Aminoborohydrides 15. The first mild and efficient method for generating 2-(dialkylamino)-pyridines from 2-fluoropyridine

[reaction: see text] Lithium aminoborohydride (LAB) reagents promote the amination of 2-fluoropyridine under mild reaction conditions, providing 2-(dialkylamino)pyridines in excellent yield and purity. Treatment of 2-fluoropyridine with 1.1 equiv of lithium aminoborohydride at room temperature affords complete conversion after 1 h. This is the first general way by which 2-(dialkylamino)pyridines may be directly obtained from fluoropyridines under ambient reaction conditions. 2-Chloropyridine can also be converted to 2-(dialkylamino)pyridine by simply increasing the number of LAB equivalents and the reaction temperature.     

Deprotonation of chloropyridines using lithium magnesates

4-Chloropyridine was deprotonated on treatment with 1/3 equiv of the highly coordinated magnesate Bu₃(TMP)MgLi₂ in THF at −10 °C, as evidenced by trapping with I₂. The use of Bu(TMP)₂MgLi in Et₂O allowed the reaction of 2-chloropyridine, giving the 3-functionalized derivative as the main product. Mixtures of 3- and 4-functionalized derivatives were obtained when 2,6-dichloropyridine was involved in the reaction. Performing the reaction on 3-chloropyridine with lithium magnesates in THF, either the 4,4′-dimer or the 4-iodo derivative was formed after quenching by I₂, the former using 1/3 equiv of Bu₂(TMP)MgLi and the latter using 1 equiv of (TMP)₃MgLi. Similar results were observed with 3,5-dichloropyridine, 2,5-dichloropyridine and 3-chloro-2-fluoropyridine. 1,2-Migration of the lithium arylmagnesate formed by deprotonation was proposed to justify the dimers formation.     

Ir-catalyzed asymmetric allylic amination using chiral diaminophosphine oxides

An Ir-catalyzed asymmetric allylic amination using chiral diaminophosphine oxide is described. Asymmetric allylic amination of terminal allylic carbonates proceeded in the presence of 2 mol % of Ir catalyst, 2 mol % of chiral diaminophosphine oxide, 5 mol % of NaPF₆, and BSA, affording the chiral branched allylic amines in up to 95% ee.     

Mechanistic competition variations due to the substituents in the lithium carbenoid promoted cyclopropanation reactions

The cylcopropanation reactions of the LiCH₂X (X = F, Cl, Br and I) carbenoids with ethylene were investigated at the CCSD(T)/6-311G^∗∗//B3LYP/6-311G^∗∗ level of theory along two reaction pathways: methylene transfer and carbometalation. There exists a competition between these two reaction pathways for the different substituted lithium carbenoids. Interestingly, the substituent has different effect on the methylene transfer and carbometalation pathways. The trend of the activation energies for the methylene transfer pathway is LiCH₂F (9.8 kcal/mol) > LiCH₂Cl (7.6 kcal/mol) ≈ LiCH₂Br (7.4 kcal/mol) ≈ LiCH₂I (7.5 kcal/mol), whereas the activation energies for the carbometalation pathway increases in this order: LiCH₂F (6.1 kcal/mol) < LiCH₂Cl (7.1 kcal/mol) < LiCH₂Br (8.2 kcal/mol) < LiCH₂I (8.5 kcal/mol). The different effect mainly arises from that the substituent of the lithium carbenoid influences the hybridization character of the C¹ atom. The mechanistic competition varies due to the different substituents of the lithium carbenoids during the cyclopropanation reactions. This result is revelatory for us to control mechanistic competition to obtain target product by modifying the substituents of the lithium carbenoids.     

Microwave-assisted amination of 3-bromo-2-chloropyridine with various substituted aminoethanols

A simple method for microwave-assisted amination of 3-bromo-2-chloropyridine with various substituted aminoethanols is described. The reaction was carried out under microwave irradiation conditions (at 180 °C for 1-2 h) and the result was superior in terms of conversion and yield when compared to that of the corresponding conventional heating conditions.     

New Gilman-type lithium cuprate from a copper(II) salt: synthesis and deprotonative cupration of aromatics

Deprotonative cupration of aromatics including heterocycles (anisole, 1,4-dimethoxybenzene, thiophene, furan, 2-fluoropyridine, 2-chloropyridine, 2-bromopyridine, and 2,4-dimethoxypyrimidine) was realized in tetrahydrofuran at room temperature using the Gilman-type amido-cuprate (TMP)₂CuLi in situ prepared from CuCl₂·TMEDA through successive addition of 1 equiv of butyllithium and 2 equiv of LiTMP. The intermediate lithium (hetero)arylcuprates were evidenced by trapping with iodine, allyl bromide, methyl iodide, and benzoyl chlorides, the latter giving the best results. Symmetrical dimers were also prepared from lithium azine and diazine cuprates using nitrobenzene as an oxidative agent.     

Lithium ions determination by selective pre-concentration and differential pulse anodic stripping voltammetry using a carbon paste electrode modified with a spinel-type manganese oxide

The use of selective pre-concentration and differential pulse anodic stripping voltammetry (DPASV) using a carbon paste electrode modified (CPEM) with spinel-type manganese oxide has been proposed for the determination of lithium ions content in natural waters. The new procedure is based on the effective pre-concentration of lithium ions on the electrode surface containing spinel-type Mn(IV) oxide with the reduction of Mn(IV) to Mn(III) and consequently the lithium ions intercalation (insertion) into the spinel structure. The best DPASV response was reached for an electrode composition of 25% (m/m) spinel-type MnO₂ in the paste, 0.1 mol l⁻¹ tris(hydroxymethyl)aminomethane (TRIS) buffer solution of pH 8.3, scan rate of 5 mV s⁻¹, accumulation potential of 0.3 V versus saturated calomel reference electrode (SCE), pre-concentration time of 30 s and potential pulse amplitude of 50 mV. In these experimental conditions, the proposed methodology responds to lithium ions in the concentration range of 2.8×10⁻⁶ to 2.0×10⁻³ mol l⁻¹ with a detection limit of 5.6×10⁻⁷ mol l⁻¹. The determination of the lithium ions content in different samples of natural waters samples using the proposed methodology and atomic absorption spectrophotometry are in agreement at the 95% confidence level and within an acceptable range of error.     

Rapid microwave-assisted preparation of amino-functionalized polymers

Two different methods for the rapid microwave-assisted amination of halide-functionalized polymers were investigated. Nucleophilic substitution by phthalimide, followed by ring opening with methylamine to liberate the free amine, afforded amino-substituted polymers with up to 76% conversion. The second method involves nucleophilic substitution with azide ions and subsequent treatment with triphenylphosphine. The latter method was found to be more efficient, with up to 99% conversion in favourable cases and with a reaction time of 2 × 30 min.     

Experimental measurement and modeling of solubility of LiBr and LiNO3 in methanol, ethanol, 1-propanol, 2-propanol and 1-butanol

The solubility of lithium bromide and lithium nitrate in solvents methanol, ethanol, 1-propanol, 2-propanol and 1-butanol were measured in the range between 298.15 and 338.15 K using an analytical gravimetric method. An empirical equation was used to fit the experimental solubilities and the Pitzer model with inclusion of Archer's ionic strength was used for the calculation of osmotic coefficients. The experimental data of system pressures (p) for the correlation of LiBr + ethanol, LiBr + 2-propanol at T (298.15-333.15 K) and LiNO₃ + ethanol at T (298.15-323.15 K) were obtained from published literatures. Moreover, the parameters of the Pitzer model were re-correlated and were used to predict mean ion activity coefficients. A procedure was also presented to predict the solubility products of salts in pure organic solvent.     

Electrophilic amination of diorganozinc reagents by oxaziridines

Electrophilic amination of organozinc reagents by oxaziridines has been studied. Diorganozinc reagents R₂Zn (R = alkyl or aryl) react with N-Boc oxaziridine to afford N-Boc protected primary amines BocNHR in moderate to good yields. No additives are needed in this reaction, which proceeds at 0 °C. We suggest that the presence of two heteroatoms in oxaziridine allows Lewis base activation of the diorganozinc reagent.     

Physical and electrolytic properties of difluorinated dimethyl carbonate

The physical and electrolytic properties of difluorinated dimethyl carbonate (DFDMC) synthesized using F₂ gas (direct fluorination) were examined. The dielectric constant and viscosity of DFDMC are higher than those of monofluorinated dimethyl carbonate (MFDMC) and dimethyl carbonate (DMC). The oxidative decomposition voltage of DFDMC is higher than those of DMC and MFDMC. The specific conductivity in DFDMC solution is considerably lower than those in MFDMC and DMC solutions. The ethylene carbonate (EC)-DFDMC equimolar binary solution containing 1 mol dm⁻³ LiPF₆ shows a moderate conductivity of 6.91 mS cm⁻¹ at 25 °C. The lithium electrode cycling efficiency (charge-discharge coulombic cycling efficiency of lithium electrode) in EC-DFDMC equimolar binary solution containing 1 mol dm⁻³ LiPF₆ is higher than 80%. The EC-DFDMC solution is a good electrolyte for rechargeable lithium batteries.     

Self-standing single lithium ion conductor polymer network with pendant trifluoromethanesulfonylimide groups: Li diffusion coefficients from PFGSTE NMR

Solid electrolyte materials have the potential to improve performance and safety characteristics of batteries by replacing conventional solvent-based electrolytes. For this purpose, new candidate single ion conductor self-standing networks were synthesized with trifluoromethane-sulfonylimide (TFSI) lithium salt based monomer using poly(ethyleneglycol) dimethacrylate (PEGDM 750) as crosslinker. The highest ionic conductivity was 3.4 × 10⁻⁷ S cm⁻¹ at 30 °C in the dry state. Thermal and mechanical analyses showed good thermal stability up to 190 °C and rubbery-like properties at ambient temperature. A direct relationship between ionic conductivity and glassy or rubbery state of the membranes was found. Vogel–Tammann–Fulcher behavior was observed in the dry state which is consistent with a lithium conductivity correlated with polymer chain mobility. By swelling the network in propylene carbonate, a self-standing electrolyte gel could be obtained with an ionic conductivity as high as 1 × 10⁻⁴ S cm⁻¹ at 30 °C. The individual diffusion coefficients of mobile species in the material (¹⁹F and ⁷Li) were measured and quantified using pulsed-field gradient nuclear magnetic resonance (PFG-NMR). Diffusion coefficients for the most mobile components of the lithium cations and fluorinated anions at 100 °C in dry membranes have been found to be 3.4 × 10⁻⁸ cm² s⁻¹ and 2.1 × 10⁻⁸ cm² s⁻¹ respectively.     

Lithium enolates from a (−)-quinic acid-derived cyclohexanone with a β-alkoxy leaving group: regioselective preparation and evaluation of enolate stability towards β-elimination

Deprotonation of a (−)-quinic acid-derived ketone {(2S,3S,4aR,8R,8aS)-8-[(tert-butyl(dimethyl)silyl)oxy]-2,3-dimethoxy-2,3-dimethylhexahydro-1,4-benzodioxin-6(5H)-one} using lithium hexamethyldisilazide (LHMDS) at −78 °C gave one regioisomeric enolate. The regiocontrol is governed by the axial β-silyloxy substituent and the resulting lithium enolate is stable towards β-elimination at temperatures up to −40 °C. It was found that the axial β-silyloxy group could be conveniently eliminated using 2.1 equiv of LHMDS at 0 °C for 1 h and that an equatorial β-alkoxy group was much more resistant to β-elimination. A chiral lithium amide base was used to overturn the inherent regioselectivity of ketone deprotonation with LHMDS.     

Reductive amination of aldehydes and ketones to their corresponding amines with N-methylpyrrolidine zinc borohydride

A simple and convenient procedure for reductive amination of aldehydes and ketones using N-methylpyrrolidine zinc borohydride (ZBHNMP) as a reducing agent is described. The reactions are carried out with 1 equiv of amine and 1 equiv of aldehyde or ketone using 1 equiv of ZBHNMP in methanol under neutral conditions at room temperature.     

Direct synthesis of primary arylamines via C-N cross-coupling of aryl bromides and triflates with amides

Aryl halides and triflates are coupled with primary amides to give the corresponding arylamines in the presence of a palladium catalyst, a suitable ligand, and a base. The catalyst system performs well for a large number of different substrates at 100-150 °C without solvent, and with low catalyst levels (0.12 mol % Pd). Nicotinamide might be useful as a nitrogen source in the Pd-catalyzed amination reaction.     

Efficient palladium catalysts for the amination of aryl chlorides: a comparative study on the use of phosphium salts as precursors to bulky, electron-rich phosphines

Alkyl-di-(1-adamantyl)phosphonium salts are practical ligand precursors for the palladium-catalyzed amination of aryl chlorides. In the presence of typically 0.5 mol% Pd(OAc)₂ and 1 mol% of ligand precursor a variety of activated and deactivated aryl chlorides can be aminated in good to excellent yield (73-99%). Applying optimized conditions catalyst turnover numbers up to 10,000 have been achieved.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Measurement of pH by NMR Spectroscopy in Concentrated Aqueous Fluoride Buffers

An NMR spectroscopic technique has been developed to give rapid, accurate pH measurements on tenth-milliliter samples of concentrated acidic aqueous solutions buffered by fluoride ion in the pH 1.5-4.5 range. The fluoride ¹⁹F chemical shift has been calibrated as a function of pH at 0.1 and 1.0 M concentration by reference to an internal 3-fluoropyridine standard. Subsequent measurements of fluoride buffer pH required no additives and only two NMR spectra in the presence of an external reference standard.     

A tetraethylene glycol dimethylether-lithium bis(oxalate)borate (TEGDME-LiBOB) electrolyte for advanced lithium ion batteries

Tetraethylene glycol dimethylether-lithium bis(oxalate)borate (TEGDME-LiBOB) electrolyte is here studied. Electrochemical impedance spectroscopy (EIS) measurements demonstrate that the electrolyte has conductivity higher than 10^− 3 S cm^− 1 at room temperature and about 10^− 2 S cm^− 1 at 60 °C, while thermogravimetry indicates a stability extending up to 180 °C. Sweep voltammetry of the electrolyte shows anodic stability extending over 4.6 V vs. Li and cathodic peak at about 1.5 V vs. Li/Li⁺, caused by a decomposition of LiBOB salt, and following prevented by using a pre-treated Sn-C anode. Furthermore, LiFePO₄ electrode is successfully used as cathode in a lithium cell using the TEGDME-LiBOB electrolyte. The promising electrochemical results, the low cost and the very high safety level candidate the electrolyte here reported as a valid alternative to the conventional electrolyte based on fluorinated salts presently used in the lithium ion battery field.     

Ion chromatographic determination of hydrolysis products of hexafluorophosphate salts in aqueous solution

In this work, hydrolysis of three different hexafluorophosphate salts in purified water was investigated. Aqueous samples of lithium hexafluorophosphate (LiPF₆), sodium hexafluorophosphate (NaPF₆) and potassium hexafluorophosphate (KPF₆) were prepared and stored for different times. Ion chromatography (IC) with UV as well as non-suppressed and suppressed conductivity detection was used for the analysis of the reaction products. For the detection and identification of the formed decomposition products, an IC method using IonPac AS14A 250 mm × 4.0 mm i.d. column and 2.5 mM KHCO₃–2.5 mM K₂CO₃ eluent was established. Besides hexafluorophosphate, four other anionic species were detected in fresh and matured aqueous solutions. The hydrolysis products fluoride (F⁻), monofluorophosphate (HPO₃F⁻), phosphate (HPO₄²⁻) and difluorophosphate (PO₂F₂⁻) were found and were unambiguously identified by means of standards or electrospray ionization mass spectrometry (ESI-MS). It was shown that stability of hexafluorophosphate solutions depends on the nature of the counter ion and decreases in the order potassium > sodium > lithium.