5-chloro-2-(2′-pyridyl)indole, 4,6-dichloro-2-(2′-pyridyl)indole). The structures of two complex precursors [Rh(cod)(Cl-pyind)] and [Rh(cod)(Cl₂pyind)], and the target complex [Rh(pyind)(CNC₆H₂-2,4-Cl₂-6-(OCH₃))₂] were determined by X-ray crystallography. The UV-vis absorption properties of these complexes and their responses towards the change of temperature were also investigated.     

Synthesis of triarylphosphines having para -SH and -SMe groups: Preparation of their complexes and formation of a monolayer on a gold surface

The phosphines P(C₆H₄-4-SR)₃ (R = H, Me, 2-C₅H₉O) and (C₆H₄-4-SR)₂PCH₂CH₂P(C₆H₄-4-SR)₂ (R = H, Me) have been synthesized. The phosphines with -SMe groups can be prepared by reaction of 4-BrC₆H₄SMe with either BuLi or magnesium (to generate the corresponding Grignard compound) followed by reaction with PCl₃ or Cl₂PCH₂CH₂PCl₂, respectively. The methyl group can be eliminated by reaction with sodium in liquid NH₃. Other methods of protection/deprotection of the thiol group failed to afford the desired compounds. Reaction of 4-BrC₆H₄SH with dihydropyrane afforded the protected thiol 4-BrC₆H₄S-2-C₅H₉O from which the corresponding phosphine was successfully synthesized. However, attempts to remove the tetrahydropyranyl group by reaction with AgNO₃-HCl, gave an insoluble polymer as product. Reaction of P(C₆H₄SR)₃ (R = H, Me) with Ni(CO)₄ affords the corresponding mono phosphine complex quantitatively. The complex with the unprotected thiol group can be absorbed on a gold surface and the corresponding ν_CO bands were detected by grazing angle Fourier transform infrared reflection absorption spectroscopy (grazing angle FTIR-RAS). Reaction of Rh(acac)(CO)₂ with P(C₆H₄SR)₃ (R = Me) affords the complex Rh(acac)(CO)(P(C₆H₄SR)₃) (R = Me), but if R = H a polymer insoluble in any solvent was obtained. The same occurs in the case of PtCl₂(CO)(DMSO). Apparently, once P(C₆H₄SH)₃ is coordinated to a metal not in the zero oxidation state, oxidation of the thiol group to disulphide becomes very easy even in a dinitrogen atmosphere.     

Synthesis of 2-picolyl functionalized η-cyclopentadienyl derivatives of rhodium(I) and iridium(I) and preliminary study of their reaction with ruthenium(II) for assembling hetero-bimetallic complexes

The 2-picolylcyclopentadienyl derivatives of rhodium(I) and iridium(I) of formula [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(η⁴-C₈H₁₂)] (3) (M = Rh) and (4) (M = Ir) are obtained in good yields by reacting 2-picolylcyclopentadienyllithium (7) with [RhCl(η⁴-C₈H₁₂)]₂ and [IrCl(η⁴-C₈H₁₂)]₂, respectively. The corresponding dicarbonyl derivatives, [M{η⁵-C₅H₄(2-CH₂C₅H₄N)}(CO)₂] (5) (M = Rh) and 6 (M = Ir), are obtained in good yields by reacting 2-picolylcyclopentadienylthallium(I) (8) with [RhCl(CO)₂]₂ and [IrCl(C₅H₅N)(CO)₂], respectively. 5 has already been reported in the literature. The new complexes were characterized by elemental analysis, mass spectrometry, ¹H NMR, FT-IR, and UV-Vis (210-330 nm) spectroscopy. The UV-Vis spectra indicate the existence of some electronic interaction between the 2-picolinic chromophore and the cyclopentadienyl-metal moiety. The study of the electrochemical behaviour of 3-6 by cyclic voltammetry (CV) allows the interpretation of the electrode processes and gives information about the location of the redox sites. Moreover, various synthetic strategies were tested in order to try to coordinate the complexes 3-6 to a ruthenium(II) centre, but most of them failed. Instead, the hetero-bimetallic complex bis(2,2′-bipyridine)[(η⁵-2-picolylcyclopentadienyl)(η⁴-cycloocta-1,5-diene)rhodium(I)]chlororuthenium(II)-(hexafluorophosphate) (13), was obtained, although in poor yields (10%), by reacting the nitrosyl complex [RuCl(bipy)₂(NO)][PF₆]₂14 (bipy = 2,2′-bipyridine) first with potassium azide and then with the rhodium(I) complex 3. The analogous complex bis(2,2′-bipyridine)(2-picoline)chlororuthenium(II)-(hexafluorophosphate) (15), that carries a ruthenium-bonded 2-picoline molecule instead of 3, has prepared in the same way. 13 and 15 were characterized by elemental analysis, mass spectrometry, and ¹H NMR.     

N,N-polymethylene-bisadenine complexes with d metal ions

The reaction of N⁹,N^9′-(tri or tetramethylene)-bisadenines (Ade₂C_x; x = 3 or 4) in HCl 2 M at 50 °C with MCl₂ · 2H₂O [M = Zn(II), Cd(II)] yields outer sphere compounds like the previously described [(H-Ade)₂C₃][ZnCl₄] · H₂O (3) and [(H-Ade)₂C₃]₂[Cd₂Cl₈(H₂O)₂] · 4H₂O (4) for Ade₂C₃ and the new {[(H-Ade)₂C₄][Cd₂Cl₆(H₂O)₂] · 2H₂O}_n (5) for Ade₂C₄. On the other hand, only in case of Zn(II) complexes by changing [HCl] to 0.1 M, the inner sphere compounds [H-(Ade)₂C₃(ZnCl₃)] (6) and [H-(Ade)₂C₄(ZnCl₃)] · 1.5H₂O (7) are obtained. X-ray diffraction study of compound 6, which represents the first inner sphere complex with a N⁹,N^9′-bisadenine, shows a zwitterionic form with one adenine ring protonated at N(1) while the other ring is coordinated via N(7) to a ZnCl₃ moiety as in other alkyl-adenine derivatives. In addition, with Ade₂C₄, is also possible to obtain another inner sphere complex: [(H-Ade)₂C₄(ZnCl₃)₂] · 3H₂O (8).     

Dimeric water embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene

X-ray crystallographic analysis and density functional B3LYP/6-31G(d) calculation confirm that dimeric water is embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene and stabilized by hydrogen bondings of aromatic π?H₂O(1) and methyl?H₂O(2) in the dimeric water inclusion complex with binding energies of 1.4 and 0.9 kcal mol⁻¹ respectively, and by hydrogen bonding formed between H₂O(2) and four phenolic OH groups from an adjacent tetra-(p-tert-butyl)thiacalix[4]arene, with binding energy of 3.8-4.2 kcal mol⁻¹.     

Synthesis and characterisation of dinuclear and mononuclear Cobalt (II) benzoate complexes

Aqua-bridged binuclear cobalt (II) benzoate complexes having pyridine as auxiliary ligands are synthesised through solid state reactions and characterised. The binuclear core in these complexes comprise of two bridging benzoates and an aqua bridge. Each of the cobalt (II) centre is further co-ordinated to one benzoate and two pyridine ligands. The aqua-bridged cobalt (II) benzoate complex [Co₂(μ-H₂O)(μ-OBz)₂(OBz)₂(Py)₄] ·  (C₆H₆)(BzOH) (1a) is inclusion compounds with benzoic acid and benzene (where OBz  =  benzoate, py  =  pyridine). Analogous complex [Co₂(μ-H₂O)(μ-OBz)₂(OBz)₂(Py)₄] · 1.5(C₆H₆) without benzoic acid included is also prepared by an alternative method and structurally characterised. Analogous aqua-bridged complex derived from p-chlorobenzoic acid in unsolvated form is characterised. The Co–O–Co separation in these complexes is in the range of 3.55–3.64 Å with angles Co–O–Co varying from 111.8° to 116.4°. While similar reaction in solution leads to the formation of mononuclear complex having composition [Co(OBz)₂(Py)₂(H₂O)]. The unsubstituted benzoate complex 1a can be easily oxidised to form a tetrameric cobalt (III) complex having benzoate and oxo-bridged structure with a Co₄O₄ core.     

3D Heterometallic (3d–4f) coordination polymers: A ferromagnetic interaction in a Gd(III)–Cu(II) couple

Four 3d–4f heterometallic coordination polymers, [Cu₃(IDA)₆Ln₂] · n(H₂O) [IDA =  iminodiacetate dianion; Ln = Gd, n = 3 (1); Ln = Nd, n = 6 (2); Ln = Sm, n = 6 (3)] and [Cu(Cl)(NTA)Sm(H₂O)₆] · (ClO₄) · (H₂O) (4) [NTA = nitrilotriacetate trianion], have heen synthesized and characterized by single crystal X-ray diffraction analysis. Complexes 1–3 are isomorphous, showing a 3D coordination framework having tubular channels filled by lattice water molecules running parallel to the c axis. Whereas complex 4 is a 1D polymer of alternating copper and samarium ions connected by NTA, and the chains get involved in H-bonding interactions resulting in a 3D network. A low temperature magnetic study reveals ferromagnetic interactions for complex 1. Thermogravimetric and X-ray powder diffraction analyses of 1, 2 and 3 show that the covalently bonded 3D network remains almost unaffected after deaquation.     

Stabilisation of heterobimetallic networks by crown ethers and hydrogen-bonding in [Ni(H2O)6][Cu3Cl8(H2O)2] · (15-crown-5)2 · 2H2O: Structure and magnetism

[Ni(H₂O)₆][Cu₃Cl₈(H₂O)₂] · (15-crown-5)₂ · 2H₂O can be conveniently prepared by the interaction of NiCl₂ · 6H₂O, CuCl₂ · 2H₂O and 15-crown-5 in water. The X-ray crystal structure reveals an ionic complex involved in a hydrogen-bonded two dimensional network with the [Ni(H₂O)₆]²⁺ and [Cu₃Cl₈(H₂O)₂]²⁻ ions sandwiched between the 15-crown-5 macrocycles. The magnetic susceptibility data (4–300 K) and magnetisation isotherms (2–5.5 K; 0–5 T) are best interpreted in terms of intra-trimer ferromagnetic coupling within the [Cu₃Cl₈(H₂O)₂]²⁻ moieties, with J ∼ 6 cm⁻¹, and antiferromagnetic coupling between the trimers, the latter mediated by H-bonding pathways. Comparisons are made to other reported quaternary ammonium salts of [Cu₃Cl₈]²⁻ and [Cu₃Cl₁₂]⁶⁻, most of which display structures that involve close stacking of such Cu(II) trimers, rather than being of the present isolated, albeit H-bonded, types.