Hyperfine structure and isotope shift of some even parity levels in the YbI spectrum

Using laser induced fluorescence spectroscopy the hyperfine structure of the even parity levels 4f ¹⁴6s6d ³ D ₁, 4f ¹⁴ 6s8s ³ S ₁ and 4f ¹³ 5d6s6p (7/2, 5/2)J=1,2,3 as well as of the odd parity level 4f ¹⁴ 6s6p ³ P ₂ in neutral ytterbium has been investigated. The isotope shift of the transitions 4f ¹⁴6s6p ³ P ₀ → 4f ¹⁴ 6s6p ³ D ₁ and 4f ¹⁴ 6s6p ³ P ₂ → 4f ¹⁴ 6s8s ³ S ₁, 4f ¹³ 5d6s6p (7/2, 5/2)J=1,2,3 could be measured with high accuracy. The results for the 4f ¹⁴ 6s6p ³ D ₁ level show a considerable influence of second order effects of the hyperfine interaction. The isotope shifts of the 4f ¹⁴ 6s8s ³ S ₁ and 4f ¹³ 5d6s6p (7/2, 5/2)J=1 levels indicate a possible configuration mixing for these levels.     

Iridodials: enantiospecific synthesis and stereochemical assignment of the pheromone for the golden-eyed lacewing, Chrysopa oculata

1R,2S,5R,8R; 1R,2S,5R,8S; 1S,2S,5R,8R; and 1S,2S,5R,8S-Iridodials have been prepared in five steps from 4aS,7S,7aR and 4aS,7S,7aS-nepetalactones, major components of catnip oil. 1R,2S,5R,8R-Iridodial has been identified as a male-produced male-aggregation pheromone for Chrysopa oculata, the first pheromone of any kind identified for lacewings.     

Calixarene coated gold nanoparticles as a novel therapeutic agent

In the current study, gold nanoparticles (AuC6NPs and AuC8NPs) were prepared through sodium borohydride reduction method by using Calix[6]rene and Calix[8]rene as a stabilizing agents. The synthesized AuNPs were screened for cytotoxic, phytotoxic, antifungal and antibacterial activities. The fabricated AuNPs were characterized by UV–visible spectroscopy, atomic force microscopy (AFM) and FTIR spectroscopy. Antibacterial activities of the AuNPs were tested against E. coli and S. aureus. The AuC6NPs were found to be effective against the growth of gram positive bacteria and inhibited the growth of S. aureus. AuC6NPs interact with bacterial cell and damaged cell membrane. Roughness of the bacterial surface and membrane rupture can be clearly observed by AFM images. The AuNPs possess insignificant antifungal activity against Aspergillus niger and Candida albicans. Moreover, AuC8NPs have significant phytotoxicity and moderate cytotoxicity.     

On the line intensity ratios of prominent Si II,Si III,and Si IV multiplets

Line intensities of singly, doubly and triply ionized silicon (Si II, Si III, and Si IV, respectively) belonging to the prominent higher multiplets, are of interest in laboratory and astrophysical plasma diagnostics. We measured these line intensities in the emission spectra of pulsed helium discharge. The Si II line intensity ratios in the 3s3p²²D–3s²4p²P^o, 3s²3d²D–3s²4f²F^o, and 3s²4p²P^o–3s²4d²D transitions, the Si III line intensity ratios in the 3s3d³D–3s4p³P^o, 3s4p³P^o–3s4d³D, 3s4p³P^o–3s5s³S, 3s4s³S–3s4p³P^o, and 3s4f³F^o–3s5g³G transitions, and the Si IV line intensity ratios in the 4p²P^o–4d²D and 4p²P^o–5s²S transitions were obtained in a helium plasma at an electron temperature of about 17,000 ± 2000 K. Line shapes were recorded using a spectrograph and an ICCD camera as a highly-sensitive detection system. The silicon atoms were evaporated from a Pyrex discharge tube designed for the purpose. They represent impurities in the optically thin helium plasma at the silicon ionic wavelengths investigated. The line intensity ratios obtained were compared with those available in the literature, and with values calculated on the basis of available transition probabilities. The experimental data corresponded well with line intensity ratios calculated using the transition probabilities obtained from a Multi Configuration Hartree–Fock approximation for Si III and Si IV spectra. We recommend corrections of some Si II transition probabilities.     

Numerical method of non-isothermal curve analysis by means of electrical resistance measurement during cooling

The temperature-dependence of the electrical resistance of Al-Zn 78 wt.% was measured during linear cooling of the samples in the range of eutectoidal decomposition. The resulting resistancevs. temperature curves were analysed by:

deriving the temperature-dependence of the volume fractionx(T) of theη precipitate;

fitting the theoretical functionx(T)=x _h (T)+x _c (T) following from numerical integration of the reaction rate equations for the simultaneously occurring homogeneous (H) and cellular (C) precipitation processes.

As a result, the activation energiesE _h andE _c , the JMA exponentsn _h andn _c , the rate constantsk _h andk _c , and the critical temperaturesT _o of the two processes were estimated.     

Conversion-time curves in the diffusion-controlled free radical polymerization of styrene

In order to calculate conversion-time curve in radical polymerization, the termination rate constant for interacting polymer radicals with chain lengths n and s is written as: k_t,ns = k(ζ_n + ζ_s) where k ∝ exp(−0.40/v_f) (v_f: free volume), and ζ = 1 at n ⩽ n_c and ζ = (n_c/n)^1,5 at n ⩾ n_c + 1 (n_c: a critical chain length of polymer moving by reptation). The curves are applicable to the experimental data obtained from 20°C to 154°C in the thermal polymerization of styrene. Further, it is shown that the curves can be applied to the experimental data for polymerization in the presence of initiator.     

Theoretical and experimental analysis of the fine structure and hyperfine structure in the configurations 5p6s and 5p6p of the antimony II spectrum

From 17 transitions in the singly ionized Sb II spectrum the hyperfine structure (A andB splitting constants) of the complete excited configurations 5p6s and 5p6p were determined by means of optical interference spectroscopy. In addition, a theoretical analysis both of the fine structure and also of the hyperfine structure was carried out (in the case of 5p6p of the general typenpn′p for the first time in literature). For the 3 levels 5p6p ³ P ₁, 5p7p ³ D ₂ and 5p6p ¹ P ₁ a different classification was found and consistent values for the fine structure parameters, mixing coefficients and single electron hyperfine structure splitting parametersa _nl ^ik andb _nl ^ik were obtained. The three new determinations in Sb II of the quadrupole moment (in barn) of¹²¹Sb (Q(5p6s)=?0.55(5);Q(5p6p)=?0.57(5) from the 5p-electron andQ(5p6p)=?0.7(2) from the 6p-electron) are well agreeing with each other but differ to former values from SbI. The core polarization and isotope shift of the lines, however, are compatible with our former results in SbI.     

Reaction of ferrocenecarboxylic acid with N,N-disubstituted carbodiimides: synthesis, spectroscopic and X-ray crystallographic analysis of N,N-disubstituted N-ferrocenoylureas and identification of a one-pot coupling reagent for the formation of ferrocenecarboxamides in a non-aqueous solvent

N,N^′-dicyclohexyl-N-ferrocenoylurea 2, N,N^′-diisopropyl-N-ferrocenoylurea 3, N,N^′-di-p-tolyl-N-ferrocenoylurea 4 and N,N^′-di-tert-butyl-N-ferrocenoylurea 5 were obtained by reaction of ferrocenecarboxylic acid 1 with N,N^′-dicyclohexylcarbodiimide (DCC), N,N^′-diisopropylcarbodiimide (DIC), N,N^′-di-p-tolylcarbodiimide 10 and N,N^′-di-tert-butylcarbodiimide 11, respectively. Both N-tert-butyl-N^′-ethyl-N-ferrocenoylurea 6 and N^′-tert-butyl-N-ethyl-N-ferrocenoylurea 7 were obtained by reaction of 1 with N-tert-butyl-N^′-ethylcarbodiimide 12. In all cases a small amount of ferrocenecarboxylic anhydride 8 was formed as a by-product. All compounds were characterized by ¹H NMR, ¹³C NMR, IR and MS. Single crystal X-ray structural analyses were made of 2, 3 and 4. From the consistent results, the reaction products of 1 with carbodiimides appear different from those proposed by some earlier workers. With N-(3-dimethylaminopropyl)-N^′-ethylcarbodiimidehydrochloride 9 ferrocenoylurea was not isolated, but the main product was rather 8. The suitability of 8 as acylation reagent was applied by using 9 to obtain N-(3-triethoxysilyl)-propylferrocenecarboxamide in a one-pot reaction from 1 and 3-(triethoxysilyl)-propylamine.     

Subsolidus phase relations and crystal structures of R-Ca-Cu-O (R=Nd, Sm, Gd, Tm) systems

The subsolidus phase relations of R₂O₃-CaO-CuO ternary systems (R=Nd, Sm, Gd, Tm) have been investigated by X-ray powder diffraction. All samples were synthesized at about 950° in air. There exists a ternary compound Ca_14−xR_xCu₂₄O₄₁ (x = 4 for R=Nd, Gd and x = 5 for R = Sm) and a ternary solid solution Ca_2+xR_2−xCu₅O₁₀ (R=Nd, Sm, Gd, Tm) with a wide composition range Δx of about 0.6. The compound Ca_14−xR_xCu₂₄O₄₁ possesses a layered orthorhombic structure and is isostructural to Sr_14−xCa_xCu₂₄O₄₁. The lattice parameters a and c of the compound are basically independent of the ionic radius of R, while the lattice parameter b and unit-cell volume V decrease substantially with the decrease of the ionic radii of R. The Ca_2+xR_2−xCu₅O₁₀ solid solution is isostructural to Ca_2+xY_2−xCu₅O₁₀, the structure of which is based on an orthorhombic “NaCuO₂-type” subcell containing infinite one-dimensional chains of edge-shared square planar cuprate groups crosslinked by the layered cations Ca and R that locate in the inter-chain tunnels.     

Hyperfine structure in the configurations4f 4 6s 2 and4f 4 5d 6s of Nd I

The high resolution laser-atomic-beam technique was used to investigate the hyperfine structure in Nd I 4f ⁴6s ^{2 5} I,⁵ F,⁵ S and 4f ⁴5d6s ⁷ L,⁷ K,⁷ I,⁷ H. The metastable states were populated by an arc discharge burning in the atomic beam. The measured hyperfine constantsA andB of the levels of 4f ⁴6s ² and 4f ⁴5d6s allow a parametric analysis to be performed using the effective tensor operator formalism. The experimental radial integrals of the 4f and 5d electrons fit with those of the other lanthanides. The 4f radial integrals are in agreement with values of optimized Hartree-Fock-Slater calculations. The spectroscopic quadrupole moments of¹⁴³Nd and¹⁴⁵Nd are deduced from the 4f parameters:Q _I =?0.610(21) b and ?0.314(12) b, respectively. TheQ _I resulting from the 5d parameter are in satisfactory agreement with these values. The hyperfine anomaly due to thes electron in 4f ⁴5d 6s amounts to about 1%.     

Application of the modified van der waals equation for unsaturated vapour and liquid states

The Law-Lielmezs (L-L) modification of the Van der Waals equation of state: P = RT/(V-b)-a(T)/V² where: a(T) = a(T_c)·a(T_c·a(T¹) and: a(T¹) = 1 + pT^1q has been extended to include unsaturated states in terms of a correcting function C_f(such that the α(T¹) term becomes: a(T¹) = 1 + _pC_fT^1q The proposed extension has been compared with the results obtained by the use of the original Van der Waals equation of state.     

Synthesis and properties of S,R-alternating octinaphthalenes

(S,R,S,R,S,R,S)- and (S,R,S,S,S,R,S)-octinaphthalenes were synthesized by oxidative coupling of (S,R,S)-quaternaphthalene, and differences due to axis chirality of (S,R,S,R,S,R,S)-, (S,R,S,S,S,R,S)-, (S,S,S,R,S,S,S)-, and (S,S,S,S,S,S,S)-octinaphthalenes were compared using the R_f values on TLC, specific optical rotations, ¹H NMR chemical shifts of the hydroxy groups, and CD spectra. A clear CD additivity was found in the Δ? values of the ¹L_a transition around 290 nm, which are proportional to the difference between the numbers of S and R binaphthalene units.     

A methodology to define the Cubic Equation of State of a simple fluid

A method to define the Cubic Equation of State (CES) of a simple substance is presented in this work. CES is constructed with only three parameters of the fluid, namely, the critical compressibility Z_c≡P_cv_c/RT_c, the acentric factor ω ≡ − log  (P^(sat)/P_c) − 1 (where P^(sat) is the saturated vapor pressure), and the saturated vapor volume v^(sat) at the temperature T^(sat)/T_c = 0.7 (where T_c is the critical temperature, v_c is the critical volume, and P_c is the critical pressure). The resulting CES is unique for each substance and, in general, it is different from other known CES in the literature.     

Syntheses, structures, and vibrational spectroscopy of the two-dimensional iodates Ln(IO3)3 and Ln(IO3)3(H2O) (LnYb, Lu)

The reaction of Lu³⁺ or Yb³⁺ and H₅IO₆ in aqueous media at 180 °C leads to the formation of Yb(IO₃)₃(H₂O) or Lu(IO₃)₃(H₂O), respectively, while the reaction of Yb metal with H₅IO₆ under similar reaction conditions gives rise to the anhydrous iodate, Yb(IO₃)₃. Under supercritical conditions Lu³⁺ reacts with HIO₃ and KIO₄ to yield the isostructural Lu(IO₃)₃. The structures have been determined by single-crystal X-ray diffraction. Crystallographic data are (MoKα, λ=0.71073 Å): Yb(IO₃)₃, monoclinic, space group P2₁/n, a=8.6664(9) Å, b=5.9904(6) Å, c=14.8826(15) Å, β=96.931(2)°, V=766.99(13), Z=4, R(F)=4.23% for 114 parameters with 1880 reflections with I>2σ(I); Lu(IO₃)₃, monoclinic, space group P2₁/n, a=8.6410(9), b=5.9961(6), c=14.8782(16) Å, β=97.028(2)°, V=765.08(14), Z=4, R(F)=2.65% for 119 parameters with 1756 reflections with I>2σ(I); Yb(IO₃)₃(H₂O), monoclinic, space group C2/c, a=27.2476(15), b=5.6296(3), c=12.0157(7) Å, β=98.636(1)°, V=1822.2(2), Z=8, R(F)=1.51% for 128 parameters with 2250 reflections with I>2σ(I); Lu(IO₃)₃(H₂O), monoclinic, space group C2/c, a=27.258(4), b=5.6251(7), c=12.0006(16) Å, β=98.704(2)°, V=1818.8(4), Z=8, R(F)=1.98% for 128 parameters with 2242 reflections with I>2σ(I). The f elements in all of the compounds are found in seven-coordinate environments and bridged with monodentate, bidentate, or tridentate iodate anions. Both Lu(IO₃)₃(H₂O) and Yb(IO₃)₃(H₂O) display distinctively different vibrational profiles from their respective anhydrous analogs. Hence, the Raman profile can be used as a complementary diagnostic tool to discern the different structural motifs of the compounds.     

Structures and syntheses of layered and framework amine-bearing uranyl phosphate and uranyl arsenates

Two hydrated uranyl arsenates and a uranyl phosphate were synthesized by hydrothermal methods in the presence of amine structure-directing agents and their structures determined: (N₂C₆H₁₄)[(UO₂)(AsO₄)]₂(H₂O)₃, DabcoUAs, {NH(C₂H₅)₃}[(UO₂)₂(AsO₄)(AsO₃OH)], TriethUAs, and (N₂C₄H₁₂)(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂, PiperUP. Intensity data were collected at room temperature using MoKα X-radiation and a CCD-based area detector. The crystal structures were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (DabcoUAs, TriethUAs, PiperUP) wR₂=5.6%, 8.3%, 7.2% for all data, and R₁=2.9%, 3.3%, 4.0%, calculated for 1777, 5822, 9119 unique observed reflections (|F_o|?4σ_F), respectively. DabcoUAs is monoclinic, space group C2/m, Z=2, a=18.581(1), b=7.1897(4), c=7.1909(4) Å, β=102.886(1)°, V=936.43(9) Å³, D_calc=3.50 g/cm³. TriethUAs is monoclinic, space group P2₁/n, Z=4, a=9.6359(4), b=18.4678(7), c=10.0708(4) Å, β=92.282(1)°, V=1790.7(1) Å³, D_calc=3.41 g/cm³. PiperUP is monoclinic, space group Pn, Z=2, a=9.3278(4), b=15.5529(7), c=9.6474(5) Å, β=93.266(1)°, V=1397.3(1) Å³, D_calc=4.41 g/cm³. The structure of DabcoUAs contains the autunite-type sheet formed by the sharing of vertices between uranyl square bipyramids and arsenate tetrahedra. The triethylenediammonium cations are located in the interlayer along with two H₂O groups and are disordered. Both TriethUAs and PiperUP contain sheets formed of uranyl pentagonal bipyramids and tetrahedra (arsenate and phosphate, respectively) with the uranophane sheet-anion topology. In TriethUAs, triethlyammonium cations are located in the interlayer. In PiperUP, the sheets are connected by a uranyl pentagonal bipyramid that shares corners with phosphate tetrahedra of adjacent sheets, resulting in a framework with piperazinium cations and H₂O groups in the cavities of the structure.     

Divalent transition metal phosphonates with new structure containing hydrogen-bonded layers of phosphonate anions

A series of divalent transition metal phosphonates containing hydrogen-bonded layers of phosphonate anions, namely [M(phen)₃]·C₆H₅PO₃·11H₂O [M=Co(1), Ni(2), Cu(3)] and [Cd(phen)₃]·C₆H₅PO₃H·Cl·7H₂O (4) have been synthesized, structurally characterized by single-crystal X-ray diffraction method. These compounds all crystallize in the triclinic system, space group P-1. The lattice parameters are a=12.1646(5), b=12.4155(6), c=15.4117(10) Å, α=78.216(2), β=79.735(3), γ=77.8380(3)°, V=2205.1(2) Å³, Z=2 for 1; a=12.097(2), b=12.606(3), c=15.742(3) Å, α=76.66(3), β=80.04(3), γ=77.75(3)°, V=2263.4(8) Å³, Z=2 for 2; a=12.058(2), b=12.518(3), c=15.781(3) Å, α=77.77(3), β=80.02(3), γ=77.91(3)°, V=2255.5(8) Å³, Z=2 for 3 and a=12.47680(10), b=12.6693(2), c=16.1504(3) Å, α=82.600(1), β=71.122(1), γ=77.355(1)°, V=2352.37(6) Å³, Z=2 for 4. All structures are refined by full-matrix least-squares methods [for 1, R1=0.0602 using 6458 independent reflections with I>2σ(I); for 2, R1=0.0632 using 4657 independent reflections with I>2σ(I); for 3, R1=0.0634 using 6221 independent reflections with I>2σ(I); for 4, R1=0.0400 using 7930 independent reflections with I>2σ(I)]. In the crystal structures, the phenylphosphonate anions and water molecules are hydrogen-bonded to form layers, and there exist the cationic species [M(phen)₃]²⁺ between the adjacent layers of anions and water. Luminescence, thermal analysis as well as IR spectroscopic studies are also presented.     

Semiclassical variational study of size effects in neutral and charged jellium droplets

An analytic expression for the total energy of metallic clusters composed ofN identical atoms of valencev and with net chargeQ is obtained by means of a variational solution of the Thomas-Fermi-Weizsäcker energy density functional within the spherical jellium model. The minimum energy is given as an expansion in decreasing powers of the cluster radiusR=r _s Z ^1/3, withZ=vN andr _s the radius per electron of the bulk metal. The coefficients are obtained as functions ofr _s . Terms of volume (R ³), surface (R ²), curvature (R), constant (R ⁰), (1/R) and (1/R ²) are clearly separated in the formula, as well as the different contributions (kinetic, coulombic and exchange-correlation) to each of them. The asymptotic values (R→∞) for the work functions,W(r _s ), and surface energies σ(r _s ), are compared to analogous semiclassical and Kohn-Sham calculations of jellium-like surfaces and to the experimental values. The size dependent behaviour of chemical potentials, μ(R), electron affinities,AF(R), and ionization potentials,IP(R), are easily obtained for any kind of metallic clusters. In particular we discuss the Coulomb and quantum corrections to the coefficients β, δ in the asymptotic formulae:IP?W+β/R andAF?W+δ/R.     

Excess molar quantities of (a halogenated n-alkane + an n-alkane) A comparative study of mixtures containing either 1-chlorobutane or 1,4-dichlorobutane

Excess molar volumes V_m^E at 298.15 K were obtained, as a function of mole fraction x, for series I: {x1-C₄H₉Cl + (1 ? x)n-C_lH_{2l + 2}}, and II: {x1,4-C₄H₈Cl₂ + (1 ? x)n-C_lH_{2l + 2}}, for l = 7, 10, and 14. 10, and 14. The instrument used was a vibrating-tube densimeter. For the same mixtures at the same temperature, a Picker flow calorimeter was used to measure excess molar heat capacities C_{p, m}^E at constant pressure. V_m^E is positive for all mixtures in series I: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.277 for l = 7, 0.388 for l = 10, and 0.411 for l = 14. For series II, V_m^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆} is small and S-shaped, the maximum being situated at x_max = 0.178 with V_m^E(x_max)/(cm³ · mvl^?1) = 0.095, and the minimum is at x_min = 0.772 with V_m^E(x_min)/(cm³ · mol^?1) = ?0.087. The excess volumes of the other mixtures are all positive and fairly large: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.458 for l = 10, and 0.771 for l = 14. The C_{p, m}^Es of series I are all negative and |C_{p, m}^E| increases with increasing l: at x = 0.5, C_{p, m}^E/(J · K^?1 · mol^?1) is ?0.56 for l = 7, ?1.39 for l = 10, and ?3.12 for l = 14. Two minima are observed for C_{p, m}^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆}. The more prominent minimum is situated at x′_min = 0.184 with C_{p, m}^E(x′_min)/(J · K^?1 · mol^?1) = ?0.62, and the less prominent at x″_min = 0.703 with C_{p, m}^E(x″_min)/(J · K^?1 · mol^?1) = ?0.29. Each of the remaining two mixtures (l = 10 and 14) has a pronounced minimum at low mole fraction (x_min = 0.222 and 0.312, respectively) and a broad shoulder around x = 0.7.     

J and term dependences in the isotope shift of Eu I

High-resolution laser atomic beam spectroscopy has been applied to studyJ and term dependences in the isotope shift of the levels 4f ⁷5d6s a ¹⁰ D _J ,a ⁸ D _J of Eu I. A parametric analysis of the isotope shift has been performed. TheJ dependence is interpreted through two term-dependent parametersz _5d , and the term dependence through one parameterΔT:z _5d (a ¹⁰ D)=44.1 (2.6) MHz,z _5d (a ⁸ D)=55.9 (2.3) MHz,ΔT=408.5 (3.2) MHz. Ab initio Hartree-Fock and Dirac-Fock calculations have been made to interpret these parameters. Within the accuracy of the calculations the parameters can be attributed to field shift effects.