Efficient synthesis of enynes by tetraphosphine-palladium-catalysed reaction of vinyl bromides with terminal alkynes

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as catalyst, a range of vinyl bromides undergoes Sonogashira cross-coupling reaction with a variety of alkynes, leading to the corresponding 1,3-enynes in good yields. The reaction tolerates several alkynes such as phenylacetylene, dec-1-yne, 2-methylbut-1-en-3-yne a range of alk-1-ynols, 3,3-diethoxyprop-1-yne and a propargyl amine. Higher reactions rates were observed in the presence of phenylacetylene, dec-1-yne, but-3-yn-1-ol, pent-4-yn-1-ol, 3,3-diethoxyprop-1-yne or 1,1-dipropyl-2-propynylamine than with propargyl alcohol, 3-methoxy-prop-1-yne or 2-methylbut-1-en-3-yne. This catalyst can be used at low loading even for reactions of sterically hindered vinyl bromides such as bromotriphenylethylene or 2-bromo-3-methyl-but-2-ene.     

Heck reactions of 2-substituted enol ethers with aryl bromides catalysed by a tetraphosphine/palladium complex

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of β-substituted enol ethers with aryl bromides. Employing β-methoxystyrene, 3-ethoxyacrylonitrile or methyl 3-methoxyacrylate, the regioselective α-arylation of these enol ethers was observed in all cases, and mixtures of Z and E isomers were generally obtained, which in many cases yielded a single ketone product after acid treatment. The stereoselectivity of this reaction depends on steric and electronic factors, and better stereoselectivities in favour of Z isomers were observed with electron-rich or sterically congested aryl bromides. Better yields were obtained for this reaction with electron-rich or sterically congested aryl bromides than with electron-poor aryl bromides. This observation suggests that with these β-substituted enol ethers the rate-limiting step of the catalytic cycle is not the oxidative addition of the aryl bromide to the palladium complex.     

Sonogashira reaction of aryl halides with propiolaldehyde diethyl acetal catalyzed by a tetraphosphine/palladium complex

All-cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyzes the Sonogashira reaction of propiolaldehyde diethyl acetal with a variety of aryl bromides and chlorides. A minor electronic effect of the substituents of the aryl bromide was observed. Similar reaction rates were observed in the presence of activated aryl bromides such as 4-trifluoromethylbromobenzene and deactivated aryl bromides such as bromoanisole. Turnover numbers up to 95,000 can be obtained for this reaction. Even aryl chlorides and heteroarylbromides or chlorides have been successfully alkynylated with this catalyst. Moreover, a wide variety of substituents on the aryl halide such as fluoro, trifluoromethyl, acetyl, benzoyl, formyl, nitro, dimethylamino or nitrile are tolerated.     

Coupling reactions of aryl bromides with 1-alkynols catalysed by a tetraphosphine/palladium catalyst

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ system catalyses efficiently the coupling reactions of aryl halides with a variety of alkynols such as propargyl alcohol, but-1-yn-4-ol, pent-1-yn-5-ol or hex-1-yn-6-ol. The catalyst can be used at low loading. Higher reaction rates were observed in the presence of but-1-yn-4-ol, pent-1-yn-5-ol or hex-1-yn-6-ol than with propargyl alcohol. The protection of the alcohol functions as an ether or a silyloxy group led generally to similar or better results than the reactions performed with the unprotected alcohols.     

Heck reactions of aryl halides with alk‐1‐en‐3‐ol derivatives catalysed by a tetraphosphine–palladium complex

cis,cis,cis‐1,2,3,4‐Tetrakis(diphenylphosphinomethyl)cyclopentane–[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of alk‐1‐en‐3‐ol with a variety of aryl halides. In the presence of hex‐1‐en‐3‐ol or oct‐1‐en‐3‐ol, the β‐arylated carbonyl compounds were selectively obtained. Turnover numbers up to 84 000 can be obtained for this reaction. Linalool and 2‐methylbut‐3‐en‐2‐ol led regio‐ and stereoselectively to the corresponding (E)‐1‐arylalk‐1‐en‐3‐ol derivatives. A minor electronic effect of the substituents of the aryl bromide was observed. Quite similar reaction rates were generally observed in the presence of activated aryl bromides such as bromoacetophenone and deactivated aryl bromides such as bromoanisole, indicating that, with these alkenols and this catalyst, the oxidative addition of aryl bromides to palladium is not the rate‐limiting step. It should be noted that this reaction also proceeds with sterically very congested aryl bromides such as 9‐bromoanthracene or 2,4,6‐triisopropylbromobenzene or with a vinyl bromide. On the other hand, low yields were obtained with aryl chlorides. Copyright © 2006 John Wiley & Sons, Ltd.     

Direct synthesis of 3-arylpropionic acids by tetraphosphine/palladium catalysed Heck reactions of aryl halides with acrolein ethylene acetal

Through the use of [PdCl(C₃H₅)]₂/Cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as a catalyst, a range of aryl bromides undergoes Heck reaction with acrolein ethylene acetal. With this acetal, the selective formation of 3-arylpropionic acids/esters was observed. The functional group tolerance on the aryl halide is remarkable; substituents such as fluoro, methyl, methoxy, acetyl, formyl, benzoyl, nitro or nitrile are tolerated. Furthermore, this catalyst can be used at low loading, even for reactions of sterically hindered aryl bromides.     

Selective Heck reaction of aryl bromides with cyclopent-2-en-1-one or cyclohex-2-en-1-one

The selective Heck reaction of cyclopent-2-en-1-one or cyclohex-2-en-1-one with aryl bromides gives a simple access to the corresponding 3-arylcycloalk-2-en-1-ones. The choice of the base was found to be crucial to avoid the formation of 3-arylcyclopentanones or 3-arylcyclohexanones as side-products. Using KF as base, DMF as solvent and Pd(OAc)₂ as catalyst, the target products were obtained in moderate to good yields with a variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, acetyl, benzoyl, formyl, ester or nitrile on the aryl bromide are tolerated. Sterically congested aryl bromides or bromopyridines can also be employed.     

Synthesis of β-aryl ketones by tetraphosphine/palladium catalysed Heck reactions of 2- or 3-substituted allylic alcohols with aryl bromides

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as a catalyst, a range of aryl bromides undergoes Heck reaction using 2- or 3-subtituted allylic alcohols. With these sterically congested alkenes, the selective formation of β-aryl ketones was observed when appropriate reaction conditions were used. The influence of the functional group on the aryl bromide and of the base on the selectivity is remarkable. With several substrates, much higher selectivities were obtained using NaHCO₃ instead of K₂CO₃ as base. Furthermore, this catalyst can be used at low loading with several substrates.     

Heck arylations of pent-4-enoates or allylmalonate using a palladium/tetraphosphine catalyst

The Heck reaction of aryl halides with functionalised alk-1-enes should be a powerful method for the synthesis of functionalised (E)-1-arylalk-1-ene derivatives. The major problem of this reaction is the palladium-catalysed migration of the carbon-carbon double bond along the alkyl chain when there are no substituents on the C3 carbon of the alk-1-enes. We observed that for the arylation of ethyl pent-4-enoate, ethyl 2-methylpent-4-enoate or dimethyl allylmalonate this migration could be partially or completely controlled using appropriate reaction conditions. The ramification on the alkyl chain and the substituents on the aryl halide have also an important influence on this migration. Moreover, the cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane/1/2[PdCl(C₃H₅)]₂ system catalyses this reaction with a wide range of aryl bromides using very high ratio substrate/catalyst in good yields.     

Suzuki Coupling of Cyclopropylboronic Acid With Aryl Halides Catalyzed by a Palladium–Tetraphosphine Complex

The tetraphosphine all‐cis‐1,2,3,4‐tetrakis(diphenylphosphinomethyl)cyclopentane (Tedicyp) in combination with [Pd(C₃H₅)Cl]₂ affords a very efficient catalyst for the coupling of cyclopropylboronic acid with aryl bromides and aryl chlorides. Higher reactions rates were observed with aryl bromides than with aryl chlorides; however, even in the presence of 1–0.4% of catalyst, a few aryl chlorides gave the coupling products in good yields. A wide variety of substituents such as alkyl, methoxy, trifluoromethyl, acetyl, benzoyl, formyl, carboxylate, nitro, and nitrile on the aryl halides are tolerated. The coupling reaction of sterically very congested aryl bromides such as bromomesitylene or 2,4,6‐triisopropylbromobenzene also proceeds in good yields.     

Selective synthesis of (E)-triethyl(2-arylethenyl)silane derivatives by reaction of aryl bromides with triethyl vinylsilane catalysed by a palladium-tetraphosphine complex

Cis, cis, cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane / 0.5 [PdCl(C₃H₅)]₂ system catalyses the Heck reaction of vinylsilane derivatives with a range of aryl bromides with high ratio substrate/catalyst in good yields. The formation of mixtures of styrene, (E)-triethyl(2-arylethenyl)silane and triethyl(1-arylethenyl)silane derivatives was observed in some cases. Very high selectivities (up to 100%) in favour of the formation of (E)-triethyl(2-arylethenyl)silane derivatives were obtained in the presence of sodium acetate as base. With other bases such as potassium carbonate, the formation of large amounts of styrene derivatives was observed. The reaction tolerates several functions such as fluoro, trifluoromethyl, methoxy, dimethylamino, acetyl, formyl, benzoyl, carboxylate, nitro or nitrile. Moreover, turnover numbers up to 10,000 can be obtained for this reaction.     

Tetraphosphine/palladium catalysed Suzuki cross-coupling reactions of aryl halides with alkylboronic acids

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as a catalyst, a range of aryl bromides and chlorides undergoes Suzuki cross-coupling with alkylboronic acids in good yields. Several alkyl substituents such as ethyl, n-butyl, n-octyl, isobutyl or 2,2-dimethylpropyl on the alkylboronic acids have been successfully used. The functional group tolerance on the aryl halide is remarkable; substituents such as fluoro, methyl, methoxy, acetyl, formyl, benzoyl, nitro or nitrile are tolerated. Furthermore, this catalyst can be used at low loading, even for reactions of sterically hindered aryl bromides.     

Sonogashira cross-coupling reactions of aryl chlorides with alkynes catalysed by a tetraphosphine-palladium catalyst

A range of aryl chlorides undergoes cross-couplings with alkynes in good yields in the presence of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as catalyst. A variety of aryl chlorides such as chloroacetophenone, chlorobenzonitrile, chloronitrobenzene, chloroanisole or chlorotoluene have been used successfully. The reaction also tolerates several alkynes such as phenylacetylene, dec-1-yne, ethynylcyclohexene or alk-1-ynols. Furthermore, this catalyst can be used at low loading with some substrates.     

Heck reaction of aryl halides with linear or cyclic alkenes catalysed by a tetraphosphine/palladium catalyst

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ system catalyses efficiently the Heck reaction of aryl halides with linear alkenes such as pent-1-ene, oct-1-ene or dec-1-ene. Selectivities up to 70% in favour of E-1-arylalk-1-ene isomers can be obtained. In the presence of cyclic alkenes the selectivities of the reactions strongly depends on the ring size. Addition to cyclohexene or cycloheptene led mainly to 1-arylcycloalk-3-ene derivatives. On the other hand, addition to cyclooctene led to 1-arylcycloalk-1-ene adducts.     

Tetraphosphine/palladium-catalyzed Heck reactions of aryl halides with disubstituted alkenes

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of disubstituted alkenes such as methyl crotonate, ethyl cinnamate, methyl methacrylate or α-methylstyrene with a variety of aryl halides. In the presence of 1,2-disubstituted alkenes the stereoselectivities of the reactions strongly depend on the substituents of the alkenes. Selectivities up to 97% in favor of E-isomers can be obtained for the addition to methyl crotonate. With the 1,1-disubstituted alkenes methyl methacrylate or α-methylstyrene mixtures of products are obtained.     

Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

Synthesis of 1,5-disubstituted (E)-pent-2-en-4-yn-1-ones

The condensation of 3-arylpropynals with aryl methyl ketones in the presence of sodium hydroxide in 50% aqueous ethanol at 0°C (Claisen-Schmidt reaction) afforded up to 89% of the corresponding (E)-1,5-diarylpent-2-en-4-yn-1-ones. The E configuration of the double C=C bond and cis conformation of the enone fragment in the products in crystal and CDCl₃ solution were determined by X-ray analysis and ¹H NMR spectroscopy.     

Chemoenzymatic routes to cyclopentenols: the role of protecting groups on stereo- and enantioselectivity

Enantiopure (R)-4-triisopropylsilyloxycyclopent-2-en-1-one was obtained through short sequences including either the enzymatic resolution of racemic cis-4-triisopropylsilyloxycyclopent-2-en-1-ol or the enzymatic desymmetrization of cis-cyclopent-2-en-1,3-diol. Alternatively, the enantiopure (S)-4-triisopropylsilyloxycyclopent-2-en-1-one was very efficiently obtained from diacetate of cis-cyclopent-2-en-1,3-diol using enzymatic desymmetrization with CAL-B. In these sequences, TIPS proved to be the best protecting group.     

Synthesis and applications of a new palladacycle as a high active catalyst in the Suzuki couplings

The reaction of biphenyl-based phosphine P(o-C₆H₄Me)Ph₂ (1) with Pd(OAc)₂ in toluene affords the air and water stable palladacycle (2) as a binuclear compound which has been characterized by multi-nuclear NMR spectroscopy and elemental analysis as a mixture of cis and trans isomers with relative intensity of 1:3, respectively. This palladacycle is a highly efficient catalyst precursor for the coupling of aryl boronic acids and aryl halides. Both activated and deactivated aryl bromides and chlorides are efficiently coupled in the presence of 2 to furnish the corresponding cross-coupled products in excellent yields, and a wide variety of functional groups are tolerated in aryl halides. This methodology has also been extended for the coupling of bromoarylphosphines and bromoarylphosphine oxides with aryl boronic acids for the generation of hindered corresponding products.     

Palladium/tetraphosphine catalyzed suzuki cross‐coupling of heteroarylboronic acids with aryl halides

cis,cis,cis‐1,2,3,4‐Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyses the Suzuki reaction of heteroarylboronic acids with aryl bromides and also the coupling of arylboronic acids with heteroaryl bromides. The coupling of thiophene‐ or benzothiopheneboronic acids, furan‐ or benzofuranboronic acids and 3‐pyridineboronic acid with a variety of aryl bromides gave the corresponding coupling products in good yields. However, in most cases, better results in terms of ratio substrate/catalyst were obtained for the reverse reaction using heteroaryl bromides with arylboronic acids.