Potentiometric determination of penicillins with ion-selective electrodes

Quaternary ammonium, phosphonium and arsonium membrane electrodes sensitive to benzylpenicillin, ampicillin and oxacillin have been investigated. The order of merit of electrode performance is cetyltrioctylammonium> cetyltrioctylphosphonium> cetyltrioctylarsonium. The electrodes are suggested for use in rapid determination of penicillin drugs by direct potentiometry.     

The response of halide ion-selective electrodes to redox systems : A comparison between silver/silver halide electrodes and silver sulphide- based halide ion-selective electrodes

Silver/silver chloride and bromide electrodes, prepared by anodizing ordinary silver electrodes, and the corresponding ion-selective electrodes based on silver sulphide, were tested for their susceptibility towards redox systems. It proved that the latter type of electrode responded significantly to strong oxidants. In contrast, the silver/silver halide types were highly resistant to redox interference provided that the silver halide layer was free from open pores. This could be achieved by generation of sufficiently thick layers and by selection of suitable current densities during electrodeposition (<20 mA cm^-2). The interrelation between the conditions of silver chloride film generation and redox resistance of the resulting electrodes is described in detail.     

Calixarene-based potentiometric ion-selective electrodes for silver

Four lipophilic sulphur and/or nitrogen containing calixarene derivatives have been tested as ionophores in Ag(I)-selective poly (vinyl chloride) membrane electrodes. All gave acceptable linear responses with one giving a response of 50 mV/dec in the Ag(I) ion activity range 10(-4)-10(-1)M and high selectivity towards other transition metals and sodium and potassium ions. This ionophore was also tested as a membrane coated glassy-carbon electrode where the sensitivity and selectivity of the conventional membrane electrode was found to be repeated. The latter electrode was then used in potentiometric titrations of halide ions with silver nitrate.     

Bio-sensors based on ion-selective electrodes

Summary A review is given on bio-sensors based on ion-selective electrodes. By means of several examples of enzyme electrodes the salient features and the operating principles of the new sensors are illustrated. 72 literature references.

---

Biosensoren auf der Grundlage von ionenselektiven Elektroden

Zusammenfassung Ein Überblick über Biosensoren wird gegeben. An Hand mehrerer Beispiele von Enzymelektroden werden die entscheidenden Eigenschaften und die prinzipielle Arbeitsweise dieser neuen Sensoren dargestellt. 72 Literaturzitate.

     

Lead ion-selective membrane electrodes based on some recently synthesized 9,10-anthraquinone derivatives

Four different 9,10-anthraquinone derivatives were studied to characterize their abilities as lead ion carrier in PVC membrane electrodes. The electrode based on 1,8-dihydroxy-2,7-bis(prop-2′-enyl)-9,10-anthraquinone exhibits a Nernstian response for Pb²⁺ ions over a wide concentration range (2.0×10⁻³–2.0×10⁻⁶ M). The response time of the sensor is 30 s and the membrane can be used for more than four months without observing any deviation. The electrode revealed comparatively good selectivities with respect to alkali, alkaline earth and some transition and heavy metal ions. It was used as an indicator electrode in potentiometric titration of sulfate ions with a lead ion solution.     

Potentiometric gas sensors for ammonia based on ion-selective electrodes for silver (1), copper (11) and mercury-(11).

Potentiometric gas sensors sensitive to ammonia were prepared with ionselective electrodes for silver(I), copper(II) or mercury(II). These electrodes measure the degree of the complexation between the metal ions and ammonia. Ammonia concentrations above 10^-3.5M can be measured by these sensors. The response to changes in ammonia concentrations is rapid. The Ag⁺- and Cu²⁺-based sensors gave a response of approximately $\text{100 mV}\text{log[NH}{}_3\text{]}$ while the Hg²⁺-based sensor gave a $\text{60 mV}\text{log [NH}{}_3\text{]}$ response.     

Coated-wire silver ion-selective electrode based on silver complex of cyclam.

A coated-wire ion-selective electrode (ISE) based on cyclam (1,4,8,11-tetraazacyclotetradecane) as a neutral carrier in a polyvinyl chloride (PVC) matrix was fabricated for the determination of Ag(I) ions. The coated-wire ISE exhibited a linear Nernstian response over the range 1 x 10(-1) to 1 x 10(-7) M with a slope of 59 +/- 2 mV per decade change and a detection limit of 5 x 10(-8) M. The ISE shows a greater preference for Ag over other cations with good precision. The electrode was selective towards Ag(I) ions in the presence of 13 different metal ions tested. The selectivity coefficients (K(ij)) were determined for Na(I), K(I), Mg(II), Ca(II), Ba(II), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II) and Hg(II). The selectivity coefficients of these cations are in the range of 10(-4) to 10(-2). This ISE was used for the determination of free silver and total silver in electroplating bath solutions, additives and brighteners.     

An XPS investigation of silver bromide-coated ion-selective electrodes

XPS data of AgBr-coated ion-selective electrodes exposed to high concentrations of Ag⁺, Cl⁻, Br⁻, I⁻, and NH₃ revealed a change in the surface properties of the original electrode. A 40 min to one week exposure of the silver bromide ion-selective electrode surface to solutions containing high concentrations of chloride ions leads to the formation of a mixed halide layer, as the chloride ions are incorporated in the surface. Exposure to high concentrations of iodide-containing solutions results in a new silver iodide layer on top of the original silver bromide laver. Silver ions diffuse to the newly formed layers. NH₃ results in the rapid degradation of the AgBr surface as the diamine complex, Ag(NH₃)⁺₂, is formed.     

Complexes of a tridentate ONS Schiff base. Synthesis and biological properties

Several new complexes of a tridentate ONS Schiff base derived from the condensation of S-benzyldithiocarbazate with salicylaldehyde have been characterised by elemental analyses, molar conductivity measurements and by i.r. and electronic spectra. The Schiff base (HONSH) behaves as a dinegatively charged ligand coordinating through the thiolo sulphur, the azomethine nitrogen and the hydroxyl oxygen. It forms mono-ligand complexes: [M(ONS)X], [M=Ni^II, Cu^II, Cr^III, Sb^III, Zn^II, Zr^IV or U^VI with X = H₂O, Cl]. The ligand produced a bis-chelated complex of composition [Th(ONS)₂] with Th^IV. Square-planar structures are proposed for the Ni^II and Cu^II complexes. Antimicrobial tests indicate that the Schiff base and five of the metal complexes of Cu^II, Ni^II, U^VI, Zn^II and Sb^III are strongly active against bacteria. Ni^II and Sb^III complexes were the most effective against Pseudomonas aeruginosa (gram negative), while the Cu^II complex proved to be best against Bacillus cereus (gram positive bacteria). Antifungal activities were also noted with the Schiff base and the U^VI complex. These compounds showed positive results against Candida albicans fungi, however, none of them were effective against Aspergillus ochraceous fungi. The Schiff base and its zinc and antimony complexes are strongly active against leukemic cells (CD₅₀ = 2.3–4.3 μg cm⁻³) while the copper, uranium and thorium complexes are moderately active (CD₅₀ = 6.9–9.5 μg cm⁻³). The nickel, zirconium and chromium complexes were found to be inactive. This revised version was published online in June 2006 with corrections to the Cover Date.     

Selective uranyl ion detection by polymeric ion-selective electrodes based on salphenH2 derivatives

The new ion-selective electrodes (ISEs) based on salphenH₂ derivatives such as N,N′-(propylenedioxy)benzenebis(salicylideneimine) L¹ and N,N′-4,5-(propylenedioxy)benzenebis(3,5-di-tert-butylsalicylideneimine) L² as cation carriers are developed for a uranyl ion. The combination of these new ionophores with tris(2-ethylhexyl)phosphate (TEHP) as a plasticizer particularly shows near Nernstian slope in the wide concentration range (1.0 × 10⁻⁶ to 1.0 × 10⁻² M) of UO₂²⁺ and is observed well in the pH range from 1.0 to 5.0 with a response time less than 20 s. Since the employed ionophores were confirmed to form well-defined stable 1:1 complexes with UO₂²⁺, the observed high selectivity for a uranyl ion over the other cations was attributed to the selective complexation as well as the lipophilic behavior of these ligands especially for L². The proposed electrodes offered practically low detection limit of 6.5 × 10⁻⁷ M and reasonably good end-points within experimental error were obtained when the sensor was used as an indicator electrode for the potentiometric titration.     

Schiff base derivatives of lanthanons

Bifunctional tridentate Schiff bases such as, $$\begin{gathered} HOC_6 H_4 C(CH_3 ) : NCH_2 CH_2 OH, \hfill \\ HOC_6 H_4 C(CH_3 ) : NCH_2 CH_2 (OH)CH_3 , \hfill \\ HOC_6 H_4 C(H) : NCH_2 CH_2 OH \hfill \\ \end{gathered} $$ and HOC₆H₄C(H)∶NCH₂CH(OH)CH₃ react with La(III), Pr(III) and Nd(III) isopropoxides to 1∶1 and 2∶3 derivatives of the type,Ln(O?i-C₃H₇)(OC₆H₄C[R]∶NR′O) andLn ₂(OC₆H₄C[R]∶ NR′O)₃ [where,Ln=La(III), Pr(III) or Nd(III); R=CH₃ or H and R′=CH₂?CH₂ or CH₂CHCH₃] in dry benzene. The labile nature of the isopropoxy groups in the 1∶1 derivatives has been shown by exchange reactions with an excess oft-butyl alcohol leading to the formation ofLn(O?t-C₄H₉)(OC₆H₄C[R]∶NR′O); (where R=CH₃ and R′=CH₂CHCH₃) type derivatives in almost quantitative yield. The IR spectra of the resulting derivatives have been recorded in the range of 4000–400 cm^?1, ν C=N frequency bands appear at ≈ 1620 cm^?1 and almost no change has been noted in their positions on complexation. Some new peaks are, however, observed in the range of 700–600 cm^?1 and these may be ascribed to the ring deformation coupled with both theLn?O stretching and C?CH₃ stretching modes.     

Potentiometric responses of ion-selective electrodes after galvanostatically controlled incorporation of primary ions

A new method of quantitative incorporation of primary cations into ion-selective membrane by means of galvanostatic cathodic polarization/conditioning, before measurement step, was proposed and tested on the example of potassium-selective electrode with ionophore - valinomycin in poly(vinyl chloride) based membrane and with polypyrrole solid contact. Open circuit potential values recorded after polarization can be quantitatively explained by changes of primary cations and ionophore concentration in the surface part of the membrane. The influence of potassium ions concentration in the membrane (in relation to ion exchange sites amount) on the shape of potentiometric calibration plots was also observed. Improved characteristics, with extended linear range, can be obtained for membrane of minor loading with primary cations (around 25%), the responses are relatively stable in course of following calibrations.     

Mercury(II) ion-selective polymeric membrane sensor based on a recently synthesized Schiff base

A new polyvinyl chloride (PVC) membrane electrode that is highly selective to Hg(II) ions was prepared by using bis[5-((4-nitrophenyl)azo salicylaldehyde)] (BNAS) as a suitable neutral carrier. The sensor exhibits a Nernstian response for mercury ions over a wide concentration range (5.0×10⁻²-7.0×10⁻⁷ M) with a slope of 30±1 mV per decade. It has a response time of <10 s and can be used for at least 3 months without any measurable divergence in potential. The electrode can be used in the pH range from 1.0 to 3.5. The proposed sensor shows fairly good discriminating ability towards Hg²⁺ ion in comparison with some hard and soft metals. The electrode was used in the direct determination of Hg²⁺ in aqueous solution and as an indicator electrode in potentiometric titration of mercury ions.     

A potentiometric sensor of silver ions based on the Schiff base of diphenol

A potentiometric sensor based on the Schiff base 2,2′-(1E,1′E)-(1,1′-binaphthyl-2,2′-diylbis(azan-1-yl-1-ylidene))bis(methan-1-yl-1-ylidene)diphenol was synthesized and tested as an ionophore PVC-based membrane sensor selective towards silver ions (Ag⁺). Potentiometric testing demonstrated the high affinity of this receptor to silver ions. Seven membranes were fabricated with different compositions, with best performance shown by that with an ionophore composition (w/w) of 1.0?mg, PVC 33.0?mg, 2-nitrophenyl octyl ether 66?mg, and potassium tetrakis(p-chlorophenyl)borate 50?mol% in 1.0?mL tetrahydrofuran. The sensor worked well over a wide range of concentrations (1.0?×?10^?2 to 1.0?×?10^?6?M Ag⁺) at pH?6, showing a slope of 60.99?mV/dec with rapid response times of less than 3?s. The sensor also showed good selectivity towards Ag⁺ in the presence of interfering cations, with the highest selectivity coefficient observed for Hg²⁺ (2.7). A low detection limit of 3.4?×?10^?7?M Ag⁺ was established.     

Cyanide ion-selective electrodes based on thin electroplated membranes of silver chalcogenides: Part I. Membrane preparation and characterization

Cyanide-responsive ion-selective electrodes have been developed based on thin tellurium-doped silver selenide membranes electrodeposited on platinum substrates. The chemical composition of the electroplated film membranes could be expressed by the general formula Ag_2+δSe_1?xTe_x (where 0.2 < δ < 0.8 and 0.2 ? × ? 0.1). These electrodes exhibit a linear response in cyanide solutions with concentrations ranging from 10^?2 to 10^?6 M, with a slope of the electrode function of about 90 mV (pCN)^?1 (i.e., lower than the theoretically predicted double-Nernstian slope). These electrodes showed very stable behaviour during long-term investigation (several months). The conditions for the electrochemical preparation of cyanide-responsive silver chalcogenide membranes are discussed both from theoretical and practical points of view. X-ray diffraction, energy-dispersive x-ray fluorescence microanalysis (EDAX) and scanning electron microscopy (SEM) were used to examine the membrane composition, structure and surface morphology.     

Potentiometric behavior of N,N,N',N'-tetrabenzylmethylenediamine-based hydrogen ion-selective electrodes

H(+)-ion selective electrodes (H(+)-ISE) based on N,N,N',N'-tetrabenzylalkylenediamine (alkylene: methylene, ethylene, propylene, hexylene) are prepared. We are compared with their response potentials to carbon numbers between diamino groups. They were showed linear selective to hydrogen ion in the range of pH 1.5-9.0, 2.5-9.0, 3.5-9.0 and 4.0-9.0, and their Nernstian slopes were 57.3, 53.5, 57.4 and 56.1 mV pH(-1) at 20+/-0.2 degrees C (theoretical value: 58.2 mV pH(-1)), respectively. The interference effect on the cations were measured to alkali metal ions, alkaline earth metals ions. Selectivity coefficients were measured by the mixed-solution method. Among all electrodes the N,N,N',N'-tetrabenzylmethylenediamine (TBMDA)-based electrode has shown the best selectivity in acidic solution.     

Potentiometric membrane electrode for salicylate based on an organotin complex with a salicylal Schiff base of amino acid.

A novel salicylate-selective electrode based on an organotin complex with a salicylal Schiff base of amino acid salicylaldehydeaminoacid-di-n-butyl-Sn(IV) [Sn(IV)-SAADB] as ionophore is described, which exhibits high selectivity for salicylate over many other common anions with an anti-Hofmeister selectivity sequence: Sal- > PhCOO- > SCN- > Cl04- > I- > NO3- > NO2- > Br- > Cl- > CH3COO-. The electrode, based on Sn(IV)-SAADB, with a 30.44 wt% PVC, a 65.45 wt% plasticizer (dioctyl phthalate, DOP), a 3.81 wt% ionophore and a 0.3 wt% anionic additive is linear in 6.0 x 10(-6) - 1.0 x 10(-1) mol l(-1) with a detection limit of 2.0 x 10(-6) mol l(-1) and a slope of 62.0 +/- 1.2 mV/decade of salicylate concentration in a phosphate buffer solution of pH 5.5 at 25 degrees C. The influence on the electrode performances by lipophilic charged additives was studied, and the possible response mechanism was investigated by UV spectra. The electrode was applied to medicine analysis and the result obtained has been satisfactory.     

Determination of some halogen osmium-carbonyl derivatives using ion-selective electrodes

Summary The concentrations of certain halogen derivatives of osmium carbonyls were determined potentiometrically by using a silver ion-selective electrode based potentiometric titration technique. In case of the series Os₃(CO)₁₂X₂, X= Cl, Br, I, inflections in the titration curves were at volumes of AgNO₃ corresponding to one halide ion. In contrast, the series Os₃(CO)₁₀X₂ gave inflections equivalent to two X^– ions. The concentrations of trans-Cl₂Os(CO)₄ as well as ClSnPh₃ were also determined by this technique. Standard deviations were in the range of 0.1%–0.37%, recoveries between 98% and 99.7%.

---

Bestimmung einiger Halogenosmiumcarbonylverbindungen mit Hilfe von ionenselektiven Elektroden

     

Potentiometric behavior of ion-selective electrodes to large cationic species modulated by decyl alcohol

The effect of 1-decanol on the potentiometric response of three ion-selective electrodes to large cationic species is analyzed. The electrodes were constructed with plasticized PVC membranes. The results suggest that 1-decanol alters the ionic transport through the membrane/water interface to an extent that depends on the strength of the active ion pair. The water solubility of the cation, its molecular weight, and the size of the ion pair seem to be relevant factors in this type of behavior. The potentiometric selectivity coefficients are also dependent on the presence of 1-decanol in the membrane. These results are similar to those already described in ion-selective electrodes with membranes capable of sensing anionic benzene sulfonate-type systems. Thus, the effect of the alcohol appears to be general by affecting mainly the membrane surface polarity.