Entropy versus tether strain effects on rates of intramolecular 1,3-dipolar cycloadditions of N-alkenylnitrones

Intramolecular 1,3-dipolar cycloadditions of two N-alkenylnitrones are studied by means of density functional theory calculations. Cycloaddition of an acyclic 4-hexenylnitrone led to the expected isoxazolidine in 46% yield, but a 4-cycloheptenylnitrone did not react. Calculations of the transition states for cycloaddition indicate that although the cycloheptenyl nitrone has a more favorable activation entropy, the strain associated with distortion of the tethering groups into the required boat conformation disfavors the reaction of the cyclic substrate over the acyclic substrate by 8.7 kcal/mol.     

Synthesis of functionalized polyhedral oligomeric silsesquioxane (POSS) macromers by microwave assisted 1,3-dipolar cycloaddition

In this paper we report the first synthesis of isoxazolidine and isoxazoline-POSS macromers by 1,3-dipolar cycloaddition reactions of vinyl- and styryl-POSS with N-methyl-C-ethoxycarbonylnitrone and ethoxycarbonyl nitrile oxide, promoted by microwave irradiation. The nature of the resulting cycloadducts has been determined by NOE experiments and supported by computational studies at PM3 and DFT B3LYP/6-31G* levels.     

Ab initio and DFT studies on the mechanism of the 1,3-dipolar cycloaddition reaction between nitrone and sulfonylethene chloride

The molecular mechanism for the 1,3-dipolar cycloaddition of nitrone with sulfonylethene chlorides has been studied using ab initio and DFT methods at the HF, MP2 and B3LYP levels together with the 6-31G* basis set. Relative rates, stereo and regioselectivity, have been analysed and discussed. For this cycloaddition four reactive channels associated with the formation of two pairs of diastereoisomeric regioisomers have been characterized. Analysis of the geometries of the corresponding transition structures shows that the cycloaddition takes place along a concerted but asynchronous mechanism. Activation energies as asynchronicity are dependent on the computation level. Thus, while HF calculations gave large barriers, MP2 calculations tend to underestimate them. DFT calculations gave reasonable values. These 1,3-dipolar cycloadditions present an endo stereoselectivity while the meta regioselectivity depends on the computational level. Thus, while HF and DFT calculations predict meta path, in agreement with the experimental results, MP2 calculation predict ortho regioselectivity. The frontier molecular orbitals analysis shows that the reaction is controlled by the (HOMO_dipole–LUMO_{dipolarophile}) interaction in agreement with the charge transfer analysis carried out at the transition structures. Inclusion of diffuse functions at the B3LYP/6-31+G* level increases the energy barriers about 4 kcal/mol, giving a similar endo/meta selectivity. Solvent effects have been taken into account, by means of self-consistent reaction field.     

Novel 1,3-dipolar cycloadditions of fulvenes and hydrazonyl chlorides: a facile synthesis of the cyclopenta[d]pyridazines

A simple and convenient route for one-pot synthesis of cyclopenta[d]pyridazine through 1,3-dipolar cycloaddition of fulvenes and hydrazonyl chlorides is described. The reaction of fulvenes with hydrazonyl chlorides in the presence of silver carbonate smoothly afforded a series of cyclopenta[d]pyridazines.     

Synthesis of 4′-thionucleosides by 1,3-dipolar cycloadditions of the simplest thiocarbonyl ylide with alkenes bearing electron-withdrawing groups

Reactions of the simplest thiocarbonyl ylide with a variety of appropriate alkenes bearing electron-withdrawing substituents afforded the corresponding tetrahydrothiophenes, which could be easily elaborated into hydroxy and hydroxymethyl derivatives and then coupled with nucleobases to produce different 4′-thionucleosides. Particularly, α- and β-anomers of 1-[3,4-bis(hydroxymethyl)tetrahydro-2-thienyl]-thymine, -cytosine, -uracil and -fluorouracil were prepared with dimethyl fumarate and maleate, while 1-[4-(hydroxymethyl)tetrahydro-2-thienyl]- and 1-[4-(hydroxymethyl)tetrahydro-3-thienyl]-thymine, -cytosine, -uracil and -fluorouracil were prepared with a chiral α,β-unsaturated amide. These processes, simple in the experimental conditions and large availability of the starting materials, affording moderate to good yields of 4′-thionucleosides, represent an optimum alternative to those, already known, based on sugars, which often have the drawbacks of a higher number of steps and lower yields.     

Acid-catalyzed aza-Diels-Alder versus 1,3-dipolar cycloadditions of methyl glyoxylate oxime with cyclopentadiene

The acid-catalyzed 1,4- and 1,3-cycloadditions between methyl glyoxylate oxime (1) and cyclopentadiene were investigated using various Lewis and/or Bronsted acids at different temperatures in dichloromethane as solvent. Besides the expected new adducts, (±)-methyl [(3-exo)-2-hydroxy-2-azabicyclo[2.2.1]hept-5-ene]-3-carboxylate (2) and (±)-methyl [(3-endo)-2-hydroxy-2-azabicyclo[2.2.1]hept-5-ene]-3-carboxylate (3), a third adduct, (±)-methyl (1R,4R,5R)-(2-oxa-3-azabicyclo[3.3.0]oct-7-ene)-4-carboxylate (4), whose formation can be explained by a 1,3-dipolar cycloaddition, was obtained. Yields and product ratios were found to be more dependent on the catalyst than on the temperature; these results and the stereochemistry of the adducts, confirmed by spectroscopic data (¹H and ¹³C NMR) and by X-ray crystallography, were used to analyze and propose a mechanistic explanation for both cycloadditions.     

Investigations on intramolecular 1,3-dipolar cycloadditions for the synthesis of isoxazolo-annulated pyrrolidines,piperidines and azepanes

Pyrrolidines, piperidines, and azepanes with annulated isoxazole, isoxazoline or isoxazolidine rings were prepared by intramolecular 1,3-dipolar cycloadditions of nitrones or nitrile oxides. The corresponding 1,3-dipoles were obtained from N-Boc-protected and N-allyl-, N-propargyl- or N-(3-butenyl)-substituted 2-aminoethanal or 3-aminopropanal.     

Unexpected opening of benzimidazole derivatives during 1,3-dipolar cycloaddition

Hydroxylamine hydrochloride adds via a Michael reaction on the acetonylidene moiety of (4Z)-(2-oxopropylidene)-1,2,4,5-tetrahydro-2H-1,5-benzodiazepin-2-one, leading only to 2-[(5-methyl-isoxazol-3-yl)]methyl]benzimidazoles. This report describes the difference of reactivity of C-phenyl-N-phenyl formohydrazonoyl chloride with benzimidazole. For the N-substituted benzimidazole, an unexpected opening of the azole ring occurs, which was confirmed by single crystal X-ray diffraction analysis.     

A facile synthesis of pyrazoles with multi-point structural diversity by 1,3-dipolar cycloaddition

We describe the synthesis of diverse pyrazoles by 1,3-dipolar cycloaddition of ethyl diazoacetate with various acetylenes in refluxing toluene. The product pyrazoles are useful starting points for preparing a diverse collection of trisubstituted pyrazole carboxamides. For aryl and heteroaryl alkynes a single product is obtained while alkyl alkynes afford a ca. 6:1 mixture of regioisomers. The observed regioselectivity for the cycloaddition step and the ease of reaction are consistent with predictions derived from computing the HOMO-LUMO energies of the reactants.     

Tricyclic-isoxazolidine analogues via intramolecular 1,3-dipolar cycloaddition reactions of nitrones

The tricyclic-isoxazolidine analogues tetrahydrothiochromenoisoxazoles, hexahydroisoxazolequinolines and tetrahydroisoxazolepyranopyridines were prepared by an intramolecular 1,3-dipolar cycloaddition reaction of a nitrone with an alkene. For N-alkylated hexahydroisoxazolequinolines, reduction of the reaction time from two days to 40 min was achieved using microwave heating. The cyclization to form tetrahydroisoxazolepyranopyridines only proceeded when the alkene was substituted with an electron withdrawing group.     

Theoretical study of 1,3-dipolar cycloadditions of nitrone and fulminic acid with substituted ethylenes

Molecular orbital calculations were performed to examine the electronic effects involved in the regioselectivity in the 1,3-dipolar cycloaddition reaction of nitrone and fulminic acid. The substituted ethylene dipolarophiles were selected to represent a range of electron-donating/withdrawing abilities: amino, methyl, carbaldehyde (both in the s-cis and the s-trans conformations), and nitrile. The reactions were all asynchronous, with early transition sites. The regioselectivity was correlated with the ability of the substituent to donate or withdraw electrons. With electron-donating substituents, the substituent was directed preferentially to the oxygen end of the dipole and this shifted toward the other regioisomer as the electron-withdrawing ability of the substitutent increased. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 1795–1804, 1998     

Three-component couplings for the synthesis of pyrroloquinoxalinones by azomethine ylide 1,3-dipolar cycloaddition chemistry

1-Methyl-3,4-dihydroquinoxalin-2(1H)-one was heated with a range of aldehydes to generate intermediate azomethine ylides which underwent [3 + 2] cycloaddition reactions with N-methyl or N-phenylmaleimide to give substituted tetrahydropyrroloquinoxalinones. Only one (racemic) stereoisomer was formed in each case and the stereochemical outcome was verified by single crystal X-ray analysis. The products from this multicomponent reaction could be oxidised with DDQ to the pyrroloquinoxalinones.     

A stereoselective method for the synthesis of enantiopure 3-substituted 4-hydroxyproline derivatives via 1,3-dipolar cycloadditions

The stereoselective 1,3-dipolar cycloaddition between (Z)-1,4-dichloro-2-butene and a menthone-derived nitrone led to the corresponding isoxazolidine. Regioselective azidation of a single chlorine atom followed by another Cu(I)-catalyzed azide–alkyne 1,3-dipolar cycloaddition (CuAAC) induced enantiopure 1,2,3-triazolyl-functionalized isoxazolidines. The subsequent acidic cleavage of the menthone chiral auxiliary and reductive cleavage of the isoxazolidine N–O bond triggered an intramolecular cyclization through the displacement of the second chlorine. This rapid and stereoselective synthetic strategy provided reliable access to a series of enantiopure 3-substituted 4-hydroxyproline derivatives.     

Regioselective synthesis of novel spiroindane-1,3-diones through 1,3-dipolar cycloaddition reactions

A facile synthesis of novel spiroindane-1,3-diones has been achieved via 1,3-dipolar cycloaddition of an azomethine ylide, generated in situ from ninhydrin and 1,2,3,4-tetrahydroisoquinoline, with the conjugated double bond of chalcone derivatives. The regiochemistry and structures of the cycloadducts were determined with spectroscopic data and by X-ray crystal structure analysis.     

Synthesis of non-aggregating chlorins and isobacteriochlorins from meso-tetrakis(pentafluorophenyl)porphyrin: a study using 1,3-dipolar cycloadditions under mild conditions

The 1,3-dipolar cycloaddition of meso-tetrakis(pentafluorophenyl)porphyrin and its nickel complex, with the bulky azomethine ylide dipole was studied under mild conditions, and yielded chlorin and isobacteriochlorin derivatives self-prevented from aggregation. The reactions were performed at room temperature or 0 °C, and we were able to establish a set of reaction conditions to obtain only the chlorin or the isobacteriochlorin. These compounds were evaluated in solution, and no aggregation was observed at less than 25 mM (∼30 mg mL⁻¹) using ¹H NMR experiments.     

Chiral bis(2-oxazolinyl)xanthene (xabox)/transition-metal complexes catalyzed 1,3-dipolar cycloaddition reactions and Diels-Alder reactions

A series of chiral 4,5-bis(2-oxazolinyl)-(2,7-di-tert-butyl-9,9-dimethyl)-9H-xanthenes (xabox) and their transition-metal complexes were synthesized. The X-ray analysis of xabox-RhCl₃ complex shows a unique facial type structure. Xabox-Bn-Mn(II) and xabox-Bn-Mg(II) complexes were found to be efficient catalysts in nitrone 1,3-dipolar cycloaddition (1,3-D.C.) reaction resulting in good to excellent enantioselectivities ranging from 96:4 to >99:1of endo/exo ratio and 91-96% ee for the endo adduct. The correlation between enantiomeric excess of the ligand and the product in the nitrone 1,3-D.C. reaction shows a clear linear relationship, which suggests xabox-metal catalyst worked as a single molecular catalyst. In addition, xabox-i-Pr-Mn(II) complex was also found to be an active catalyst for Diels-Alder (D-A) reaction of acryloyloxazolidinone and cyclopentadiene affording the corresponding cycloadduct in quantitative yield along with 82% ee and 98:2 endo/exo ratio.     

A facile synthesis of chromeno[3,4-c]spiropyrrolidine-oxindoles via 1,3-dipolar cycloadditions

A facile one-pot synthesis of chromene bearing novel spiropyrrolidine-oxindoles has been accomplished by the [3+‏2]-cycloaddition reaction of 3-acetyl-2H-chromen-2-ones with azomethine ylides derived in situ from isatin or N-methyl isatin with sarcosine.     

Synthesis of spiroisoxazolidinyl-benzoisothiazolines by 1,3-dipolar cycloaddition of benzoisothiazole-2,2-dioxide-3-ylidenes with nitrones

The spiroisoxazolidinyl-benzoisothiazoline derivatives were synthesized through a highly diastereoselective 1,3-dipolar cycloaddition of benzoisothiazole-2,2-dioxide-3-ylidenes with nitrones. The regiochemistry of cycloaddition was assigned on the ¹H NMR chemical shift of methane-H in 3 and 5. The relative stereochemistry of cycloadducts was determined from the single-crystal X-ray crystallography.     

An intramolecular one-pot synthesis of steroidal triazoles via 1,3-dipolar cycloadditions of in situ generated diazo compounds

A novel synthetic route is reported for the preparation of steroidal triazoles via intramolecular 1,3-dipolar cycloaddition of a steroidal 16,17-seco-17-diazo-16-nitrile system. The structures of the products are established by X-ray and NMR studies. The in vitro antiproliferative activity of the steroidal triazoles against three tumor cell lines was evaluated.     

One-pot,five-component 1,3-dipolar cycloaddition: A facile synthesis of spiropyrrolidine and spiropyrrolizidine derivatives

A one-pot, five-component strategy toward the synthesis of new indole substituted pyrrolidine and pyrrolizidine heterocycles through 1,3-dipolar cycloaddition reactions using ninhydrin, 1,2-phenylenediamine, amino acids, 3-cyanoacetyl indoles and aryl aldehydes is described. The features of this procedure were characterized by the mild reaction conditions, high yields, one-pot procedure, and operational simplicity.