Practical syntheses of 4-fluoroprolines

4-Fluoroprolines are among the most useful nonnatural amino acids in chemical biology. Here, practical routes are reported for the synthesis of the 2S,4R, 2S,4S, and 2R,4S diastereomers of 4-fluoroproline. Each route starts with (2S,4R)-4-hydroxyproline, which is a prevalent component of collagen and hence readily available, and uses a fluoride salt to install the fluoro group. Hence, the routes provide process-scale access to these useful nonnatural amino acids.     

Rh‐Catalyzed Direct Carboxylation of Alkenyl C−H Bonds of Alkenylpyrazoles

The Rh‐catalyzed direct carboxylation of alkenyl C?H bonds was achieved by using pyrazole as a removable directing group. In the presence of 5 mol% RhCl₃ ? 3H₂O, 6 mol% P(Mes)₃, and 2 equiv. of AlMe₂(OMe), the alkenyl C?H bond of various alkenylpyrazoles was directly carboxylated in good yields under CO₂ atmosphere. Furthermore, several useful transformations of the pyrazole moiety of the product were achieved to afford synthetically useful carboxylic acid derivatives in good yields.     

A straightforward synthesis of both enantiomers of allo-norcoronamic acids and allo-coronamic acids,by asymmetric Strecker reaction from alkylcyclopropanone acetals

Methylcyclopropanone hemiacetal (2S)-3a underwent the asymmetric Strecker reaction induced by a chiral amine to provide a useful synthesis of enantiomerically pure (1R,2S)-(+)-allo-norcoronamic acid 1 in good yield and high enantiomeric excess. From racemic alkyl hemiacetal (±)-3, the same methodology also constituted a useful way to prepare both (+)-1 and (−)-1 and (+)-allo-coronamic acid 2 and its antipode (−)-2 with good yield and high enantiomeric excess.     

Reaction of o‐Carboryne with Furans: Facile Synthesis of Carborane‐ Fused Oxanorbornenes and Their Derivatives

o‐Carboryne (1,2‐dehydro‐o‐carborane) is a very useful synthon for the synthesis of a variety of carborane‐functionalized molecules. Diels‐Alder reaction of o‐carboryne with furans gave a series of carborane‐fused oxanorbornenes in moderate to high yields using 1‐OTf‐1,2‐C₂B₁₀H₁₁ as carboryne precursor. The resultant cycloadducts can undergo hydrogenation, cyclic oxidation, bromination, [4 + 2]/[2 + 2] cycloaddition and nucleophilic ring opening reaction to afford a variety of highly functionalized carboranes that may find applications as useful basic units in medicine and materials science.     

Conversion of methoxyperfluoroisobutene to α-methylhexafluoroisobutyric acid fluoride by a phase transfer catalyst

Methoxyperfluoroisobutene was converted to α-methylhexafluoroisobutyric acid fluoride by a catalytic amount of phase transfer catalyst in quantitative yield.Methoxyoctafluoroisobutane, (CF₃)₂CHCF₂OCH₃ (1) which is synthesized by the reaction of perfluoroisobutene and methanol is a useful starting material for producing various fluorochemicals. It is ready hydrolyzed in sulfuric acid to give the methyl ester of hexafluoroisobutyric acid [1, 2].Dehydrofluorination of the ether (1) gives a vinyl ether (2) which is converted to a useful monomer (3), made previously by another route [3].

     

Trends in 19F-19F and 29Si-19F coupling constants in organosilicon derivatives containing SiF2 and Si2F4 units

Consideration of ¹⁹F-¹⁹F and ²⁹Si-¹⁹F coupling constants in a series of organosilicon derivatives containing SiF₂ and Si₂F₄ units reveals a number of trends which are useful for structural and stereochemical assignments. For example the vicinal ¹⁹F-¹⁹F coupling constants in a number of CSiF₂SiF₂C- derivatives (including straight chain compounds, disilacyclobutanes and disilacyclohexanes) show an apparent linear dependence on dihedral angle, varying in magnitude from near zero for small values of φ up to ca. 19 Hz for φ ～ 180°. This is particularly useful for stereochemical assignments [1,2]. In addition ²⁹Si-¹⁹F coupling constants appear to fall in quite distinct ranges (¹J_SiF > 300 Hz, 29 Hz < ²J_SiF < 55 Hz, ³J_SiF < 10 Hz). This is quite useful for structural assignments [1,6]. Reaction of SiF₂ with 1,3-cyclohexadiene gives two new silicon fluorine compounds: a disilabicyclo[2,2,2]octene and an HSi₂F₅-substituted cyclohexadiene.     

A Facile Preparation of the Ethylene Glycol Mono-Ketal of Cyclohexane-1, 4-Dione

The ethylene glycol mono-ketal of cyclohexane-1,4-dione (4) is an exceedingly useful bifunctional synthetic intermediate. In order to prepare synthetically useful amounts of the previously reported ¹ pyrrolidine enamine 5, we have developed a straightforward route which starts from cyclohexane-1,4-diol (1). We have found that oxidation of diol 1 with slightly less than 1 equivalent of Jones reagent² gives a mixture which contains a 90% yield of the desired hydroxy-ketone 2.³ The ketal 3 could be prepared directly from the crude hydroxy-ketone 2 by the standard procedure employing ethylene glycol and benzene with minimal extractive work up. We utilize a chromium trioxide-pyridine oxidation⁴ of the alcohol 3 to obtain the ketone-ketal 4. This procedure circumvents the problem caused by the high water solubility of intermediates 2 and 3 which frustrate some of the previously reported preparations.     

4-endo-Hydroxy-2-oxabicyclo[3.3.0]oct-7-en-3-one as a useful building block in the formal total syntheses of furofurandione natural products

4-endo-Hydroxy-2-oxabicyclo[3.3.0]oct-7-en-3-one (9) is a useful building block in the formal total syntheses of both Types A and B furofurandione natural products. The success of Pd-catalyzed epimerization of the γ-alkenyl substituent of the bislactones makes this methodology useful and versatile.     

A Carbazole Derivative Synthesis for Stabilizing the Quadruplex Structure

A new molecule of 3,6‐Bis(1‐methyl‐4‐vinylpyridium iodine)carbazole ( BMVC ) was synthesized for stabilizing the quadruplex structure of human telomeric sequence of d(T₂AG₃)₄ in vitro. Mixing BMVC with the DNA can raise the melting temperature of the d(T₂AG₃)₄ by ～ 13 °C, implying that BMVC could be a useful telomerase inhibitor. In addition, the fluorescence of the BMVC increased significantly upon interacting with the d(T₂AG₃)₄ which may be useful as a G‐quadruplex specific marker.     

S-trimethylsilyl benzophenone thiooxime,Ph2C=NSSiMe3. A moderately stable thiooxime precursor

The title compound, Ph₂C=NSSiMe₃, is a useful precursor for thiooximes, including the unstable Ph₂C=NSH.     

Improved synthesis of 4-amino-7-nitrobenz-2,1,3-oxadiazoles using NBD fluoride (NBD-F)

The 7-nitrobenz-2,1,3-oxadiazole (NBD) unit is a highly useful fluorescent tag with wide application in biology. Installation of the NBD group typically proceeds via the S_NAr reaction between an amine and an NBD halide. Herein, we demonstrate that NBD-F 1 results in significantly higher yields than NBD-Cl 2, and that triethylamine in dimethylformamide at 23 °C overnight is a broadly applicable set of conditions for this reaction. In particular, the highly useful fluorescent carbohydrate 2-NBD-glucosamine (2-NBDG, 3) can now be prepared in 75% yield with NBD-F as compared to 12% with NBD-Cl.     

Preparation of α-Halovinyl Sulfides by Eliminative Deoxygenation of α-Halosulfoxides

Abstract

Vinyl sulfides are useful synthetic intermediates¹ which have received increasing attention recently both as masked carbonyl moieties² and in carbon-carbon bond forming reactions.³ With regard to the latter, vinyl sulfide derivatives which are substituted in the α-position with halogen, tin, selenium, etc., are particularly useful due to the ready formation of anions upon treatment with a variety of organometallic reagents.^{3 d ? 1} We report here that synthetically useful halovinyl sulfides can be produced in high yield by the eliminative deoxygenation of the corresponding α-halosulfoxides induced by electrophilic silicon reagents.     

THE REACTION OF CARBOXYLIC ACID CHLORIDES WITH 2,4-BIS(4-METHOXYPHENYL)-1,3,2,4-DITHIADIPHOSPHETANE 2,4-DISULFIDE

Abstract

Carboxylic acid chlorides react with 2,4-bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane 2,4- disulfide to give the intermediates 2a,b; 2'a,b) which are useful as thioacylating agents. Compounds 2 react with amines under mild conditions to give the corresponding thioamides.     

Application of an Ion Beam Technique for the Design of Visible Light-Sensitive, Highly Efficient and Highly Selective Photocatalysts: Ion-Implantation and Ionized Cluster Beam Methods

As a new concept for the design of effective photocatalysts, an ion beam technology using accelerated metal ions, a metal ion implantation and an ionized cluster beam (ICB) method, have been applied to design unique photocatalysts. The metal ion implantation of TiO₂ and Ti-containing zeolites with highly accelerated metal ions (V⁺, Cr⁺, etc.) is useful in designing photocatalysts that can operate efficiently under visible light irradiation. Also, an ICB method with a low acceleration energy is useful in preparing transparent TiO₂ thin films on various types of substrates for the efficient photocatalytic degradation of pollutants diluted in water and air. The combination of the ICB method and metal ion implantation can develop the TiO₂ thin films that are able to operate not only under UV light but also under visible light irradiation.     

Mass spectra of some 2-methyl-3-(o- and p;-R-phenyl)-3,3a,4,5,6,7-hexahydro-2H-indazoles

The mass spectra of twelve 2-methyl-3-(o- and p-R-phenyl)-3,3a,4,5,6,7-hexahydro-2H-indazoles which have potentially useful pharmacological properties are presented.     

Optimizing Acetylene Sorption through Induced-fit Transformations in a Chemically Stable Microporous Framework

Developing practical storage technologies for acetylene (C₂H₂) is important but challenging because C₂H₂ is useful but explosive. Here, a novel metal–organic framework (MOF) ( FJI-H36 ) with adaptive channels was prepared. It can effectively capture C₂H₂ (159.9 cm³ cm⁻³) at 1 atm and 298 K, possessing a record-high storage density (561 g L⁻¹) but a very low adsorption enthalpy (28 kJ mol⁻¹) among all the reported MOFs. Structural analyses show that such excellent adsorption performance comes from the synergism of active sites, flexible framework, and matched pores; where the adsorbed-C₂H₂ can drive FJI-H36 to undergo induced-fit transformations step by step, including deformation/reconstruction of channels, contraction of pores, and transformation of active sites, finally leading to dense packing of C₂H₂. Moreover, FJI-H36 has excellent chemical stability and recyclability, and can be prepared on a large scale, enabling it as a practical adsorbent for C₂H₂. This will provide a useful strategy for developing practical and efficient adsorbents for C₂H₂ storage.     

Highly efficient electrophilic cyclization of N′-(2-alkynylbenzylidene)hydrazides

Electrophilic cyclization of N′-(2-alkynylbenzylidene)hydrazides with I₂, Br₂, or ICl under mild conditions is described. This reaction proceeds smoothly in dichloromethane at room temperature, which provides a useful method for the synthesis of functionalized isoquinolinium-2-yl amide.     

Determination of theoretical plates in gel permeation chromatography by using polydisperse materials (polymers)

The need for an improved method of expressing performance of GPC columns and operating conditions is discussed. It is shown that theoretical plates can be calculated from chromatograms of high molecular weight materials (polymers) if the curve widths are normalized for polydispersity. The resulting value N, where N = 16d²(v/W)², is a useful measure of the real plate count afforded by the columns to polymers and is useful for comparison purposes. Since N does not provide absolute data on separation, it is better to use formulas for resolution and fractionation when such data are needed.     

Synthesis of the two enantiomers of the sex pheromone of Diabrotica Undecimpunct at a Howardi and of chiral precursors of other pheromones starting from enantiomerically pure methyl hydrogen (R)-3-methylglutarate

Readily available methyl hydrogen (R)-3-methylglutarate(2) is a useful chiral building block for the synthesis of several biologically active compounds. Enantiomerically pure (R)-2 has been employed to synthesize stereospecifically each of the two enantiomers, 1a and 1b, of 10-methyl-2-tridecanone, the sex pheromone of the southern corn rootworm, Diabrotica undecimpunctata howardi Barber. Compound (R)-2 has been also used to prepare 99% optically pure (R)-3-methyl-1-pentanol (6) and enantiomerically pure (R)-5-methyl-i-tricosyne (7). These compounds are useful building blocks suitable for the further elaboration to other chiral insect pheromones.     

The use of SO2Cl2 in organometallic chemistry. Convenient high yield syntheses of [Fe(η-C5H5)(CO)3] [FeCl4] and [M(CO5Cl] (M = Mn or Re)

Depending on the substrate and the reaction conditions, SO₂Cl₂ is a useful reagent which brings about either chlorination or the formation of cationic species on reaction with transition metal carbonyl complexes.