Synthesis of new chiral calix[4]arene diamide derivatives for liquid phase extraction of α-amino acid methylesters

The synthesis of chiral diamide derivatives of calix[4]arene from the reaction of p-tert-butylcalix[4]arene diester 1a and calix[4]arene diester 1b with various amino alcohols were reported. The ¹H and ¹³C NMR, data showed that the compounds synthesized exist in the cone conformation. The extraction study properties of these new compounds 3a,b–4a,b towards some selected α-amino acid methylesters are also reported.     

Complexation and DFT studies of lanthanide ions by (2-pyridylmethoxy)homooxacalixarene derivatives

The binding of lanthanide cations by 2-pyridylmethoxy derivatives of p-tert-butyldihomooxacalix[4]arene (1b), in the cone conformation, and p-tert-butylhexahomotrioxacalix[3]arene (2b), in both cone and partial cone conformations, was studied. These properties were assessed by extraction studies of the metal picrates from water into dichloromethane and stability constant measurements in methanol and acetonitrile, using spectrophotometric and microcalorimetric techniques. Proton NMR titrations with La³⁺ and Yb³⁺ cations were done in order to get information on the binding sites. Computational methods (density functional theory (DFT) calculations) were also used to complement the NMR data. The p-tert-butylcalix[4]arene analogue (3b) was also studied, and the results of the four ligands were compared. Partial cone-2b is the best extractant for lanthanide ions, showing some preference for the heavy lanthanides. In complexation, all four ligands show the same trend and a high selectivity for Yb³⁺ (ML, log β ≥ 7). Besides the formation of ML complexes, ML₂ species were also obtained. In most cases, these species were corroborated by the proton NMR studies. For partial cone-2b with Pr³⁺ the complexation process is enthalpically driven, whereas for 3b the formation of the ML₂ species with this cation is due to a favourable entropy term. DFT studies indicate that ligand 3b forms the most stable complex with La³⁺, followed by partial cone-2b.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

p-tert-Butyldihomooxacalix[4]arene/p-tert-Butylcalix[4]arene: Transition and Heavy Metal Cation Extraction and Transport Studies by Ketone and Ester Derivatives

The binding properties of two phenylketones (2a and 3a) and two ethylesters (2b and {3b) derived from p-tert-butyldihomooxacalix[4]arene or from p-tert-butylcalix[4]arene, in the cone conformation, towards transition (Ag⁺, Ni²⁺, Cu²⁺, Co²⁺, Zn²⁺, Fe²⁺ and Mn²⁺) and heavy (Cd²⁺, Hg²⁺ and Pb²⁺) metal cations have been determined by extraction studies with metal picrates and liquid membrane transport experiments with the same salts. The affinity of these ligands for Ag⁺ has also been investigated by ¹H NMR spectroscopy. Both ketones are better extractants than the esters, and show a strong preference for Ag⁺, while Cu²⁺ is the most extracted cation with the esters. ¹H NMR titrations with AgSO₃CF₃ indicate 1 : 1 complexes for all ligands, those with ketones are more stable, on the NMR time scale, than those with esters. Both esters are good carriers for Ag⁺, and 2b exhibits the highest transport rate (4.7 mol h^-1) found until now with dihomooxacalix[4]arene derivatives.     

Structures and properties of solvated and unsolvated isopropyl functionalised calix[4]arenes

The tetra-isopropyl ethers of calix[4]arene and p-t-butylcalix[4]arene have been isolated in the cone conformation, and structurally characterised as chloroform solvates. Thermogravimetric analysis demonstrated that the parent isopropylcalix[4]arene solvate is significantly more stable than the p-t-butylcalix[4]arene analogue, retaining the solvent up to a temperature of 125°C. It was found that the calix[4]arene ether sublimes at atmospheric pressure, and solvent-free crystals appropriate for structure determination were produced at reduced pressure. The p-t-butylcalix[4]arene ether was also isolated without solvent in the lattice, but in this case the calixarene was crystallised from acetone, as sublimation did not produce crystals of sufficient quality.     

Synthetic and NMR Studies on Calix[n]Arene (n = 4,6,8) Triflates,Mesylates, and Tosylates

Abstract

The synthesis and full characterization of eight new calix[n]arene sulfonate esters including their conformational analysis were carried out. While p-tBucalix[6]arene and p-tBu-calix[8]arene esters are conformationally labile in the temperature interval of 25–100°C, p-tBu-calix[4]arene mono-and diesters were isolated as stable conformers at ambient temperature. Two 1,3-functionalised compounds of these derivatives, p-tert-butylcalix[4]arene ditriflate (5) and dimesylate (6) were shown unexpectedly high conformational stability up to 100°C by dynamic NMR measurements. The NMR measurements confirm the pinched-cone conformation for both derivatives. For the dealkylated calix[4]arene derivatives the partial cone conformer of the triesters have been obtained as major products in all cases.     

Calixarenes 11. Crystal and molecular structure ofp-tert-butylcalix[8]arene

Monoclinic prisms were obtained by slow evaporation of a pyridine solution ofp-tert-butylcalix[8]arene: space groupP2₁/c,a=20.312(3),b=23.020(2),c=20.006(6) ; =113.05(2)⁰;V=8707.6 ų;Z=4. Refinement led to anR value of 0.166 for 4231 reflections which, although high, is sufficient to establish the conformation of the molecule as a pleated loop in which the eight hydroxyl groups are arranged in a slightly undulating, almost planar, intramolecularly hydrogen bonded cyclic array. The possible inferences for the conformation ofp-tert-butylcalix[8]arene in solution are discussed. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82019.     

p-tert-Butylcalix[5]arene: a New Synthetic Pathway and Crystal Structure of the N,N-Dimethylformamide Complex

The formation of p-tert-butylcalix[5]arene by the opening ofp-tert-butyldihomooxacalix [4]arene and the addition of a monomer has beenstudied. Various facets, including the effects of bases and the nature ofthe monomer added to the p-tert-butyldihomooxacalix[4]arene, have beeninvestigated. p-tert-Butylcalix[5]arene can be prepared in yields up to30%. The structure of its 1 : 2 complex with DMF has been determinedby X-ray crystallography. Crystals are triclinic, space group P¯1, a =1428.2(3) pm, b = 1837.3(3) pm, c = 1276.1(2) pm, = 108.98(1)°, = 105.02(2)°, = 95.21(1)°, Z = 2, D _c = 1.059 kg m^-3,final R value = 0.087. The macrocycle adopts a cone conformation, one guestenclosed inside the cavity, the other one outside.     

Synthesis and structural characterization of a binuclear zirconium complex of tetraanionic p-tert-butylthiacalix[4]arene bridged by methanol

A zirconium complex with the p-tert-butylthiacalix[4]arene anion was synthesized and its crystal structure was determined by single-crystal X-ray analysis. The complex [Zr(μ₂-CH₃OH)(p-tert-butylthiacalix[4]arene)]₂·9H₂O (1) belongs to the orthorhombic system, space group Pnnm, with a?=?20.436(16), b?=?12.160(8), c?=?20.305(12)?Å, V?=?6774(7)?ų and Z?=?2. In Complex 1 zirconium coordinates to four phenolic anions of the deprotonated p-tert-butylthiacalix[4]arene and is bridged by two methanol molecules; the p-tert-butylthiacalix[4]arene adopts a cone conformation.     

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-4 ligands: synthesis and high divalent metal ion extraction selectivity

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-4 ethers in the cone conformation are synthesized with their conformation and regioselectivity verified by NMR spectroscopy. The new ligands are efficient extractants with high selectivity for Ba²⁺ in competitive solvent extraction of alkaline earth metal cations from aqueous solutions into chloroform.     

含卤素端基的单取代对-叔丁基杯[6]芳烃的合成与表征

用THF作为反应溶剂, K₂CO₃作碱, 对-叔丁基杯[6]芳烃与二溴丁烷、二溴己烷和1,4-二氯丁炔-2反应以中等产率选择性地合成了含有卤素端基的单取代对-叔丁基杯[6]芳烃2a～2c. 2a和2b可与对甲苯磺酸甲酯(MeOTs)反应高产率地得到全甲基化产物3a和3b. 通过核磁共振谱(¹H NMR)和质谱(FAB-MS)表征, 发现所有化合物都具有预期结构, 2a～2c和3b在室温下是锥式构象, 而3a没有固定构象.     

CMPO-substituted calix[6]- and calix[8]arene extractants for the separation of An/Ln from radioactive waste

Three calix[6]arene derivatives (1a-c) and two calix[8]arene derivatives (2a,b), with six and eight CMPO residues, respectively, attached to the narrow/lower rim via ether links, were synthesised. Preliminary liquid-liquid extraction studies for Eu(III) and Am(III) from aqueous nitric acid to o-nitrophenylhexyl ether reveal remarkable properties with respect to efficiency and selectivity, especially for the tert-butylcalix[6]arene derivative with a -(CH₂)₃- spacer.     

Synthesis, 1H-NMR conformational analysis and complexation studies of two di-imidazolyl acetamido p-tert-butylcalix[4]arenes

The synthesis of a new di-imidazolyl-di-methoxy acetamido p-tert-butylcalix[4]arene 4 is reported. 4 has been prepared by reacting the corresponding di-methyl ester di-methoxy derivative with histamine in 1:1 mixture of methanol: toluene. The binding properties of 4 towards alkali, alkaline earth, transition (Zn²⁺, Co²⁺) and heavy (Pb²⁺, Cd²⁺) metals have been investigated along with the complexes stoichiometries. The ¹H-NMR spectra of complexes show the location of cations in receptor 4. Partial cone conformation is observed only with strontium and calcium whereas the cone conformation is detected with most of the cations. Comparison of the complexation results with those obtained for di-imidazolyl acetamido p-tert-butylcalix[4]arene 3 missing the methyl groups is also reported.     

杯芳烃多齿水杨醛亚胺衍生物的合成

以对叔丁基杯[n]芳烃1a～1b (n＝6, 8)为原料, 经过三步反应, 以较高产率合成了一系列含多个水杨醛亚胺端基的西佛碱衍生物5a～5f. 对叔丁基杯[n]芳烃用溴乙酸乙酯进行烃基化反应, 生成杯芳烃氧代乙酸乙酯2a～2b, 后者与过量脂肪族二胺NH₂(CH₂)_mNH₂ (m＝2, 4, 6)反应, 生成含有游离氨基的杯芳烃酰胺衍生物4a～4f, 再与水杨醛在乙醇中反应生成目标产物席夫碱衍生物.     

Synthesis, Conformational Studies and Inclusion Properties of Tetrakis[(2-pyridylmethyl)oxy]thiacalix[4]arenes

An attempted O-alkylation of the flexible macrocycle 1with 2-(chloromethyl)pyridine in the presence of Cs₂CO₃ under THF reflux afforded a mixture of twoconformers of tetra-O-alkylated product 4a in a ratio of 91:9 (cone-4a:1,2-alternate-4a)in 70% yield, while other possible isomers were not observed. In the case of Na₂CO₃, there was no reaction product,only the starting compound 1, whereasonly monoalkylated compound 3 was obtained when usingK₂CO₃ as the base. The distribution of cone conformer decreased in the case of O-alkylation of tetraol 1with 4-(chloromethyl)pyridine or benzyl bromide in the presence of Cs₂CO₃ in comparison with that ofO-alkylation with 2-(chloromethyl)pyridine, while the 1,2-alternate conformer increased in the same sequence. The larger Cs⁺might increase the contribution of the metal template effect, which can hold the 2-pyridylmethyl group(s) and theoxide group(s) on the same side of the tetrathiacalix[4]arene 1 through the cation-O^- and -N-interaction in the caseof O-alkylation of tetraol 1 with 2-(chloromethyl)pyridine.Only when the template metal can hold the 2-pyridyl group(s) andthe oxide group(s) on the same side of the tetrathiacalix[4]arene is the conformation immobilized to thecone. The template effect of the cesium cation plays an important role in this alkylation reaction. The structuralcharacterization of these products is also discussed.The two-phase solvent extraction data indicated thattetrakis[(2-pyridylmethyl)oxy]thiacalix[4]arenes 4a show strong Ag⁺ affinity and a high Ag⁺ selectivity wasobserved for cone-4a. A good Job plot proves 1:1 coordination of cone-4a with Ag⁺ cation.¹H-NMR titration of cone-4a with AgSO₃CF₃ also clearly demonstrates that a 1:1complex is formed with retention of the original symmetry. In contrast, the 1,2-alternate-4a can form a 2:1 metal/thiacalix[4]arene complex and the two metal-binding sites display positive allostericity. The conformational changes ofpyridine moiety from the original outward orientation of the ring nitrogen to the inside orientation toward thethiacalixarene cavity were observed in the processof Ag⁺ complexation.     

新型多重氮杂杯[4]芳烃衍生物的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与水杨酰肼、烟酰肼、异烟酰肼反应, 合成了具有开链结构新型杯[4]多重氮杂衍生物2a～2c, 产率分别为88%, 85%和90%. 化合物1与乙二酰肼、丙二酰肼、己二酰肼反应, 得到具有桥联结构的新型杯[4]多重氮杂衍生物3a～3c, 产率分别为86%, 89%和90%. 新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-取代且采取锥式构象.     

The Preorganization Effect of the Calix[4]arene Platform on the Extraction Properties of Acetylhydrazide Groups with Transition Metal Ions

The binding properties of the cone conformer of O,O,O,O-tetrakis[hydrazinocarbonylmethyl]-4-tert-butylcalix[4]arene, the cone and the 1,3-alternate conformers of the corresponding thia analogue have been evaluated by means of liquid–liquid extraction for a large variety of metal ions. The extraction constants and the stoichiometries of the complexes formed have been determined. Comparison of the extraction properties of calix[4]arenes with their acyclic monomeric analogue clearly demonstrated, that the preorganization of acetylhydrazide groups on the calix[4]arene platform is the cause for a significant improvement of its binding properties. The presence of additional “soft” nitrogen binding sites in acetylhydrazide derivatives of calix[4]arenes compared to their amide derivatives leads to a shift from their classical selectivity for alkali and alkaline earth cations to transition metals. The cone conformer of tetrathiacalix[4]arene shows higher selectivity in a series of d-metal ions compared with its “classical” analogue. The 1,3-alternate conformer exhibits an excellent extraction selectivity for Cu²⁺ and Hg²⁺.     

New conjugates of calix[4]arenes bearing dipyridine and indolizine heterocycles

A simple route to introduce various heterocycles, derivatives of dipyridyls and indolizines on the lower rim of the para-tert-butylcalix[4]arene via ester bond formation to afford 1,3-disubstituted conjugates is described. The conformation of the new compounds and some intermolecular interactions are discussed on the basis of X-ray and NMR analyses. Preliminary complexation properties of some of the new tert-butylcalix[4]arene heterocyclic conjugates with Cu (II), Co (II) and Ni (II) were studied by means of UV–Vis titration.     

Ion-selective electrodes based on p-tert-butyl-homooxacalixarene di(ethyl)amides

The diethyl amides of p-tert-butyldihomooxacalix[4]arene (1), p-tert-butylhexahomotrioxacalix[3]arene (2) and p-tert-butylcalix[4]arene (3) were used as active materials in ion-selective membrane electrodes to check the detection of different kinds of cations (Na⁺, K⁺, Cs⁺, Mg^2 + , Ca^2 + , Mn^2 + , Cu^2 + , Zn^2 + , Cd^2 + , Pb^2 +  and tetramethylammonium cation). The electrode characteristics and selectivity coefficients were determined and compared. Optimisation of the PVC membrane composition was achieved using three different plasticisers (bis(2-ethylhexyl) adipate, o-nitrophenyl octyl ether and bis(2-butylpentyl) adipate). Amide 3 shows selectivity for Na⁺, whereas compounds 1 and 2 exhibit the highest selectivity for Pb^2 +  among all the studied cations. The X-ray crystal structure of dihomooxacalix[4]arene tetra(diethyl)amide (1) was determined, revealing it to be in the cone conformation.     

Conformations and Structures of Two Novel Upper Rim Disubstituted Derivatives of Tetra-O-alkylcalix[4]arene: The Effect of Substituents

Two new calix[4]arene derivatives, 5,17-dinitro-26,28-dimethyoxy-25,27-dipropoxycalix[4]arene (4) and 5,17-diamino-26,28-dimethyoxy-25,27-dipropoxycalix[4]arene (5), have been synthesized and fully characterized. The ¹H NMR spectra measured in different solvents and temperatures indicated that the dominant conformer is partial cone for 4 and cone for 5, though there are some variations in relative ratio of partial cone to cone conformers. The structures of partial cone 4 and cone 5 are determined by X-ray crystallography. The different conformational behavior in compounds 4 and 5 is governed by the two substituents at the upper rim. The repulsion of the dipole due to the p-nitro substituents and weak interaction between methoxy group and the inverted anisole ring in the 4 may be responsible for stabilizing the partial cone conformation.This revised version was published online in July 2005 with a corrected issue number.