Highly diastereoselective chemoenzymatic synthesis of (2′R)- and (2′S)-2′-deoxy[2′-H]guanosines

In an effort to develop an efficient synthetic method of highly diastereoselective (2′R)- and (2′S)-2′-deoxy[2′-²H]guanosines, chemoenzymatic conversion was investigated. The synthesis of (2′R > 98% de)-2′-deoxy[2′-²H]guanosine was achieved by biological transdeoxyribosylation using (2′R > 98% de)-2′-deoxy[2′-²H]uridine, 2,6-diaminopurine, and Enterobacter aerogenes AJ-11125, followed by treatment with adenosine deaminase. (2′S > 98% de)-2′-Deoxy[2′-²H]guanosine was synthesized from (2′S > 98% de)-2′-deoxy[2′-²H]uridine and 2,6-diaminopurine using thymidine phosphorylase and purine nucleoside phosphorylase instead of E. aerogenes AJ-11125.     

Regioselective synthesis of 1H,3H,6H[2]benzopyrano[4,3-d]pyrimidine-2,4-diones and 12H-benzopyrano[3,2-c][1]benzopyran-5-ones by radical cyclization

5-Hydroxy uracils or 4-hydroxy[1]benzopyran-2-ones were refluxed with 2-bromobenzyl bromides in acetone in the presence of anhydrous potassium carbonate to afford a number of 5-(2′-bromobenzyloxy) pyrimidine-2,4-dione (80-92%) or 4-(2′-bromobenzyloxy) benzopyran-7-ones (70-82%) respectively. These were then refluxed with tri-n-butyltin chloride and sodium cyanoborohydride in the presence of a catalytic amount of azobisisobutyronitrile (AIBN) for 3-4 h to give 1H,3H,6H [2]benzopyrano[4,3-d]pyrimidine-2,4-diones (75-85%) or 12H-benzopyrano[3,2-c][1]benzopyran-5-ones (70-85%) respectively.     

Synthesis of substituted dipyrido[3,2-a:2′,3′-c]phenazines and a new heterocyclic dipyrido[3,2-f:2′,3′-h]quinoxalino[2,3-b]quinoxaline

Three new α,α′-diimine ligands were synthesized based on condensation of 1,10-phenanthroline-5,6-dione with 1,2-phenylenediamine derivatives using different approaches. All compounds were fully characterized by IR, ¹H and ¹³C NMR, UV-visible, and MS spectroscopies. We report the first example of a dipyrido[3,2-f:2′,3′-h]quinoxalino[2,3-b]quinoxaline, which exhibits a strong absorption at 430 nm and an interesting electrochemical behavior. These new molecules may have biological potential and are of synthetic and technological importance.     

Synthesis of novel 3′-spirocyclic-oxindole derivatives and assessment of their cytostatic activities

The synthesis of some novel 3′-spirocyclic-oxindole compounds, based on the spiro[indole-3,5′-isoxazolidin]-2(1H)-one, the 2′H-spiro[indole-3,6′-[1,3]oxazinane]-2,2′(1H)-dione and the 2′H-spiro[indoline-3,3′-pyrrolo[1,2-c][1,3′]oxazine]-1′,2(1H)-dione heterocyclic structures, is described. These compounds were prepared from methyl α-(2-nitrophenyl)acrylate via [1,3]-dipolar cycloaddition reactions with two acyclic nitrones and one cyclic nitrone followed by reduction of the cycloadducts and then treatment with triphosgene. Two of these compounds showed significant cytostatic activity on three cancer cell lines with GI₅₀ values of 2.6-4.1 μM on the human breast cancer cell line, MCF-7.     

Au(I)/Ag(I)-catalyzed annulation of sugar aldehyde tethered with 3-phenylprop-2-yn-1-yl ether with aryl amines for the pyrano[4,3-b]quinoline derivatives

Aryl amines undergo smooth annulation with O-phenylpropynyl sugar aldehyde in the presence of the Ph₃PAuCl (10 mol %)/AgSbF₆ (10 mol %) catalytic system to afford the corresponding tetrahydro-3aH-spiro[[1,3]dioxolo[4″,5″:4′,5′]furo[3′,2′:5,6]pyrano[4,3-b]quinoline-2,1′-cyclohexane] derivatives in good yields and selectivity.     

Reactivity of ZrCl4 and HfCl4 with silylamines and thermal decomposition of the compounds [MCl4{NH(R)(SiR′3)}] (M = Zr,Hf, R = tBu,R′ = Me; R = SiR′3 = SiMe3, SiMe2H)

The Lewis acid/base adducts [MCl₄{NH(R)(SiR′₃)}] (M = Zr, Hf; R = tBu, R′ = Me; R = SiR′₃ = SiMe₃, SiMe₂H) were synthesized by the 1:1 reaction of MCl₄ with NH(R)(SiR′₃) in dichloromethane solution at room temperature. The decomposition of [MCl₄{NH(R)(SiR′₃)}] proceeds with the elimination of R′₃SiCl, as shown by thermogravimetric analysis. Pyrolysis of the compounds at 620 °C under inert conditions (N₂, vacuum) afforded powders of composition [ClMN] or [Cl₂MNH]. Preliminary low pressure chemical vapour deposition experiments show that [MCl₄{NH(R)(SiR′₃)}] deposits thin films of metal nitride contaminated with metal oxide.     

One-pot synthesis of novel spiro 2,3,7,8-tetrahydro-benzo[1,2-b:5,4-b′]dipyran-4,6-dione and 2,3,8,9-tetrahydro-benzo[1,2-b:4,3-b′]dipyran-4,10-dione derivatives

An efficient synthesis of novel spiro 2,3,7,8-tetrahydro-benzo[1,2-b:5,4-b′]dipyran-4,6-dione and 2,3,8,9-tetrahydro-benzo[1,2-b:4,3-b′]dipyran-4,10-dione derivatives in high yields under microwave irradiation is described. The reaction was also studied under conventional heating conditions.     

Synthesis and characterization of rhenium(I) complexes with the polypyridinic quinone functionalized electron acceptor ligand [3,2-a:2′,3′-c]-benzo[3,4]-phenazine-11,16-quinone, Nqphen

In this work, the synthesis and characterization of fac-[Re(CO)₃(Nqphen)(L)]PF₆ complexes is reported. Nqphen is the quinone substituted acceptor ligand [3,2-a:2′,3′-c]-benzo[3,4]-phenazine-11,16-quinone, and L represents the donor monodentate pyridine substituted ligands 4-tert-butylpyridine (t-Bupy), 4-methoxypyridine (MeO-py) or 10-(4-picolyl)phenothiazine (py-PTZ). The complexes were synthesized by refluxing in methanol the metal precursor fac-Re(CO)₃(Nqphen)TfO (TfO = trifluoromethanesulphonate anion) with the corresponding L ligand. The UV-Vis spectra of the complexes are dominated by intense intraligand (IL) bands, and less intense metal ligand charge transfer (MLCT) bands with maxima in the 380-400 nm region. The IR shows the typical pattern for tricarbonyl Re complexes with facial (fac) geometry. An additional v(CO) stretching band, attributed to the quinone fragment of Nqphen, is observed.Electrochemical data indicate that the acceptor capacity of Nqphen is increased in the complexes with regard to the free ligand. This effect is sensitive to the nature of the L ligand, following the order: MeO-py < t-Bupy < py-PTZ, indicating therefore that the donor capacity of L affects the rest of the molecule. The results obtained for the fac-[Re (CO)₃(Nqphen)(pyPTZ)]PF₆ complex here reported were compared with those observed for the homologous complex fac-[Re(CO)₃(Aqphen)(L)]^0/+, with Aqphen = 12,17-dihydronaphtho[2,3-h]dipyrido[3,2-a:2′,3′-c]-phenazine-12,17-dione, and L = Cl⁻, TfO⁻, py-PTZ.     

2,2′-Bipyridine-6,6′-diyl bisnitroxide as a paramagnetic host: Encapsulation of a zinc(II) ion

A chelate complex of zinc(II) and 2,2′-bipyridine-6,6′-diyl bis(tert-butyl nitroxide) (bpybNO) with a metal/ligand ratio of 1/2 was structurally characterized to be [Zn(bpybNO)₂][Zn(hfac)₃]₂, where Hhfac stands for 1,1,1,5,5,5-hexafluoropentane-2,4-dione. The magnetic susceptibility measurement indicates the presence of considerable antiferromagnetic interaction among the four S = 1/2 spins. The exchange parameter J was estimated as 2J/k_B = −103(1) K, on the basis of a tetrahedral coupling model. The antiferromagnetic coupling is stronger after complexation than before. The density-functional theory calculation on related model compounds supports the present analysis and clarified the role of the zinc ion as a superexchange coupler.     

Oxidative addition of (PhSe)2 and (FcSe)2 to zerovalent palladium and platinum trialkylphosphine complexes (Fc = ferrocenyl, [Fe(η-C5H5)(η-C5H4)])

Room temperature reaction of [Pd₂(dba)₃]/PR₃ or [Pt(C₂H₄)(PR₃)₂] (dba = dibenzylideneacetone; R = Et, Bu) with the diselenides (R′Se)₂ (R′ = Ph, Fc) yielded the oxidative addition products trans-[M(SeR′)₂(PR₃)₂] (M = Pd, Pt). These have been characterised by multinuclear NMR and UV-Vis spectroscopy, mass spectrometry, and, in the cases of trans-[Pt(SePh)₂(PR₃)₂] (R = Et, Bu) and trans-[Pt(SeFc)₂(PBu₃)₂], also by X-ray crystallography.     

Synthesis of pyrido and pyrazinodithienodipyrimidine-4,8(3H,9H)-dione derivatives by the aza-Wittig methodology

A one-pot synthesis of the hitherto unreported pyrido[5″,6″:4,5;3″2″:4′,5′]dithieno[3,2-d:3′,2′-d′]dipyrimidine-4,8(3H,9H)-dione 6a-o and pyrazino[5″,6″:4,5;3″2″:4′,5′]dithieno[3,2-d:3′,2′-d′]dipyrimidine-4,8(3H,9H)-dione 6p-y pentaheterocyclic systems, based on the tandem aza-Wittig heterocumulene-mediated annulation strategy is described.     

Effect of spacer insertion in a commonly used dithienosilole/benzothiadiazole-based low band gap copolymer for polymer solar cells

Dithienosilole-benzothiadiazole based low bandgap copolymers remain promising material for organic photovoltaics. A new copolymer, poly[(4,4′-dioctyldithieno[3,2-b:2′,3′-d]silole-2,6-diyl)-alt-{4,7-bis[2-(3-hexyl)thienyl]-2,1,3-benzothiadiazole-5,5′-diyl}] (PDTSDTBT) was designed by introducing a thiophene spacer bearing a hexyl chain at β-position in the main backbone and compared to its analog poly[(4,4′-dioctyldithieno[3,2-b:2′,3′-d]silole-2,6-diyl)-alt-(2,1,3-benzothiadiazole-4,7-diyl)] (PDTSBT). In PDTSDTBT, linear alkyl chains on silicon were chosen due to facile and cheap access and the inserted 3-hexylthiophene units were chosen to increase solubility and molar mass, a weak point with PDTSBT. The two parameters are important to optimize photovoltaic performances. To compare characteristics, PDTSDTBT of molar masses greater than, and equal to a sample of PDTSBT, were prepared. Pd-catalyzed Stille cross-coupling reactions in a micro-wave reactor to promote an efficient copolymerisations. A strong absorption ranging from 370 nm to 800 nm and a good thermal stability were observed. PDTSDTBT showed better solubility and higher degree of crystallinity. Facile synthesis of high molar masses meant that higher efficiencies, around 40% greater, could be obtained with PDTSDTBT. The polymer was demonstrated to be susceptible to improvement through the use of device-additives. For example, under initial optimisations using PDTSDTBT:PC₆₀BM blend at a ratio of 1:1 delivered a power conversion efficiency of 2.13% with J_SC = 7.73 (mA/cm²), under AM 1.5 (100 mW/cm²) illumination.     

InCl3-catalyzed three-component reaction: a novel synthesis of dihydropyrano[3,2-b]chromenediones under solvent-free conditions

Three-component coupling (3CC) of kojic acid, aldehyde and 1,3-dione has been achieved in the presence of 10 mol % InCl₃ under solvent-free conditions to afford the corresponding dihydropyrano[3,2-b]chromenedione derivatives in good yields. This is the first example of the condensation of kojic acid, aldehyde and 1,3-diones to provide a novel series of kojic acid derivatives.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Design and synthesis of fluorescent 6-aryl[1,2-c]quinazolines serving as selective and sensitive ‘on-off’ chemosensor for Hg in aqueous media

Three fluorescent quinazolines thiophen-2-yl-5,6-dihydrobenzo-[4,5]imidazo[1,2-c]quinazoline (1), pyridin-3-yl-5,6-dihydrobenzo-[4,5]imidazo-[1,2-c]quinazoline (2) and phenyl-5,5′,6,6′-dihydrobenzo-[4,4′,5,5′]imidazo-[1.1′,2-c,2′-c]quinazoline (3) have been synthesized. Structures of 1 and 3 have been authenticated crystallographically. Quinazolines 1-3 exhibit highly selective ‘on-off’ switching for Hg²⁺ ions. The fluorescence intensity displayed a linear relationship with respect to Hg²⁺ concentration (0.1-1.0 μM; R² = 0.99) with detection limit of 2.0 × 10⁻⁷ M.     

Compressibility of CaZrO3 perovskite: Comparison with Ca-oxide perovskites

The evolution of the unit-cell parameters of CaZrO₃ perovskite, an orthorhombic perovskite belonging to space group Pbnm, have been determined to a pressure of 8.7 GPa at room temperature using single-crystal X-ray diffraction measurements. A fit of a third-order Birch-Murnaghan equation of state to the pressure-volume data yields values of V₀=258.04(2) Å³, K_T0=154(1) GPa and K₀′=5.9(3). Although CaZrO₃ perovskite does not exhibit any phase transitions in this pressure range, the compression of the structure is anisotropic with [010] approximately 20% less compressible than either [100] or [001]. Compressional moduli for the unit cell parameters are: K_a0=142(1) GPa and K_a0′=4.4(2), K_b0=177(2) GPa and K_b0′=9.4(5), K_c0=146(2) GPa and K_c0′=5.4(4). Comparison with other orthorhombic Ca-oxide perovskites shows that there is systematic increase in compressional anisotropy with increasing distortion from cubic symmetry.     

Synthesis of terpyridine-substituted calix[n]arenes

Calix[n]arenes (n = 4,5) comprising 4-(2,2′:6′,2″-terpyridyl)-phenyl substituents at the upper rim were synthesized for the first time, employing Suzuki-type coupling reactions. All calix[n]arene derivatives were prepared as cone conformers. The single crystal X-ray structure of cone-5,11,17,23-tetra{4-(2,2′:6′,2″-terpyridyl)-phenyl}-25,26,27,28-tetrabutoxycalix[4]arene 4 is analyzed in terms of structural rigidity and potential use of these ligands as novel synthons of cage-type metallosupramolecular assemblies.     

Synthesis of a new bidentate ferrocenyl N-heterocyclic carbene ligand precursor and the palladium (II) complex trans-[PdCl2(CfcC)], where (CfcC) = 1,1′-di-tert-butyl-3,3′-(1,1′-dimethyleneferrocenyl)-diimidazol-2-ylidene

A new ferrocenyl-N-heterocyclic carbene ligand precursor 1,1′-bis[(1-tert-butylimidazolium)-3-methyl]ferrocene dichloride has been synthesised and structurally characterised. The imidazolium salt was readily deprotonated in situ with KN(SiMe₃)₂ and reacted with [PdCl₂ (cod)] to afford the structurally characterised palladium (II) complex trans-[PdCl₂(C^∧fc^∧C)], where (cod) = 1,5-cyclooctadiene and (C^∧fc^∧C) = 1,1′-di-tert-butyl-3,3′-(1,1′-dimethyleneferrocenyl)-diimidazol-2-ylidene.     

Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Synthesis of novel fluorescent benzo[a]pyrano[2,3-c]phenazine and benzo[a]chromeno[2,3-c]phenazine derivatives via facile four-component domino protocol

An efficient and practical route to novel fluorescent benzo[a]pyrano[2,3-c]phenazine framework has been developed by one-pot, four-component reaction of 2-hydroxynaphthalene-1,4-dione, 1,2-phenylenediamines, aromatic aldehydes, and Meldrum’s acid in glacial acetic acid at 70 °C. Photophysical studies of these compounds have been reported. Reactions involving cyclohexane-1,3-dione/5-methylcyclohexane-1,3-dione/dimedone in the place of Meldrum’s acid yielded corresponding benzo[a]chromeno[2,3-c]phenazine derivatives. Crystal structure of 3k established the regioisomer formed. Mild reaction conditions, good yields, short reaction time, and easy separation are some of the salient features of the present protocol.