A short-cut from 1-acetyl adamantane to 2-(1-adamantyl)pyrroles

The oxime of 1-acetyl adamantane 2 is added to acetylene (KOH/DMSO, 70 °C, initial acetylene pressure 13 atm, 30 min) to afford the corresponding O-vinyl oxime 5 in 80% yield. The latter upon heating (DMSO, 120 °C, 1 h) gives 2-(1-adamantyl)pyrrole 3, 1-acetyl adamantane 1, and adamantane (6:3:1 mass ratio), the yield of the pyrrole 3 being 83% (based on 1-acetyl adamantane 1 consumed). Under harsher conditions (NaOH/DMSO, 130 °C, atmospheric pressure of acetylene, 4 h) oxime 2 reacts with acetylene to furnish pyrrole 3, 1-acetyl adamantane 1, 1-vinyl adamantane 9, and adamantane (6:7:3:1 mass ratio), with the isolated yield of pyrrole 3 reaching 34%. Under pressure (NaOH/DMSO, 120 °C, initial acetylene pressure 14 atm, 1 h) the same reaction leads to 2-(1-adamantyl)-1-vinylpyrrole 4 and ketone 1 in 48% (based on consumed ketone 1) and 24% yields, respectively. The pyrrole 4 is easily deprotected to the corresponding 1H-pyrrole 3 in 77% yield by treatment (aqueous MeCN) with Hg(OAc)₂ and NaBH₄.     

Temperature dependent selective synthesis of linear 2-bromo and 2-alkoxyfuro[2,3-b]quinolines: reaction of 3-(2,2-dibromovinyl-)quinolin-2(1H)-ones with alcoholic KOH

Base promoted and temperature dependent reactions of 3-(2,2-dibromovinyl)quinolin-2(1H)-ones have been described. At 50 °C, the cyclization reactions afforded 2-bromofuro[2,3-b]quinolines in good yields. However, at elevated temperature (80 °C) the domino reaction proceeded affording 2-alkoxyfuro[2,3-b]quinolines via cyclization and nucleophilic substitution reactions.     

Synthesis ofo-andm-carborane derivatives of [2,2]paracyclophane and abnormal Clemmensen reduction of ketones of the [2,2]paracyclophane and carborane series

Methods for the synthesis of [2,2]paracyclophane derivatives containingo- andm-carboranyl substituents in position 4, separated from the [2,2]paracyclophane system by one or two C atoms (alcohols and ketones) were developed. The Clemmensen reduction of a number of ketones of the [2,2]paracyclophane ando-carbonane series occurs abnormally. The reduction of 1-benzoyl-o-carboranes to the corresponding alcohols by zinc in ethanol in a neutral medium was performed for the first time. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1206–1211, June, 1997.     

One-pot assembly of 4-methylene-3-oxa-1-azabicyclo[3.1.0]hexanes from alkyl aryl(hetaryl) ketoximes, acetylene, and aliphatic ketones: a new three-component reaction

A new three-component reaction between alkyl aryl(hetaryl)ketoximes, acetylene, and aliphatic ketones in the superbasic systems KOH/DMSO and LiOH/CsF/DMSO (70-90 °C, initial acetylene pressure 13-15 atm, 5-60 min) affords novel 4-methylene-3-oxa-1-azabicyclo[3.1.0]hexanes in yields of up to 75%. Using KOH/DMSO, the side products of the reaction are O-vinylketoximes and 2-aryl(hetaryl)pyrroles, while with LiOH/CsF/DMSO, the reaction proves to be selective, only minor amounts of the corresponding alkyl aryl(hetaryl) ketones being detectable.     

A one-pot synthesis of a branched tertiary phosphine oxide from red phosphorus and 1-(tert-butyl)-4-vinylbenzene in KOH-DMSO: an unusually facile addition of P-centered nucleophiles to a weakly electrophilic double bond

Red phosphorus reacts with 1-(tert-butyl)-4-vinylbenzene in a superbase media (KOH-DMSO, 90-100 °C, 3 h) to give tris[4-(tert-butyl)phenethyl]phosphine oxide in 77% yield. Microwave activation of the reaction affords the phosphine oxide in 82% yield in 6 min.     

Colorless poly(ether-imide)s deriving from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A series of poly(ether-imide)s (III) characterized by colorless, highly solubility was synthesized from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and various fluorinated aromatic diamines (I_a-h) in DMAc via polycondensation to form poly(amic acid) (II), followed by chemical (C) and thermal (H) imidization. These polymers had inherent viscosities ranging from 0.60 to 1.3 dL/g. These polyimides were highly soluble in a variety of organic solvent such as amide-type, ether-type and chlorinated solvents. Moreover, these poly(ether-imide) films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 390 nm and low b* value (a yellowness index) of 4.6-18.0. The III series showed strength tensile of 72-101 MPa, elongation at break of 11-25%, initial modulus of 1.5-2.0 GPa. The glass transition temperature (T_g) of III_a-h were in the range of 202-267 °C, and the decomposition temperature above 493 °C and left 40-65% char yield at 800 °C in nitrogen. They had the lower dielectric constants of 3.39-3.72 (1 MHz) and moisture absorptions in the range of 0.11-0.40%.     

Gas-phase thermolysis of 1-acylnaphtho[1,8-de][1,2,3]triazines. Interesting direct routes towards condensed naphtho[1,8-de]heterocyclic ring systems

FVP pyrolysis of 1-acylnaphtho[1,8-de][1,2,3]triazines at 500 °C and 10⁻² Torr gave exclusively the corresponding 2-substituted naphtho[1,8-de][1,3]oxazines. The latter was also obtained by static pyrolysis but in lower yield along with the corresponding N-(naphthalen-1-yl)acylamides. The reaction was studied kinetically and mechanistically.     

Reactivity and regiochemical behavior in the solvolysis reactions of (2,2-difluorocyclopropyl)methyl tosylates

The rate constants for acetolysis of (2,2-difluorocyclopropyl)methyl tosylate, and (2,2-difluoro-3-methylcyclopropyl)methyl tosylate at 92 °C and of 1-(2,2-difluorocyclopropyl)ethyl tosylate at 42 °C are reported and the reactivities and regiochemistries of ring opening of these systems are discussed and compared with expectations based on computational results. The results are discussed in terms of the use of (2,2-difluorocyclopropyl)methyl systems as mechanistic probes.     

Microwave-assisted cycloadditions of 2-alkynylbenzonitriles with sodium azide: selective synthesis of tetrazolo[5,1-a]pyridines and 4,5-disubstituted-2H-1,2,3-triazoles

Under microwave irradiation (75 W), treatment of 2-alkynylbenzonitriles with 1.5 equiv of sodium azide in DMSO at 140 °C gave 4,5-disubstituted-2H-1,2,3-triazoles in 60-99% yields. Additionally, adding 8 equiv of ZnBr₂ and using 8 equiv of sodium azide in DMF at 100 °C lead to the formation of tetrazolo[5,1-a]isoquinolines up to 87% yield.     

Synthesis and characterization of coordination polymers of a carboxylato cyclophane with metal [Zn(II) and Cd(II)]-2,2′-bipyridines

N,N′,N′′,N′′′-Tetrakis(3-carboxy-propionyl)-1,6,20,25-tetraaza-[6.1.6.1] paracyclophane, H₄cp has been complexed with metal (Zn(II) and Cd(II)) 2,2′-bipyridyls. The resulting complexes of the composition [{Zn(2,2′-bpy)}₂(cp)]_n·4H₂O 1 and [{Cd(2,2′-bpy)}₂(cp)]_n·5H₂O 2 (2,2′-bpy = 2,2′-bipyridine) have been characterized using spectroscopic (IR, solid state UV–Vis), elemental analysis and single-crystal X-ray diffraction measurements. In these complexes the cyclophane coordinates in different modes, and in complex 2, Cd(II) is hepta-coordinated. However, under harsh reaction conditions (using excess nitric acid and a longer reaction time) debranching of the cyclophane is observed in the reaction of Zn(2,2′-bpy)(NO₃)₂ with H₄cp, and a complex of the composition [Zn(2,2′-bpy)(Suc)]_n3 (suc = succinate) is isolated. Using non-covalent interactions, complexes 1 and 2 provide 3D supramolecular structures, whereas an infinite 1D chain structure is observed for complex 3. The thermal and photoluminescence properties of the complexes have also been studied.     

From 1,4-diketones to N-vinyl derivatives of 3,3′-bipyrroles and 4,8-dihydropyrrolo[2,3-f]indole in just two preparative steps

Dioximes of hexane-2,5-dione and cyclohexane-1,4-dione react with acetylene in an autoclave (KOH/DMSO, 100 °C, 1 h, initial pressure 14 atm) to give 2,2′-dimethyl-1,1′-divinyl-[3,3′]bipyrrole and 1,5-divinyl-4,8-dihydropyrrolo[2,3-f]indole in 12% and 6% yields, respectively, thus exemplifying a very simple, straightforward route to inaccessible or unknown pyrrolic assemblies.     

Reaction of guaiazulene with o-formylbenzoic acid in diethyl ether (or methanol) in the presence of hexafluorophosphoric acid: comparative studies on H and C NMR spectral properties of 3-guaiazulenylmethylium- and 3-guaiazulenium-ion structures

Reaction of guaiazulene (1) with o-formylbenzoic acid (2) in diethyl ether in the presence of hexafluorophosphoric acid at 25 °C for 90 min gives the corresponding monocarbenium-ion compound, [2-(carboxy)phenyl](3-guaiazulenyl)methylium hexafluorophosphate (3), quantitatively, which upon treatment with aq NaHCO₃ leads to 3-(3-guaiazulenyl)-2-benzofuran-1(3H)-one (5) in 96% isolated yield. Similarly, reaction of 1 with 2 in methanol under the same conditions as the above reaction affords two kinds of inseparable monocarbenium-ion compounds, 3 and (3-guaiazulenyl)[2-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (4) with an equilibrium between them, which upon reaction with a solution of NaBH₄ in ethanol at 25 °C for 30 min leads to 5 in 46% isolated yield and (3-guaiazulenyl)[2-(methoxycarbonyl)phenyl]methane (6) in 37% isolated yield. Along with the ¹H and ¹³C NMR spectral properties of a solution of 5 in trifluoroacetic acid-d₁ at 25 °C, whose molecular structure is converted to a ca. 1:1 equilibrium mixture of 7 possessing a partial structure of the 3-guaiazulenylmethylium-ion and 8 possessing a partial structure of the 3-guaiazulenium-ion, comparative studies on the ¹H and ¹³C NMR spectral properties of 7 and 8 with those of the monocarbenium-ion compound, (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (A), 5, and 6 are reported. From these NMR studies, it can be inferred that the positive charge of the 3-guaiazulenylmethylium-ion part of 7 apparently is transferred to the seven-membered ring, generating a resonance form of the 3-guaiazulenylium-ion structure η′, and the same result can be inferred for the previously documented monocarbenium-ion compounds A-I. Moreover, referring to a comparative study on the C-C bond lengths of A observed by the X-ray crystallographic analysis with those of the optimized (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium-ion structure for A calculated by a WinMOPAC (Ver. 3.0) program using PM3, AM1, or MNDOD as a semiempirical Hamiltonian, the optimized [2-(carboxy)phenyl](3-guaiazulenyl)methylium-ion structure for 3 calculated using PM3 is described.     

Stereoselective synthesis of homoallylic alcohols of the [2.2]paracyclophane series and their use as auxiliaries in asymmetric allylboration of aldehydes

Stereoselectivity of allylboration of 4-formyl[2.2]paracyclophane, 4-acetyl[2.2]paracyclophane, and 4-hydroxy-5-formyl[2.2]paracyclophane was studied and the relative configurations of the homoallylic alcohols obtained were established. Optically pure (Sp,Sc)-(+)-4-(4-hydroxy-1-methylbut-3-enyl)[2.2]paracyclophane and (Rc,Sc)-(+)-4-hydroxy-5-(4-hydroxybut-3-enyl)[2.2]paracyclophane were synthesized. The possibility of using (Sp,Sc)-(+)-4-(4-hydroxy-4-methylbut-3-enyl)[2.2]paracyclophane as a recoverable chiral auxiliary in asymmetric allylboration of aldehydes was demonstrated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 914–921, May, 2000.     

Zur frage transanularer II-II-wechselwirkungen im [2.2]metacyclophan, [2.2]Paracyclophan und 2,2′-spirobiindan

Concerning the question of transanular II-II-interactions in [2.2]metacyclophane, [2.2]paracyclophane and 2,2′-spirobiindane.From the quotient of the two dissociation constants (K₁/K₂) of [2.2]metacyclophane-bis-chromtricarbonyl (9·0 ± 1·9) it was concluded that there are no transanular II-II-interactions between the two benzene rings. The corresponding values for the bis-chromtricarbonyl-complexes of 2,2′-spirobiindane and [2.2]paracyclophane are 8·0 ± 1·5 and 10⁴, resp. These results are supported by IR-spectroscopical data of the CO-frequencies of the Cr(CO)₃-complexes of [2.2]metacyclophane and some derivatives, of 2,2′-spirobiindane and [2.2]paracyclophane.Moreover, UV-spectroscopic studies of tetracyanoethylene complexes of arenes are shown to be insignificant with regard to transanular II-II-interactions.     

毛细管气相色谱法研究对环芳烷二氯化产物的组成

在选定毛细管柱温,载气流量、分流比、注入口和ＦＩＤ的温度等色谱条件下,分析了对环芳烷（ＰＣＰ）二氯化产物的组成。定性分析结果表明,ＰＣＰ二氯化产物除主要组分是二氯对环芳烷（ＤＣＰＣＰ）外,还含少量的一氯对环芳烷（ＭＣＰＣＰ）和三氯对环芳烷（ＴＣＰＣＰ）;ＤＣＰＣＰ的色谱图上出现了３个明显的色谱峰,证明３种异构体相对含量较高。用丙酮－石油醚混合溶剂分离去除 物得到了纯度为９９．１％的ＤＣＰＣＰ。以邻苯二甲酸二丁酯为内标物,测定了ＤＣＰＣＰ对内标物的相对质量校正因子。按内标法定量分析了ＰＣＰ二氯化产物各组分的含量,对ＤＣＰＣＰ分析的相对标准偏差小于３％。     

Skeletal transformations of perfluorinated 2,2-diethyl- and 2-ethyl-2-phenyl-benzocyclobutenones under the action of antimony pentafluoride

Perfluoro-2-ethyl-2-phenylbenzocyclobutenone heated with SbF₅ at 70 °C and then treated with water, forms perfluoro-3-ethyl-3-phenylphthalide. In contrast to this, heating of perfluoro-2,2-diethylbenzo-cyclobutenone with SbF₅ at 70 °C gives, after treatment of the reaction mixture with water, perfluoro-2-(pent-2-en-3-yl)benzoic acid. When the reaction temperature is raised to 125 °C, a solution of a salt of perfluoro-4-ethyl-3-methylisochromenyl cation is obtained. Hydrolysis of the solution of the salt gives perfluoro-4-ethyl-3-methylisochromen-1-one.     

Rearrangements of the [2+2]-cycloadducts of DDQ and 2-ethynylpyrroles

The [2+2]-cycloadducts of DDQ and 2-ethynylpyrroles, upon ethanolysis (reflux, 15 min or room temperature, 24 h), rearrange from bicyclo[4.2.0]octadienediones to bicyclo[3.2.0]heptadienone- and cyclobutenyl-dihydrofuranone moieties in 55-83% yields, the former rearrangement being the major direction. Benzoquinone ring cleavage is regioselective to afford mostly bicyclo[3.2.0]heptadienone-pyrrole ensembles (85-90% selectivity) in 39-78% yields. The only exception is when the starting compounds contain an ethoxycarbonyl substituent and the pyrrole counterpart is a 4,5,6,7-tetrahydroindole fragment. In this case, the ratio of the rearrangement products is 1:1.2 in a total yield of 83%. An important feature of the dihydrofuranone pathway rearrangement is its 100% diastereoselectivity.     

Synthesis and characterization of fluorinated ionomer p-perfluoro-[1-(2-sulfonic)ethoxy]ethylated polyacrylonitrile-styrene

Fluorinated ionomer p-perfluoro[1-(2-sulfonic)ethoxy]ethylated polyacrylonitrile-styrene (SFAS) (5) was synthesized via electron transfer reaction between polyacrylonitrile-styrene (AS) (1) and perfluoro-di[2-(2-fluorosulfonyl)ethoxy]propionyl peroxide (FAP) (2) and followed by alkali hydrolysis and acidification of p-perfluoro[1-(2-fluorosulfonyl)ethoxy]ethylated polyacrylonitrile-styrene (3). The microstructure of ionomer 5 was well characterized by FTIR and ¹⁹F NMR. Its desulfonation occurred above 197 °C was found by TGA, the degree of substitution (DS) and ion exchange capacity (IEC) determined by titration were well controlled through changing the molar ratio of 2:1. The proton exchange membranes made of ionomer 5 have water uptake from 13.4 to 135.3% and conductivity up to 10⁻² S cm⁻¹ at 25 °C.     

Synthesis and Some Chemical Conversions of 2-([2,2]-5-Paracyclophanyl)pyrrole

2-([2,2]-5-Paracyclophanyl)pyrrole has been synthesized and nitration and formylation of it have been effected. The 1--cyanoethyl derivative and 2-formyl-5-paracyclophanyl-3H-pyrrolizine have been obtained from 5-formyl-2-([2,2]-5-paracyclophanyl)pyrrole by the action of acrylonitrile and acrolein respectively under Michael reaction conditions.