Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.     

The preparation of [closo-1-CB9H8-1-COOH-10-(4-C3H7C5H9S)] as intermediate to polar liquid crystals

The preparation of iodo acid [closo-1-CB₉H₈-1-COOH-10-I]⁻ (1) is optimized and scaled from 1 to 40 g of B₁₀H₁₄. The improved preparation of the [arachno-6-CB₉H₁₃-6-COOH]⁻ (5) uses four times smaller volume and can be run conveniently in up to 40 g scale in a 3-L vessel. The optimized oxidation of 5 to [closo-2-CB₉H₉-2-COOH]⁻ (4) requires less oxidant, 12 times smaller volume, and significantly shorter reaction time. The overall yields of the iodo acid 1 as the [NMe₄]⁺ salt are typically 8-10% (10-12 g) for 40 g of B₁₀H₁₄. The iodo acid 1 was transformed to amino acid 8, then to dinitrogen acid 10, and finally to sulfonium acid 2[3] in overall yield of about 13%. The search for a more efficient phosphine ligand for the Pd-catalyzed amination process was not fruitful. Three routes to the sulfonium acid 2[n] were investigated, and the best yield of about 47% was obtained for Cs₂CO₃-assisted cycloalkylation. Liquid crystalline ester of acid 2[3] and 4-butoxyphenol was prepared and investigated.     

Calix[4]arenes containing urea and crown/urea moieties: effects of the crown ether unit and Na towards anion binding ability

Calix[4]arenes containing urea and crown/urea moieties, 7 and 10, respectively have been synthesized. ¹H NMR titrations of 7 and 10 with anions in DMSO-d₆ showed that 7 and 10 formed complexes with Cl⁻, Br⁻, NO₃⁻ and H₂PO₄⁻ to a different extent. The association constants of 7 and 10 towards anions were calculated and found to vary as H₂PO₄⁻>Cl⁻>Br⁻>NO₃⁻. However, compared to 7 the presence of the crown unit in 10 resulted in a slightly higher affinity to Cl⁻ and Br⁻, but a lower affinity to H₂PO₄⁻. Upon addition of Na⁺, the binding ability of 10 towards H₂PO₄⁻ is increased due to ion-pair enhancement.     

Synthesis of new calix[4]arenes containing nucleoside bases

A family of novel calix[4]arene derivatives containing nucleoside bases were designed and synthesized. Coupling reaction between para mono- or bis-amino calix[4]arenes 5, 6 or 7 and thymin-1-ylacetic acid in the presence of DCC afforded mono- or bis-thymine-substituted calix[4]arenes 8, 9 or 10 in over 70% yield. Owing to the low solubility of adenine-N⁹-ylacetic acid in DMF and DMSO and the weak nucleophilicity of aminocalix[4]arene derivatives, alternatively, the substitution reaction of bromoacetylated aminocalix[4]arenes derivatives 11, 12, 13 with adenine in the presence of sodium hydride was carried out to synthesize mono- or bis-adenine-substituted calix[4]arenes. Two kinds of isomers 15 and 16 or 17 and 18 were obtained due to the non-regiospecific alkylation of adenine, and their structures have been confirmed by ¹³C NMR and ¹H NMR spectra.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

1,n′-Disubstituted ferrocenoyl amino acids and dipeptides: Conformational analysis by CD spectroscopy, X-ray crystallography, and DFT calculations

An experimental and computational study on the conformational preference of 1,n′-disubstituted ferrocenoyl amino acids and dipeptides is presented. Only l-amino acids were used for the synthesis of Fe[C₅H₄-CO-Met-Met-OMe]₂ (4), but according to the X-ray structure a 4:1 mixture of l,d,M,d,l and l,d,M,l,l isomers is obtained (l describes amino acid chirality and M the helical chirality of the ferrocene core). This result is in agreement with IR and CD solution phase data and can be explained with a racemization by 1 M NaOH during the synthesis. In order to determine the relative stabilities of the different conformations, DFT calculations on model compounds Fe[C₅H₄-CO-Gly-NH₂]₂ (5) and Fe[C₅H₄-CO-Ala-OMe]₂ (6) were performed using the B3LYP/LanL2DZ method with ECPs on the heavy atoms. Conformers 5A-5C with different hydrogen bond patterns have significantly different stabilities with a stabilization by about 30 kJ mol⁻¹ per hydrogen bond. The “Herrick conformation” 5A with two hydrogen bonds is the most stable in the gas phase, in accordance with the solution and solid phase data. In contrast, only small energetic differences (less than 10 kJ mol⁻¹) were calculated for conformers l,P,l-6A, l,P,d-6A and d,P,d-6A, which differ only in amino acid chirality.     

Synthesis of two calix[4]arene diamide derivatives for extraction of chromium(VI)

The synthesis of four diamide derivatives of the p-tert-butylcalix[4]arenes from the reaction of 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-dihydroxycalix[4]arene 2 with various primary amines were reported. The ¹H and ¹³C NMR, data showed that the synthesized compounds exist in the cone conformation. The complexing properties of these compounds toward Cr₂O₇²⁻/HCr₂O₇⁻ anions are also studied. It has been observed that receptors 5 and 6 are better extractant than the compounds 3 and 4. The protonated alkyl ammonium form of 5 and 6 is an effective extractant for transferring HCr₂O₇⁻/Cr₂O₇²⁻ anions from an aqueous phase into a dichloromethane layer.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

p-tert-Butyl thiacalix[4]arenes functionalized at the lower rim by o-, m-, p-amido and o-, m-, p-(amidomethyl)pyridine fragments as receptors for α-hydroxy- and dicarboxylic acids

A series of new p-tert-butyl thiacalix[4]arenes with o-, m-, p-amido and o-, m-, p-(amidomethyl)pyridine substituents at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized. The ability of the obtained compounds to recognize the α-hydroxy (glycolic, tartaric) and dicarboxylic (oxalic, malonic, succinic, fumaric, and maleic) acids was investigated by UV-vis spectroscopy. Also, the efficiency and selectivity of binding, the association constants log K_a (10² to 10⁷ M⁻¹) and the stoichiometry were determined for the complexes of p-tert-butyl thiacalix[4]arenes with the acids. The receptors based on p-tert-butyl thiacalix[4]arenes with (amidomethyl)pyridine substitutes are most efficient in complexation in many cases.     

The supramolecular chemistry of metal complexes with heavily substituted imidazoles as ligands: Cobalt(II) and zinc(II) complexes of 1-methyl-4,5-diphenylimidazole

An investigation of the M^II/X⁻/L [M^II = Co, Ni, Cu, Zn; X⁻ = Cl⁻, Br⁻, I⁻, NCS⁻, NO₃⁻, N₃⁻, CH₃COO⁻; L = 1-methyl-4,5-diphenylimidazole] general reaction system towards the detailed study of the intermolecular interactions utilized for controlling the supramolecular organization and the structural consequences on the structures produced has been initiated. Three representative complexes with the formulae [Co(NO₃)₂(L)₂] (1), [Zn(NO₃)₂(L)₂] (2) and [Co(NCS)₂(L)₂]·EtOH (3·EtOH) have been synthesized and characterized by spectroscopic methods and single-crystal X-ray analysis. Compounds 1 and 2 are isomorphous (tetragonal, I4₁cd) with their metal ions in a severely distorted octahedral Co/ZnN₂O₄ environment, while 3·EtOH crystallizes in P2₁/c with a tetrahedral CoN₄ coordination. The structural analysis of 1, 2 and 3·EtOH reveals a common mode of packing among neighbouring ligands (expressed through intramolecular π–π interactions between the 4,5-diphenylimidazole moieties), enhancing thus the rigidity and stability of the complexes. The bent coordination of the two isothiocyanates in 3 [Co–NCS angles of 173.8(2) and 160.8(2)°] seems to be caused by intermolecular hydrogen bonding and crystal packing effects.     

Pyrrolamidocalix[4]arenes: new receptors for anion recognition

Pyrrolamidocalix[4]arenes 1-4, members of a new class of anion receptors bearing pyrrolic units at the upper rim of calix[4]arene macrocycle, have been readily synthesized in good yields. Derivatives 1 and 3, with unsubstituted pyrrole units, show a good selectivity for over F⁻ and AcO⁻, while the presence of electron-withdrawing NO₂ substituents in 2 and 4 inverts the selectivity favoring more basic AcO⁻ and F⁻. In addition, it is demonstrated that the flexibility of calix[4]arene skeleton, present in 1 but absent in 3, is very important in the fitting process that leads the amidopyrrole moieties to wrap the tetrahedral guest.     

A new family of pyrazolyl-based anionic bidentate ligands and crystal structure of bis(N-phenyl-2-pyrazolyl-1-carboximidothioato)copper(II)

Three new N,S-donor bidentate pyrazolyl-based ligands abbreviated as [PhNCSPz]⁻, 1, [PhNCSPz^Me2]⁻, 2, and [PhNCSPz^Ph2]⁻, 3, have been synthesized in THF by direct mixing of phenylisothiocyanide with suspension of appropriate sodium-pyrazolate salts and characterized by the common spectroscopic and analytical methods. The Cu(II) complexes of these anionic chelate ligands have been characterized and the crystal structure of Cu(PhNCSPz)₂, 4, has been determined. The space group of complex is P2₁c, with a = 5.9313(3), b = 21.206(1) Å, c = 8.0667(4) Å, β = 103.822(1)°.     

Synthesis and conformational behaviour of lower-rim tetraacetylated thiacalix[4]arenes

The acylation of thiacalix[4]arenes with AcCl or Ac₂O gave the corresponding lower-rim tetraacetoxy derivatives. In contrast to classical calix[4]arenes, tetraacetylated thiacalix[4]arenes are conformationally mobile in solution and represent a thermodynamic equilibrium of three different conformers at room temperature. As proven by a dynamic ¹H NMR study, conformational preferences of acetylated thiacalix[4]arenes considerably depend on the upper-rim substitution. Hence, t-Bu thiacalixarene prefers 1,3-alternate and 1,2-alternate conformations (43% and 38%, respectively), while the upper-rim unsubstituted compound adopts preferably the partial cone conformation (70%).     

Structural characterization of [Fe(NO)(mnt)2] salts

The iron dithiolene compounds [Fe₂(mnt)₄]²⁻ [1]²⁻ and [Fe(NO)(mnt)₂]ⁿ (n = 1−, [2]¹⁻; n = 2−, [2]²⁻) ([mnt]²⁻ = maleonitriledithiolate = [(NC)₂C₂S₂]²⁻) have been characterized structurally by X-ray diffraction as their [Et₄N]⁺ salts at 100 K. Dianion [2]²⁻ is prepared from [2]¹⁻ by reduction with Na[Et₃BH] and is observed to have a bent Fe-NO angle at 149.9(5)° in contrast to the linear configuration of Fe-NO in [2]¹⁻ (180.0°). The change from linear to bent binding mode for NO, an increase of more than 0.1 Å in the Fe-N bond length, and the relative invariance of the Fe-S distances for [2]²⁻ versus [2]¹⁻ indicate that the NO ligand is the site of reduction. The [Et₃NH]⁺ complex of [2]¹⁻ was also identified by crystallography and found to have hydrogen bonding contacts between [Et₃NH]⁺ and the cyano nitrogen atom of an [mnt]²⁻ ligand. Furthermore, relatively close S?S contacts (3.602-3.615 Å) occur between [2]¹⁻ anions, which pack together in an offset, head-to-head fashion. These S?S contacts are absent in the structure of [Et₄N][2]. Infrared spectra show an energy decrease for, and a significant broadening of, the NO bond stretching absorption peak in [2]²⁻, which is consistent with a bent NO ligand sampling a range of conformations both by facile pivoting about the Fe-N axis and by a breathing of the Fe-NO angle.     

Copper(II) complexes of N4 tetradentate ligands with flexible alkyl spacers: Crystal structure,DNA binding and cleavage studies

Mononuclear copper(II) complexes, [Cu L1] (ClO₄)₂ (1), [Cu L2] (ClO₄)₂ (2) and [Cu L3] (ClO₄)₂ (3) with quadridentate Schiff base ligands L1 (N,N′-bis-pyridin-2-ylmethyl-butane-1,4-diimine), L2 (N,N′-bis-pyridin-2-ylmethyl-pentane-1,5-diimine) and L3 (N,N′-bis-pyridin-2-ylmethyl-hexane-1,6-diimine) have been synthesized and characterized. The crystal structure data of 1 reveals the existence of the complex in two different geometries, namely a square pyramid and a distorted octahedron, which eventually leads to the packing of the molecule into helical and anti-parallel structures respectively. Absorption titration studies with calf thymus DNA for all three complexes are suggestive of groove binding with binding constant values for 1, 2 and 3 being 2.6 ± 0.2 × 10⁴ M⁻¹, 11.5 ± 0.2 × 10⁴ M⁻¹ and 1.83 ± 0.2 × 10⁴ M⁻¹ respectively. Control cleavage experiments using pBR 322 plasmid DNA and distamycin suggest minor groove binding for these complexes. In the presence of ascorbic acid, the complexes show efficient DNA cleavage, the order of efficiency being 1 > 2 ≅ 3.     

Solid chemistry of the Zn/1,2,4-triazolate/anion system: Separation of 2D isoreticular layers tuned by the terminal counteranions X (X=Cl, Br, I, SCN)

An array of 2D isoreticular layers, viz. [Zn(atrz)X]_∞ (1·X; X=Cl⁻, Br⁻, I⁻; atrz=3-amino-1,2,4-triazole anion), [Zn₄(atrz)₄(SCN)₄·H₂O]_∞ (1·SCN·H₂O) and [Zn(trz)X]_∞ (2·X; X=Cl⁻, Br⁻, I⁻; trz=1,2,4-triazole anion), have been hydrothermally synthesized and structurally characterized. Compounds 1·X and 1·SCN·H₂O are constructed from binuclear planar Zn₂(atrz)₂ subunits and exhibit (4,4) topological network when the subunits are simplified as four-connected nodes. Based on changing the terminal counteranions X (X=Cl⁻, Br⁻, I⁻, SCN⁻), the average interlayer separations of 1·X and 1·SCN·H₂O are enlarged, which equal to 5.851, 6.153, 6.651 and 8.292 Å, respectively. As a result, H₂O molecules reside in the spaces between two adjacent layers of 1·SCN·H₂O. 2 and 1 are the isomorphous structures. In common with 1, the interlayer separations of 2·X are widened with increasing the ion radius. Solid-state luminescence properties and thermogravimetric analyses of 1 and 2 were investigated, respectively.     

Anion receptors based on ureido-thiacalix[4]arenes

The regioselective ipso-nitration of tert-butylthiacalix[4]arene-tetrasulfone was used for the construction of thiacalixarene derivatives bearing one or two arylureido functions on the upper rim. The preorganization of ureido units using the thiacalix[4]arene moiety as a molecular scaffold leads to novel anion receptors with good complexation ability toward selected anions of various geometry (halides, carboxylates, HSO₄⁻, H₂PO₄⁻, NO₃⁻, CN⁻) in organic solvents.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

Ring transformation of cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium ion to the corresponding pyrrole derivatives via troponeimine intermediates: photo-induced autorecycling oxidizing reactions of some amines

Ring transformation of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan- 8(7H),10(9H)-dionylium tetrafluoroborate 4⁺·BF₄⁻ to 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrrole-8(7H),10(9H)-dionylium tetrafluoroborate 6a-d⁺·BF₄⁻ consists of the reaction of 4⁺·BF₄⁻ with amines and subsequent exchange of the counter-ion using aq. HBF₄. Reactions of 4⁺·BF₄⁻ with aniline and 4-substituted anilines afforded the corresponding pyrrole derivatives 6a-c⁺·BF₄⁻ directly in good yields. On the other hand, reaction of 4⁺·BF₄⁻ with benzylamine gave the troponeimine intermediate 9, which was not converted to 6d⁺·BF₄⁻ and reverted to 4⁺·BF₄⁻ by adding HBF₄; however, it was converted to 6d⁺·BF₄⁻ upon treatment with (COCl)₂ or SOCl₂, followed by exchange of the counter-ion. In a search for the characteristics of 9, inspection and comparison of the X-ray crystal analyses, NMR and UV-vis spectra, and CV measurement of 9 and N,N-disubstituted troponeimine derivatives 12 were carried out to suggest the remarkable structure of 12 having ionic C-O bonding between the imine-carbon atom and the oxygen atom of the barbituric acid moiety in the solid state. Thus, characteristics of 9 were ascribed to the sterically hindered and favorable conformation of N-protonated troponeimine intermediates. Furthermore, novel photo-induced oxidation reactions of a series of 4⁺·BF₄⁻, 5⁺·BF₄⁻, and 6a,e⁺·BF₄⁻ towards some amines under aerobic conditions were carried out to give the corresponding imines in 455-8362% yields [based on compounds 4⁺, 5⁺, and 6a,e⁺], suggesting the oxidation reaction occurs in an autorecycling process. Mechanistic aspects of the amine-oxidation reaction are also postulated.     

Complexation and extraction of non-ferrous metals by calix[n]arene phosphine oxides

The extraction of non-ferrous metal (M²⁺) nitrates by the calix[4,6]arenes (L), bearing four or six phosphine oxide donor groups at the upper or at the lower rim, was quantitatively described in the form of [M_n(NO₃)_2nL] (n = 1, 2) complexes. The extraction constants (Zn²⁺ > Cu²⁺ > Co²⁺ > Ni²⁺) for the both types of L coincide with Irving-Williams sequence. Calix[4]arenes, phosphorylated at the lower (narrow) rim, provide better stability of ML complexes because of the best spatial fitting of M²⁺ by the donor groups. For the upper (wide) rim phosphorylated calix[4]arenes M₂L and ML₂ complexes are more stable. Unusual zwitterionic [Co₂(NO₃)₄L] complex of the lower rim tetraphosphorylated calix[4]arene 1 was determined by X-ray structural analysis.